Attachment_0017_-_Sample_Order_3.pdf

ATTACHMENT 0017

STATEMENT OF WORK (SOW)

FOR

FABRICATION OF THE UH-60A/L AN/AVR-2B A-KIT

FOR THE INSTALLATION OF THE LASER DETECTING

SET

SAMPLE ORDER 3

REV 1

APRIL 5, 2018

LOGISTIC SUPPORT FACILITY MANAGEMENT ACTIVITY

FFP

STATEMENT OF WORK

FOR FABRICATION OF THE UH-60A/L AN/AVR-2B A-KIT

FOR THE INSTALLATION OF THE LASER DETECTING SET

1.0 Scope

This Statement of Work (SOW) defines the effort required to deliver the quantity of 300 each

AN/AVR-2B LDS A-Kits, required to install the LDS on the UH-60A/L helicopters. This SOW also defines the requirements for packaging, labeling, and shipping for the AN/AVR-2B LDS A-

Kits.

1.1 Background

PM-UH and PM-ASE have a shared requirement for the rapid fabrication of 300 each A-Kits to support the airframe modification of the U.S. Army UH-60A/L fleet with the AN/AVR-2B Laser

Detecting Set (LDS). The AN/AVR-2B LDS A-kit is necessary for the installation of the

AN/AVR-2B LDS (B-Kit) onto UH-60A/L helicopter airframes.

1.2 Management and Administrative

The Contractor shall identify a single program management Point of Contact (POC) at the Post

Award Conference (PAC). This POC shall be responsible for ensuring successful delivery of this effort within the contracted schedule, by actively managing acquisition elements, subcontract elements, manufacturing elements, and kitting elements.

2.0 Applicable Documents

Applicable drawings are listed in the Contract Document Summary List (DSL), found at the end of this SOW.

3.0 Requirements

The contractor shall fabricate, package and ship a quantity of 300 each AN/AVR-2B LDS A-kits in accordance with (IAW) the requirements defined in this SOW. The contractor shall propose to support this work IAW the CLIN schedule defined in Attachment-1. *Note: No components of the

AN/AVR-2B LDS (B-Kit) will be procured via this requirement.

3.1 Fabrication

The contractor shall fabricate 300 each AN/AVR-2B LDS A-kits IAW the TDP defined in this

SOW. The contractor shall use the latest TDP drawing revisions when fabricating the AN/AVR-

2B LDS A-kits defined in this SOW.

3.2 Packaging

The contractor shall package 300 each AN/AVR-2B LDS A-kits IAW MIL-STD-129. The contractor shall insure a level of preservation of “B”, IAW preservation requirements and packaging requirements defined in MIL-STD-2073-1.

3.3 Labeling

The contractor shall label the first AN/AVR-2B LDS A-kit as kit number 1000, label the second kit as number 1001, label the third kit as number 1002 and continue this incremental numbering sequence for all 300 each AN/AVR-2B LDS A-kits.

3.4 Inspection and Acceptance

Government Inspection and Acceptance of end item deliverables defined in this SOW, will be made by DCMA at any of the contractor facilities (Origin/Origin) using DD Form 250 and/or an electronic equivalent in Wide Area Work Flow (WAWF).

3.5 Shipping

The contractor shall MARK FOR and SHIP TO all above items to:

LSFMA

ATTN: LSMA Cage Manager

Building Number 1234

Redstone Arsenal, AL 35898

3.6 Post Award Conference

The Contractor shall host a PAC to establish the framework of the Contractor and Government interaction during the delivery of this effort. The PAC shall be held no later than (NLT) 30 calendar days after contract award. The Contractor shall submit PAC meeting minutes and PAC briefing material in contractor format and shall submit to the awarding Procuring Contracting

Officer (PCO), NLT Five calendar days after PAC conclusion.

3.7 Travel

The contractor is NOT expected to travel during the delivery of end items defined in this SOW.

4.0 Delivery Schedule

The Contractor shall deliver AN/AVR-2B LDS A-kit IAW the delivery schedule defined in

Attachment-2. The Contractor is authorized to deliver early. **Note: For proposal purposes only, the contractor shall assume an estimated contract award date of March 2019.

5.0 Non-Availability

The contractor shall notify the PCO of any occurrence of a part number defined in the AN/AVR-

2B LDS A-Kits Technical Data Package (TDP) that is: 1) no longer available from the Original

Equipment Manufacturer (OEM) or 2) OEM has rolled to a new part number. Contractor notification to the PCO must provide: 1) a path forward to replacing the old part number with its equivalent counterpart and 2) requesting Government review and direction to allow for alternate part substitution. The contractor shall notify the PCO NLT 30 calendar days after the evidence of the above is known.

6.0 Government Furnished Property

The Government will provide Government Furnished Property (GFP), as defined in Attachment-

3. The Government will supply a quantity of 300 each 28 VDC Power Filters to be included with the AN/AVR-2B LDS A-kits defined in this SOW. This GFP will be provided to the contractor

NLT 60 calendar days after contract award.

Document Summary List (DSL)

TDP AN/AVR-2B Technical Data Package