AN_AVR-2B_Technical_Data_Package.pdf

Technical Data Package to:

Support the airframe modification of the U.S.

Army UH-60A/L fleet with the AN/AVR-2B

Laser Detecting Set (LDS)

DISTRIBUTION STATEMENT D - Distribution authorized to DOD and U.S. DOD contractors only.

STRESS

PROJECT 081124

SUPERVISOR 081124

CHECK 081124

ENGINEER 081124

DRAWN 081124

DASH NEXT ASSY USED ON N/A F/A EFF Rev Date Approved

-001 LSF0017-29031 UH60A/L 1 1 ALL A 090514 JK, JS, CC

THRU ALL B 090604 JK, JS, CC

-002 LSF0017-29031 UH60A/L 1 1 ALL C 090903 JK, JS, CC

-004 LSF0017-29031 UH60A/L 1 1 ALL D 091021 JK, JS, CC

THRU ALL E 091105 JK, JS, CC

-008 LSF0017-29031 UH60A/L 1 1 ALL F 091110 JK, JS, CC

-010 LSF0017-29031 UH60A/L 1 1 ALL G 091215 JK, JS, CC

ALL H 100303 JK, JS, CC

-004 LSF0017-29032 HH60L 1 1 ALL J 100315 MM, JS, CC

THRU ALL K 100316 MM, JS, CC

-005 LSF0017-29032 HH60L 1 1 ALL L 100526 CO, MM, CC

-007 LSF0017-29032 HH60L 1 1 ALL M 160610 JH,MH,TP

-010 LSF0017-29032 HH60L 1 1

THRU

-013 LSF0017-29032 HH60L 1 1

Notes:

TITLE:

CONTRACT:

DOC NBR:

AN/AVR-2B(V)

M

LSF001-DO0017

PLLSF0017-29050

APPLICATION BLOCK SECTION

MAIN INFORMATION SECTION

SIGNATURES SECTION

Revision History

CABLE ASSEMBLY, AN/AVR-2B(V)

PROJ NAME:

REV STATUS

KEY CODE:

CAGE CODE:

