07 14 00 Fluid-applied waterproofing.pdf

ANG/ WI - F- 35: Muni t i ons M&I Faci l i t y Tr uax Fi el d, WI I ssued For Const r uct i on 27 Oct ober 2023

SECTI ON 07 14 00

FLUI D- APPLI ED WATERPROOFI NG AND DRAI NAGE BOARD

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

ASTM I NTERNATI ONAL ( ASTM)

ASTM C33/ C33M ( 2023) St andar d Speci f i cat i on f or Concr et e Aggr egat es

ASTM C578 ( 2023) St andar d Speci f i cat i on f or Ri gi d, Cel l ul ar Pol yst yr ene Ther mal I nsul at i on

ASTM C836/ C836M ( 2018; R 2022) St andar d Speci f i cat i on f or Hi gh Sol i ds Cont ent , Col d Li qui d- Appl i ed El ast omer i c Wat er pr oof i ng Membr ane f or Use Wi t h Separ at e Wear i ng Cour se

ASTM D5957 ( 1998; R 2021) St andar d Gui de f or Fl ood Test i ng Hor i zont al Wat er pr oof i ng I nst al l at i ons

1. 2 SUBMI TTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" or " S" c l assi f i cat i on. Submi t t al s not havi ng a " G" or " S" c l assi f i cat i on ar e f or Cont r act or Qual i t y Cont r ol appr oval . Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL PROCEDURES:

SD- 03 Pr oduct Dat a

Fl ui d- Appl i ed Membr ane

Membr ane Pr i mer

Sol vent

Moi st ur e Met er

Dr ai nage Boar d

Bond Br eaker

SD- 06 Test Repor t s

Fl ood Test i ng; G

SECTI ON 07 14 00 Page 1

ADDENDUM #3; 05-09-2024

Gallagher, Brad K.

Cloud

SD- 11 Cl oseout Submi t t al s

War r ant y

I nf or mat i on Car d

Mai nt enance and Repai r Tr ai ni ng

I ncl ude copi es of Saf et y Dat a Sheet s f or mai nt enance/ r epai r mat er i al s.

1. 3 PREWATERPROOFI NG CONFERENCE

Pr i or t o st ar t i ng appl i cat i on of wat er pr oof i ng syst em, ar r ange and at t end a pr ewat er pr oof i ng conf er ence t o ensur e a c l ear under st andi ng of dr awi ngs and speci f i cat i ons. Gi ve t he Cont r act i ng Of f i cer 7 days advance wr i t t en not i ce of t he t i me and pl ace of meet i ng. Ensur e t hat t he mechani cal and el ect r i cal subcont r act or , f l ashi ng and sheet met al subcont r act or , and ot her t r ades t hat may per f or m ot her t ypes of wor k on or over t he membr ane af t er i nst al l at i on, at t end t hi s conf er ence.

1. 4 DELI VERY, STORAGE, AND HANDLI NG

Del i ver wat er pr oof i ng mat er i al s i n manuf act ur er ' s or i gi nal , unopened cont ai ner s, wi t h l abel s i nt act and l egi bl e. Cont ai ner s of mat er i al s cover ed by a r ef er enced speci f i cat i on number must bear t he speci f i cat i on number , t ype, and cl ass of t he cont ent s. Del i ver mat er i al s i n suf f i c i ent quant i t y t o cont i nue wor k wi t hout i nt er r upt i on. St or e and pr ot ect mat er i al s i n accor dance wi t h manuf act ur er ' s i nst r uct i ons, and use wi t hi n t hei r i ndi cat ed shel f l i f e. When hazar dous mat er i al s ar e i nvol ved, adher e t o speci al pr ecaut i ons of t he manuf act ur er , unl ess pr ecaut i ons conf l i c t wi t h l ocal , st at e, and f eder al r egul at i ons. Pr ompt l y r emove f r om t he si t e mat er i al s or i ncompl et e wor k adver sel y af f ect ed by exposur e t o moi st ur e or f r eezi ng. St or e mat er i al s on pal l et s and cover f r om t op t o bot t om wi t h canvas t ar paul i ns.

1. 5 ENVI RONMENTAL CONDI TI ONS

Appl y mat er i al s when ambi ent t emper at ur e i s 40 degr ees F or above f or a per i od of 24 hour s pr i or t o t he appl i cat i on and when t her e i s no i ce, f r ost , sur f ace moi st ur e, or v i s i bl e dampness on t he subst r at e sur f ace.

