TE 11- Division 26 - Electrical.pdf

SECTI ON 26 56 00

EXTERI OR LI GHTI NG

05/13

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o i n t he t ext by t he basi c desi gnat i on onl y.

AMERI CAN ASSOCI ATI ON OF STATE HI GHWAY AND TRANSPORTATI ON OFFI CI ALS

(AASHTO)

AASHTO LTS ( 2013; Er r at a 2013) St andar d Speci f i cat i ons f or St r uct ur al Suppor t s f or Hi ghway Si gns, Lumi nai r es and Tr af f i c Signals

AMERI CAN SOCI ETY OF HEATI NG, REFRI GERATI NG AND AI R- CONDI TI ONI NG

ENGI NEERS ( ASHRAE)

ASHRAE 90. 1 - I P ( 2013) Ener gy St andar d f or Bui l di ngs Except Low- Ri se Resi dent i al Bui l di ngs

ASTM I NTERNATI ONAL ( ASTM)

ASTM A123/ A123M ( 2017) St andar d Speci f i cat i on f or Zi nc ( Hot - Di p Gal vani zed) Coat i ngs on I r on and St eel Pr oduct s

ASTM A153/ A153M ( 2016) St andar d Speci f i cat i on f or Zi nc Coat i ng ( Hot - Di p) on I r on and St eel Hardware

ASTM B117 ( 2016) St andar d Pr act i ce f or Oper at i ng Sal t Spr ay ( Fog) Appar at us

I LLUMI NATI NG ENGI NEERI NG SOCI ETY ( I ES)

I ES HB- 10 ( 2011; Er r at a 2015) I ES Li ght i ng Handbook

I ES LM- 79 ( 2008) El ect r i cal and Phot omet r i c Measur ement s of Sol i d- St at e Li ght i ng Products

I ES LM- 80 ( 2015) Measur i ng Lumen Mai nt enance of LED Li ght Sour ces

I ES RP- 8 ( 2018) Recommended Pr act i ce f or Li ght i ng Roadway and Par k i ng Faci l i t i es

I ES RP- 16 ( 2017) Nomencl at ur e and Def i ni t i ons f or I l l umi nat i ng Engi neer i ng

I ES TM- 15 ( 2011) Lumi nai r e Cl assi f i cat i on Syst em f or

SECTI ON 26 56 00 Page 1

Out door Lumi nai r es

I ES TM- 21 ( 2011; Addendum B 2015) Pr oj ect i ng Long Ter m Lumen Mai nt enance of LED Li ght Sour ces

I NSTI TUTE OF ELECTRI CAL AND ELECTRONI CS ENGI NEERS ( I EEE)

I EEE 100 ( 2000; Ar chi ved) The Aut hor i t at i ve Di ct i onar y of I EEE St andar ds Ter ms

I EEE C2 ( 2017; Er r at a 1- 2 2017; I NT 1 2017) Nat i onal El ect r i cal Saf et y Code

I EEE C62. 41. 2 ( 2002) Recommended Pr act i ce on Char act er i zat i on of Sur ges i n Low- Vol t age ( 1000 V and Less) AC Power Ci r cui t s

NATI ONAL ELECTRI CAL MANUFACTURERS ASSOCI ATI ON ( NEMA)

ANSI C136. 3 ( 2014) Amer i can Nat i onal St andar d f or Roadway and Ar ea Li ght i ng Equi pment Lumi nai r e At t achment s

ANSI C136. 13 ( 2014) Roadway and Ar ea Li ght i ng Equi pment

- Met al Br acket s f or Wood Pol es

ANSI C136. 21 ( 2014) Amer i can Nat i onal St andar d f or Roadway and Ar ea Li ght i ng Equi pment - Ver t i cal Tenons Used wi t h Post - Top- Mount ed Luminaires

NEMA 250 ( 2018) Encl osur es f or El ect r i cal Equi pment ( 1000 Vol t s Maxi mum)

NEMA ANSLG C78. 377 ( 2017) El ect r i c Lamps— Speci f i cat i ons f or t he Chr omat i c i t y of Sol i d St at e Li ght i ng Products

NEMA C82. 77 ( 2002) Har moni c Emi ssi on Li mi t s - Rel at ed Power Qual i t y Requi r ement s f or Li ght i ng Equipment

NEMA C136. 31 ( 2018) Roadway and Ar ea Li ght i ng Equi pment

- Lumi nai r e Vi br at i on

NEMA I CS 2 ( 2000; R 2005; Er r at a 2008) I ndust r i al Cont r ol and Syst ems Cont r ol l er s, Cont act or s, and Over l oad Rel ays Rat ed 600 V

NEMA I CS 6 ( 1993; R 2016) I ndust r i al Cont r ol and Syst ems: Encl osur es

NEMA I EC 60529 ( 2004) Degr ees of Pr ot ect i on Pr ovi ded by Encl osur es ( I P Code)

NEMA WD 7 ( 2011; R 2016) Occupancy Mot i on Sensor s Standard

SECTI ON 26 56 00 Page 2

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 70 ( 2017; ERTA 1- 2 2017; TI A 17- 1; TI A 17- 2;

TI A 17- 3; TI A 17- 4; TI A 17- 5; TI A 17- 6;

TI A 17- 7; TI A 17- 8; TI A 17- 9; TI A 17- 10;

TI A 17- 11; TI A 17- 12; TI A 17- 13; TI A

17- 14; TI A 17- 15; TI A 17- 16; TI A 17- 17 )

Nat i onal El ect r i cal Code

U. S. DEPARTMENT OF ENERGY ( DOE)

Ener gy St ar ( 1992; R 2006) Ener gy St ar Ener gy Ef f i c i ency Label i ng Syst em ( FEMP)

U. S. NATI ONAL ARCHI VES AND RECORDS ADMI NI STRATI ON ( NARA)

47 CFR 15 Radi o Fr equency Devi ces

UNDERWRI TERS LABORATORI ES ( UL)

UL 773 ( 2016; Repr i nt Nov 2017) UL St andar d f or Saf et y Pl ug- I n, Locki ng Type Phot ocont r ol s f or Use wi t h Ar ea Li ght i ng

UL 773A ( 2016; Repr i nt May 2018) UL St andar d f or Saf et y Noni ndust r i al Phot oel ect r i c Swi t ches f or Li ght i ng Cont r ol

UL 916 ( 2015) St andar d f or Ener gy Management Equipment

UL 1310 ( 2018) UL St andar d f or Saf et y Cl ass 2 Power Uni t s

UL 1598 ( 2008; Repr i nt Oct 2012) Lumi nai r es

UL 8750 ( 2015; Repr i nt Aug 2018) UL St andar d f or Saf et y Li ght Emi t t i ng Di ode ( LED) Equi pment f or Use i n Li ght i ng Pr oduct s

1. 2 RELATED REQUI REMENTS

Mat er i al s not consi der ed t o be l umi nai r es or l i ght i ng equi pment ar e speci f i ed i n Sect i on( s) 33 71 02 UNDERGROUND ELECTRI CAL DI STRI BUTI ON .

Lumi nai r es and accessor i es i nst al l ed i n i nt er i or of bui l di ngs ar e not r el evant t o t hi s pr oj ect .

1. 3 DEFINITIONS

a. Unl ess ot her wi se speci f i ed or i ndi cat ed, el ect r i cal and el ect r oni cs t er ms used i n t hese speci f i cat i ons, and on t he dr awi ngs shal l be as def i ned i n I EEE 100 and I ES RP- 16.

c. For LED l umi nai r e l i ght sour ces, " Usef ul Li f e" i s t he oper at i ng hour s bef or e r eachi ng 70 per cent of t he i ni t i al r at ed l umen out put ( L70) wi t h no cat ast r ophi c f ai l ur es under nor mal oper at i ng condi t i ons. Thi s i s al so known as 70 per cent " Rat ed Lumen Mai nt enance Li f e" as def i ned i n

I ES LM- 80.