INC. ECO W000263

INC. ECO W000274

INC. ECO W000451

INC. ECO W000376

Description

INC. ECO W000051

INC. ECO W000129

INC. ECO W000162

INC. ECO W000271

INC. ECO W000326

INC. ECO W000453

INC. ECO W000474

INC. 046-ECN-0001

FIND PART NUMBER OR FIND PART NUMBER OR FIND PART NUMBER OR

NO. IDENTIFYING NUMBER NO. IDENTIFYING NUMBER NO. IDENTIFYING NUMBER

1 LSF0017-29050-001 36 B-040-22-N 71

2 LSF0017-29050-002 37 5111000632 72

3 LSF0017-29050-003 38 5111001332 73

4 LSF0017-29050-004 39 5111001932 74

5 LSF0017-29050-005 40 TMS-SCE-1/4-2.0-9 75

6 LSF0017-29050-006 41 TMS-SCE-1/2-2.0-9 76

7 LSF0017-29050-007 42 TMS-SCE-1-2.0-9 77

8 MS27472T14B35S 43 MS3475W12-3SY 78

9 MS27484T12B35PC 44 MS3475W12-3P 79

10 MS27484T12B35SC 45 M85049/24-7W 80

11 MS27474T12B35P 46 M27500/16SP1T23 81

12 MS27484T14B35P 47 M83519/1-3 82

13 MS27484T12B35S 48 M83519/2-9 83

14 MS27484T12B35P 49 M23053/8-010-0 84

15 MS3475W12-3S 50 MS25036-115 85

16 M85049/23-7W 51 LSF0017-29050-008 86

17 M85049/36-12W04 52 DELETED 87

18 M85049/37-12W04D 53 M22759/43-8-9 88 19 M85049/77-12W04 54 M7928/4-115 89

20 ISOFS150NF1404-5S 55 DELETED 90

21 M22759/43-22-9 56 DELETED 91

22 M22759/43-16-9 57 LSF0017-29050-010 92

23 M22759/43-16-0 58 LSF0017-29050-011 93

24 M22759/43-16-5 59 340FS001B14-2H32D 94

25 M27500-22SP2T23 60 LSF0017-29050-012 95

26 M27500-24SP2T23 61 LSF0017-29050-013 96

27 M17/60-RG142 62 M23053/4-103-0 97

28 M17/113-RG316 63 98

29 M7928/4-108 64 99 30 M7928/4-153 65 100

31 DELETED 66 101

32 AA59569R36T0250 67 102

33 AA59569R36T0375 68 103

34 AA59569R36T0500 69 104

35 B-020-22-N 70 105

M

PLLSF0017-29050

AN/AVR-2B(V)

FIND NO. ASSIGNED TO PART NO.

FIND NO. ASSIGNED TO PART NO. FIND NO. ASSIGNED TO PART NO.

CABLE ASSEMBLY, AN/AVR-2B(V)

KEY CODE:

-1 CONTINUED PARTS LIST

QTY FIND CAGE PART NUMBER OR NOMENCLATURE SCE

REQD NO. CODE IDENTIFYING NUMBER OR DESCRIPTION UM SPEC OR STD CODE NOTE

36 DELETED

37 DELETED

38 DELETED

40 DELETED

41 DELETED

42 DELETED

43 DELETED

1 44 LSF0017-71101-19 SPACER EA

4 45 80205 NAS9302BNS-5-05 RIVET-BLIND, 100º FLUSH HEAD, MECHANICALLY LOCKED EA

14 46 80205 NAS1149F0316P WASHER,FLAT EA

6 47 80205 NAS9301BNS-5-07 RIVET-BLIND, PROTRUDING HEAD, MECHANICALLY LOCKED EA NAS1686 2 48 80205 NAS9301BNS-5-08 RIVET-BLIND, PROTRUDING HEAD, MECHANICALLY LOCKED EA NAS1686

LSF

SEPARATE PARTS LIST

PLLSF0017-71101

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, FOR ADMINISTRATIVE OR OPERATIONAL USE, AS OF 9 JULY 2004. OTHER REQUESTS SHALL BE REFERRED TO: UTILITY HELICOPTERS PROJECT MANAGEMENT OFFICE, PROGRAM EXECUTIVE OFFICE, AVIATION, ATTN: SFAE-AV-UH (DATA MANAGER), REDSTONE ARSENAL, AL 35898-5000.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C., APP 2401, ET SEQ.) VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALITIES. DISSEMINATE IN ACCORDANCE WITH PROVISION OF DoD DIRECTIVE 5230.25.

DATE:16/06/10 REV: E

PLLSF0017-71102

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, FOR ADMINISTRATIVE OR OPERATIONAL USE, AS OF 9 JULY 2004. OTHER REQUESTS SHALL BE REFERRED TO: UTILITY HELICOPTERS PROJECT MANAGEMENT OFFICE, PROGRAM EXECUTIVE

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C., APP 2401, ET SEQ.) VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALITIES. DISSEMINATE IN ACCORDANCE WITH PROVISION OF DoD DIRECTIVE 5230.25.

DATE: 16/06/10 REV: E

CONTRACT: APVD

ENGR

CAGE CODE: ENGR

KEY CODE: DRAWN

REV STATUS STRESS

PROJ NAME: ADVMFG

1 LSF0017-71100 UH60 1 1 ALL A 09/09/04 BP JR PT

2 LSF0017-71100 UH60 1 1 ALL B 09/09/04 BP JR PT

3 LSF0017-71104 UH60 2 2 ALL C 10/03/04 BP JR PT

1 LSF0017-71100 HH60 1 1 ALL D 10/03/04 BP JR PT

2 LSF0017-71100 HH60 1 1 ALL E 16/06/10 JH MH TP

3 LSF0017-71104 HH60 2 2

Notes: 1. ULTRASONIC INSPECT MATERIAL PER ASTM B594, CLASS A.