Appl y mat er i al s when ai r t emper at ur e i s expect ed t o r emai n above 40 degr ees F dur i ng t he cur e per i od r ecommended by t he manuf act ur er .

Moi st ur e t est f or subst r at e i s speci f i ed under par agr aph MOI STURE TEST.

Wor k may be per f or med wi t hi n heat ed encl osur es, pr ovi ded t he sur f ace t emper at ur e of t he subst r at e i s mai nt ai ned at a mi ni mum of 40 degr ees F f or 24 hour s pr i or t o t he appl i cat i on of t he wat er pr oof i ng, and r emai ns above t hat t emper at ur e dur i ng t he cur e per i od r ecommended by t he manuf act ur er .

1. 6 WARRANTY

Pr ovi de syst em mat er i al and wor kmanshi p war r ant i es meet i ng speci f i ed r equi r ement s. Pr ovi de r evi s i ons or amendment t o st andar d membr ane manuf act ur er war r ant y t o compl y wi t h t he speci f i ed r equi r ement s. Pr ovi de a manuf act ur er ' s war r ant y t hat has no dol l ar l i mi t , cover s f ul l syst em

SECTI ON 07 14 00 Page 2 wat er - t i ght ness, and has a mi ni mum dur at i on of 20 year s.

1. 6. 1 Membr ane Manuf act ur er War r ant y

Pr ovi de t he membr ane manuf act ur er ' s 20- year no dol l ar l i mi t syst em mat er i al s and i nst al l at i on wor kmanshi p war r ant y, i ncl udi ng f l ashi ng, i nsul at i on, and accessor i es necessar y f or a wat er t i ght syst em const r uct i on. Wr i t e t he war r ant y di r ect l y t o t he Gover nment commenci ng at t i me of Gover nment ' s accept ance of t he wor k. Pr ovi de t he f ol l owi ng st at ement s f or such war r ant y:

a. I f wi t hi n t he war r ant y per i od t he syst em, as i nst al l ed f or i t s i nt ended use i n t he nor mal c l i mat i c and envi r onment al condi t i ons of t he f aci l i t y , becomes non- wat er t i ght , shows evi dence of moi st ur e i nt r usi on wi t hi n t he assembl y, bl i s t er s, spl i t s, t ear s, cr acks, del ami nat es, separ at es at t he seams, or shows evi dence of excessi ve weat her i ng due t o def ect i ve mat er i al s or i nst al l at i on wor kmanshi p, t he r epai r or r epl acement of t he def ect i ve and damaged mat er i al s of t he syst em assembl y and cor r ect i on of def ect i ve wor kmanshi p ar e t he r esponsi bi l i t y of t he membr ane manuf act ur er . Al l cost s associ at ed wi t h t he r epai r or r epl acement wor k ar e t he r esponsi bi l i t y of t he membr ane manuf act ur er .

b. The war r ant y must r emai n i n f ul l f or ce and ef f ect , i ncl udi ng emer gency t empor ar y r epai r s per f or med by ot her s, when t he manuf act ur er or hi s appr oved appl i cat or f ai l t o per f or m t he r epai r s wi t hi n 72 hour s of not i f i cat i on.

1. 6. 2 Cont i nuance of War r ant y

Repai r or r epl acement wor k t hat becomes necessar y wi t hi n t he war r ant y per i od must be appr oved and accompl i shed i n a manner so as t o r est or e t he i nt egr i t y of t he syst em assembl y and val i di t y of t he membr ane manuf act ur er war r ant y f or t he r emai nder of t he manuf act ur er war r ant y per i od.

PART 2 PRODUCTS

2. 1 FLUI D- APPLI ED MEMBRANE

ASTM C836/ C836M.

2. 2 MEMBRANE PRI MER

As r ecommended by t he f l ui d- appl i ed membr ane manuf act ur er unl ess speci f i cal l y pr ohi bi t ed by t he manuf act ur er of t he f l ui d- appl i ed membr ane.

2. 3 SEALANT

As speci f i ed i n Sect i on 07 92 00 JOI NT SEALANTS.

2. 4 SEALANT PRI MER

As speci f i ed i n Sect i on 07 92 00 JOI NT SEALANTS.

2. 5 JOI NT FI LLER

As speci f i ed i n Sect i on 03 30 00 CAST- I N- PLACE CONCRETE, .

