Attachment_0019_-_Drawing_12420325H.PDF

H

G

F

E

D

C

B

A

H

G

F

D

E

C

A

DRAWING SIZE E

FORMAT: E_FMTV_ENG_1_5

B

345678 1

2345678 1

CONTRACT NUMBER

DAAE07-92-C-R001

CONTRACTOR

STEWART&STEVENSON SERVICES, SEALY TEXAS U.S.A.

DRAWN BY DATE (YR-MO-DA)

G.SCHMIDT 93-02-11

CHECKER ENGINEER

B.MARGOLIS D.CHRISTIANSON

ENGINEER QUALITY ENGINEER

P.FIESTER

DRAWING APPROVAL

W.GRAY

DESIGN APPROVAL

P.MOTZENBECKER

FMTVA1P2

FMTV/A1/A1R

NEXT ASSY USED ON

APPLICATION

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

PART NO. 12420325

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2004

B. ASME Y14.5-2009

2. GENERAL:

A. THIS DRAWING ESTABLISHES THE MINIMUM PAINTING

REQUIREMENTS FOR CHEMICAL AGENT RESISTANT

COATINGS (CARC) AND COMMERCIAL COATINGS FOR

VEHICLES.

B. UNLESS OTHERWISE SPECIFIED, THE FINISHING

PROCESSES AND MATERIALS SHALL BE SELECTED BY THE

CONTRACTOR AS SPECIFIED ON THIS DRAWING AND WILL

BE SELECTED FROM THE APPLICABLE STATED METHOD(S).

THE CONTRACTOR IS RESPONSIBLE TO ASSURE THAT THE

SELECTED MATERIALS USED IN THE COATING SYSTEM

ARE COMPATIBLE.

C: CARC PAINT FINISHES:

BASIC PAINT FINISHES SHALL MEET THE REQUIREMENTS

OF MIL-DTL-53072 FOR STEEL, ALUMINUM, AND NON-FERROUS

METALS.

D. SURFACES NOT TO BE REPAINTED:

UNLESS OTHERWISE SPECIFIED, PAINTING MAY NOT BE REQUIRED

ON CERTAIN TYPES OF SURFACES SUCH AS FABRICS, PLASTICS,

RUBBER, GLASS, AND METAL PARTS NOT REQUIRING CORROSION

PROTECTION, WHERE PAINT INTERFERES WITH FUNCTION, AND

SURFACES SPECIFICALLY INTENDED FOR ELECTRICAL CONTACT, HEAT

TRANSMISSION, OR TIGHT TOLERANCE. SURFACES NOT PAINTED SHALL

BE TREATED TO PROVIDE A NON-REFLECTIVE SURFACE, UNLESS THE

SURFACE IS NOT VISIBLE WHEN VIEWING THE VEHICLE'S EXTERIOR IN

A NORMAL OPERATING CONDITION.

E. THE USE OF SILICONE BASE PRODUCTS FOR LUBRICATION OR

SURFACE COATING IS PROHIBITED WITHOUT PRIOR APPROVAL IN

WRITING FROM THE VEHICLE MANUFACTURER AND CONTRACTING OFFICER.

F. UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONAL LIMITS APPLY

BEFORE PLATING OR FINISHING OPERATIONS.

3. APPLICATION:

A. PREPARATION OF A SURFACE:

UNLESS OTHERWISE SPECIFIED, PRIOR TO ANY TREATMENT

OR PAINTING, ALL SURFACES SHALL BE FREE OF ALL SOIL

IMPURITIES , CORROSION, GREASE, OIL, SOLDER FLUX,

WELDING FLUX, WELD SPATTER, SAND, RUST, SCALE, OR

OTHER FOREIGN MATTER THAT INTERFERES WITH THE

COATING SYSTEM. CLEANING SHALL BE DONE IMMEDIATELY

BEFORE ANY TREATMENT OR PAINTING. PRECAUTIONS SHALL BE

TAKEN TO ENSURE THAT SURFACES REMAIN CLEAN AND DRY

UNTIL THEY ARE TREATED OR PAINTED. THE USE OF UNIHIBITED

ALKALINE MATERIAL, SUCH AS SODIUM HYDROXIDE SOLUTION, OR

ABRASIVES , SUCH AS IRON OXIDE ROUGE, OR STEEL WOOL, THAT

ACCELERATE CORROSION OF ALUMINUM ALLOY SURFACES IS

PROHIBITED.