DETAILS,SENSOR INSTL-FWD,MACH

E

PLLSF0017-71102

INC ECO W000379

INC 046-ECN-0001

INC ECO W000063

INC ECO W000189

INC ECO W000258

AVR-2B

ENGR

KEY CODE: DRAWN

FIND PART NUMBER OR

NO. IDENTIFYING NUMBER

1 LSF0017-71102-1

2 LSF0017-71102-2

3 LSF0017-71102-3

4 7050T7451

5 7075T73THK.190

DETAILS,SENSOR INSTL-FWD,MACH

SIGNATURES SECTIONPLLSF0017-71102

E

INSTALLATION, AVR-2B(V) 1 LASER DETECTING SET (LDS) ENGR

KEY CODE: DRAWN

1 TOP LEVEL UH60 ALL A 09/08/28 BP JR PT

3 TOP LEVEL HH60 ALL B 10/02/28 BP JR PT

ALL C 10/03/10 BP JR PT

ALL D 16/06/10 JH MH TP

D

PLLSF0017-00000

INC ECO W000049

INV ECO W000215

INV ECO W000433

NOTES:

APPLICABLE STANDARDS/SPECIFICATIONS:1.

ASME Y14.5M-1994, DIMENSION AND TOLERANCES

MIL-STD-12, ABBREVIATIONS.

2. BREAK ALL SHARP EDGES AND REMOVE ALL BURRS.

CLEAN AND COAT PER MIL-DTL-81706, CLASS 3 (ALODINE), OR

EQUIVALENT WHERE REQUIRED.

PRIME ALL SURFACES PER MIL-PRF-23377, TYPE I, CLASS C.

ITEM IDENTIFICATION: RUBBER STAMP OR STENCIL MARKINGS IN

ACCORDANCE WITH MIL-STD-130 USING A HIGH CONTRAST COLOR IN

.13 .02 HIGH CHARACTERS IN THE APPROXIMATE LOCATION SHOWN.

6. THE CONFIGURATION OF THIS PART, ASSEMBLY, INSTALLATION OR

DIAGRAM IS CONTROLLED BY THE DESIGN ACTIVITY. REQUESTS OR

SUGGESTIONS FOR CHANGES SHALL BE FORWARDED USING AN

ENGINEERING CHANGE PROPOSAL, DD FORM 1693, AUG 96 (EG) TO

COMMANDER, AVIATION APPLIED TECHNOLOGY DIRECTORATE,

ATTN: AMSRD-AMR-AA-SB, FORT EUSTIS, VA 23604-5577

TELEPHONE 757-878-3621.

3.

4.

5.

2.31

NS 5.

3.00

8PL

.098 PILOT HOLES

1.63 THUR

45.0

8 PL

REVISED NOTES, CAGE WAS 81996 3-29-07

B MATERIAL WAS 707-6, ECR# 7324-001

DATE APPROVEDREZONE DESCRIPTION

REVISIONS

10/18/042 REMO BJ

A

11/19/07

040420 B1CAGE

C

B

SCALE: 2:1

APPROVAL

SIGNEDPART

NO

8 7 6 5 4 3 2 1

BY THE DESIGN ACTIVITY.

EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, (TITLE 50 U.S.C., APP. 2 01

IDENTIFYING NO.

040420

NOMENCLATURE

DOUBLER

PROJECT NO.

CAGE CODE

MATERIAL

.010

REV

QTY RED'Q

NO

DO NOT SCALE DRAWING

03 .X = 2

5230.25.

