Attachment_0028,_General_Mechanics_Tool_Kit.pdf

453 KB Posted

Attached to
Light Engineer Utility Trailer (LEUT) Type II
Solicitation number
W56HZV-16-R-0210
Issued by

About this file

From the source

Attachment 0028, General Mechanics Tool Kit

View the file

Other files

File Type Posted
LEUT_Type_II_RFP_W56HV-16-R-0210_Questions_Set_3,_Question_30.xlsx XLSX spreadsheet
LEUT_Type_II_RFP_W56HV-16-R-0210_Questions_Set_2_(13-32_minus_30).pdf PDF
Attachment_0029,_Superseding_Revisions_to_ATPD-2414B.PDF PDF
LEUT_Type_II_RFP_W56HV-16-R-0210_Questions_Set_1,_1-12.pdf PDF
Attachment_0030,_Consolidated_GFP.pdf PDF
Attachment_0010_LEUT_PRICING_MATRIX_V15.xlsx XLSX spreadsheet
Attachment_0025_Past_Performance_Questionnaire_v2.doc DOC document
Attachment_0017,_VCI_Data_Requirements_for_Trailer_20170929_edits.xlsx XLSX spreadsheet
Attachment_0013,_Sample_Provisioning_Requirements_Statement.doc DOC document
Attachment_0016,_GFP_Tracker.xlsx XLSX spreadsheet
Attachment_0019,_Simulation_based_Design_Model_Data_CAE.doc DOC document
Attachment_0022,_JPO_JLTV_OPSEC_Plan.pdf PDF
Attachment_0020,_TDP_Requirements.docx DOCX document
Attachment_0009,_2408-9_Instructions.docx DOCX document
Attachment_0030,_Consolidated_GFP.pdf PDF
Attachment_0002,_DDD_for_ECPs_and_VECPs.doc DOC document
Attachment_0018,_Trailer_Vehicle_Dynamic_Data_Sheet_20170929_edits.xlsx XLSX spreadsheet
Attachment_0006,_DI-ILSS-80134A.pdf PDF
Attachment_0007,_DoD_Guide_UID_v3.0.pdf PDF
Attachment_0010_LEUT_PRICING_MATRIX_V14.xlsx XLSX spreadsheet
Attachment_0021,_Performance_Summary_Matrix_Revised_06_Feb_2018_edits.xlsx XLSX spreadsheet
Attachment_0011,_Sample_Level_Of_Repair_Analysis.docx DOCX document
Attachment_0023,_Controlled_Unclassified_Information_(CUI).pdf PDF
Attachment_0001,_ATPD-2414B_-_M1269_Type_II_LEUT.pdf PDF
Attachment_0029,_Superseding_Revisions_to_ATPD-2414B.pdf PDF
Attachment_0011,_Sample_Level_Of_Repair_Analysis.docx DOCX document
Attachment_0010_LEUT_PRICING_MATRIX_V14.xlsx XLSX spreadsheet
Attachment_0030,_Consolidated_GFP.pdf PDF
Attachment_0014,_MIL-STD_40051-2C.pdf PDF
Attachment_0019,_Simulation_based_Design_Model_Data_CAE.doc DOC document
Attachment_0005,_Maintenance_Analysis_29May14_RESERVED.docx DOCX document
Attachment_0016,_GFP_Tracker.xlsx XLSX spreadsheet
Attachment_0027,_Request_for_use_of_Prohibited_Materials_-_LEUT.doc DOC document
Attachment_0021,_Performance_Summary_Matrix_Revised_06_Feb_2018_edits.xlsx XLSX spreadsheet
Attachment_0010_LEUT_Pricing_Matrix_20180215.xlsx XLSX spreadsheet
Attachment_0001,_ATPD-2414B_-_M1269_Type_II_LEUT.pdf PDF
Attachment_0022,_JPO_JLTV_OPSEC_Plan.pdf PDF
Attachment_0006,_DI-ILSS-80134A.pdf PDF
Attachment_0023,_Controlled_Unclassified_Information_(CUI).pdf PDF
Attachment_0018,_Trailer_Vehicle_Dynamic_Data_Sheet_20170929_edits.xlsx XLSX spreadsheet
Attachment_0026,_LEUT_SOW_to_CLIN_Crosswalk_20180118_Clean.xlsx XLSX spreadsheet
W56HZV16R0210.pdf PDF
Attachment_0024,_Joint_Program_Office_(JPO)_Joint_Light_Tactical_Vehicle.pdf PDF
Attachment_0020,_TDP_Requirements.docx DOCX document
Type_II_LEUT_CDRLs_Signed_LATEST_VERSION_25Jan2018.docx DOCX document
Attachment_0003,_DDD_for_NORs_v1_RESERVED.doc DOC document
Attachment_0009,_2408-9_Instructions.docx DOCX document
Attachment_0013,_Sample_Provisioning_Requirements_Statement.doc DOC document
Qustion_Set_5_(W56HZV-16-R-0095).pdf PDF
ATPD-2414B__M1269_Type_II_LEUT.pdf PDF
Show 40 more

50 files listed here. See the rest on GovTribe.