B. COATING APPLICATION:

PRETREATMENT, PRIMER, AND TOP COAT SHALL BE APPLIED

IAW MANUFACTURER'S INSTRUCTIONS FOR MIXING, APPLICATION,

AND CURING TO MAXIMIZE COATING QUALITY.

C. TIME OF APPLICATION:

PRIMER SHALL BE APPLIED PROMPTLY AFTER PRETREATMENT AND

CLEANING, NOT TO EXCEED 24 HOURS AFTER THE SURFACE HAS BEEN

PREPARED FOR PAINTING, EXCLUDING ALUMINUM AND ALUMINUM

ALLOYS TREATED IAW HEXAVALENT CHROMIUM FREE MIL-DTL-5541. TOPCOAT

SHALL BE APPLIED TO PRIMER IAW PRIMER SPECIFICATION REQUIREMENTS.

4. HEALTH, SAFETY, AND ENVIRONMENTAL REGULATIONS:

A. PAINT QUALIFICATION:

THE SUPPLIER IS RESPONSIBLE FOR MEETING ALL

APPLICABLE ENVIRONMENTAL REGULATIONS FOR THE

STATED PROCESS. WHEN IT IS NECESSARY TO MODIFY

THE CERTIFIED PAINT, SUBJECT PAINT WILL BE RE-

QUALIFIED. THE ACTIVITY RESPONSIBLE FOR THE CARC

QUALIFIED PRODUCT LIST IS THE U.S. ARMY RESEARCH

LABORATORY 4600 DEER CREEK LOOP AMSRD-ARL-WMMC

ABERDEEN PROVING GROUNDS, MD 21005.

B. HIGH TEMPERATURE PAINT:

SURFACES ATTAINING AN OPERATING TEMPERATURE

OF 400 F OR GREATER MUST BE PAINTED WITH HEAT

RESISTANT PAINT IAW COATING REQUIREMENT METHOD 6.

5. APPLICABLE COATING COLOR CHIP NUMBERS REFERENCED

FOR THE STATED COATING METHODS ON THIS REQUIREMENT

SHALL BE IAW FED-STD-595.

6. ONE(1) mil = 1/1000 INCH (1.0 mil = 0.001 INCH)

NOTES:

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

DO NOT SCALE DRAWING

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES ON ANGLES

2 PLACE DECIMALS

3 PLACE DECIMALS

THIRD ANGLE PROJECTION

MATL ENGR MODELED BY

T.BRUSTER F.LEMANSKI 1 OF 1

SHEETUNIT WT.SCALE

1242032519207E

DWG NOCAGE CODESIZE

TREATMENT AND FINISH

REQUIREMENTS FMTV

US ARMY

TANK AUTOMOTIVE & ARMAMENTS COMMAND

WARREN, MICHIGAN 48397-5000

DESIGN ACTIVITY

REVISIONS

APPROVEDDATE(YR-MO-DA)DESCRIPTIONZONEREVISION

M.CHURCH

FML SEW2004-02-04

REDRAWN WITH CHANGES TO PRO/E

1) REVISED NOTE 1

2) REVISED NOTE 2

3) REVISED METHOD 1

4) REVISED METHOD 2

5) REVISED METHOD 3

6) REVISED METHOD 4

7) REVISED METHOD 5

8) REVISED METHOD 6

9) REVISED METHOD 7

10) REVISED METHOD 9

11) REVISED METHOD 10

12) REVISED METHOD 11

13) REVISED METHOD 12

14) REVISED METHOD 13

15) REVISED METHOD 14

16) REVISED METHOD 15

17) REVISED METHOD 2,

MIL-C-5541 WAS SAE-AWS-C-5541,

MIL-A-8625 WAS SAE-AWS-A-8625.

18) REVISED METHOD 3,

MIL-A-8625 WAS SAE-AWS-A-8625,

19) REVISED METHOD 7 ADDED FINISH NOTE

20) REVISED METHOD 10,

MIL-C-5541 WAS SAE-AWS-C-5541,

MIL-A-8625 WAS SAE-AWS-A-8625.

MIL-PRF-23377 WAS MIL-P-23377

21) REVISED METHOD 11,

MIL-C-5541 WAS SAE-AWS-C-5541,

MIL-A-8625 WAS SAE-AWS-A-8625.

MIL-PRF-23377 WAS MIL-P-23377.