SECTI ON 26 56 00 Page 3

1. 4 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or i nf or mat i on onl y. When used, a desi gnat i on f ol l owi ng t he " G" desi gnat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . Submi t t al s wi t h an " S" ar e f or i ncl usi on i n t he Sust ai nabi l i t y eNot ebook, i n conf or mance wi t h Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG. Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL PROCEDURES:

SD- 01 Pr econst r uct i on Submi t t al s

Phot omet r i c Pl an; G

LED Lumi nai r e War r ant y; G

SD- 02 Shop Dr awi ngs

Lumi nai r e Dr awi ngs; G

Pol es; G

SD- 03 Pr oduct Dat a

Ener gy St ar Label f or LED Lumi nai r e Pr oduct ; S

Lumi nai r e Li ght Sour ces; G

Lumi nai r e Power Suppl y Uni t s ( Dr i ver s) ; G

Li ght i ng Cont act or ; G

Ti me Swi t ch; G

Li ght i ng Cont r ol Rel ay Panel ; G

Mot i on Sensor ; G

Phot ocel l ; G

Concr et e Pol es; G

Al umi num Pol es; G

St eel Pol es; G

Brackets

Obst r uct i on Mar ker Lumi nai r es; G

SD- 04 Sampl es

SECTI ON 26 56 00 Page 4

LED, Lumi nai r es; G

Submi t one sampl e of each l umi nai r e t ype, compl et e wi t h l i ght sour ce and bal l ast , gener at or or power suppl y uni t . Submi t one sampl e f or each i t em ot her t han l umi nai r es. Sampl e wi l l be r et ur ned t o t he Cont r act or f or i nst al l at i on i n t he pr oj ect wor k.

SD- 05 Desi gn Dat a

Desi gn Dat a f or Lumi nai r es; G

SD- 06 Test Repor t s

LED Lumi nai r e - I ES LM- 79 Test Repor t ; G

LED Li ght Sour ce - I ES LM- 80 Test Repor t ; GOper at i ng Test

Submi t oper at i ng t est r esul t s as st at ed i n par agr aph ent i t l ed " Fi el d Qual i t y Cont r ol . "

SD- 07 Cer t i f i cat es

Lumi nai r e Usef ul Li f e Cer t i f i cat e; G

Submi t cer t i f i cat i on f r om t he manuf act ur er i ndi cat i ng t he expect ed usef ul l i f e of t he l umi nai r es pr ovi ded. The usef ul l i f e shal l be di r ect l y cor r el at ed f r om t he I ES LM- 80 t est dat a usi ng pr ocedur es out l i ned i n I ES TM- 21. Ther mal pr oper t i es of t he speci f i c l umi nai r e and l ocal ambi ent oper at i ng t emper at ur e and condi t i ons shal l be t aken i nt o consi der at i on.

SD- 08 Manuf act ur er ' s I nst r uct i ons

Concr et e Pol es

Submi t i nst r uct i ons pr i or t o i nst al l at i on.

Fi ber gl ass Pol es

Submi t i nst r uct i ons pr i or t o i nst al l at i on.

SD- 10 Oper at i on and Mai nt enance Dat a

El ect r oni c Bal l ast War r ant y

Oper at i onal Ser v i ce

Submi t document at i on t hat i ncl udes cont act i nf or mat i on, summar y of pr ocedur es, and t he l i mi t at i ons and condi t i ons appl i cabl e t o t he pr oj ect . I ndi cat e manuf act ur er ' s commi t ment t o r ecl ai m mat er i al s f or r ecycl i ng and/ or r euse.

1. 5 QUALI TY ASSURANCE

1. 5. 1 Dr awi ng Requi r ement s

1. 5. 1. 1 Lumi nai r e Dr awi ngs

I ncl ude di mensi ons, ef f ect i ve pr oj ect ed ar ea ( EPA) , accessor i es, and

SECTI ON 26 56 00 Page 5 i nst al l at i on and const r uct i on det ai l s . Phot omet r i c dat a, i ncl udi ng zonal l umen dat a, aver age and mi ni mum r at i o, ai mi ng di agr am, and comput er i zed candl epower di st r i but i on dat a shal l accompany shop dr awi ngs.

1. 5. 1. 2 Poles

I ncl ude di mensi ons, wi nd l oad det er mi ned i n accor dance wi t h AASHTO LTS, pol e def l ect i on, pol e c l ass, and ot her appl i cabl e i nf or mat i on.

1. 5. 2 Phot omet r i c Pl an

For LED and al l ot her t ypes of l umi nai r es, t he submi t t al shal l i ncl ude t he following:

Hor i zont al i l l umi nance measur ement s at f i ni shed gr ade, t aken at a maxi mum of ever y 10 f eet .

Ver t i cal i l l umi nance measur ement s at 5 f eet above f i ni shed gr ade.

Mi ni mum and maxi mum f oot candl e l evel s.

Aver age mai nt ai ned f oot candl e l evel .

Maxi mum t o mi ni mum r at i o f or hor i zont al i l l umi nance onl y.

1. 5. 3 Desi gn Dat a f or Lumi nai r es

a. Pr ovi de di st r i but i on dat a accor di ng t o I ES cl assi f i cat i on t ype as def i ned i n I ES HB- 10.

b. Shi el di ng as def i ned by I ES RP- 8 or B. U. G. r at i ng f or t he i nst al l ed posi t i on as def i ned by I ES TM- 15.

c. Pr ovi de saf et y cer t i f i cat i on and f i l e number f or t he l umi nai r e f ami l y.

I ncl ude l i s t i ng, l abel i ng and i dent i f i cat i on per NFPA 70 ( NEC) .

Appl i cabl e t est i ng bodi es ar e det er mi ned by t he US Occupat i onal Saf et y Heal t h Admi ni st r at i on ( OSHA) as Nat i onal l y Recogni zed Test i ng Labor at or i es ( NRTL) and i ncl ude: CSA ( Canadi an St andar ds Associ at i on) , ETL ( Edi son Test i ng Labor at or y) , and UL ( Under wr i t er s Labor at or i es) .

d. Pr ovi de l ong t er m l umen mai nt enance pr oj ect i ons f or each LED l umi nai r e i n accor dance wi t h I ES TM- 21. Dat a used f or pr oj ect i ons shal l be obt ai ned f r om t est i ng i n accor dance wi t h I ES LM- 80.

e. Pr ovi de wi nd l oadi ng cal cul at i ons f or l umi nai r es mount ed on pol es.

Wei ght and ef f ect i ve pr oj ect ed ar ea ( EPA) of l umi nai r es and mount i ng br acket s shal l not exceed maxi mum r at i ng of pol e as i nst al l ed i n par t i cul ar wi nd zone ar ea.

1. 5. 4 LED Lumi nai r e - I ES LM- 79 Test Repor t

Submi t t est r epor t on manuf act ur er ' s st andar d pr oduct i on model l umi nai r e.

Submi t t al shal l i ncl ude al l phot omet r i c and el ect r i cal measur ement s, as wel l as al l ot her per t i nent dat a out l i ned under " 14. 0 Test Repor t " i n

I ES LM- 79.

1. 5. 5 LED Li ght Sour ce - I ES LM- 80 Test Repor t

Submi t r epor t on manuf act ur er ' s st andar d pr oduct i on LED package, ar r ay, or

SECTI ON 26 56 00 Page 6 modul e. Submi t t al shal l i ncl ude:

a. Test i ng agency, r epor t number , dat e, t ype of equi pment , and LED l i ght sour ce bei ng t est ed.

b. Al l dat a r equi r ed by I ES LM- 80.