SECTI ON 07 14 00 Page 3

2. 6 BOND BREAKER

As r ecommended by t he f l ui d- appl i ed membr ane manuf act ur er . Bond br eaker must not i nt er f er e wi t h t he cur i ng pr ocess or ot her per f or mance pr oper t i es of t he f l ui d- appl i ed membr ane. Submi t mat er i al descr i pt i on and physi cal pr oper t i es, appl i cat i on det ai l s, and r ecommendat i ons r egar di ng shel f l i f e, appl i cat i on pr ocedur es, and pr ecaut i ons on f l ammabi l i t y and t oxi c i t y.

2. 7 DRAI NAGE BOARD

Pr emol ded, di mpl ed, HDPE ( Hi gh- densi t y Pol yet hyl ene) composi t i on boar d, 240 mi l mi ni mum t hi ckness Mechani cal l y f ast en t o pour ed- i n- pl ace concr et e at l ocat i ons bel ow gr ade. Pr ovi de a mi ni mum R- r esi st ance of R=0. 63, wi t h a vapor per meabi l i t y of 0. 452 per ms.

2. 8 DRAI NAGE COURSE AGGREGATE

ASTM C33/ C33M, s i ze No. 8.

2. 9 I NSULATI ON

Pol yst yr ene f oam conf or mi ng t o ASTM C578, Cl ass I V, t hi ckness as i ndi cat ed on t he dr awi ngs.

PART 3 EXECUTI ON

3. 1 PREPARATI ON

Coor di nat e wor k wi t h t hat of ot her t r ades t o ensur e t hat component s t o be i ncor por at ed i nt o t he wat er pr oof i ng syst em ar e avai l abl e when needed.

I nspect and appr ove sur f aces i mmedi at el y bef or e appl i cat i on of wat er pr oof i ng mat er i al s. Remove l ai t ance, l oose aggr egat e, shar p pr oj ect i ons, gr ease, oi l , di r t , cur i ng compounds, and ot her cont ami nant s whi ch coul d adver sel y af f ect t he compl et e bondi ng of t he f l ui d- appl i ed membr ane t o t he concr et e sur f ace.

3. 1. 1 Cr acks and Joi nt s

Pr epar e v i s i bl e cr acks and j oi nt s i n subst r at e t o r ecei ve f l ui d- appl i ed wat er pr oof i ng membr ane by pl aci ng a bond br eaker and an el ast omer i c s l i p sheet bet ween membr ane and subst r at e. Appl y a 2 i nch bond br eaker t o cr acks t hat show movement f ol l owed by an el ast omer i c sheet adher ed t o t he deck. Nonmovi ng cr acks must be doubl e coat ed wi t h f l ui d- appl i ed wat er pr oof i ng.

3. 1. 2 Pr i mi ng

Pr i me sur f aces t o r ecei ve f l ui d- appl i ed wat er pr oof i ng membr ane. Appl y pr i mer as r equi r ed by membr ane manuf act ur er ' s pr i nt ed i nst r uct i ons.

3. 2 SPECI AL PRECAUTI ONS

Pr ot ect wat er pr oof i ng mat er i al s dur i ng t r anspor t and appl i cat i on. Do not di l ut e pr i mer s and ot her mat er i al s, unl ess speci f i cal l y r ecommended by mat er i al s manuf act ur er . Keep cont ai ner s c l osed except when r emovi ng cont ent s. Do not mi x r emai ns of unl i ke mat er i al s. Thor oughl y r emove r esi dual mat er i al s bef or e usi ng appl i cat i on equi pment f or mi xi ng and t r anspor t i ng mat er i al s. Do not per mi t equi pment on t he pr oj ect s i t e t hat has r esi due of mat er i al s used on pr evi ous pr oj ect s. Use cl eaner s onl y f or

SECTI ON 07 14 00 Page 4 cl eani ng, not f or t hi nni ng pr i mer s or membr ane mat er i al s. Ensur e t hat wor ker s and ot her s who wal k on cur ed membr ane wear c l ean, sof t - sol ed shoes t o avoi d damagi ng t he wat er pr oof i ng mat er i al s.