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Print these results Portrait submit Landscape

FROM: TO:

COMPONENT HAND

RECEIPT:

END ITEM STOCK NUMBER: 5180-

01-548-7634

END ITEM DESCRIPTION: TOOL KIT, GENERAL MECHANICS

PUB NUMBER: 5180-95-B48

DATE OF LAST REVIEW: 13

NOVEMBER 2008

SC 9999-01-SKO PUB DATE: 01

SEPTEMBER 2011

LINE ITEM NUMBER:

T28688

C

A I A I

C NATIONAL STOCK N R I QTY QUANTITY ON HAND

T NUMBER D ITEM DESCRIPTION C C UI AUT A B C D E F G H I J K

N

5180-01-548-7634

A

TOOL KIT,GENERAL ME,

TOOL KIT, GENERAL

MECHANICS.,

N U SE

08292:0450

B

, BOX, TOOL.

DIMENSIONS: 15" W X

18" L X 24" H;

INTEGRATED SINGLE

EXTENSION HANDLE

AND WHEELS; EASY

OPENING LATCHES;

SEPARATE OPENING

LID AND FACE DOOR; 7

FOAM FILLED

DRAWERS W/TOOL

CUTOUTS;

WATERPROOF TO 1

METER; DRAWER

SPACING IS FIELD

CONFIGURABLE.,

EA 1

08292:TOP SHELF

, ITEMS BELOW ARE

STORED IN THE TOP

SHELF AREA.,

08292:037071G

, BAG, TOTE.

COLLAPSIBLE, MAX

DIMENSIONS 14" L X 10"

W X 3" THICK

(COLLAPSED); WATER

RESISTANT; ZIPPER

CLOSURE; CAPABLE OF

CARRYING UP TO

40LBS.,

EA 1

08292:07530G

, MULTI-TOOL. OVERALL

LENGTH: 5" (NOMINAL);

CONTAINS NEEDLE

NOSE PLIERS WITH

Page 1 of 41Hand Receipt

12/9/2011https://weblog.logsa.army.mil/sko/hand_receipt_illustration.cfm?RequestTimeout=500

WIRE CUTTER AND

CRIMPER , DROP POINT

KNIFE BLADE, METAL

FILE, THREE FLAT TIP

SCREWDRIVERS,

PHILLIPS TIP

SCREWDRIVER,

SERRATED KNIFE

BLADE, CAN OPENER,

BOTTLE OPENER,

RULER LANYARD EYE;

INCLUDES CARRYING

CASE.,

EA 1

08292:77-4BN

, METER, ELECTRICAL

TEST. DIGITAL

READOUT; 0 - 1000

VOLTS AC AND DC; 10

AMPS AC AND DC

CURRENT; CONTINUITY

TESTING; RESISTANCE

50M OHMS, DIODE TEST

FUNCTION. INCLUDES

TEST LEADS.,

EA 1

08292:S2500 OTG

, GLASSES, SAFETY.

FITS OVER

EYEGLASSES; CLEAR

LENS; BALLISTIC

PROTECTION.,

PR 1

5340-00-158-3805

B PADLOCK, PADLOCK. , X J EA 1

C

08292:R183

, SCREWDRIVER, FLAT

TIP; 1/8" TIP WIDTH, 3"

BLADE LENGTH, 5-1/4"

OVERALL LENGTH AND

2-1/4" HANDLE LENGTH.

REMARKS CODE 16

ITEM (I.E. ITEM

PURCHASED AT THE

COMMANDERS

DISCRETION). , THIS

ITEM IS NOT INITIALLY

ISSUED AS A

COMPONENT OFTHE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER. , THIS ITEM IS

NOT INITIALLY ISSUED

AS A COMPONENT OF

THE SKO. THE ITEM

MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

Page 2 of 41Hand Receipt

-01-112-9042

, CORD, ADJUSTABLE, 4

MM SNAP, 5' COIL:

LOCATION OF CORD IS

IN THE LID OF THE BOX;

REMARKS CODE 16

ITEM, THIS ITEM IS NOT

INITIALLY ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER. , THIS ITEM IS

NOT INITIALLY ISSUED

AS A COMPONENT OF

THE SKO. THE ITEM

MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:GOV87634DRW1

, DRAWER 1. ITEMS

BELOW ARE STORED IN

DRAWER 1.,

EA 1

08292:GMTKF-1

B , DRAWER 1 FOAM., EA 1

08292:2366

, FLASHLIGHT. LED;

COATED FLEXIBLE

EXTENSION CABLE;

WATER RESISTAND;

USES 2 AA BATTERIES;

INCLUDES A MAGNETIC

CLIP.,

EA 1

08292:70-790

, GAGE, THICKNESS.

MEASURES

CLEARANCES

FROM .0015" TO .035".

ALSO INCLUDES ONE

BRASS BLADE FOR USE

WITH ELECTRONIC

IGNITIONS. BLADE

LENGTH: 3-1/4"

NOMINAL. INCLUDES

THE FOLLOWING BLADE

SIZES: .0015, .002, .0025,

.003, .004, .005, .006, .007, .008, .009, .010, .010 (BRASS), .011, .012,

.013, .014, .015, .016, .017, .018, .019, .020, .021, .022, .023, .024, EA 1

Page 3 of 41Hand Receipt

.025, .026, .028, .030, .032, .035., 08292:56194

, KEY SET, HEX HEAD.

BALL END; METRIC; IN

THE FOLLOWING SIZES:

1.5MM, 2MM, 2.5MM,

3MM, 4MM, 5MM, 6MM,

8MM, AND 10MM.,

SE 1

08292:56190

, KEY SET, HEX HEAD.

BALL END; IN THE

FOLLOWING STANDARD

SIZES: .05", 1/16", 5/64",

3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", AND 3/8".,

SE 1

08292:70-933

, TOOL, RETRIEVING.

MAGNETIC; FLEXIBLE

HEAD; TELESCOPING.,

EA 1

08292:616

, RULE, MACHINIST.

