DRAFT_DD254.pdf

PDF 395 KB Posted

Attached to
Aerial Target Systems 2 Federal contract opportunity
Solicitation number
w31p4q17r0004
Issued by
Department of the Army Materiel Command Aviation and Missile Life Cycle Management Command

About this file

Attachment 0003 - DRAFT DD254

View the file

Other files for this federal contract opportunity

Other files attached to Aerial Target Systems 2, newest first.
File Type Posted
W31P4Q17R0004-0002.pdf PDF
Attachment_0006_PPQ_Letter_and_Questionnaire_revised.pdf PDF
Attachment_00011_-_ATS2_CLIN_STRUCTURE.pdf PDF
Government_Responses_to_Industry_Questions_(after_Final_RFP).pdf PDF
FINAL_RFP_W31P4Q17R0004-0001_FBO.pdf PDF
FINAL_RFP_ATS2_Attachment_0011_ATS_2_CLIN_Structure_Guide_Revision.pdf PDF
FINAL_RFP_ATS2_ATTACHMENT_0008_Industry_Questions_prior.pdf PDF
FINAL_RFP_Exhibit_A_-_ATS_2_CDRL_R1.pdf PDF
FINAL_RFP_ATS2_Attachment_0002_DSL.pdf PDF
FINAL_RFP_Attachment_0001_SOW_IDIQ_17_AUG.pdf PDF
FINAL_RFP_Attachment_0003_-_ATS2_DD254.pdf PDF
FINAL_RFP_ATS2__ATTACHMENT_0009_Industry_Questions_ID.pdf PDF
FINAL_RFP_ATS2_Attachment_0006_PPQ_Cover_Letter_and_PPQ_.pdf PDF
FINAL_RFP_ATS2__ATTACHMENT_0007_Industry_Questions_from_Draft_RFP.pdf PDF
FINAL_RFP_ATS2_Attachment_0012_Small_Business_Participation_Plan_Evaluation_Form.pdf PDF
FINAL_RFP_ATS2_Attachment_0005_Special_Provisions.pdf PDF
FINAL_RFP_ATS2__ATTACHMENT_0010_Industry_Questions_after_ID._docx.pdf PDF
ATS_Industry_Day_Information.pptx PPTX presentation
DRAFT_ATS2_Industry_Day_Information_Sheet.pptx PPTX presentation
DRAFT_RFP_EXHIBIT_A_CDRLS.pdf PDF
DRAFT_DSL.pdf PDF
DRAFT_SOW.pdf PDF
DRAFT_INDUSTRY_DAY_INFORMATION_SHEET.pptx PPTX presentation
DRAFT_RFP.pdf PDF
Show all 24

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

1. CLEARANCE AND SAFEGUARDING

DEPARTMENT OF DEFENSE a. FACILITY CLEARANCE REQUIRED

CONTRACT SECURITY CLASSIFICATION SPECIFICATION SECRET

{The requirements of the DoD Industrial Security Manual apply

b. LEVEL OF SAFEGUARDING REQUIRED to all security aspects of this effort.)

SECRET

2 . THIS SPECIFICATION IS FOR: (X and complete as applicable) 3. THIS SPECIFICATION IS: (X and complete as applicable)

a. PRIME CONTRACT NUMBER DATE (YYYYMMDD)

a. ORIGINAL (Complete date in all cases)

2016425

b. SUBCONTRACT NUMBER b. REVISED I REVISION NO. DA TE (YYYYMMDD)

(Supersedes all previous specs) c . SOLICITATION OR OTHER NUMBER DUE DA TE (YYYYMMDD) DA TE (YYYYMMDD)

c. FINAL (Complete Item 5 in all cases)

4. IS THIS A FOLLOW-ON CONTRACT? L_j YES ~NO. If Yes , complete the following :

Classified material received or generated under (Preceding Contract Number) is transferred to this follow-on contract.

5 . IS THIS A FINAL DD FORM 254? L_j YES ~NO. If Yes, complete the following :

In response to the contractor 's request dated , retention of the classified material is authorized for the period of

6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

Currently Unassigned TBD DEFENSE SECURITY OFFICE (S211HV) Bldg 3216 Little John Road Redstone Arsenal, AL 35898-7458

7 . SUBCONTRACTOR

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c . COGN IZANT SECURITY OFFICE (Name, Address, and Zip Code)

NIA NIA NIA

8 . ACTUAL PERFORMANCE

a. LOCATION b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

Will be the same as 6a above Same as 6A above

9. GENERAL IDENTIFICATION OF THIS PROCUREMENT

THIS PROCUREMENT PROVIDES FOR THE ACQUISITION OF AERIAL TARGETS, EQUIPMENT, SPARES, OPERATIONAL SERVICES, LOGISTICAL AND ENGINEERING SERVICES.