1. 5. 5. 1 Test Labor at or i es

Test l abor at or i es f or t he I ES LM- 79 and I ES LM- 80 t est r epor t s shal l be one of t he f ol l owi ng:

a. Nat i onal Vol unt ar y Labor at or y Accr edi t at i on Pr ogr am ( NVLAP) accr edi t ed f or sol i d- st at e l i ght i ng t est i ng as par t of t he Ener gy- Ef f i c i ent Li ght i ng Pr oduct s l abor at or y accr edi t at i on pr ogr am.

b. One of t he qual i f i ed l abs l i s t ed on t he Depar t ment of Ener gy - Ener gy Ef f i c i ency & Renewabl e Ener gy, Sol i d- St at e Li ght i ng web si t e.

c. A manuf act ur er ' s i n- house l ab t hat meet s t he f ol l owi ng cr i t er i a:

1. Manuf act ur er has been r egul ar l y engaged i n t he desi gn and pr oduct i on of hi gh i nt ensi t y di schar ge r oadway and ar ea l umi nai r es and t he manuf act ur er ' s l ab has been successf ul l y cer t i f y i ng t hese f i x t ur es f or a mi ni mum of 15 year s.

2. Annual equi pment cal i br at i on i ncl udi ng phot omet er cal i br at i on i n accor dance wi t h Nat i onal I nst i t ut e of St andar ds and Technol ogy.

1. 5. 6 Regul at or y Requi r ement s

I n each of t he publ i cat i ons r ef er r ed t o her ei n, consi der t he advi sor y pr ovi s i ons t o be mandat or y, as t hough t he wor d, " shal l " had been subst i t ut ed f or " shoul d" wher ever i t appear s. I nt er pr et r ef er ences i n t hese publ i cat i ons t o t he " aut hor i t y havi ng j ur i sdi ct i on, " or wor ds of s i mi l ar meani ng, t o mean t he Cont r act i ng Of f i cer . Equi pment , mat er i al s, i nst al l at i on, and wor kmanshi p shal l be i n accor dance wi t h t he mandat or y and advi sor y pr ovi s i ons of NFPA 70 unl ess mor e st r i ngent r equi r ement s ar e speci f i ed or i ndi cat ed.

1. 5. 7 St andar d Pr oduct s

Pr ovi de mat er i al s and equi pment t hat ar e pr oduct s of manuf act ur er s r egul ar l y engaged i n t he pr oduct i on of such pr oduct s whi ch ar e of equal mat er i al , desi gn and wor kmanshi p. Pr oduct s shal l have been i n sat i sf act or y commer ci al or i ndust r i al use f or 2 year s pr i or t o bi d openi ng. The 2- year per i od shal l i nc l ude appl i cat i ons of equi pment and mat er i al s under s i mi l ar c i r cumst ances and of s i mi l ar s i ze. The pr oduct shal l have been on sal e on t he commer ci al mar ket t hr ough adver t i sement s, manuf act ur er s ' cat al ogs, or br ochur es dur i ng t he 2- year per i od. Wher e t wo or mor e i t ems of t he same cl ass of equi pment ar e r equi r ed, t hese i t ems shal l be pr oduct s of a s i ngl e manuf act ur er ; however , t he component par t s of t he i t em need not be t he pr oduct s of t he same manuf act ur er unl ess st at ed i n t hi s sect i on.

1. 5. 7. 1 Al t er nat i ve Qual i f i cat i ons

Pr oduct s havi ng l ess t han a 2- year f i el d ser vi ce r ecor d wi l l be accept abl e i f t he manuf act ur er has been r egul ar l y engaged i n t he desi gn and pr oduct i on of hi gh i nt ensi t y di schar ge r oadway and ar ea l umi nai r es f or a mi ni mum of 15

SECTI ON 26 56 00 Page 7 year s. Pr oduct s shal l have been i n sat i sf act or y commer ci al or i ndust r i al use f or 15 year s pr i or t o bi d openi ng. The pr oduct shal l have been on sal e on t he commer ci al mar ket t hr ough adver t i sement s, manuf act ur er s ' cat al ogs, or br ochur es dur i ng t he 15- year per i od.

1. 5. 7. 2 Mat er i al and Equi pment Manuf act ur i ng Dat e

Pr oduct s manuf act ur ed mor e t han 1 year pr i or t o dat e of del i ver y t o s i t e shal l not be used, unl ess speci f i ed ot her wi se.

1. 6 WARRANTY

The equi pment i t ems shal l be suppor t ed by ser vi ce or gani zat i ons whi ch ar e r easonabl y conveni ent t o t he equi pment i nst al l at i on i n or der t o r ender sat i sf act or y ser vi ce t o t he equi pment on a r egul ar and emer gency basi s dur i ng t he war r ant y per i od of t he cont r act .

1. 6. 1 LED Lumi nai r e War r ant y

Pr ovi de Lumi nai r e Usef ul Li f e Cer t i f i cat e.

The equi pment i t ems shal l be suppor t ed by ser vi ce or gani zat i ons whi ch ar e r easonabl y conveni ent t o t he equi pment i nst al l at i on i n or der t o r ender sat i sf act or y ser vi ce t o t he equi pment on a r egul ar and emer gency basi s dur i ng t he war r ant y per i od of t he cont r act .

a. Pr ovi de a wr i t t en f i ve year on- si t e r epl acement war r ant y f or mat er i al , f i x t ur e f i ni sh, and wor kmanshi p. On- si t e r epl acement i ncl udes t r anspor t at i on, r emoval , and i nst al l at i on of new pr oduct s.

1. Fi ni sh war r ant y shal l i ncl ude war r ant y agai nst f ai l ur e and agai nst subst ant i al det er i or at i on such as bl i s t er i ng, cr acki ng, peel i ng, chal k i ng, or f adi ng.

2. Mat er i al war r ant y shal l i ncl ude:

( a) Al l power suppl y uni t s ( dr i ver s) .

( b) Repl acement when mor e t han 10 per cent of LED sour ces i n any l i ght bar or subassembl y( s) ar e def ect i ve or non- st ar t i ng.

b. War r ant y per i od must begi n on dat e of benef i c i al occupancy. Cont r act or shal l pr ovi de t he Cont r act i ng Of f i cer s i gned war r ant y cer t i f i cat es pr i or t o f i nal payment .

1. 6. 2 El ect r oni c Bal l ast War r ant y

Fur ni sh t he el ect r oni c bal l ast s manuf act ur er ' s war r ant y. The war r ant y per i od shal l not be l ess t han f i ve ( 5) year s f r om t he dat e of manuf act ur e.

Bal l ast assembl y i n t he l i ght i ng f i x t ur e, t r anspor t at i on, and on- si t e st or age shal l not exceed t wel ve ( 12) mont hs, t her eby per mi t t i ng f our ( 4) year s of t he f i ve ( 5) year war r ant y t o be i n ser vi ce and ener gi zed. The war r ant y shal l s t at e t hat t he mal f unct i oni ng bal l ast shal l be exchanged by t he manuf act ur er and pr ompt l y shi pped t o t he usi ng Gover nment f aci l i t y .

The r epl acement bal l ast shal l be i dent i cal t o, or an i mpr ovement upon, t he or i gi nal desi gn of t he mal f unct i oni ng bal l ast .

SECTI ON 26 56 00 Page 8

1. 7 OPERATI ONAL SERVI CE

Coor di nat e wi t h manuf act ur er f or mai nt enance agr eement . Col l ect i nf or mat i on f r om t he manuf act ur er about mai nt enance agr eement opt i ons, and submi t t o Cont r act i ng Of f i cer . Ser vi ces shal l r ec l ai m mat er i al s f or r ecycl i ng and/ or r euse. Ser vi ces shal l not deposi t mat er i al s i n l andf i l l s or bur n r ecl ai med mat er i al s. I ndi cat e pr ocedur es f or compl i ance wi t h r egul at i ons gover ni ng di sposal of mer cur y. When such a ser vi ce i s not avai l abl e, l ocal r ecycl er s shal l be sought af t er t o r ecl ai m t he mat er i al s.