3. 3 APPLI CATI ON

Over pr i med sur f aces, pr ovi de a uni f or m, wet , monol i t hi c coat i ng of f l ui d- appl i ed membr ane, 60 mi l s t hi ck, pl us or mi nus 5 mi l s by f ol l owi ng manuf act ur er ' s pr i nt ed i nst r uct i ons. Appl y mat er i al by t r owel , squeegee, r ol l er , br ush, spr ay appar at us, or ot her met hod r ecommended by membr ane manuf act ur er . Check wet f i l m t hi ckness as speci f i ed i n par agr aph FI LM THI CKNESS and adj ust appl i cat i on r at e as necessar y t o pr ovi de a uni f or m coat i ng of t he t hi ckness speci f i ed. Wher e possi bl e, mar k of f sur f ace t o be coat ed i n equal uni t s t o f aci l i t at e pr oper cover age. At expansi on j oi nt s, cont r ol j oi nt s, pr epar ed cr acks, f l ashi ng, and t er mi nat i ons, car r y membr ane over pr ef or med el ast omer i c sheet i n a uni f or m 60 mi l t hi ck, pl us or mi nus 5 mi l s, wet t hi ckness t o pr ovi de a monol i t hi c coat i ng. I f membr ane cur es bef or e next appl i cat i on, wi pe pr evi ousl y appl i ed membr ane wi t h a sol vent t o r emove di r t and dust t hat coul d i nhi bi t adhesi on of over l appi ng membr ane coat . Use sol vent r ecommended by t he membr ane manuf act ur er , as appr oved.

3. 3. 1 Wor k Sequence

Per f or m wor k so t hat dr ai nage boar d i s i nst al l ed pr i or t o usi ng t he wat er pr oof ed sur f ace. Do not per manent l y i nst al l dr ai nage boar d unt i l t he membr ane has passed t he f l ood t est speci f i ed under par agr aph FLOOD TESTI NG. Move mat er i al st or age ar eas as wor k pr ogr esses t o pr event abuse of membr ane and over l oadi ng of st r uct ur al deck.

3. 3. 2 Dr ai nage Boar d

Pr ot ect f l ui d- appl i ed membr ane by pl aci ng a mi ni mum 240 mi l hi gh densi t y pol yet hyl ene dr ai nage boar d over f l ui d appl i ed membr ane at a t i me r ecommended by t he membr ane manuf act ur er . Dr ai nage boar d must be di mpl ed t o pr ovi de a dr ai nage r egi on at t he concr et e sur f ace. Dr ai nage boar d i s t o be mechani cal l y f ast ened t o t he concr et e. Pr ot ect membr ane appl i cat i on when pr ot ect i on boar d i s not pl aced i mmedi at el y. Fol l ow manuf act ur er ' s i nst al l at i on met hods f or at t achi ng, over l appi ng, and secur i ng dr ai nage boar d i nt o pl ace.

3. 3. 3 Si l t Fabr i c

Pl ace 100 gr am si l t f abr i c wher e shown, over i nsul at i on boar d, af t er f l ood t est s ar e compl et ed and concr et e pr ot ect i on s l ab or wear i ng cour se i s r eady t o be i nst al l ed.

3. 3. 4 I nsul at i on

Pl ace i nsul at i on of t hi ckness i ndi cat ed, on t op of dr ai nage cour se j ust pr i or t o pl acement of concr et e pr ot ect i on s l ab.

3. 4 FI ELD QUALI TY CONTROL

3. 4. 1 Moi st ur e Test

Pr i or t o appl i cat i on of f l ui d- appl i ed wat er pr oof i ng, measur e moi st ur e cont ent of subst r at e wi t h a moi st ur e met er i n t he pr esence of t he Cont r act i ng Of f i cer . Do not begi n appl i cat i on unt i l met er r eadi ng

SECTI ON 07 14 00 Page 5 i ndi cat es " dr y" r ange as per manuf act ur er ' s i nst al l at i on i nst r uct i ons.

3. 4. 2 Fi l m Thi ckness

Measur e wet f i l m t hi ckness ever y 100 squar e f eet dur i ng appl i cat i on by pl aci ng f l at met al pl at es on t he subst r at e or usi ng a mi l - t hi ckness gage especi al l y manuf act ur ed f or t he pur pose.