10. CONTRACTOR WILL REQUIRE ACCESS TO: YES NO 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: YES NO

a. COMMUNICATIONS SECURITY (COMSEC) INFORMATION )( a. ~l(i¥i'l-R'kc-fo~ · ~ UF'.i.'ctams~ ~t.i't~~~~~N¥N}2'TfJ;T~NU I Ht!< )(

b. RESTRICTED DATA )( b. RECEIVE CLASSIFIED DOCUMENTS ONLY )( c . CRITICAL NUCLEAR WEAPON DESIGN INFORMATION )( c . RECEIVE AND GENERATE CLASSIFIED MATERIAL )( d . FORMERLY RESTRICTED DATA )( d . FABRICATE, MODIFY, OR STORE CLASSIFIED HARDWARE )(

e. INTELLIGENCE INFORMATION e. PERFORM SERVICES ONLY )(

(1) Sensitive Compartmented Information (SCI) )( f . HAVE ACCESS TO U.S. CLASSIFIED INFORMATION OUTSIDE THE U.S., )( PUERTO RICO, U.S. POSSESSIONS AND TRUST TERRITORIES

(2) Non-SCI )( g . BE AUTHORIZED TO USE THE SERVICES OF DEFENSE TECHNICAL INFORMATluN

CENTER (DTIC) OR OTHER SECONDARY DISTRIBUTION CENTER )(

f . SPECIAL ACCESS INFORMATION )( h. REQUIRE A COMSEC ACCOUNT )(

g. NATO INFORMATION )( i. HAVE TEMPEST REQU IREMENTS )(

h. FOREIGN GOVERNMENT INFORMATION )( j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS )(

i. LIMITED DISSEMINATION INFORMATION )( k. BE AUTHORIZED TO USE THE DEFENSE COURIER SERVICE )(

j. FOR OFFICIAL USE ONLY INFORMATION )( I. OTHER (Specify} )(

k. OTHER (Specify) )(

Item lOj - see attachment (FOUO Instructions)

DD FORM 254, DEC 1999 PREVIOUS EDITION IS OBSOLETE .

Reset

12. PUBLIC RELEASE. Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the Industrial Security Manual or unless it has been approved for public release by appropriate U.S. Government authority . Proposed public releases shall be submitted for approval prior to release CJ Direct ~ Through (Specify}

TARGETS MANAGEMENT OFFICE

ATTN: SFAE-STRI-ITTS-Q (ERIC HOFFMAN)

BLDG 3211 HERCULES ROAD, REDSTONE ARSENAL, AL 35898-7458

to the Directorate for Freedom of Information and Security Review, Office of the Assistant Secretary of Defense (Public Affairs) * for review.

* In the case of non-DoD User Agencies, requests for disclosure shall be submitted to that agency .

13. SECURITY GUIDANCE. The security classifiection guidance needed for this classified effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes ; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract;

and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended. (Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. Add additional pages as needed to provide complete guidance.)

The contract effort to be performed under this contract normally will not be classified. However, in the performance of this contract, information may need to be released to or generated by the contractor which reveals the performance or specifications of a particular weapon system or target. In addition, information may need to be released to allow the contractor to fabricate, modify, install and store signature modification hardware. Classification of information in this category should be classified in accordance with the particular Security Classification Guide associated with that system.

Item l lc : Information generated under this contract as of the effective date of this revision/new DD254 will be marked in accordance with the source documents and will be marked as follows :

DERIVED FROM: Source Document, multiple sources, or security classification guide, date and POC.

DECLASSIFY ON : Date/event from source document DA TE OF SOURCE: Date of source document or Security Classification Guide Using contractor or activity will furnish complete declassification guidance for the services performed. The highest level of classification for the contract is SECRET.

The contractor shall comply with the provision od DOD 5220.22M National Industrial Security Program Operating Manual

(NISPOM)

The Government Technical Representative and COR for this contract is:

Jim Schwierling, Telephone (256) 876-3451, email: james.e.schwierling.civ@mail.mil PEO STRI, PMITTS, Targets Management Office, Attn: SFAE-STRI-ITTS-Q, Redstone ~al, AL }589~77758 . p ___ PEO STRI, PMITTS, Targets Management Office Lead Project Director: Jim Schwierlin., r- , S: ~ ./

14. ADDITIONAL SECURITY REQUIREMENTS. Requirements, in addition to ISM requirements, are established for this contract . LJ Yes ~ No (If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the cognizant security office. Use Item 13 if additional space is needed.)