OVERALL LENGTH: 6";

WIDTH: 1/2";

GRADUATED IN 10THS

AND 100THS.,

EA 1

08292:70-920

, MIRROR, INSPECTION.

1" X 2" MIRROR;

TELESCOPES TO 17".

ALL DIMENSIONS ARE

NOMINAL.,

EA 1

08292:66-598

, SCREWDRIVER,

OFFSET, RATCHET.

SMALL RATCHETING

SCREWDRIVER; TWO

SCREWDRIVER TIPS

SITUATED OPPOSITE

EACH OTHER; 1/4"

SLOTTED AND #2

CROSSTIP.,

EA 1

Page 4 of 41Hand Receipt

08292:10-926

, EXTENSION, SOCKET.

LOCKING; 1/4" DRIVE;

OVERALL LENGTH:

3" (NOMINAL).,

EA 1

08292:10-927

LOCKING; 1/4" DRIVE;

OVERALL LENGTH:

6" (NOMINAL).,

EA 1

08292:10-992

, HANDLE, RATCHET.

SEALED TEAR DROP

SHAPED HEAD; 1/4"

DRIVE.,

EA 1

08292:10-943

, HANDLE, SOCKET

WRENCH, SPEEDER.

SCREWDRIVER TYPE;

1/4" DRIVE; 1/4" FEMALE

SQUARE DRIVE IN END

OF HANDLE.,

EA 1

08292:10-106

, SOCKET, SOCKET

WRENCH. 1/4" DRIVE;

STANDARD LENGTH; 12

POINT; 3/16"

WRENCHING SIZE.,

EA 1

08292:10-107

WRENCH. 1/4" DRIVE;

STANDARD LENGTH; 12

POINT; 7/32"

WRENCHING SIZE.,

EA 1

08292:10-108

Page 5 of 41Hand Receipt

WRENCH. 1/4" DRIVE;

STANDARD LENGTH; 12

POINT; 1/4"

WRENCHING SIZE.,

EA 1

08292:10-109

WRENCH. 1/4" DRIVE;

STANDARD LENGTH; 12

POINT; 9/32"

WRENCHING SIZE.,

EA 1

08292:10-110

WRENCH. 1/4" DRIVE;

STANDARD LENGTH; 12

POINT; 5/16"

WRENCHING SIZE.,

EA 1

08292:10-111

WRENCH. 1/4" DRIVE;

STANDARD LENGTH; 12

POINT; 11/32"

WRENCHING SIZE.,

EA 1

08292:10-112

WRENCH. 1/4" DRIVE;

STANDARD LENGTH; 12

POINT; 3/8"

WRENCHING SIZE.,

EA 1

08292:10-114

WRENCH. 1/4" DRIVE;

STANDARD LENGTH; 12

POINT; 7/16"

WRENCHING SIZE.,

EA 1

08292:10-116

Page 6 of 41Hand Receipt

WRENCH. 1/4" DRIVE;

STANDARD LENGTH; 12

POINT; 1/2"

WRENCHING SIZE.,

EA 1

08292:37-105

WRENCH. 1/4" DRIVE;

STANDARD LENGTH; 12

POINT; 5MM

WRENCHING SIZE.,

EA 1

08292:37-106

WRENCH. 1/4" DRIVE;

STANDARD LENGTH; 12

POINT; 6MM

WRENCHING SIZE.,

EA 1

08292:37-107

WRENCH. 1/4" DRIVE;

STANDARD LENGTH; 12

POINT; 7MM

WRENCHING SIZE.,

EA 1

08292:37-108

WRENCH. 1/4" DRIVE;

STANDARD LENGTH; 12

POINT; 8MM

WRENCHING SIZE.,

EA 1

08292:37-110

WRENCH. 1/4" DRIVE;

STANDARD LENGTH; 12

POINT; 10MM

WRENCHING SIZE.,

EA 1

08292:16-850

Page 7 of 41Hand Receipt

, RAIL, SOCKET. FOR

USE WITH 1/4" DRIVE

SOCKETS AND

ACCESSORIES.,

EA 1

08292:16-841

, CLIPS. TO BE USED

WITH PART NUMBER 16-

850. , EA 14

08292:10-947

, JOINT, UNIVERSAL.

1/4" DRIVE., EA 1

08292:10-952

, ADAPTER, SOCKET

WRENCH. 1/4" DRIVE

(MALE) TO 3/8" DRIVE

(FEMALE).,

EA 1

08292:10-873

, BIT, TORX PLUS.

TAMPER-RESISTANT

TORX BIT; SIZE: T15;

1/4" DRIVE.,

EA 1

08292:10-877

TAMPER RESISTANT

TORX BIT; SIZE: T25;

1/4" DRIVE.,

EA 1

08292:27-264

Page 8 of 41Hand Receipt

, WRENCH, BOX.

STARTER WRENCH;

HALF MOON; 7/16" X

1/2"., EA 1

08292:27-268

, WRENCH, BOX.

STARTER WRENCH;

HALF MOON; 9/16" X

5/8"., EA 1

08292:34-301

, WRENCH, SPANNER.

ADJUSTABLE HOOK;

CAPACITY: 3/4" TO 2".,

EA 1

08292:71220

, BRUSH. 1-1/4" THICK;

2-1/4" TRIM LENGTH.

ALL DIMENSIONS ARE

NOMINAL.,

EA 1

08292:68-433

, MEASURE, TAPE.