TITLE

SHEET 1 OF 1

SIZE CAGE CODE DWG

PENALTIES. DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE

UH-60-BFT

DESIGNER

DRAWN

CHECKED

STRESS

CUSTOMER

CONTRACT NUMBER

1 ITEM

.XXX

ET.SEQ) VIOLATIONS OF THESE LAWS ARE SUBJECT TO SEVERE CRIMINAL

FORT EUSTIS, VA 23604-5577

APPROVAL

V

VE PAINT NOTE

DOUBLER

US ARMY RESEARCH, DEVELOPMENT AND ENGINEERING COMMAND.

4.

DATE

06/28/04

06/28/04

AVIATION APPLIED TECHNOLOGY DIRECTORATE,

NO.

NEXT FINAL NEXT ASSY

APPLICATION

USED ON

UH-60 BFT040409

TREATMENT

FINISH

3.1-001

DASH

PER ASSY

QTY REQ'D

OR DESCRIPTION

PART OR

SPECIFICATION

-001 AL ALY, 7075-T73 PER QQ-A-250/12

UNLESS OTHERWISE SPECIFIED

DIMENSIONS IN INCHES

TOLERANCES ARE

DECIMAL ANGULAR

.XX

WARNING: THIS DOCUMENT CONTAINS DATA WHOSE EXPORT IS RESTRICTED BY

THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET.SEQ.) OR THE

THIS DRAWING HAS BEEN GENERATED AND IS

MAINTAINED BY A CAD SYSTEM. CHANGES

SHALL ONLY BE INCORPORATED AS DIRECTED

DWG NO.

SH REV

.06

.05

TYP

TYPICAL LETTERING LAYOUT

XXXX

(YY/MM/DD)

APPROVED

SEE DOCUMENT MANAGEMENT SYSTEM FOR APPROVAL STATUS

REV DESCRIPTION

REVISION HISTORY

− 07/10/22 (ON FILE)

B ECO−6877, REV PER ECO PU

08/06/18 ON FILE

ON FILE

INITIAL RELEASE, ECO−4424

ECO−6094, REV PER ECO PU

08/12/03

1:1 1 OF 2

SIZE

DRAWN

CONTRACT NO

CHECKED

ENGINEER

PRCS ENGR

SHEETSCALE WEIGHT

Simmonds Precision Products, Inc.

Vergennes, Vermont 05491

89305

CORPORATION

UNLESS OTHERWISE SPECIFIED:

XX PLACE XXX PLACE ANGLES

.01 .005 1

MACHINED SURFACES

TOLERANCES ARE

APPROVALS ON FILE

P. GRAS

C. WILSON

B. HEMINGWAY

DECAL

300833−7523

07/10/22

(ON FILE)

(ON FILE)

CREATED USING: CATIA V5

P/N: 300833−7523 SMARTEAM REVISION: 1.01

DIMENSIONS ARE IN INCHES

DIMENSIONS AND TOLERANCES

TO BE INTERPRETED PER

ASME Y14.5M 1994

1. INTERPRET DRAWING PER ASME Y14.100.

2. REMOVE BURRS AND BREAK ALL SHARP EDGES.

3. PLATE IS MADE FROM .032 THK PHOTOSENSITIVE ANODIZED

ALUMINUM PER GG−P−455

4. PLATE SHALL BE PER MIL−P−15024, TYPE 1, STYLE III

(NATURAL CHARACTERS ON BLACK BACKGROUND), APPLIED

ADHESIVE BACKING.

5. CHARACTERS SHALL BE WELL BALANCED AND SYMMETRICAL.

6. MAIN TEXT IS .24 HIGH AND SECONDARY TEXT IS .13 HIGH.

7. MAIN TEXT IS .18 HIGH AND SECONDARY TEXT IS .13 HIGH.

8. ALTERNATE MATERIAL: .002 THICK POLYESTER, MATTTE

SILVER METALIZED WITH PERMANENT ADHESIVE.

PART NUMBER: PP15100, CAGE CODE 04TZ7.