3. 4. 3 Fl ood Test i ng

Af t er appl i cat i on and cur i ng i s compl et e, f l ood t est t he wat er pr oof ed ar ea i n accor dance wi t h ASTM D5957. Fl ood t est ar ea wi t h wat er t o achi eve a mi ni mum cover of one i nch but not exceed a maxi mum dept h of 4 i nches at t he l owest poi nt . Mai nt ai n wat er hei ght so as not t o exceed a mi ni mum l evel of 2 i nches bel ow t he edge of f l ashi ngs. Pl ug dr ai ns and f i l l wat er pr oof ed ar ea wi t h wat er t o a dept h of 2 i nches. A mi ni mum 48- hour cur e t i me, or l onger cur e t i me i f r ecommended by t he membr ane manuf act ur er , i s r equi r ed pr i or t o f l ood t est i ng. Al l ow wat er t o st and 24 hour s. Test wat er t i ght ness by measur i ng wat er l evel at begi nni ng and end of t he 24- hour per i od. I f wat er l evel f al l s , dr ai n wat er , al l ow i nst al l at i on t o dr y, and i nspect . Make r epai r s or r epl ace as r equi r ed and r epeat t he t est . Do not pr oceed wi t h wor k bef or e appr oval of r epai r s or r epl acement .

3. 5 MAI NTENANCE AND REPAI R TRAI NI NG

Pr ovi de wr i t t en and ver bal i nst r uct i ons on pr oper mai nt enance pr ocedur es t o desi gnat ed Gover nment per sonnel . Ver bal i nst r uct i ons must be pr ovi ded by a compet ent r epr esent at i ve of t he membr ane manuf act ur er and i ncl ude a mi ni mum of 4 hour s on mai nt enance and emer gency r epai r of t he membr ane.

I ncl ude a demonst r at i on of membr ane r epai r , and gi ve sour ces of r equi r ed speci al t ool s. Pr ovi de i nf or mat i on on saf et y r equi r ement s dur i ng mai nt enance and emer gency r epai r oper at i ons.

3. 6 I NFORMATI ON CARD

For each syst em appl i cat i on, pr ovi de a mi ni mum 8- 1/ 2 i nch by 11 i nch i nf or mat i on car d f or f aci l i t y r ecor ds and a car d l ami nat ed i n pl ast i c and f r amed f or i nt er i or di spl ay at access poi nt , or a phot oengr aved 0. 032 i nch t hi ck al umi num car d f or ext er i or di spl ay. I dent i f y f aci l i t y name and number ; l ocat i on; Cont r act number ; appr oxi mat e ar ea; det ai l ed syst em descr i pt i on, i ncl udi ng deck t ype, membr ane, number of pl i es, met hod of appl i cat i on, manuf act ur er , i nsul at i on and cover boar d syst em and t hi ckness; pr esence of t aper ed i nsul at i on f or pr i mar y dr ai nage, pr esence of vapor r et ar der ; dat e of compl et i on; i nst al l i ng Cont r act or i dent i f i cat i on and Cont r act i nf or mat i on; membr ane manuf act ur er war r ant y expi r at i on, war r ant y r ef er ence number , and cont act i nf or mat i on. I nst al l car d at syst em access l ocat i on as di r ect ed by t he Cont r act i ng Of f i cer and pr ovi de a paper copy t o t he Cont r act i ng Of f i cer .

SECTI ON 07 14 00 Page 6

FORM 1

FLUI D- APPLI ED WATERPROOFI NG SYSTEM COMPONENTS

1. Cont r act Number

2. Dat e Wor k Compl et ed

3. Pr oj ect Speci f i cat i on Desi gnat i on

4. Subst r at e Mat er i al

5. Sl ope of Subst r at e

6. Dr ai ns Type/ Manuf act ur er

7. Wat er pr oof i ng

a. Membr ane

b. Seal ant

c. El ast omer i c Sheet

d. Mat er i al s Manuf act ur er ( s)

8. Pr ot ect i on Boar d

a. Type

b. Thi ckness

c. Manuf act ur er ' s Name

9. Dr ai nage Cour se Mat er i al Gr aduat i on

10. I nsul at i on

a. Type

b. Thi ckness

c. Manuf act ur er ' s Name

11. Pr ot ect i on Sl ab

a. Mat er i al

b. Thi ckness

c. Suppor t

d. Joi nt Syst em

SECTI ON 07 14 00 Page 7

FORM 1

FLUI D- APPLI ED WATERPROOFI NG SYSTEM COMPONENTS

12. Wear i ng Cour se

a. Type

b. Sl ope

c. Joi nt Syst em

d. Seal ant / Gasket Type

13. Wear i ng Sur f ace Type

Manuf act ur er ' s Name

14. War r ant y

a. Manuf act ur er war r ant y expi r at i on

b. War r ant y r ef er ence number

15. St at ement of Compl i ance or Except i on

Cont r act or ' s Si gnat ur e Dat e Si gned

I nspect or ' s Si gnat ur e Dat e Si gned

- - End of Sect i on - -

SECTI ON 07 14 00 Page 8