SELF-RETRACTING;

LOCKING BLADE; 12FT

LENGTH (NOMINAL). ,

EA 1

08292:GOV87634DRW2

, DRAWER 2. ALL ITEMS

BELOW ARE

CONTAINED IN

DRAWER 2.,

EA 1

08292:GMTKF-2

Page 9 of 41Hand Receipt

, FOAM INSERT FOR

DRAWER 2. ,

EA 1

08292:70-313

, CHISEL, COLD. 3/4"

CUT., EA 1

08292:70-515

, BAR, PRY. ROLLING

HEAD. OVERALL

LENGTH:

16" (NOMINAL).,

08292:88260

, SET, SWISS PATTERN

FILE. 12 FILES; 0 CUT;

OVERALL LENGTH 6"

NOMINAL.,

SE 1

08292:16068

, FILE, HAND. ROUND; 8"

LENGTH (NOMINAL);

AMERICAN PATTERN;

SINGLE CUT; SMOOTH

CUT.,

EA 1

08292:15060

, FILE, HAND. MILL; 10"

LENGTH (NOMINAL) ;

AMERICAN PATTERN;

SINGLE CUT; SMOOTH

CUT.,

EA 1

08292:18058

Page 10 of 41Hand Receipt

, FILE, HAND. THREE

SQUARE; 8" LENGTH

(NOMINAL); DOUBLE

CUT; SECOND CUT.,

EA 1

08292:890

, HANDLE, FILE,

ADJUSTABLE, 1 IN.

DIAMETER,

APPROXIMATELY 4 IN.

OVERALL LENGTH,

EA 1

08292:70-193

, PUNCH, ALIGNING.

3/16" POINT SIZE; 10"

LONG (NOMINAL).,

EA 1

08292:70-235

, PUNCH, CENTER. 3/8"

BODY SIZE; OVERALL

LENGTH: 5" (NOMINAL).,

08292:70-105

, PUNCH, DRIVE PIN.

1/8" DIAMETER TIP;

OVERALL LENGTH:

5" (NOMINAL).,

EA 1

08292:70-131

1/4" DIAMETER TIP;

OVERALL LENGTH:

6" (NOMINAL).,

EA 1

08292:70-291

Page 11 of 41Hand Receipt

, PUNCH, BRASS. 3/4"

DIAMETER; OVERALL

LENGTH: 8". ALL

DIMENSIONS ARE

NOMINAL.,

EA 1

08292:70-293

, PUNCH, BRASS. 1/2"

DIAMETER; OVERALL

LENGTH: 7". ALL

DIMENSIONS ARE

NOMINAL.,

EA 1

08292:70-292

, PUNCH, BRASS. 1/4"

DIAMETER; OVERALL

LENGTH: 5". ALL

DIMENSIONS ARE

NOMINAL.,

EA 1

08292:70-133

5/16" DIAMETER TIP;

OVERALL LENGTH 7".,

EA 1

08292:70-049

, PUNCH, LONG PIN. 3/8"

DIAMETER TIP;

OVERALL LENGTH

8" (NOMINAL). ,

EA 1

08292:70-976

, KNIFE, PUTTY. BLADE

WIDTH: 1-1/2"; STIFF

BLADE, CUSHION GRIP

HANDLE.,

EA 1

08292:70-046

Page 12 of 41Hand Receipt

, SAW, HAND, JAB.

ACCEPTS STANDARD

RECIPROCATING SAW

BLADES. SINGLE BLADE

INCLUDED.,

EA 1

08292:GOV87634DRW3

, DRAWER 3. BELOW

ITEMS ARE CONTAINED

WITHIN DRAWER 3.,

EA 1

08292:GMTKF-3

DRAWER 3. ,

EA 1

08292:28-406

, WRENCH,

ADJUSTABLE. OVERALL

LENGTH: 6" ; JAW

OPENING: 15/16". ALL

DIMENSIONS ARE

NOMINAL.,

EA 1

08292:28-412

ADJUSTABLE. OVERALL

LENGTH: 12"; 1-1/2" JAW

OPENING. ALL

DIMENSIONS ARE

NOMINAL.,

EA 1

08292:67-109

, PLIERS. HEAVY DUTY;

DIAGONAL CUTTING;

OVERALL LENGTH:

7" (NOMINAL); CUSHION

GRIP HANDLES.,

EA 1

08292:67-307

Page 13 of 41Hand Receipt

, PLIERS. LONG NOSE

WITH WIRE CUTTERS;

8" OVERALL LENGTH

(NOMINAL); CUSHION

GRIP HANDLES.,

EA 1

08292:67-852

, PLIERS. ELECTRICAL

CONNECTOR;

REPLACEABLE SOFT

JAW INSERTS;

OVERALL LENGTH:

9" (NOMINAL).,

EA 1

08292:67-779

, PLIERS. TONGUE AND

GROOVE; OVERALL

LENGTH:

10" (NOMINAL);

CUSHION GRIP

HANDLES.,

EA 1

08292:67-667

, PLIERS. SLIP JOINT;

OVERALL LENGTH:

6" (NOMINAL); CUSHION

GRIP HANDLES.,

EA 1

08292:67-436

, PLIERS, LOCKING.

SINGLE HAND

RELEASE; OVERALL

LENGTH: 6" (NOMINAL). ,

08292:67-410

, PLIERS, LOCKING.