22) REVISED METHOD 14,

MIL-C-5541 WAS SAE-AWS-C-5541,

MIL-A-8625 WAS SAE-AWS-A-8625.

MIL-PRF-23377 WAS MIL-P-23377.

23) REVISED METHOD 15,

MIL-C-5541 WAS SAE-AWS-C-5541,

MIL-A-8625 WAS SAE-AWS-A-8625.

MIL-PRF-23377 WAS MIL-P-23377

24) ADDED NOTE 2F

ERR SSS-U7474

H8 G8 H6 G6 F6 F6 E6 D6 C6 H3 G3 F3 F3 E3 E3 D3 G5

F5

C5 G3

F3

D3

C3

D

D.TRUDO

DST MC2006-05-01

1. REVISED NOTES, METHOD 9, ADDED OPTIONAL

MATERIALS.

2. REMOVED REFERENCES TO MIL-C-46168 AND

UPDATED MIL-C-53039 TO MIL-DTL-53039 IN

METHODS 1, 2, 4, 5, 10, 12, 13, 15

ERR SSS-V1383

H4

H6

E

N.TAUBE2011-04-08

1) UPDATED NOTE 1

2) CHANGED MIL-C-5541 TO HEXAVALENT CHROMIUM FREE

MIL-DTL-5541

3) CHANGED DOD-P-15328 TO HEXAVALENT CHROMIUM

FREE DOD-P-15328

4) REMOVED GM9984017 FROM METHODS 1,2,3,5

5) CHANGED MIL-P-53084 TO MIL-DTL-53084

6) CHANGED MIL-P-53022 AND MIL-P-53030 TO MIL-DTL-53022

AND MIL-DTL-53030

7) CHANGED METHOD 3 FROM MIL-P-53084 TO HEXAVALENT

CHROMIUM FREE MIL-DTL-5541

8) UPDATED USED ON

9) UPDATED METHOD 10 TO REMOVE INTERIOR / EXTERIOR

SURFACES

10) REMOVED SCALE AND UNIT WEIGHT

TAC-V9457

H8 E8

H5

D5 E5 C3

F5

A3 G4

A1

F

J.WENNER2012-05-14

UPDATED SHEET FORMAT TO THE LATEST STANDARD FORMAT

1) METHOD 4, OMITTED SPECIFIC PRIMER COLOR #27875

2) METHOD 10, OMITTED SPECIFIC PRIMER COLOR #27875

3) METHOD 11, OMITTED SPECIFIC PRIMER COLOR #27875,

ADDED MIL-PRF-32348 TO PRIMER CALLOUT

4) METHOD 4: ADDED MIL-PRF-32348 TO PRIMER CALLOUT

5) METHOD 5: REVISED PRIMER SPECIFICATIONS

6) METHOD 10: ADDED "(INTERIOR ONLY)" TO MIL-PRF-23377,

ADDED MIL-PRF-32348 TO PRIMER CALLOUT

7) NOTE 3B: COATING APPLICATION WAS PAINT APPLICATION

8) NOTE 4A: SUPPLIER WAS CONTRACTOR, REVISED ADDRESS

9) METHOD 7: CORROSION WAS COROSIVE, ENSURE WAS INSURE

10) METHOD 13: "TOPCOAT FOR" WAS "TOPCOAT ONLY FOR"

OSKV8189

E5 G3 F3

G6 F6 G3

E8 D8 G6 E4

G

J. WENNER2012-10-24

1) METHOD 1, UPDATED DRY FILM THICKNESS

2) METHOD 2, UPDATED DRY FILM THICKNESS

3) METHOD 3, UPDATED DRY FILM THICKNESS

4) METHOD 5, UPDATED DRY FILM THICKNESS

TAC-V9546

H6 G6 F6 E6

H

METHOD 1: IRON AND STEEL SURFACES REQUIRING A POLYURETHANE

TOPCOAT WITH AN E-COAT PRIMER FOR EXTERIOR AND/OR

INTERIOR EXPOSURE.

CLEAN: IAW TT-C-490, METHOD OPTIONAL

PRETREAT: IAW TT-C-490, TYPE 1

OPTIONAL: IAW TT-C-490, TYPE III, IAW HEXAVALENT CHROMIUM FREE DOD-P-15328

DRY FILM THICKNESS IAW MIL-DTL-53072

PRIMER: IAW MIL-DTL-53084

DRY FILM THICKNESS 1.0 mil MINIMUM

DRY FILM THICKNESS IAW PRIMER MANUFACTURER'S RECOMMENDATION TO

MEET CORROSION REQUIREMENTS. MINIMUM DRY FILM THICKNESS MUST BE

MAINTAINED REGARDLESS OF PRIMER MANUFACTURER.