PART 2 PRODUCTS

2. 1 LED, LUMI NAI RES

UL 1598, NEMA C82. 77 and UL 8750. Pr ovi de l umi nai r es as i ndi cat ed i n l umi nai r e schedul e and XL pl at es or det ai l s on pr oj ect pl ans. Pr ovi de l umi nai r es compl et e wi t h l i ght sour ces of quant i t y , t ype, and wat t age i ndi cat ed. Al l l umi nai r es of t he same t ype shal l be pr ovi ded by t he same manuf act ur er . Pr ovi de Ener gy St ar l abel ed LED l umi nai r e pr oduct . Pr ovi de pr oof of Ener gy St ar l abel f or LED l umi nai r e pr oduct .

2. 1. 1 Gener al Requi r ement s

a. LED l umi nai r e housi ngs shal l be di e cast or ext r uded al umi num.

b. LED l umi nai r es shal l be r at ed f or oper at i on wi t hi n an ambi ent t emper at ur e r ange of mi nus 22 degr ees F t o 122 degr ees F.

c. Lumi nai r es shal l be UL l i s t ed f or wet l ocat i ons per UL 1598. Opt i cal compar t ment f or LED l umi nai r es shal l be seal ed and r at ed a mi ni mum of I P65 per NEMA I EC 60529.

d. LED l umi nai r es shal l pr oduce a mi ni mum ef f i cacy as shown i n t he f ol l owi ng t abl e, t est ed per I ES LM- 79. Theor et i cal model s of i ni t i al r aw LED l umens per wat t ar e not accept abl e.

Application Lumi nai r e Ef f i cacy i n Lumens per Wat t

Ext er i or Pol e/ Ar m- Mount ed Ar ea and Roadway Luminaires

Ext er i or Pol e/ Ar m- Mount ed Decor at i ve Luminaires

Ext er i or Wal l - Mount ed Ar ea Lumi nai r es 102

Bollards 45

Par ki ng Gar age Lumi nai r es 106

e. Lumi nai r es shal l have I ES di st r i but i on and NEMA f i el d angl e c l assi f i cat i ons as i ndi cat ed i n l umi nai r e schedul e on pr oj ect pl ans per

I ES HB- 10.

f . Housi ng f i ni sh shal l be baked- on enamel , anodi zed, or baked- on powder coat pai nt . Fi ni sh shal l be capabl e of sur vi v i ng ASTM B117 sal t f og

SECTI ON 26 56 00 Page 9 envi r onment t est i ng f or 2500 hour s mi ni mum wi t hout bl i s t er i ng or peeling.

g. Lumi nai r es shal l not exceed t he f ol l owi ng I ES TM- 15 Backl i ght , Upl i ght and Gl ar e ( B. U. G. ) r at i ngs:

1. Maxi mum Backl i ght ( B) r at i ng shal l be det er mi ned by l i ght i ng zone i n whi ch l umi nai r e i s pl aced.

2. Maxi mum Upl i ght ( U) r at i ng shal l be U0.

3. Maxi mum Gl ar e ( G) r at i ng shal l be det er mi ned by l i ght i ng zone i n whi ch l umi nai r e i s pl aced.

h. Lumi nai r es shal l be f ul l y assembl ed and el ect r i cal l y t est ed pr i or t o shi pment f r om f act or y.

i . The f i ni sh col or shal l be as i ndi cat ed i n t he l umi nai r e schedul e or det ai l on t he pr oj ect pl ans.

j . Lumi nai r e ar m bol t s shal l be 304 st ai nl ess st eel or z i nc- pl at ed st eel .

k. Lumi nai r e l enses shal l be const r uct ed of c l ear t emper ed gl ass or UV- r esi st ant acr yl i c . Pr ovi de pol ycar bonat e vandal - r esi st ant l enses as indicated.

l . The wi r i ng compar t ment on pol e- mount ed, st r eet and ar ea l umi nai r es must be accessi bl e wi t hout t he use of hand t ool s t o mani pul at e smal l scr ews, bol t s, or har dwar e.

m. I ncor por at e modul ar el ect r i cal connect i ons, and const r uct l umi nai r es t o al l ow r epl acement of al l or any par t of t he opt i cs, heat s i nks, power suppl y uni t s, bal l ast s, sur ge suppr essor s and ot her el ect r i cal component s usi ng onl y a s i mpl e t ool , such as a manual or cor dl ess el ect r i c scr ewdr i ver .

n. Lumi nai r es shal l have a namepl at e bear i ng t he manuf act ur er ' s name, addr ess, model number , dat e of manuf act ur e, and ser i al number secur el y af f i xed i n a conspi cuous pl ace. The namepl at e of t he di st r i but i ng agent wi l l not be accept abl e.

o. Roadway and ar ea l umi nai r es shal l have an i nt egr al t i l t adj ust ment of pl us or mi nus 5 degr ees t o al l ow t he uni t t o be l evel ed i n accor dance with ANSI C136. 3.

p. Lumi nai r e must pass 3G vi br at i on t est i ng i n accor dance wi t h NEMA C136. 31.

q. Al l f act or y el ect r i cal connect i ons shal l be made usi ng cr i mp, l ocki ng, or l at chi ng st y l e connect or s. Twi st - st y l e wi r e nut s ar e not accept abl e.

2. 1. 2 Lumi nai r e Li ght Sour ces

2. 1. 2. 1 LED Li ght Sour ces

a. Cor r el at ed Col or Temper at ur e ( CCT) shal l be i n accor dance wi t h

NEMA ANSLG C78. 377:

SECTI ON 26 56 00 Page 10

Nomi nal CCT: 4000 degr ees K: 3985 pl us or mi nus 275 degr ees K

b. Col or Render i ng I ndex ( CRI ) shal l be:

Gr eat er t han or equal t o 70 f or 4000 degr ees K l i ght sour ces.

c. Col or Consi st ency:

Manuf act ur er shal l ut i l i ze a maxi mum 4- st ep MacAdam el l i pse bi nni ng t ol er ance f or col or consi st ency of LEDs used i n l umi nai r es.

2. 1. 3 Lumi nai r e Power Suppl y Uni t s ( Dr i ver s)

2. 1. 3. 1 LED Power Suppl y Uni t s ( Dr i ver s)

UL 1310. LED Power Suppl y Uni t s ( Dr i ver s) shal l meet t he f ol l owi ng requirements:

a. Mi ni mum ef f i c i ency shal l be 85 per cent .

b. Dr i ve cur r ent t o each i ndi v i dual LED shal l not exceed 600 mA, pl us or mi nus 10 per cent .

c. Shal l be r at ed t o oper at e bet ween ambi ent t emper at ur es of mi nus 22 degr ees F and 104 degr ees F.

d. Shal l be desi gned t o oper at e on t he vol t age syst em t o whi ch t hey ar e connect ed, t ypi cal l y r angi ng f r om 120 V t o 480 V nomi nal .

e. Oper at i ng f r equency shal l be: 50 or 60 Hz.

f . Power Fact or ( PF) shal l be gr eat er t han or equal t o 0. 90.

g. Tot al Har moni c Di st or t i on ( THD) cur r ent shal l be l ess t han or equal t o 20 per cent .

h. Shal l meet r equi r ement s of 47 CFR 15, Cl ass B.

i . Shal l be RoHS- compl i ant .

j . Shal l be mount ed i nt egr al t o l umi nai r e. Remot e mount i ng of power suppl y i s not al l owed.

k. Power suppl i es i n l umi nai r es mount ed under a cover ed st r uct ur e, such as a canopy, or wher e ot her wi se appr opr i at e shal l be UL l i s t ed wi t h a sound r at i ng of A.

l . Shal l be di mmabl e, and compat i bl e wi t h a st andar d di mmi ng cont r ol c i r cui t of 0 - 10V or ot her appr oved di mmi ng syst em.

m. Shal l be equi pped wi t h over - t emper at ur e pr ot ect i on c i r cui t t hat t ur ns l i ght sour ce of f unt i l nor mal oper at i ng t emper at ur e i s achi eved.