15. INSPECTIONS. Elements of this contract are outside the inspection responsibility of the cognizant security office. LJ Yes W No (If Yes, explain and identify specific areas or elements carved out and the activity responsible for inspections. Use Item 13 if additional space is needed.)

16. CERTIFICATION AND SIGNATURE. Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below.

a. TYPED NAME OF CERTIFYING OFFICIAL b. TITLE c . TELEPHONE (Include Area Code)

Eric Hoffman Targets Management Office Security Officer (256) 842-0788

d. ADDRESS (Include Zip Code) 17. REQUIRED DISTRIBUTION ,____ Targets Management Office ~ a . CONTRACTOR

ATTN: SFAE-STRl-ITTS-Q, Bldg 3211 Hercules Road ~ b. SUBCONTRACTOR

1--R_P._.i_s_t_o_n_P._A_rs __ P._.n_~'-1"-. _A'-l __ ._,'-'i'-R_Q--R-----7_4'-'i'-R.;._ ________ _ _ ___ 1---'-"--1 c. COGNI ZANT SECURITY OFFICE FOR PRIME AND SUBCONTRACTOR

e. SIGNflATURE 'U ,,I ~. _ d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY ADMINISTRATION

~ )( e . ADMINISTRATIVE CONTRACTING OFFICER - )C f . OTHERS AS NECESSARY

DD FORM 254 {BACK), DEC 1999

GUIDANCE FOR THE PROTECTION OF

"FOR OFFICIAL USE ONLY" (FOUO) INFORMATION

1. General. The "FOR OFFICIAL USE ONLY" (FOUO) marking is assigned to information at the time of its creation. It is used to designate official government information that may be withheld from the public under exemption 2 through 9 of the Freedom oflnformation Act. Use of the marking does not mean that the information cannot be released to the public, only that it must be reviewed by the government prior to its release to determine whether a significant and legitimate government purpose is served by withholding the information or portions of it.

2. Identification Markings.

a. An unclassified document containing FOUO information will be marked "FOR OFFICIAL USE ONLY" at the bottom of the front cover (if any), on each page containing FOUO information, on the back page, and on the outside of the back cover (if any). No portion markings will be shown.

b. Within a classified document, an individual page that contains both FOUO and classified information will be marked at the top and bottom with the highest security classification of information appearing on the page. If an individual portion contains FOUO information but no classified information, the portion will be marked, FOUO.

c. Any "FOR OFFICIAL USE ONLY" information released is required to be marked with the following statement prior to transfer:

This document contains information EXEMPT FROM MANDATORY DISCLOSURE under FOIA. Exemptions __ apply.

d. Removal of the "FOR OFFICIAL USE ONLY" marking can only be accomplished by the originator or other competent authority . When the "FOR OFFICIAL USE ONLY" status is terminated, all know holders will be notified to the extent possible.

3. Dissemination. "FOR OFFICIAL USE ONLY" information may be disseminated by contractors to their employees and subcontractors who have a need for the information in connection with a classified contract.

4. Storage. During working hours, "FOR OFFICIAL USE ONLY" information shall be placed in an out-of-sight location ifthe work area is accessible to persons who do not have a need for the information.

During nonworking hours, the information shall be stored to preclude unauthorized access . Filing such material with other unclassified record in unlocked files or desks, is adequate when internal building security is provided during nonworking hours. When such internal security control is not exercised, locked buildings or rooms will provide adequate after-hours protection or the material can be stored in locked receptacles such as file cabinets, desks, or bookcases.

5. Transmission. "FOR OFFICIAL USE ONLY" information may be sent via first-class mail or parcel post. Bulky shipments may be sent by fourth-class mail.

6. Disposition. When no longer needed, FOUO information may be disposed of by tearing each copy into pieces to preclude reconstructing and placing it in a regular trash container.

7. Unauthorized disclosure of"FOR OFFICIAL USE ONLY" does not constitute a security violation but the contracting officer should be informed of any unauthorized disclosure. The unauthorized disclosure of FOUO information protected by the Privacy Act may result in criminal sanctions.

File details come from the government source that posted it. Updated .