OPTIONAL: IAW GM9984070, GM9984094 OR A-A-52474

COLOR SEMIGLOSS GRAY OR BLACK.

TOPCOAT: IAW MIL-DTL-53039 OR MIL-DTL-64159

DRY FILM THICKNESS IAW MIL-DTL-53072

COLOR #34094 LUSTERLESS #383 GREEN

METHOD 2: ALUMINUM AND ALUMINUM ALLOY SURFACES REQUIRING A

POLYURETHANE TOPCOAT WITH AN E-COAT PRIMER FOR EXTERIOR AND/OR

INTERIOR EXPOSURE.

CLEAN AND TREAT: IAW HEXAVALENT CHROMIUM FREE MIL-DTL-5541

OPTIONAL ANODIZE: IAW MIL-A-8625

PRIMER: IAW MIL-DTL-53084

DRY FILM THICKNESS 1.0 mil MINIMUM

DRY FILM THICKNESS IAW PRIMER MANUFACTURER'S RECOMMENDATION TO

MEET CORROSION REQUIREMENTS. MINIMUM DRY FILM THICKNESS MUST BE

MAINTAINED REGARDLESS OF PRIMER MANUFACTURER.

OPTIONAL: IAW GM9984070, GM9984094 OR A-A-52474

COLOR SEMIGLOSS GRAY OR BLACK

TOPCOAT: IAW MIL-DTL-53039 OR MIL-DTL-64159

DRY FILM THICKNESS IAW MIL-DTL-53072

COLOR #34094 LUSTERLESS #383 GREEN

METHOD 3: ALUMINUM AND ALUMINUM ALLOY SURFACES WITH AN E-COAT

PRIMER NOT REQUIRING A POLYURETHANE TOPCOAT.

CLEAN AND TREAT: IAW HEXAVALENT CHROMIUM FREE MIL-DTL-5541

OPTIONAL ANODIZE: IAW MIL-A-8625

PRIMER: IAW MIL-DTL-53084

DRY FILM THICKNESS 1.0 mil MINIMUM

DRY FILM THICKNESS IAW PRIMER MANUFACTURER'S RECOMMENDATION TO

MEET CORROSION REQUIREMENTS. MINIMUM DRY FILM THICKNESS MUST BE

MAINTAINED REGARDLESS OF PRIMER MANUFACTURER.

OPTIONAL: IAW GM9984070, GM9984094 OR A-A-52474

COLOR SEMIGLOSS GRAY OR BLACK

METHOD 4: IRON AND STEEL SURFACES REQUIRING A POLYURETHANE

TOPCOAT WITH A NON E-COAT PRIMER FOR EXTERIOR AND/OR

INTERIOR EXPOSURE.

METHOD 1 MAY BE SUBSTITUTED FOR METHOD 4.

CLEAN: IAW TT-C-490, METHOD OPTIONAL.

PRETREAT: IAW TT-C-490, TYPE 1

OPTIONAL: IAW TT-C-490, TYPE 111, IAW HEXAVALENT CHROMIUM FREE DOD-P-15328

DRY FILM THICKNESS IAW MIL-DTL-53072

PRIMER: IAW MIL-DTL-53022, MIL-DTL-53030 OR MIL-PRF-32348

DRY FILM THICKNESS IAW MIL-DTL-53072

TOPCOAT: IAW MIL-DTL-53039 OR MIL-DTL-64159

DRY FILM THICKNESS IAW MIL-DTL-53072

COLOR #34094 LUSTERLESS #383 GREEN

METHOD 5: GALVANIZED STEEL SURFACES REQUIRING A POLYURETHANE

TOPCOAT FOR EXTERIOR AND INTERIOR EXPOSURE.

CLEAN: IAW TT-C-490 METHOD OPTIONAL

PRETREAT: IAW TT-C-490 TYPE I

PRIMER: IAW MIL-DTL-53022, MIL-DTL-53030, MIL-DTL-53084, OR MIL-PRF-32348

DRY FILM THICKNESS 1.0 mil MINIMUM

DRY FILM THICKNESS IAW PRIMER MANUFACTURER'S RECOMMENDATION TO

MEET CORROSION REQUIREMENTS. MINIMUM DRY FILM THICKNESS MUST BE

MAINTAINED REGARDLESS OF PRIMER MANUFACTURER.

