San Antonio MMC 121875 FR 2-24-26 ALD-511.xlsx

This file contains calibration and temperature mapping data collected on February 24, 2026, for a STERIS ANSC Lab 250 multichannel data logger (Model S09585) located at the San Antonio Medical Materiel Command facility (MMC ID: 121875) in San Antonio, Texas. The equipment, identified as serial number 0324613-15 and maintained by Aldinger Co., recorded temperature measurements at 2-second intervals over approximately one hour, beginning at 9:17:40 AM and ending at 10:22:20 AM. The data captures a complete thermal cycle, with temperatures initially stabilizing around 17.32°C, gradually rising to a peak of approximately 123.55°C around 9:51:12 AM, then declining through approximately 93.18°C around 10:15:22 AM before finally cooling back down to approximately 28.09°C by the end of the recording period.

This temperature profile appears consistent with a sterilization or validation process typical of hospital sterilization equipment, with the extended stabilization phases and controlled heating/cooling ramps suggesting a calibration or mapping verification procedure. The data would be used to validate equipment performance and ensure compliance with regulatory requirements for medical device sterilization processes. The related federal contract opportunity (Solicitation Number W81K0027QA015) issued by the Department of the Army Medical Command (MEDCOM) seeks calibration and temperature mapping services, with detailed requirements outlined in the attached Statement of Work and solicitation amendments.