THESE COMMODITIES, TECHNOLOGY, OR SOFTWARE ARE SUBJECT TO THE EXPORT CONTROLS IN

ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S

LAW IS PROHIBITED.

COPYRIGHT C 2007

SIMMONDS PRECISION PRODUCTS, INC.

ALL RIGHTS RESERVED

PROPRIETARY INFORMATION

USE, DUPLICATION, OR DISCLOSURE IS SUBJECT TO THE RESTRICTIONS AS STATED IN

AGREEMENT DAAH10−02−9−0002 BETWEEN THE GOVERNMENT AND GOODRICH CORPORATION.

GOVERNMENT PURPOSE RIGHTS

NEXT ASSY

APPLICATION

300833−1401−0201 UH−60A/L

USED ON

The information contained herein is proprietary and confidential to Simmonds Precision Products Inc., a wholly owned subsidiary of

Goodrich Corporation and may not be used or disclosed without the prior, specific written consent by an authorized representative of

Goodrich Corporation, or Simmonds Precision Products, Inc. The unauthorized use or disclosure thereof is prohibited and may be subject to criminal and/or civil liability.

STANDARD OUTLINE FOR

ALL DECALS

12.65

11.250

3 PL

.697

1.500

1.500

5.10

.75

.375R

6 PL

.50R

4 PL

.06

6 PL

.50

2 PL

3.99

1.48

4.73

6.41

5.53

4.31 .75

NO. 1 AC PRI BUS

NO. 2 AC PRI BUS

26 VAC BUS

NO. 2 DC PRI BUS

NO. 1 DC PRI BUS

DC ESSN

CEU

FWD

DSP

AFT

DSP VCR GPS PLS

FLIR

5 EQ

PL

DESIGNATOR LOCATIONS 6

−0101

APPROVED

SEE DOCUMENT MANAGEMENT SYSTEM FOR APPROVAL STATUS

REV DESCRIPTION

REVISION HISTORY

− 07/10/22 (ON FILE)

A 08/06/18 ON FILE

INITIAL RELEASE, ECO−4424

ECO−6094, REV PER ECO PU

1:1 2 OF 2

SHEETSCALE WEIGHT

89305

300833−7523

CREATED USING: CATIA V5

P/N: 300833−7523 SMARTEAM REVISION: 1.01

B ECO−6877, REV PER ECO PU 08/12/03 ON FILE

1.58 ±.10

7.78 ±.10

3.83 ±.10

1.45 .75

9.86 ±.10

NO. 2 AC PRI NO. 2 DC PRI

NO. 1 DC PRI

AAR−57

ECU

NO. 1 AC PRI

AUX

HTR

PWRPLS CONT

FUEL

ECU CONT SEQ SEQ WOW

NO.2NO.1

HOIST LT

NO. 2 DC PRI

CVFDR MPU/RDC CDU

HUMS

AAR−57 SQUIB

VCR GPS CEU

DSP L−BAND PLGR COMP ROUTER EDM

TYPICAL LETTER SPACING

DESIGNATOR LOCATIONS 7

−0102

DSP L−BAND PLGR COMP ROUTER EDM

−0103

HUB

EDM

ASC 15

DSP L−BAND

DAGR

GPS COMP ROUTER EDM

−0104

HUB

EDM

ASC 15

DC ESNTL

AWIS

DATA IS SUBJECT TO THE RESTRICTIONS ON THE TITLE PAGE.

PLLSF0017-71201

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, FOR ADMINISTRATIVE OR OPERATIONAL USE, AS OF 9 JULY 2004. OTHER REQUESTS SHALL BE REFERRED TO: UTILITY HELICOPTERS PROJECT MANAGEMENT OFFICE, PROGRAM EXECUTIVE

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C., APP 2401, ET SEQ.) VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALITIES. DISSEMINATE IN ACCORDANCE WITH PROVISION OF DoD DIRECTIVE 5230 25.