2. 1. 4 LED Lumi nai r e Sur ge Pr ot ect i on

Pr ovi de sur ge pr ot ect i on i nt egr al t o l umi nai r e t o meet C Low wavef or ms as def i ned by I EEE C62. 41. 2, Scenar i o 1, Locat i on Cat egor y C.

SECTI ON 26 56 00 Page 11

2. 2 OBSTRUCTI ON MARKER LUMI NAI RES

Pr ovi de obst r uct i on mar ker l umi nai r es f or f aci l i t i es as r equi r ed by t he FAA and i n accor dance wi t h Sect i on 26 56 20 AI RFI ELD AND HELI PORT LI GHTI NG AND

VI SUAL NAVI GATI ON AI DS.

2. 3 EXTERI OR LUMI NAI RE CONTROLS

Cont r ol s shal l compl y wi t h Sect i on 9 of ASHRAE 90. 1 - I P . Pr ovi de a cont r ol syst em i nt er f ace wi t hi n each l umi nai r e t hat i s compat i bl e wi t h t he ener gy management or cont r ol syst em used by t he ut i l i t y depar t ment i n char ge of t he pr oj ect ar ea f or cont r ol of s i t e l i ght i ng.

2. 3. 1 Photocell

UL 773 or UL 773A. Phot ocel l s shal l be her met i cal l y seal ed, s i l i con di ode l i ght sensor t ype, r at ed at 3000 wat t s, 277 vol t s, 50/ 60 Hz wi t h s i ngl e- pol e, s i ngl e- t hr ow cont act s. Phot ocel l shal l be desi gned t o f ai l t o t he ON posi t i on. Housi ng shal l be const r uct ed of pol ycar bonat e , r at ed t o oper at e wi t hi n a t emper at ur e r ange of mi nus 40 t o 158 degr ees F. Phot ocel l shal l have a 1/ 2 i n t hr eaded base f or mount i ng t o a j unct i on box or condui t . Pr ovi de f i xed base t ype housi ng. Phot ocel l shal l t ur n on at 1- 3 f oot candl es and t ur n of f at 3 t o 15 f oot candl es. A t i me del ay shal l pr event acci dent al swi t chi ng f r om t r ansi ent l i ght sour ces. Pr ovi de a di r ect i onal l ens i n f r ont of t he cel l t o pr event f i xed l i ght sour ces f r om cr eat i ng a t ur nof f condi t i on.

2. 3. 2 Timeswitch

Ti meswi t ch shal l be an el ect r oni c t ype wi t h a 7 day pr ogr ammi ng f unct i on t hat changes on/ of f set t i ngs accor di ng t o seasonal var i at i ons of sunset and sunr i se, pr ovi di ng a t ot al of 56 on/ of f set poi nt s. Di gi t al c l ock di spl ay f or mat shal l be24 hour t ype. Pr ovi de power out age backup f or swi t ch ut i l i z i ng a al kal i ne bat t er i es whi ch pr ovi des cover age f or a mi ni mum of 7 days. Ti meswi t ch shal l pr ovi de cont r ol t o 2 channel s or l oads. Cont act s shal l be r at ed f or 30 amps at 120- 277 VAC r esi st i ve l oad i n a SPST conf i gur at i on. Pr ovi de swi t ch wi t h f unct i on t hat al l ows aut omat i c cont r ol t o be ski pped on cer t ai n sel ect ed days of t he weekdayl i ght savi ngs t i me aut omat i c adj ust ment abi l i t y f or phot osensor i nput .

Ti meswi t ch shal l be housed i n a sur f ace- mount ed, l ockabl e NEMA 3R encl osur e const r uct ed of pai nt ed st eel or pl ast i c pol ymer conf or mi ng t o NEMA I CS 6.

2. 3. 3 Li ght i ng Cont act or

NEMA I CS 2. Pr ovi de a el ect r i cal l y- hel d l i ght i ng cont act or housed i n a NEMA 3R encl osur e conf or mi ng t o NEMA I CS 6. Cont act or shal l have 4 pol es, conf i gur ed as nor mal l y open ( NO) . Cont act s shal l be r at ed 600 vol t s, 30 amper es f or a r esi st i ve l oad. Coi l oper at i ng vol t age shal l be 277 vol t s.

Cont act or shal l have s i l ver cadmi um oxi de doubl e- br eak cont act s and coi l c l ear i ng cont act s f or mechani cal l y hel d cont act or s and shal l r equi r e no ar ci ng cont act s. Pr ovi de cont act or wi t h hand- of f - aut omat i c on- of f sel ect or swi t ch.

2. 3. 4 Li ght i ng Cont r ol Rel ay Panel

Panel shal l consi st of a s i ngl e NEMA 3R - mount ed encl osur e wi t h t wo

SECTI ON 26 56 00 Page 12 separ at e i nt er i or sect i ons; one f or Cl ass 1 ( br anch ci r cui t ) and one f or Cl ass 2 ( l ow vol t age) wi r i ng. Pr ovi de panel wi t h 16 r el ays. Panel shal l be desi gned as an aut omat ed cont r ol syst em i nt er f ace t ype. The Cl ass 1 sect i on shal l cont ai n t he l oad s i de of al l r el ays and t he i ncomi ng br anch ci r cui t wi r i ng. The Cl ass 2 sect i on shal l cont ai n t he cont r ol power t r ansf or mer ( 24 vol t out put ) , r el ays, r el ay cont r ol modul es, and cont r ol wi r i ng, and nat i ve BACnet f i el d- pr ogr ammabl e appl i cat i on cont r ol l er f or panel s connect ed t o t he f aci l i t y aut omat ed cont r ol syst em. Panel encl osur e shal l be const r uct ed of 16 gauge col d- r ol l ed st eel wi t h baked- on enamel f i ni sh. Panel shal l meet r equi r ement s of UL 916, ASHRAE 90. 1 - I P, and

47 CFR 15.

Rel ays shal l be 1- pol e, r at ed at 20 amper es 300 VAC wi t h r at ed l i f e of 120, 000 mechani cal oper at i ons mi ni mum.

Rel ay cont r ol modul e shal l be 24 vol t , el ect r oni c t ype and cont r ol up t o 16 separ at e r el ays ( 16 channel ) or pr ogr ammed gr oups of r el ays. Pr ovi de wi t h i nput s f or s i gnal s f r om devi ces such as phot ocel l s , t i mecl ocks, and mot i on sensor s. Rel ay cont r ol modul e wi t h i nt egr al t i mecl ock f unct i on shal l be 24 vol t , el ect r oni c t ype wi t h LCD di spl ay and cont r ol up t o 8 separ at e r el ays ( 8 channel ) .

2. 3. 5 Mot i on Sensor

NEMA WD 7, UL 773A. Pr ovi de dual t echnol ogy passi ve i nf r ar ed/ mi cr owave t ype sensor s wi t h 270 degr ee cover age, t i me del ay t hat can be adj ust ed f r om 15 seconds t o 15 mi nut es, and " f ai l t o ON posi t i on" def aul t st at e. Sensor s shal l be l ocat ed t o achi eve cover age of ar eas as i ndi cat ed on pr oj ect pl ans. Cover age pat t er ns shal l be der at ed as r ecommended by manuf act ur er based on mount i ng hei ght of sensor and any obst r uct i ons such as t r ees. Do not use gr oss r at ed cover age i n manuf act ur er ' s pr oduct l i t er at ur e. Sensor s i nst al l ed i nt egr al t o t he l umi nai r e must be pr ovi ded by t he l umi nai r e manuf act ur er . Sensor s shal l have an i nt egr al l i ght l evel sensor t hat does not al l ow l umi nai r es t o oper at e dur i ng dayl i ght hour s and shal l be desi gned t o oper at e on a vol t age of 120/ 277 VAC. Pr ovi de sensor s t o oper at e i n conj unct i on wi t h bi - l evel cont r ol l er s t hat l ower HI D or LED l umi nai r es t o a 50 per cent out put . Sensor shal l be mount ed di r ect l y t o l umi nai r e.