OPTIONAL: IAW GM9984070, GM9984094 OR A-A-52474

COLOR SEMIGLOSS WHITE, GRAY OR BLACK

TOPCOAT: PAINT MIL-DTL-53039 OR MIL-DTL-64159

DRY FILM THICKNESS IAW MIL-DTL-53072

COLOR #34094 LUSTERLESS #383 GREEN

METHOD 6: IRON, STEEL AND ALUMINUM SURFACES REQUIRING

A HEAT RESISTING COATING THAT EXPERIENCE

TEMPERATURES OF 400 F OR GREATER.

TOPCOAT: IAW PAINT MIL-P-14105

DRY FILM THICKNESS 1.5 - 2.5 mil

COLOR #34094 LUSTERLESS #383 GREEN OR

#37030 LUSTERLESS BLACK

METHOD 7: SURFACES THAT DO NOT REQUIRE A POLYURETHANE

TOPCOAT BUT MUST HAVE A PROTECTIVE CORROSION

RESISTANT FINISH FOR INTERIOR AND EXTERIOR

EXPOSURE.

FINISH: THE COMPONENT SHALL BE CORROSION RESISTANT TO HIGH

HUMIDITY, SALT SPRAY, ROAD DE-ICING CHEMICALS, AND

ATMOSPHERIC CONTAMINATION. NO PERFORATION OR OTHER

DAMAGE CAUSED BY CORROSION SHALL REQUIRE REPAIR OR

REPLACEMENT OF PARTS. THE CORROSION PREVENTION

METHOD SHALL NOT REQUIRE ACTIONS (BEYOND THE NORMAL

WASHING AND REPLACEMENT OF DAMAGED FINISH) TO KEEP

THE CORROSION PREVENTION IN EFFECT. THE COLOR OF THE

FINISH IS OPTIONAL OR WITHIN THE SPECIFICATIONS OF THE

COMPONENT. THIS WILL ENSURE THE MATERIAL/FINISH TO TEN (10)

YEARS IN A MILITARY ENVIRONMENT.

APPLICATION: IAW BEST COMMERCIAL/PAINT MANUFACTURER'S METHOD

COLOR OPTIONAL: #34094 LUSTERLESS #383 GREEN OR

#37030 LUSTERLESS BLACK ARE PREFERRED

ADHESION IAW TT-C-490 NON-CARC REQUIREMENTS.

METHOD 8: THIS METHOD INTENTIONALLY LEFT BLANK.

METHOD 9: POLYURETHANE TOPCOAT SURFACES REQUIRING

A NON SLIP COATING FOR EXTERIOR AND INTERIOR

EXPOSURE.

TOPCOAT: MIL-DTL-53039 OR MIL-DTL-64159 COMBINED WITH

SHERWIN WILLIAMS PART NUMBER X90AS4377 ANTI-SKID

IN ACCORDANCE WITH VENDOR'S RECOMMENDATION.

OPTIONAL ANTI-SKID MATERIAL AUTHORIZED IF PERFORMANCE

IS THE SAME AS OR BETTER THAN CURRENT ANTI-SKID

MATERIAL WHEN TESTED IN ACCORDANCE WITH ASTM D4060

FOR 5000 CYCLES WITH CS-10 WHEEL AND 1000 GRAM LOAD.

OPTIONAL MATERIAL SHALL BE MIXED AND APPLIED IN ACCORDANCE

WITH VENDOR'S RECOMMENDATION.

DRY FILM THICKNESS IAW MIL-DTL-53072

COLOR #34094 LUSTERLESS #383 GREEN

METHOD 10: ALUMINUM AND ALUMINUM ALLOY SURFACES REQUIRING

A POLYURETHANE TOPCOAT WITH A NON E-COAT PRIMER

FOR EXTERIOR AND INTERIOR EXPOSURE.

METHOD 2 MAY BE SUBSTITUTED FOR METHOD 10 EXTERIOR SURFACES.

