TE J DID A008 Government Furnised Property Contractor Acquired Property Master Report.pdf
PDF 259 KB Posted
- Attached to
- Base Test Support Services
- Solicitation number
- BTSS2026
About this file
This document is a Data Item Description (DID) for a Government Property Equipment (GFE) and Contractor Acquired Property (CAP) Master Report. The form prescribes minimum requirements for contractors to prepare a multi-part electronic report using Microsoft Excel, with separate tabs for Government Furnished Equipment (GFE) and Contractor Acquired Property (CAP). The Master Report must include detailed data elements such as part number, description, national stock number, quantity, unit acquisition cost, serial number, location, disposition, and supply condition code.
The report applies to all government property accountability, including property provided to the contractor, property found on installation during the contract year, and bench stock inventory. The document specifies that abbreviations are not allowed, and the report must provide comprehensive tracking of government property across different classifications like equipment, material, special test equipment, and special tooling. The form is approved by the U.S. Army Operations Test Command (USAOTC) G4 and carries a distribution statement allowing public release with unlimited distribution.
View the file
Other files
Show all 17
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Form Approved OMB No. 0704-0188
Page 1 of 1 Pages PREVIOUS EDITION MAY BE USED.DD FORM 1664, AUG 96 (EG)
DATA ITEM DESCRIPTION
1. TITLE
A008, Government Property Equipment (GFE) and Contractor Acquired Property (GFE and CAP) Master Report
2. IDENTIFICATION NUMBER
3. DESCRIPTION/PURPOSE
To prescribe minimum requirements for contractor prepared maintenance, operator, and software user manuals.
4. APPROVAL DATE
(YYYYMMDD)
5. OFFICE OF PRIMARY RESPONSIBILITY (OPR) 6a. DTIC APPLICABLE 6b. GIDEP APPLICABLE
7. APPLICATION/INTERRELATIONSHIP
This Data Item Description (DID) is applicable to all accountability as GFE provided to the contractor. This includes CAP, property Found on Installation (FOI) during the contract year, and Bench Stock.
8. APPROVAL LIMITATION 9a. APPLICABLE FORMS 9b. AMSC NUMBER
11. DISTRIBUTION STATEMENT
Distribution Statement A: Approved for public release; distribution is unlimited.
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS.
Downloaded from http://www.everyspec.com
USAOTC G4
10. PREPARATION INSTRUCTIONS
10.1. Master Report (MR) will be a multi-part report that includes discernible sections for the two Government Property types: Government Furnished Equipment (GFE) and Contractor Acquired Property (CAP). Each type of Government Property (i.e. GFE and CAP) section shall be further detailed by Government Property classification (i.e. Equipment, Material, Special Test Equipment and Special Tooling). The MR shall be delivered electronically in a spreadsheet using Microsoft Office Excel. Abbreviations are not allowed. Separate tabs within the excel spreadsheet shall be utilized; one tab will be used to report GF and one tab will be used to report CAP. The Contractor shall also provide a Bench Stock Inventory as well.
10.2. The MR shall consist of the following data elements at a minimum: Name, Part Number, Description (including manufacturer and Model Number, if assigned), National Stock Number (additional cataloging may be required), Quantity received (or fabricated), issued, and balance-on-hand, Unit Acquisition Cost, Unique-item identifier or equivalent (serial number), Unit of Measure, Accountable Contract Number, Location, Disposition, Posting reference and date of transaction, Date placed in service, Government Property Type: GFE or CAP, Classification of Government Property (i.e. Equipment, Material, Special Test Equipment, Special Tooling), and Supply Condition Code (See DoD 4000.25-2-M AP2.5).
XXXX - Must add the PIEE process and use of the GFE Module.
File details come from the government source that posted it. Updated .