DATE: 16/06/10 REV:C

PLLSF0017-71301

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, FOR ADMINISTRATIVE OR OPERATIONAL USE, AS OF 9 JULY 2004. OTHER REQUESTS SHALL BE REFERRED TO: UTILITY HELICOPTERS PROJECT MANAGEMENT OFFICE, PROGRAM EXECUTIVE

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C., APP 2401, ET SEQ.) VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALITIES. DISSEMINATE IN ACCORDANCE WITH PROVISION OF DoD DIRECTIVE 5230.25.

DATE: 16/06/10 REV: G

DOC NO:

CONTRACT: STRESS 09/10/05

TITLE: PROJECT 09/10/05

CAGE CODE: SUPERVISOR 09/10/05

KEY CODE: CHECK 09/10/05

REV STATUS ENGINEER 09/10/05

PROJ NAME: DRAWN 09/10/05

-1 LSF0017-00910 HH-60 1 1 ALL A 10/03/10 BP JR PT

ALL B 10/05/25 BP JR PT

ALL C 16/06/10 JH MH TP

INC ECO W000436

INC ECO W000524

PLLSF0017-71400

COMPARATOR INSTL, HH60-AVR-2B

HH-60 AVR-2B

DOC NBR: PLLSF0017-71400

COMPARATOR INSTL, HH60-AVR-2B

KEY CODE:

DOC NO: PLLSF0017-71400

FIND PART NUMBER OR

NO. IDENTIFYING NUMBER

1 LSF0017-71400-1

2 LSF0017-71301-19

3 DELETED

4 L31-39000-001

5 NAS623-3-3

6 NAS6603-2

7 NAS1149F0332P

8 NAS1832-3-4

9 ATR500A/B

10 DELETED

11 DELETED

12 DELETED

13 MS15795-749

14 LSF0017-00111-17

15 LSF0017-00111-19

SEE SEPARATE PARTS LIST FOR PARTS,APPLICATION AND PARTS STATUS PL LSF0017-71201

7.02

2X 3.51.27 2X .430

2X 3.800

2X 7.170

7.600

3X 3.240 3X 3.240

8X .201

4X R.80

(.125)

8.14

-13 BLANKING PLATE 4.

8 7 6 5 4 3 2 1

8 7 6 5 4 3 1

DATE APPROVEDREVEFF DESCRIPTION

REVISIONSPARTS STATUS

DWG

SH

DWG TITLE

SCALE -

C E DWG

ALL SHEETS ARE THE SAME REVISION STATUS

CONTRACT NUMBER

REV

OFSHEET 1 4

UNLESS OTHERWISE SPECIFIED

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET.SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, (TITLE 50 U.S.C., APP. 2401 ET.SEQ.) VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND US DOD CONTRACTORS ONLY, FOR ADMINISTRATIVE OR OPERATIONAL USE, AS OF 9 JULY 2004. OTHER REQUESTS SHALL BE REFERRED TO: UTILITY HELICOPTERS PROJECT OFFICE, PROGRAM EXECUTIVE OFFICE, AVIATION, ATTN: SFAE-AV-UH (DATA MANAGER, REDSTONE ARSENAL, AL 35898-5000.

AFT,SHT MTL

DETAILS, SENSOR INSTL-

APVD 08/12/08

ENGR 08/12/08

ENGR 08/12/08

CHECK 08/12/08

DRAWN 08/12/08

STRESS 08/12/08

ADVMFG

DFTG CHK

FLT SCI

LSF0017-71201 B

LSF0017-71201

1/1

1. CHROMATE CONVERSION COAT PER MIL-DTL-5541 CL 3.

2. NO PR MER OR PAINT ON THIS SURFACE.

3. TOLERANCES BETWEEN EQUALLY SPACED FEATURES ARE `.03, NON-CUMULATIVE.

4. FINISH PER THE FOLLOW NG:

CONVERSION COAT: MIL-5541 CL 1A

PR ME: MIL-PRF-23377 TY 1

TOP COAT: MI-DTL-53039 TY IX, COLOR CODE 34031 PER FED-STD-595.