SINGLE HAND

RELEASE; OVERALL

LENGTH:

10" (NOMINAL).,

EA 1

08292:GOV87634DRW4

Page 14 of 41Hand Receipt

, DRAWER 4. ALL

BELOW ITEMS ARE

CONTAINED WITHIN

DRAWER #4. ,

EA 1

08292:GMTKF-4

DRAWER 4., EA 1

08292:25-210

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 5/16".,

EA 1

08292:25-211

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 11/32".,

EA 1

08292:25-212

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 3/8".,

EA 1

08292:25-214

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 7/16".,

EA 1

08292:25-216

Page 15 of 41Hand Receipt

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 1/2".,

EA 1

08292:25-218

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 9/16".,

EA 1

08292:25-220

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 5/8".,

EA 1

08292:25-222

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 11/16".,

EA 1

08292:25-224

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 3/4".,

EA 1

08292:25-226

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 13/16".,

EA 1

08292:25-228

Page 16 of 41Hand Receipt

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 7/8".,

EA 1

08292:25-230

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 15/16".,

EA 1

08292:25-232

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 1".,

EA 1

08292:28-430

, WRENCH, FLARE NUT.

3/8" X 7/16"; 6 POINT.,

EA 1

08292:28-435

1/2" X 9/16"; 6 POINT.,

EA 1

08292:28-440

5/8" X 11/16"; 6 POINT.,

EA 1

08292:28-442

Page 17 of 41Hand Receipt

3/4" X 7/8"; 6 POINT.,

EA 1

08292:GOV87634DRW5

, DRAWER 5. ALL ITEMS

BELOW ARE

CONTAINED WITHIN

DRAWER 5.,

EA 1

08292:GMTKF-5

DRAWER 5., EA 1

08292:52-207

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 7MM. ,

EA 1

08292:52-208

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 8MM. ,

EA 1

08292:52-209

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 9MM. ,

EA 1

08292:52-210

Page 18 of 41Hand Receipt

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 10MM. ,

EA 1

08292:52-211

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 11MM. ,

EA 1

08292:52-212

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 12MM. ,

EA 1

08292:52-213

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 13MM. ,

EA 1

08292:52-214

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 14MM. ,

EA 1

08292:52-215

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 15MM. ,

EA 1

08292:52-216

Page 19 of 41Hand Receipt

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 16MM. ,

EA 1

08292:52-217

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 17MM. ,

EA 1

08292:52-218

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 18MM. ,

EA 1

08292:52-219

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 19MM. ,

EA 1

08292:52-221

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 21MM. ,

EA 1

08292:52-222

COMBINATION.

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 22MM. ,

EA 1

08292:26-067

Page 20 of 41Hand Receipt

, WRENCH, OPEN END.

15 DEGREE ANGLED

HEAD; 1/2" X 9/16".,

EA 1

08292:26-043

15 DEGREE ANGLE

HEAD, 3/8" X 7/16".,

EA 1

08292:GOV87634DRW6

, DRAWER 6. ITEMS

BELOW ARE

CONTAINED IN

DRAWER 6.,

EA 1

08292:26-094

15 DEGREE ANGLED

HEAD; 5/8" X 11/16".,

EA 1

08292:GMTKF-6

DRAWER 6. ,

EA 1

08292:12-918

, HANDLE, HINGED.

BREAKER BAR; 1/2"

DRIVE; OVERALL

LENGTH:

15" (NOMINAL).,

EA 1

08292:11-918

Page 21 of 41Hand Receipt

, HANDLE, HINGED.

BREAKER BAR; 3/8"

DRIVE.,

EA 1

08292:12-931

LOCKING; 1/2" DRIVE;

OVERALL LENGTH:

3" (NOMINAL).,

EA 1

08292:12-936

LOCKING; 1/2" DRIVE;

OVERALL LENGTH:

5" (NOMINAL). ,

EA 1

08292:12-937

LOCKING; 1/2" DRIVE;

OVERALL LENGTH:

10" (NOMINAL). ,

EA 1

08292:11-934

LOCKING; 3/8" DRIVE;

OVERALL LENGTH:

3" (NOMINAL). ,

EA 1

08292:11-936

LOCKING; 3/8" DRIVE;

OVERALL LENGTH:

6" (NOMINAL). ,

EA 1

08292:11-992

Page 22 of 41Hand Receipt

TEAR DROP SHAPED

SEALED HEAD; 3/8"

DRIVE; STANDARD

LENGTH.,

EA 1

08292:12-935

, HANDLE, SOCKET

WRENCH. SPEEDER;

BRACE TYPE; 1/2"

DRIVE.,

EA 1

08292:GOV87634SS2

, SET, SOCKET. 3/8"

DRIVE; CONSISTS OF

THE BELOW ITEMS:,

SE 1

08292:11-110

WRENCH: 3/8" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 5/16". ,

08292:11-112

WRENCH: 3/8" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 3/8". ,

EA 1

08292:11-114

WRENCH: 3/8" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 7/16". ,

EA 1

08292:11-116

Page 23 of 41Hand Receipt

WRENCH: 3/8" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 1/2". ,

EA 1

08292:11-118

WRENCH: 3/8" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 9/16". ,

EA 1

08292:11-120

WRENCH: 3/8" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 5/8". ,

EA 1

08292:11-122

WRENCH: 3/8" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 11/16". ,

EA 1

08292:11-124

WRENCH: 3/8" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 3/4". ,

EA 1

08292:11-126

WRENCH: 3/8" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 13/16". ,

EA 1

08292:11-128

Page 24 of 41Hand Receipt

WRENCH: 3/8" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 7/8". ,

EA 1

08292:38-110

WRENCH: 3/8" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 10MM. ,

EA 1

08292:38-111

WRENCH: 3/8" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 11MM". ,

EA 1

08292:16-851

, RAIL, SOCKET.