2. 4 POLES

Pr ovi de pol es desi gned f or wi nd l oadi ng of 100 mi l es per hour det er mi ned i n accor dance wi t h AASHTO LTS whi l e suppor t i ng l umi nai r es and al l ot her appur t enances i ndi cat ed. The ef f ect i ve pr oj ect ed ar eas of l umi nai r es and appur t enances used i n cal cul at i ons shal l be speci f i c f or t he act ual pr oduct s pr ovi ded on each pol e. Pol es shal l be embedded- base t ype desi gned f or use wi t h under gr ound suppl y conduct or s. Pol es shal l have oval - shaped handhol e havi ng a mi ni mum cl ear openi ng of 2. 5 by 5 i nches. Handhol e cover shal l be secur ed by st ai nl ess st eel capt i ve scr ews. Met al pol es shal l have an i nt er nal gr oundi ng connect i on accessi bl e f r om t he handhol e near t he bot t om of each pol e. Scr at ched, st ai ned, chi pped, or dent ed pol es shal l not be i nst al l ed.

2. 4. 1 St eel Pol es

AASHTO LTS. Pr ovi de st eel pol es havi ng mi ni mum 11- gage st eel wi t h mi ni mum yi el d/ st r engt h of 48, 000 psi and hot - di pped gal vani zed i n accor dance wi t h ASTM A123/ A123M f act or y f i ni sh. Pr ovi de a pol e gr oundi ng connect i on desi gned t o pr event el ect r ol ysi s when used wi t h copper gr ound wi r e. Pol e shal l be di r ect set t ype. Pol es shal l have t aper ed t ubul ar member s, ei t her

SECTI ON 26 56 00 Page 13 r ound i n cr oss sect i on or pol ygonal . Pol e shaf t s shal l be one pi ece.

Pol es shal l be wel ded const r uct i on wi t h no bol t s, r i vet s, or ot her means of f ast eni ng except as speci f i cal l y appr oved. Pol e mar ki ngs shal l be appr oxi mat el y 3 t o 4 f eet above gr ade and shal l i ncl ude manuf act ur er , year of manuf act ur e, t op and bot t om di amet er s, and l engt h. Base cover s f or st eel pol es shal l be st r uct ur al qual i t y hot - r ol l ed car bon st eel pl at e havi ng a mi ni mum yi el d of 36, 000 psi .

2. 5 BRACKETS AND SUPPORTS

ANSI C136. 3, ANSI C136. 13, and ANSI C136. 21, as appl i cabl e. Pol e br acket s shal l be not l ess t han 1 1/ 4 i nch gal vani zed st eel pi pe secur ed t o pol e.

Sl i p- f i t t er or pi pe- t hr eaded br acket s may be used, but br acket s shal l be coor di nat ed t o l umi nai r es pr ovi ded, and br acket s f or use wi t h one t ype of l umi nai r e shal l be i dent i cal . Br acket s f or pol e- mount ed st r eet l i ght s shal l cor r ect l y posi t i on l umi nai r e no l ower t han mount i ng hei ght i ndi cat ed. Mount br acket s not l ess t han 24 f eet above st r eet . Speci al mount i ngs or br acket s shal l be as i ndi cat ed and shal l be of met al whi ch wi l l not pr omot e gal vani c r eact i on wi t h l umi nai r e head.

2. 6 POLE FOUNDATI ONS

Anchor bol t s shal l be st eel r od havi ng a mi ni mum yi el d st r engt h of 50, 000 psi ; t he t op 12 i nches of t he r od shal l be gal vani zed i n accor dance wi t h ASTM A153/ A153M. Concr et e shal l be as speci f i ed i n Sect i on 03 30 00

CAST- I N- PLACE CONCRETE.

2. 7 EQUI PMENT I DENTI FI CATI ON

2. 7. 1 Manuf act ur er ' s Namepl at e

Each i t em of equi pment shal l have a namepl at e bear i ng t he manuf act ur er ' s name, addr ess, model number , and ser i al number secur el y af f i xed i n a conspi cuous pl ace; t he namepl at e of t he di st r i but i ng agent wi l l not be acceptable.

2. 7. 2 Labels

Pr ovi de l abel ed l umi nai r es i n accor dance wi t h UL 1598 r equi r ement s.

Lumi nai r es shal l be c l ear l y mar ked f or oper at i on of speci f i c l i ght sour ces and bal l ast s accor di ng t o pr oper l i ght sour ce t ype. The f ol l owi ng l i ght sour ce char act er i st i cs shal l be not ed i n t he f or mat " Use Onl y _____" :

a. Li ght sour ce t ube di amet er code ( e. g. T- 5, T- 8) , t ube quant i t y conf i gur at i on ( e. g. t wi n, quad, t r i pl e) , base t ype ( e. g. G24q- 2, GX 24 q- 4) , and nomi nal wat t age f or f l uor escent and compact f l uor escent luminaires.

b. Li ght sour ce t ype, wat t age, bul b t ype ( e. g. ED17, BD56) and coat i ng ( c l ear or coat ed) f or HI D l umi nai r es.

c. St ar t t ype ( e. g. pr ogr ammed- st ar t , r api d- st ar t , i nst ant - st ar t ) f or f l uor escent and compact f l uor escent l umi nai r es.

d. ANSI bal l ast t ype ( e. g. M98, M57) f or HI D l umi nai r es.

e. Cor r el at ed col or t emper at ur e ( CCT) and col or r ender i ng i ndex ( CRI ) f or al l l umi nai r es.

SECTI ON 26 56 00 Page 14

Mar ki ngs r el at ed t o l amp t ype shal l be c l ear and l ocat ed t o be r eadi l y v i s i bl e t o ser vi ce per sonnel , but unseen f r om nor mal v i ewi ng angl es when l amps ar e i n pl ace.

2. 8 FACTORY APPLI ED FI NI SH

El ect r i cal equi pment shal l have f act or y- appl i ed pai nt i ng syst ems whi ch shal l , as a mi ni mum, meet t he r equi r ement s of NEMA 250 cor r osi on- r esi st ance test.

PART 3 EXECUTI ON

3. 1 INSTALLATION

El ect r i cal i nst al l at i ons shal l conf or m t o I EEE C2, NFPA 70, and t o t he r equi r ement s speci f i ed her ei n.

3. 1. 1 St eel Pol es

Pr ovi de pol e f oundat i ons wi t h gal vani zed st eel anchor bol t s, t hr eaded at t he t op end and bent 90 degr ees at t he bot t om end. Pr ovi de or nament al cover s t o mat ch pol e and gal vani zed nut s and washer s f or anchor bol t s.

Concr et e f or anchor bases, pol yvi nyl chl or i de ( PVC) condui t el l s , and gr ound r ods shal l be as speci f i ed i n Sect i on 33 71 02 UNDERGROUND ELECTRI CAL DI STRI BUTI ON. Thor oughl y compact backf i l l wi t h compact i ng ar r anged t o pr event pr essur e bet ween conduct or , j acket , or sheat h and t he end of condui t el l . Adj ust pol es as necessar y t o pr ovi de a per manent ver t i cal posi t i on wi t h t he br acket ar m i n pr oper posi t i on f or l umi nai r e location.