5. FABRICATE PART FROM CAD FILE. MODEL GEOMETRY IS BASIC.

D RECTLY DIMENSIONED FEATURES TAKE PRECEDENCE OVER

3D MODEL. UNLESS OTHERWISE SPECIFIED, PART PROFILE AND

FEATURE TOLORENCES SHALL BE 0.080" FROM SOLID MODEL F LE.

CAD FILE: LSF0017-71201-5_20151208 STP

6. FINISH PER THE FOLLOW NG:

CONVERSION COAT: MIL-5541 CL 3

PR ME: MIL-PRF-23377 TY I

TOP COAT: MI-DTL-53039 TY IX, COLOR CODE 34031 PER FED-STD-595.

ALL A 09/09/03 BP JR PT

1. INTERPRET DOCUMENT PER ASME Y14.100

2. DIMENSIONING & TOLERANCING PER ASME Y14.5-2009

DOES NOT INCLUDE APPLIED FINISHES

3. DO NOT SCALE DRAWING

4. PARENTHETICAL IDENTITIES ARE FOR REFERENCE ONLY

5. IDENTIFY PER MIL-STD-130

6. SURFACE TEXTURE PER ANSI/ASME B46.1-2002

7. SURFACE ROUGHNESS = 125 Ra (Roughness Average)

8. ALL DIMENSIONS IN INCHES UNLESS OTHERWISE SPECIFIED

.X = ` .1 ANGULAR = ` 0 30'

.XX = ` .03 LOFTED DETAIL = ` .03

.XXX = ` .010 FRACTIONS = ` 1/16 (.0625)

B INCORPORATES ECN-0001 ECO

INC INTENT OF ECO W000070 M NOR

CHANGES TO SHEET 2 FOR CLARITY

16/06/10 MH JH TP

8X .50

3X 3.238 3X 3.237

31X .098

7 EQUAL

SPACES

4X R.50

4 EQUAL

9X .50

1.69

2X .425

2X 3.800

2X 7.175

7.10

2X 7.600 5.98

4X R.25

.25

8X .49

7 EQUAL

2X 3.55

5 EQUAL

10X .50

2X 2.99

10.10

1.40

9.36

11.01

1.00 CONSTANT

2.47

.201 THRU

2X 12

COUNTERSINK FAR SIDE

(.063)

-1 MOUNT ASSY (SHOWN)

-2 MOUNT ASSY (OPPOSITE)

6.

FAR SIDE

8 7 6 5 4 3 2 1

LSF0017-71201DWG. NO. SH 28 7 6 5 4 3 1

PLLSF0017-29031

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DoD CONTRACTORS ONLY, FOR ADMINISTRATIVE

OR OPERATIONAL USE, AS OF 9 JULY 2004. OTHER REQUESTS SHALL BE REFERED TO:

UTILITY HELICOPTERS PROJECT MANAGEMENT OFFICE

PROGRAM EXECUTIVE OFFICE, AVIATION

ATTN: SFAE-AV-UH (DATA MANAGER)

REDSTONE ARSENAL, AL 35898-5000

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C., APP 2401, ET SEQ.) VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALITIES. DISSEMINATE IN ACCORDANCE WITH PROVISION OF DoD DIRECTIVE 5230.25.

DATE: 16/06/10 REV: H

ENGINEER: C. CLIFTON

PLLSF0017-29032

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DoD CONTRACTORS ONLY, FOR ADMINISTRATIVE

OR OPERATIONAL USE, AS OF 9 JULY 2004. OTHER REQUESTS SHALL BE REFERED TO:

UTILITY HELICOPTERS PROJECT MANAGEMENT OFFICE

PROGRAM EXECUTIVE OFFICE, AVIATION

ATTN: SFAE-AV-UH (DATA MANAGER)

REDSTONE ARSENAL, AL 35898-5000

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C., APP 2401, ET SEQ.) VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALITIES. DISSEMINATE IN ACCORDANCE WITH PROVISION OF DoD DIRECTIVE 5230.25.