OVERALL LENGTH:

10" (NOMINAL); FOR

USE WITH ABOVE 3/8"

DRIVE SOCKETS AND

ACCESSORIES.,

EA 1

08292:16-843

, CLIPS, RAIL. FOR USE

SOCKET RAILS THAT

UTILIZE 3/8" DRIVE

CLIPS. ,

EA 25

08292:GOV87634SS3

, SET, SOCKET. 3/8"

DRIVE; DEEP WELL;

BELOW SOCKETS ARE

CONTAINED IN THIS

SET:,

SE 1

08292:11-314

Page 25 of 41Hand Receipt

WRENCH: 3/8" DRIVE;

DEEP WELL LENGTH; 12

POINT; WRENCHING

SIZE: 7/16". ,

EA 1

08292:11-316

WRENCH: 3/8" DRIVE;

DEEP WELL LENGTH; 12

POINT; WRENCHING

SIZE: 1/2". ,

EA 1

08292:11-318

WRENCH: 3/8" DRIVE;

DEEP WELL LENGTH; 12

POINT; WRENCHING

SIZE: 9/16". ,

EA 1

08292:11-320

WRENCH: 3/8" DRIVE;

DEEP WELL LENGTH; 12

POINT; WRENCHING

SIZE: 5/8". ,

EA 1

08292:11-322

WRENCH: 3/8" DRIVE;

DEEP WELL LENGTH; 12

POINT; WRENCHING

SIZE: 11/16". ,

EA 1

08292:11-324

WRENCH: 3/8" DRIVE;

DEEP WELL LENGTH; 12

POINT; WRENCHING

SIZE: 3/4". ,

EA 1

08292:16-849

Page 26 of 41Hand Receipt

OVERALL LENGTH:

5" (NOMINAL).,

EA 1

08292:12-718

, SOCKET, HEX BIT. 1/2"

DRIVE; WRENCHING

SIZE: 9/16"; OVERALL

LENGTH: 3" (NOMINAL). ,

08292:12-717

, SOCKET, HEX BIT. 1/2"

DRIVE; WRENCHING

SIZE: 1/2"; OVERALL

LENGTH: 3" (NOMINAL). ,

08292:GOV87634SS4

, SOCKET SET, HEX BIT.

3/8" DRIVE; INCLUDES

BELOW SOCKETS. ,

SE 1

08292:11-715

, SOCKET, HEX BIT. 3/8"

DRIVE; WRENCHING

SIZE: 3/8". ,

EA 1

08292:11-714

DRIVE; WRENCHING

SIZE: 5/16". ,

EA 1

08292:11-713

Page 27 of 41Hand Receipt

DRIVE; WRENCHING

SIZE: 1/4". ,

EA 1

08292:11-712

DRIVE; WRENCHING

SIZE: 7/32". ,

EA 1

08292:11-711

DRIVE; WRENCHING

SIZE: 3/16". ,

EA 1

08292:11-710

DRIVE; WRENCHING

SIZE: 5/32". ,

EA 1

08292:11-890

TAMPER RESISTANT;

WRENCHING SIZE: T40;

3/8" DRIVE.,

EA 1

08292:16-852

OVERALL LENGTH:

5" (NOMINAL); FOR USE

WITH ABOVE 3/8" DRIVE

SOCKETS AND

ACCESSORIES.,

EA 1

08292:11-947

Page 28 of 41Hand Receipt

, UNIVERSAL JOINT. 3/8"

DRIVE., EA 1

08292:12-947

, UNIVERSAL JOINT. 1/2"

DRIVE., EA 1

08292:GOV87634DRW7

, DRAWER 7. ALL

BELOW ITEMS ARE

CONTAINED IN

DRAWER 7.,

EA 1

08292:GMTKF-7

DRAWER 7. ,

EA 1

08292:69-408

, HAMMER, HAND.

BALLPEEN;

MACHINISTS; 16 OUNCE

HEAD (NOMINAL);

CUSHION GRIP

HANDLE. ,

EA 1

08292:12-992

1/2" DRIVE; SEALED

TEARDROP HEAD;

STANDARD LENGTH.,

EA 1

08292:66-400

Page 29 of 41Hand Receipt

, SCREWDRIVER.

CROSSTIP; SIZE: #1;

OVERALL BLADE

LENGTH: 3" (NOMINAL);

SOFTGRIP HANDLE.,

EA 1

08292:66-402

CROSSTIP; SIZE: #2;

OVERALL BLADE

LENGTH: 4" (NOMINAL);

SOFTGRIP HANDLE.,

EA 1

08292:66-404

CROSSTIP; SIZE: #3;

OVERALL BLADE

LENGTH: 6" (NOMINAL);

SOFTGRIP HANDLE.,

EA 1

08292:66-441

FLATTIP; SIZE: 1/4";

OVERALL BLADE

LENGTH: 4" (NOMINAL);

SOFTGRIP HANDLE.,

EA 1

08292:66-445

FLATTIP; SIZE: 3/8";

OVERALL BLADE

LENGTH: 8" (NOMINAL);

SOFTGRIP HANDLE.,

EA 1

08292:66-443

FLATTIP; SIZE: 5/16";

OVERALL BLADE

LENGTH: 6" (NOMINAL);

SOFTGRIP HANDLE.,

EA 1

08292:66-580

, HANDLE,

SCREWDRIVER.