3. 1. 2 Pol e Set t i ng

Pol es i n st r ai ght r uns shal l be i n a st r ai ght l i ne. Di g hol es l ar ge enough t o per mi t t he pr oper use of t amper s t o t he f ul l dept h of t he hol e. Pl ace backf i l l i n t he hol e i n 6 i nch maxi mum l ayer s and t hor oughl y t amp. Pl ace sur pl us ear t h ar ound t he pol e i n a coni cal shape and pack t i ght l y t o dr ai n wat er away.

3. 1. 3 Phot ocel l Swi t ch Ai mi ng

Ai m swi t ch accor di ng t o manuf act ur er ' s r ecommendat i ons. Mount swi t ch on or besi de each l umi nai r e when swi t ch i s pr ovi ded i n cast weat her pr oof al umi num housi ng wi t h swi vel ar m.

3. 1. 4 GROUNDING

Gr ound noncur r ent - car r y i ng par t s of equi pment i ncl udi ng met al pol es, l umi nai r es, mount i ng ar ms, br acket s, and met al l i c encl osur es as speci f i ed i n Sect i on 33 71 02 UNDERGROUND ELECTRI CAL DI STRI BUTI ON. Wher e copper gr oundi ng conduct or i s connect ed t o a met al ot her t han copper , pr ovi de speci al l y t r eat ed or l i ned connect or s sui t abl e f or t hi s pur pose.

3. 1. 5 FI ELD APPLI ED PAI NTI NG

Pai nt el ect r i cal equi pment as r equi r ed t o mat ch f i ni sh of adj acent sur f aces or t o meet t he i ndi cat ed or speci f i ed saf et y cr i t er i a. Pai nt i ng shal l be

SECTI ON 26 56 00 Page 15 as speci f i ed i n Sect i on 09 90 00 PAI NTS AND COATI NGS.

3. 2 FI ELD QUALI TY CONTROL

Upon compl et i on of i nst al l at i on, ver i f y t hat equi pment i s pr oper l y i nst al l ed, connect ed, and adj ust ed. Conduct an oper at i ng t est af t er 100 hour s of bur n- i n t i me t o show t hat t he equi pment oper at es i n accor dance wi t h t he r equi r ement s of t hi s sect i on.

- - End of Sect i on - -

SECTI ON 26 56 00 Page 16

SECTI ON 26 56 13. 00 40

LI GHTI NG POLES AND STANDARDS

11/14

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

AMERI CAN ASSOCI ATI ON OF STATE HI GHWAY AND TRANSPORTATI ON OFFI CI ALS

(AASHTO)

AASHTO LTS ( 2013; Er r at a 2013) St andar d Speci f i cat i ons f or St r uct ur al Suppor t s f or Hi ghway Si gns, Lumi nai r es and Tr af f i c Signals

ASTM I NTERNATI ONAL ( ASTM)

ASTM A36/ A36M ( 2014) St andar d Speci f i cat i on f or Car bon St r uct ur al St eel

ASTM A153/ A153M ( 2016) St andar d Speci f i cat i on f or Zi nc Coat i ng ( Hot - Di p) on I r on and St eel Hardware

ASTM A575 ( 1996; E 2013; R 2013) St andar d Speci f i cat i on f or St eel Bar s, Car bon, Mer chant Qual i t y , M- Gr ades

ASTM A576 ( 2017) St andar d Speci f i cat i on f or St eel Bar s, Car bon, Hot - Wr ought , Speci al Qual i t y

I LLUMI NATI NG ENGI NEERI NG SOCI ETY ( I ES)

I ES HB- 10 ( 2011; Er r at a 2015) I ES Li ght i ng Handbook

I NSTI TUTE OF ELECTRI CAL AND ELECTRONI CS ENGI NEERS ( I EEE)

I EEE 81 ( 2012) Gui de f or Measur i ng Ear t h Resi st i v i t y, Gr ound I mpedance, and Ear t h Sur f ace Pot ent i al s of a Gr ound Syst em

I EEE C2 ( 2017; Er r at a 1- 2 2017; I NT 1 2017) Nat i onal El ect r i cal Saf et y Code

I EEE C135. 1 ( 1999) St andar d f or Zi nc- Coat ed St eel Bol t s and Nut s f or Over head Li ne Construction

I EEE St ds Di ct i onar y ( 2009) I EEE St andar ds Di ct i onar y: Gl ossar y of Ter ms & Def i ni t i ons

SECTI ON 26 56 13. 00 40 Page 1

NATI ONAL ELECTRI CAL MANUFACTURERS ASSOCI ATI ON ( NEMA)

ANSI C136. 3 ( 2014) Amer i can Nat i onal St andar d f or Roadway and Ar ea Li ght i ng Equi pment Lumi nai r e At t achment s

ANSI C136. 13 ( 2014) Roadway and Ar ea Li ght i ng Equi pment

- Met al Br acket s f or Wood Pol es

ANSI C136. 21 ( 2014) Amer i can Nat i onal St andar d f or Roadway and Ar ea Li ght i ng Equi pment - Ver t i cal Tenons Used wi t h Post - Top- Mount ed Luminaires

NEMA C136. 20 ( 2012) Amer i can Nat i onal St andar d f or Roadway and Ar ea Li ght i ng Equi pment - Fi ber Rei nf or ced Composi t e ( FRC) Li ght i ng Poles

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 70 ( 2017; ERTA 1- 2 2017; TI A 17- 1; TI A 17- 2;

TI A 17- 3; TI A 17- 4; TI A 17- 5; TI A 17- 6;

TI A 17- 7; TI A 17- 8; TI A 17- 9; TI A 17- 10;

TI A 17- 11; TI A 17- 12; TI A 17- 13; TI A

17- 14; TI A 17- 15; TI A 17- 16; TI A 17- 17 )

Nat i onal El ect r i cal Code

SOCI ETY FOR PROTECTI VE COATI NGS ( SSPC)

SSPC SP 10/ NACE No. 2 ( 2007) Near - Whi t e Bl ast Cl eani ng

U. S. GENERAL SERVI CES ADMI NI STRATI ON ( GSA)

FS TT- P- 38 ( Rev E; Not i ce 1) Pai nt , Al umi num, Ready-Mixed

FS TT- P- 645 ( Rev C) Pr i mer , Pai nt , Zi nc- Mol ybdat e, Al kyd Type

UNDERWRI TERS LABORATORI ES ( UL)

UL 467 ( 2013; Repr i nt Jun 2017) UL St andar d f or Saf et y Gr oundi ng and Bondi ng Equi pment

1. 2 DEFINITIONS

Gr oundl i ne sect i on i s t hat por t i on bet ween one f oot above and 2 f eet bel ow t he gr oundl i ne. Ref er t o I EEE St ds Di ct i onar y f or addi t i onal r el at ed def i ni t i ons and t er mi nol ogy.

1. 3 ADMI NI STRATI VE REQUI REMENTS

1. 3. 1 Sust ai nabl e Desi gn Requi r ement s

Use mat er i al s or pr oduct s ext r act ed, har vest ed, or r ecover ed, as wel l as manuf act ur ed, wi t hi n a 500 mi l e r adi us f r om t he pr oj ect s i t e, i f avai l abl e f r om a mi ni mum of t hr ee sour ces.

SECTI ON 26 56 13. 00 40 Page 2

Submi t document at i on i ndi cat i ng di st ance bet ween manuf act ur i ng f aci l i t y and t he pr oj ect s i t e. I ndi cat e di st ance of r aw mat er i al or i gi n f r om t he pr oj ect s i t e. I ndi cat e r el at i ve dol l ar val ue of l ocal / r egi onal mat er i al s t o t ot al dol l ar val ue of pr oduct s i ncl uded i n pr oj ect .

a. Local / Regi onal Mat er i al s

b. Sust ai nabl e acqui s i t i on

c. Envi r onment al Dat a

Submi t document at i on t hat i ncl udes cont act i nf or mat i on, summar y of pr ocedur es, and t he l i mi t at i ons and condi t i ons appl i cabl e t o t he pr oj ect .