CLEAN AND PRETREAT: IAW HEXAVALENT CHROMIUM FREE MIL-DTL-5541, MIL-A-8625

IAW TT-C-490 TYPE 111, IAW HEXAVALENT CHROMIUM FREE

DOD-P-15328

DRY FILM THICKNESS: IAW MIL-DTL-53072

PRIMER: IAW MIL-DTL-53022, MIL-DTL-53030, MIL-PRF-23377

(INTERIOR ONLY), OR MIL-PRF-32348

DRY FILM THICKNESS IAW MIL-DTL-53072

TOPCOAT: IAW MIL-DTL-53039 OR MIL-DTL-64159

DRY FILM THICKNESS IAW MIL-DTL-53072

COLOR #34094 LUSTERLESS #383 GREEN

METHOD 11: ALUMINUM AND ALUMINUM ALLOY SURFACES

REQUIRING A POLYURETHANE TOPCOAT WITH

A NON E-COAT PRIMER FOR INTERIOR

EXPOSURE.

CLEAN AND TREAT: IAW HEXAVALENT CHROMIUM FREE MIL-DTL-5541

OPTIONAL ANODIZE: IAW MIL-A-8625

PRIMER: IAW MIL-DTL-53022, MIL-DTL-53030, MIL-PRF-23377 OR

MIL-PRF-32348 DRY FILM THICKNESS IAW MIL-DTL-53072

TOPCOAT: IAW MIL-PRF-22750, TYPE 1

DRY FILM THICKNESS IAW MIL-DTL-53072

COLOR #24533 SEMIGLOSS GREEN

METHOD 12: POLYURETHANE TOPCOAT SURFACES REQUIRING LETTER

AND NUMBER MARKINGS FOR EXTERIOR EXPOSURE.

TOPCOAT: IAW MIL-DTL-53039 OR MIL-DTL-64159

DRY FILM THICKNESS IAW MIL-DTL-53072

COLOR #37030 LUSTERLESS BLACK WHEN APPLIED ON

COLOR # 34094 LUSTERLES #383 GREEN BASE COAT

OR COLOR #30051 LUSTERLESS # 383 BROWN WHEN

APPLIED ON LUSTERLESS BLACK CAMOFLAGED AREA.

METHOD 13: COMPOSITE OR PLASTIC SURFACES REQUIRING

A POLYURETHANE TOPCOAT FOR EXTERIOR AND

INTERIOR EXPOSURE.

CLEAN: IAW TT-C-490, METHOD OPTIONAL

OR IAW MIL-PRF-62419

TOPCOAT: IAW MIL-DTL-53039 OR MIL-DTL-64159

DRY FILM THICKNESS IAW MIL-DTL-53072

COLOR # 34094 LUSTERLES #383 GREEN

METHOD 14: ALUMINUM OR ALUMINUM ALLOY SURFACES FOR

INTERIOR EXPOSURE THAT ARE TO BE ADHESIVELY

BONDED AND REQUIRE A NON E-COAT PRIMER AND AN

EPOXY TOPCOAT.

CLEAN AND PRETREAT: IAW ASTM E864 OR E866

OPTIONAL: IAW MIL-DTL-53072 AND HEXAVALENT CHROMIUM FREE

DOD-P-15328

OPTIONAL: IAW HEXAVALENT CHROMIUM FREE MIL-DTL-5541

OPTIONAL: IAW MIL-A-8625

PRIMER: IAW MIL-PRF-23377, MIL-DTL-53030 OR MIL-DTL-53022

DRY FILM THICKNESS IAW MIL-DTL-53072

TOPCOAT: IAW MIL-PRF-22750

DRY FILM THICKNESS IAW MIL-DTL-53072

COLOR # 24533 SEMIGLOSS GREEN

METHOD 15: ALUMINUM OR ALUMINUM ALLOY SURFACES FOR

EXTERIOR EXPOSURE THAT ARE TO BE ADHESIVELY

BONDED AND REQUIRE A NON E-COAT PRIMER AND

A POLYURETHANE TOPCOAT.

CLEAN AND PRETREAT: IAW ASTM E864 AND E866

OPTIONAL: IAW MIL-DTL-53072 AND HEXAVALENT CHROMIUM FREE

DOD-P-15328

OPTIONAL: IAW HEXAVALENT CHROMIUM FREE MIL-DTL-5541

OPTIONAL: IAW MIL-A-8625

PRIMER: IAW MIL-PRF-23377, MIL-DTL-53030 OR MIL-DTL-53022

DRY FILM THICKNESS IAW MIL-DTL-53072

TOPCOAT: IAW MIL-DTL-53072 USE PAINT

MIL-DTL-53039 OR MIL-DTL-64159

DRY FILM THICKNESS IAW MIL-DTL-53072

COLOR # 383 GREEN

METHODS