DATE: 16/06/10 REV: C

ENGINEER: C. CLIFTON

DOC NBR: PLLSF0017-29032, REVISION: C

-001 PARTS LIST

QTY FIND CAGE PART NUMBER OR NOMENCLATURE

REQD NO. CODE IDENTIFYING NUMBER OR DESCRIPTION UM SPEC OR STD NOTE

1 LSF0017-29032-001 HARNESS INSTALLATION EA

1 2 LSF0017-29050-012 CABLE ASSEMBLY EA

1 3 LSF0017-29050-013 CABLE ASSEMBLY EA

1 4 LSF0017-29050-004 CABLE ASSEMBLY EA

1 5 LSF0017-29050-005 CABLE ASSEMBLY EA

1 6 LSF0017-29050-007 CABLE ASSEMBLY EA

1 7 LSF0017-29050-010 CABLE ASSEMBLY EA

1 8 LSF0017-29050-011 CABLE ASSEMBLY EA

4 9 56501 TC92 MOUNTING PLATE EA

1 10 81349 M22529/2-2C-85 GROMMET EA

1 11 80205 MS27039-1-40 SCREW, MACHINE EA

6 12 80205 MS27039-1-36 SCREW, MACHINE EA

75 13 96906 MS21044N3 NUT, SELF LOCKING-HEXAGON, REG HEIGHT EA

124 14 80205 NAS1149D0332J WASHER, FLAT EA NAS1149

5 15 80205 NAS43DD3-32N SPACER EA

18 16 80205 NAS43DD3-48N SPACER EA

4 17 80205 NAS43DD3-20N SPACER EA

8 18 80205 NAS43DD3-60N SPACER EA

1 19 80205 NAS43DD3-40N SPACER EA

5 20 80205 NAS43DD3-24N SPACER EA

2 21 80205 NAS1801-3-11 SCREW EA

2 22 80205 NAS1149C0332R WASHER, FLAT EA NAS1149

1 23 80205 MS27039-1-26 SCREW, MACHINE EA

8 24 81343 AN743-12 BRACKET EA

1 25 LSF0017-00111-9 DECAL EA

1 26 80205 MS27039-1-44 SCREW, MACHINE EA

2 27 81343 AS21919WDG05 CLAMP, LOOP EA SAEAS21919

44 28 81343 AS21919WDG13 CLAMP, LOOP EA SAEAS21919

11 29 81343 AS21919WDG15 CLAMP, LOOP EA SAEAS21919

7 30 81343 AS21919WDG17 CLAMP, LOOP EA SAEAS21919

2 31 81343 AS21919WDG27 CLAMP, LOOP EA SAEAS21919

1 32 81343 AS21919WDG19 CLAMP, LOOP EA SAEAS21919

2 33 81343 AS21919WDG22 CLAMP, LOOP EA SAEAS21919

1 34 81343 AS21919WDG23 CLAMP, LOOP EA SAEAS21919

4 35 81343 AS21919WDG08 CLAMP, LOOP EA SAEAS21919

1 36 81343 AS21919WDG16 CLAMP, LOOP EA SAEAS21919

2 37 80205 MS27039-1-28 SCREW, MACHINE EA

1 38 80205 MS27039-1-20 SCREW, MACHINE EA

7 39 80205 MS27039-1-22 SCREW, MACHINE EA

2 40 80205 MS27039-1-25 SCREW, MACHINE EA

13 41 80205 MS27039-1-10 SCREW, MACHINE EA

5 42 80205 MS27039-1-16 SCREW, MACHINE EA

13 43 80205 MS27039-1-32 SCREW, MACHINE EA