QAs_FMTV_Protection_Kits_RFP_-_as_of_16_Jan._18.pdf

QUESTION ANSWER

Reference: Section B.5.4 and Attachment 0018 –Pricing

Spreadsheet.

Statement: In Attachment 0018, the National Stock Number (NSN) in the worksheet header for tabs “58 Gal B-Kit in SPI” and “78 Gal B-

Kit in SPI” are both labeled 2540-01-552-7805.

Question: Should the NSN for the “78 Gal B-Kit in SPI” tab of

Attachment 0018 be labeled 2540-01-576-3447 as referenced in

B.5.4?

The NSN for the "78 Gal B-Kit in SPI" tab of Attachment 0018 should be labeled 2540-01-576-3447 as referenced in B.5.4. Corrections will be provided in a forthcoming amendment to the RFP. Please monitor FBO for updates.

Reference: TDP

Statement: In pursuing cost quotations it was found that the

12563077 model and CREO drawing were corrupted and unable to be opened.

Question: Will new models/drawings be made available?

Everyone who received the TDP will receive an updated 12563077 model and CREO drawing via the SAFE website. If you did not receive your copy, please contact the FMTV Protection Kit Mailbox.

Reference: Attachment 0018

Statement: In the “PPK” tab of Attachment 0018, cell B25 is labeled

UIK.

Question: Please verify this is a typo and that cell B25 should be labeled UAK instead of UIK?

Attachment 0018 "PPK Tab" - Cell B25 should be labeled UAK instead of UIK.

Corrections will be provided in a forthcoming amendment to the RFP. Please monitor FBO for updates.

Q&A FMTV PROTECTION KITS RFP - W56HZV-17-R-0106 - #28 to #33

Reference: Attachment 0018

Statement: In the “Únderbody Counterweight Kit” tab of

Attachment 0018, all cells referencing containers say, “ISO

Container”. According to Section B of the solicitation, these should read “TRICON ISO Container”.

Question: Can the Government confirm that the containers referenced in the “Underbody Counterweight Kit” tab of

Attachment 0018 are to be “TRICON ISO Containers”?

Yes, the Underbody Counterweight Kits should be packaged in TRICON II ISO

Containers. Corrections will be provided in a forthcoming amendment to the RFP. Please monitor FBO for updates.

W56HZV-17-R-0106 which it is asking for the material to be packed and then placed into a 20ft ISO TRICON container NSN – 8150-01-

491-2687 or 8150-01-513-6282 type II which has doors on ends.

Can you advise which one is the correct one to use?

Underbody Counterweight Kit: TRICON II

IAW B.5.6 - TRICON ISO Container with Qty. 4 Each Underbody

Counterweight Kit P/N 57K6428

IAW C.1.1.f. P/N 57K6435: FMTV Underbody Counterweight Kit (steel plates and required hardware), required for installation on M1078 Cargo variant only, packed four (4) each Underbody Armor Kits, in TRICON ISO container IAW MIL-PRF-32349, Type 2.

Underbody Armor Kit: ISO Container Type 2

IAW B.5.5 - ISO Container with Qty. 4 Each Underbody Armor Kit NSN 2540-

01-659-2573

IAW C.1.1.e. P/N 57K6434: FMTV Underbody Armor Kit (armor panels, blast seats, reinforced cab doors, and required hardware with Cab Lift

Cylinders and Mounting Kit, P/N 57K6430), packed four (4) each Underbody

Armor Kits, in ISO container IAW CID A-A-59272, Type

II.

I request the Arc welding standards as outlined in Mil-STD-3040 as to ensure my offer is technically compliant. In the FMTV document

(E.1.32.2) it calls out Attachment 0021: MIL-STD-3040 - Arc

Welding of Armor Grade Steel as a document to be used for qualifying and repairing welds.This is what is said inside the solicitation on how to get this document:

Attachment 0021, MIL-STD-3040 Arc Welding of Armor Grade Steel

(initial release 2016) is a distribution C document, making it available only to Government agencies and their Contractors. In order for a Contractor or Subcontractor to obtain this document, they must obtain a copy through their Contracting Officer or

Contracting Officers Representative (COR). The PCO or COR will confirm that the Contractor is working for the Government.

Attachment for MIL- STD-3040 will be provided in a forthcoming amendment to the RFP. Please monitor FBO for updates.