San Antonio MMC 121875 BL 2-24-26 ALD-510.xlsx

This is a temperature data log from calibration testing conducted on February 24, 2026, at a San Antonio medical facility. The file documents temperature readings collected from a Steris ANSC Lab 250 sterilization system (Model: 250 Channel 1) located at 2899 Schofield Drive in San Antonio, Texas, with equipment information referenced at 1440 Prudential Drive in Dallas, Texas. The data, collected by Aldinger Co., spans from 9:16:57 AM to 10:27:31 AM over approximately one hour and eleven minutes, recording temperature measurements at two-second intervals. Temperature readings begin at 18.33°C, gradually decrease to approximately 18.15°C, then increase significantly to peak at 123.82°C around 9:43 AM before declining through a cooling cycle that returns to approximately 50.71°C by 10:26:51 AM.

The related federal solicitation W81K0027QA015, issued by the Department of the Army Medical Command (MEDCOM), is a request for quotes on calibration and temperature mapping services. This temperature log appears to represent the data deliverable or documentation produced during calibration and temperature mapping work performed on the Steris sterilization equipment at the San Antonio military medical facility. The solicitation references a Statement of Work (SOW) with multiple amendments extending submission deadlines and providing clarifications, with Amendment 4 containing answers to questions that were due October 9, 2026. This appears to be a qualification or validation test demonstrating the sterilization system's thermal performance characteristics across its operating parameters.