EXHIBIT_15_Contractor_Provided_Communication_Equipment.pdf

Exhibit 15

CONTRACTOR FURNISHED COMMUNICATION

EQUIPMENT REQUIREMENTS

1. Facilities: ANDOVER, MA: COVINGTON, KY: MEMPHIS, TN LOCATIONS

2. Equipment: The Contractor will provide as a minimum each security post with one (1) communication device. This device must be capable of communicating with the Contracting Officer's Representative (COR), Security Quality Inspector (SQI), local rescue and law enforcement as well as the contractor’s supervisory officials. Sites with two or more officers require communication devices with the ability to communicate with all other security units.

Each unit must be equipped with a detachable microphone and earpiece. The contractor will advise the government of the equipment to be used and issuances in the start up transition paperwork.

Note: Government telephones (hard line) should not be considered as part of the contractor communications plan.

3. Licenses and Frequencies: The Contractor will apply for an FCC license and authorization to operate in frequencies specified by the Government. Where necessary, the Contracting Officer or his authorized Representative will issue a letter of authorization, identifying the Contractor as having a need to communicate over a frequency or frequencies assigned to an agency of the Federal Government.

4. Normal, Emergency and Continuous Communications: All two-way portable radio units must have the capability of transmitting and receiving clear and concise vocal transmissions on 2 channels between the security units, and be compatible with the base station and repeater frequencies.

5. The Contractor will provide a listing of radio(s) and associated equipment to be used on this Contract to the local designated Security Quality Inspector (SQI) and Contracting Officer's Representative