Page 30 of 41Hand Receipt

RATCHETING; WITH

REPLACEABLE BIT SET;

BITS CONSIST OF THE

FOLLOWING: 3/16" AND

9/32" FLAT TIP BIT; #1

AND #2 PHILLIPS BITS;

T10 AND T15 TORX

BITS.,

EA 1

08292:GOV87364SS5

, SET, SOCKET. 1/2"

DRIVE; 12 POINT;

STANDARD LENGTH;

CONSISTS OF THE

FOLLOWING:,

SE 1

08292:12-112

WRENCH: 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 3/8". ,

EA 1

08292:12-114

WRENCH: 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 7/16". ,

EA 1

08292:12-116

WRENCH: 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 1/2". ,

EA 1

08292:12-118

WRENCH: 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 9/16". ,

EA 1

08292:12-120

Page 31 of 41Hand Receipt

WRENCH: 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 5/8". ,

EA 1

08292:12-122

WRENCH: 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 11/16". ,

EA 1

08292:12-124

WRENCH: 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 3/4". ,

EA 1

08292:12-126

WRENCH: 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 13/16". ,

EA 1

08292:12-128

WRENCH: 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 7/8". ,

EA 1

08292:12-130

WRENCH: 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 15/16". ,

EA 1

08292:12-132

Page 32 of 41Hand Receipt

WRENCH: 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 1". ,

EA 1

08292:12-134

WRENCH: 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 1-1/16". ,

EA 1

08292:12-136

WRENCH: 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 1-1/8". ,

EA 1

08292:12-138

WRENCH: 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 1-3/16". ,

EA 1

08292:12-140

WRENCH: 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 1-1/4". ,

EA 1

08292:16-853

, RAIL, SOCKET. FOR

USE WITH ABOVE

SOCKETS. OVERALL

LENGTH:

17" (NOMINAL).,

EA 1

, CLIPS, SOCKET. FOR

USE WITH 1/2" DRIVE

SOCKETS AND

Page 33 of 41Hand Receipt

08292:16-845

ACCESSORIES. 26

CLIPS ARE

AUTHORIZED IN THE

BASIC GMTK; 41 CLIPS

ARE AUTHORIZED IN

THE BASIC GMTK + THE

ACCESSORY DRAWER

(15 CLIPS IN THE

ACCESSORY DRAWER);

39 CLIPS AUTHORIZED

IF YOU HAVE THE

BASIC GMTK + THE

MARINE CORP DRAWER

(13 CLIPS IN THE

MARINE CORP

DRAWER).,

EA 41

08292:GOV87634SS6

, SET, SOCKET. 1/2"

DRIVE; STANDARD

LENGTH; 12 POINT;

CONSISTS OF THE

BELOW ITEMS:,

SE 1

08292:39-112

WRENCH. 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 12MM. ,

EA 1

08292:39-113

WRENCH. 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 13MM. ,

EA 1

08292:39-114

WRENCH. 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 14MM. ,

EA 1

N

08292:39-115

B

, SOCKET, SOCKET

WRENCH. 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 15MM. ,

EA 1

Page 34 of 41Hand Receipt

08292:39-116

WRENCH. 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 16MM. ,

EA 1

08292:39-117

WRENCH. 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 17MM. ,

EA 1

08292:39-118

WRENCH. 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 18MM. ,

EA 1

08292:38-119

WRENCH. 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 19MM. ,

EA 1

08292:39-121

WRENCH. 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 21MM. ,

EA 1

08292:39-122

Page 35 of 41Hand Receipt

WRENCH. 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 22MM. ,

EA 1

08292:39-124

WRENCH. 1/2" DRIVE;

STANDARD LENGTH; 12

POINT; WRENCHING

SIZE: 24MM. ,

EA 1

08292:16-854

OVERALL LENGTH:

11" (NOMINAL); FOR

USE WITH ABOVE 1/2"

DRIVE SOCKETS AND

ACCESSORIES.,

EA 1

08292:68-178

, PLIERS. WIRE

TWISTER; 12" OVERALL

LENGTH (NOMINAL). ,

EA 1

08292:39-310

, WRENCH, SOCKE. 1/2"

DRIVE; DEEP WELL; 12

POINT; 10MM SIZE.,

EA 1

5180-01-553-6559

DRAWER,ACCESSORY,

BELOW ITEMS ARE

CONTAINED IN THE

ACCESSORY DRAWER:,

THIS ITEM IS NOT

INITIALLY ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

D M EA 1

08292:0453-931-112

, TRAY, TOOL. PLASTIC;

FITS INTO TOP TOOL

STORAGE BAY OF TOOL

Page 36 of 41Hand Receipt

CHEST., THIS ITEM IS

NOT INITIALLY ISSUED

AS A COMPONENT OF

THE SKO. THE ITEM

MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:12-312

WRENCH. 1/2" DRIVE;

DEEP WELL; 12 POINT;

WRENCHING SIZE: 3/8".

, THIS ITEM IS NOT

INITIALLY ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:12-314

WRENCH. 1/2" DRIVE;

DEEP WELL; 12 POINT;

WRENCHING SIZE:

7/16". , THIS ITEM IS

NOT INITIALLY ISSUED

AS A COMPONENT OF

THE SKO. THE ITEM

MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:12-316

WRENCH. 1/2" DRIVE;

DEEP WELL; 12 POINT;

WRENCHING SIZE: 1/2".

, THIS ITEM IS NOT

INITIALLY ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:12-318

WRENCH. 1/2" DRIVE;

DEEP WELL; 12 POINT;

WRENCHING SIZE:

9/16". , THIS ITEM IS

NOT INITIALLY ISSUED

AS A COMPONENT OF

THE SKO. THE ITEM

MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:12-320

WRENCH. 1/2" DRIVE;

DEEP WELL; 12 POINT;

WRENCHING SIZE: 5/8".

, THIS ITEM IS NOT

INITIALLY ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

Page 37 of 41Hand Receipt

08292:GMTKF-AT1

, INSERT, FOAM. FOAM

INSERT FOR

ACCESSORY TOOL

TRAY., THIS ITEM IS

NOT INITIALLY ISSUED

AS A COMPONENT OF

THE SKO. THE ITEM

MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:12-322

WRENCH. 1/2" DRIVE;

DEEP WELL; 12 POINT;

WRENCHING SIZE:

11/16". , THIS ITEM IS

NOT INITIALLY ISSUED

AS A COMPONENT OF

THE SKO. THE ITEM

MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:12-324

WRENCH. 1/2" DRIVE;

DEEP WELL; 12 POINT;

WRENCHING SIZE: 3/4".

, THIS ITEM IS NOT

INITIALLY ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:12-326

WRENCH. 1/2" DRIVE;

DEEP WELL; 12 POINT;

WRENCHING SIZE:

13/16". , THIS ITEM IS

NOT INITIALLY ISSUED

AS A COMPONENT OF

THE SKO. THE ITEM

MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:12-328

WRENCH. 1/2" DRIVE;

DEEP WELL; 12 POINT;

WRENCHING SIZE: 7/8".

, THIS ITEM IS NOT

INITIALLY ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA

N

08292:16-833

B

, RAIL, SOCKET. FOR

USE WITH 1/2" DRIVE

SOCKETS AND

ACCESSORIES.

OVERALL LENGTH: 8-

1/2" (NOMINAL). , THIS

ITEM IS NOT INITIALLY

ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

EA 1

Page 38 of 41Hand Receipt

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

08292:12-330

WRENCH. 1/2" DRIVE;

DEEP WELL; 12 POINT;

WRENCHING SIZE:

15/16". , THIS ITEM IS

NOT INITIALLY ISSUED

AS A COMPONENT OF

THE SKO. THE ITEM

MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:12-332

WRENCH. 1/2" DRIVE;

DEEP WELL; 12 POINT;

WRENCHING SIZE: 1". ,

THIS ITEM IS NOT

INITIALLY ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:12-334

WRENCH. 1/2" DRIVE;

DEEP WELL; 12 POINT;

WRENCHING SIZE: 1-

1/16". , THIS ITEM IS

NOT INITIALLY ISSUED

AS A COMPONENT OF

THE SKO. THE ITEM

MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:12-336

WRENCH. 1/2" DRIVE;

DEEP WELL; 12 POINT;

WRENCHING SIZE: 1-

1/8". , THIS ITEM IS NOT

INITIALLY ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

N

08292:12-338

B

, SOCKET, SOCKET

WRENCH. 1/2" DRIVE;

DEEP WELL; 12 POINT;

WRENCHING SIZE: 1-

3/16". , THIS ITEM IS

NOT INITIALLY ISSUED

AS A COMPONENT OF

THE SKO. THE ITEM

MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

EA 1

Page 39 of 41Hand Receipt

08292:12-340

WRENCH. 1/2" DRIVE;

DEEP WELL; 12 POINT;

WRENCHING SIZE: 1-

1/4". , THIS ITEM IS NOT

INITIALLY ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:28-810

COMBINATION.

RATCHETING;

REVERSIBLE; 12 POINT;

WRENCHING SIZE:

5/16"., THIS ITEM IS NOT

INITIALLY ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:28-812

COMBINATION.

RATCHETING;

REVERSIBLE; 12 POINT;

WRENCHING SIZE: 3/8".,

THIS ITEM IS NOT

INITIALLY ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:28-814

COMBINATION.

RATCHETING;

REVERSIBLE; 12 POINT;

WRENCHING SIZE:

7/16"., THIS ITEM IS NOT

INITIALLY ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

N

08292:28-816

B

, WRENCH,

COMBINATION.

RATCHETING;

REVERSIBLE; 12 POINT;

WRENCHING SIZE: 1/2".,

THIS ITEM IS NOT

INITIALLY ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

EA 1

Page 40 of 41Hand Receipt

COMMANDING

08292:28-818

COMBINATION.

RATCHETING;

REVERSIBLE; 12 POINT;

WRENCHING SIZE:

9/16"., THIS ITEM IS NOT

INITIALLY ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:28-820

COMBINATION.

RATCHETING;

REVERSIBLE; 12 POINT;

WRENCHING SIZE: 5/8".,

THIS ITEM IS NOT

INITIALLY ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:28-822

COMBINATION.

RATCHETING;

REVERSIBLE; 12 POINT;

WRENCHING SIZE:

11/16"., THIS ITEM IS

NOT INITIALLY ISSUED

AS A COMPONENT OF

THE SKO. THE ITEM

MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

08292:28-824

COMBINATION.

RATCHETING;

REVERSIBLE; 12 POINT;

WRENCHING SIZE: 3/4".,

THIS ITEM IS NOT

INITIALLY ISSUED AS A

COMPONENT OF THE

SKO. THE ITEM MAY BE

REQUISITIONED "AS

REQUIRED" WHEN

AUTHORIZED BY THE

COMMANDING

OFFICER.

EA 1

Print these results Portrait submit Landscape

Page 41 of 41Hand Receipt

File details come from the government source that posted it.