I ndi cat e manuf act ur er ' s commi t ment t o r ecl ai m mat er i al s f or r ecycl i ng and/ or r euse.

a. Oper at i onal Ser vi ce

Coor di nat e wi t h manuf act ur er f or mai nt enance agr eement . Col l ect i nf or mat i on f r om t he manuf act ur er about mai nt enance agr eement opt i ons, and submi t t o t he Cont r act i ng Of f i cer . Mai nt enance agr eement f or ser vi ces t o r ecl ai m mat er i al s f or r ecycl i ng and/ or r euse may not be used f or l andf i l l or bur ned. I ndi cat e pr ocedur es f or compl i ance wi t h r egul at i ons gover ni ng di sposal of mer cur y. When such a ser vi ce i s not avai l abl e, seek l ocal r ecycl er s t o r ecl ai m t he mat er i al s.

1. 3. 2 Pr e- I nst al l at i on Meet i ngs

Wi t hi n 30 cal endar days af t er dat e of awar d , submi t f or t he appr oval of t he Cont r act i ng Of f i cer s i x ( 6) copi es of speci f i ed dr awi ngs of al l equi pment t o be f ur ni shed under t hi s cont r act , t oget her wi t h wei ght s and over al l di mensi ons. Submi t t he f ol l owi ng dat a and dr awi ngs:

a. Pol es

b. I nst al l at i on det ai l s

e. St eel pol es

h. Br acket s i . Anchor age syst ems

Af t er submi t t al s ar e r ecei ved and appr oved t he Cont r act i ng Of f i cer wi l l hol d a pr e- wor k conf er ence t o r evi ew t he f ol l owi ng:

a. The dr awi ngs, i ncl udi ng pol es, showi ng compl et e I nst al l at i on Det ai l s , and speci f i cat i ons. I ncl ude det ai l s f or t he f ol l owi ng f or r evi ew:

( 1) Foundat i on r equi r ement s ( 2) Anchor age syst ems ( 3) Manuf act ur er ' s cat al og dat a i ncl udi ng mount i ng and br acket det ai l s ( 4) Fact or y col or f i ni sh

b. Fi nal i ze const r uct i on schedul e and ver i f y avai l abi l i t y of mat er i al s, I nst al l er ' s per sonnel , equi pment , and f aci l i t i es needed t o make pr ogr ess and avoi d del ays.

c. Met hods and pr ocedur es r el at ed t o pol e and l umi nai r e i nst al l at i on, SECTI ON 26 56 13. 00 40 Page 3 i nc l udi ng manuf act ur er ' s wr i t t en i nst r uct i ons and ver i f i cat i on of pol e syst em assembl y wi nd l oad c l assi f i cat i on l i s t i ngs.

d. Gover ni ng r egul at i ons and r equi r ement s f or i nsur ance, cer t i f i cat es, t est s and i nspect i ons i f appl i cabl e. I ncl ude cer t i f i cat i on f or sust ai nabl e acqui s i t i on and pol e syst em assembl y wi nd l oad r at i ng c l assi f i cat i on. Saf et y pl an r evi ew i ncl udes appl i cabl e Saf et y Dat a Sheets.

e. Tempor ar y pr ot ect i on r equi r ement s f or pol e assembl y dur i ng and af t er installation.

f . Pol e syst em obser vat i on and r epai r pr ocedur es af t er compl et e i nst al l at i on. I ncl ude r evi ew of sampl e Al umi ni zed St eel Repai r Pai nt .

g. Sampl e War r ant y.

1. 4 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or Cont r act or Qual i t y Cont r ol appr oval . Submi t t al s wi t h an " S" ar e f or i ncl usi on i n t he Sust ai nabi l i t y eNot ebook, i n conf or mance t o Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG.

Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL

PROCEDURES:

SD- 02 Shop Dr awi ngs

Pol es; G

I nst al l at i on Det ai l s ; G

SD- 03 Pr oduct Dat a

Local / Regi onal Mat er i al s; G

St eel Pol es; G

Br acket s; G

Anchor age Syst ems; G

SD- 05 Desi gn Dat a; G

Li ght i ng St andar ds; G

Soi l Test s; G

Sei smi c Desi gn Dat a; G

Manuf act ur er ' s Cat al og Dat a; G

Manuf act ur er ' s Col or Char t s and Chi ps; G

Saf et y Dat a Sheet s; G

SECTI ON 26 56 13. 00 40 Page 4

SD- 07 Cer t i f i cat es

Sust ai nabl e Acqui s i t i on; G

SD- 08 Manuf act ur er ' s I nst r uct i ons

Foundat i on Requi r ement s; G

Mount i ng Det ai l s ; G

SD- 10 Oper at i on and Mai nt enance Dat a

Oper at i onal Ser v i ce; G

SD- 11 Cl oseout Submi t t al s

War r ant y; G

Recor d Dr awi ngs; G

1. 5 QUALI TY CONTROL

1. 5. 1 Dr awi ng Requi r ement s

1. 5. 1. 1 Poles

I ncl ude di mensi ons, wi nd l oad det er mi ned i n accor dance wi t h AASHTO LTS, pol e def l ect i on, pol e c l ass, and ot her appl i cabl e i nf or mat i on conf or mi ng t o I ES HB- 10. Submi t soi l t est s t o t he Cont r act i ng Of f i cer pr i or t o t he commencement of wor k

1. 5. 2 Regul at or y Requi r ement s

I n each of t he publ i cat i ons r ef er r ed t o her ei n, consi der t he advi sor y pr ovi s i ons t o be mandat or y, f or " shoul d" wher ever i t appear s. I nt er pr et r ef er ences i n t hese publ i cat i ons t o t he " aut hor i t y havi ng j ur i sdi ct i on, " or wor ds of s i mi l ar meani ng, t o mean t he Cont r act i ng Of f i cer . Pr ovi de equi pment , mat er i al s, i nst al l at i on, and wor kmanshi p i n accor dance wi t h t he mandat or y and advi sor y pr ovi s i ons of NFPA 70 unl ess mor e st r i ngent r equi r ement s ar e speci f i ed or i ndi cat ed.

1. 5. 3 Al t er nat i ve Qual i f i cat i ons

Pr oduct s havi ng l ess t han a 2- year f i el d ser vi ce r ecor d wi l l be accept abl e i f a cer t i f i ed r ecor d of sat i sf act or y f i el d oper at i on f or not l ess t han 6000 hour s, excl usi ve of t he manuf act ur er s ' f act or y or l abor at or y t est s, i s furnished.

1. 5. 3. 1 Mat er i al and Equi pment Manuf act ur i ng Dat e

Pr oduct s manuf act ur ed mor e t han 3 year s pr i or t o dat e of del i ver y t o s i t e ar e not al l owed, unl ess speci f i ed ot her wi se.

1. 5. 4 Manuf act ur er ' s Col or Char t s and Chi ps

Submi t manuf act ur er ' s col or char t s and chi ps, appr oxi mat el y 4 by 4 i nches, showi ng f ul l r ange of col or s, t ext ur es and pat t er ns avai l abl e f or al umi num pol es wi t h f act or y appl i ed f i ni shes.

SECTI ON 26 56 13. 00 40 Page 5

1. 6 DELI VERY, STORAGE, AND HANDLI NG

Del i ver , st or e, and handl e pol es, and al l r el at ed accessor i es and ot her manuf act ur ed i t ems i n a manner t o pr event damage or def or mat i on.

1. 6. 1 St eel Pol es

Do not st or e pol es on gr ound. Suppor t pol es so t hey ar e at l east one f oot above gr ound l evel and gr owi ng veget at i on. Do not r emove f act or y- appl i ed pol e wr appi ngs unt i l j ust bef or e i nst al l i ng pol e.

1. 7 WARRANTY

Pr ovi de suppor t f or t he equi pment i t ems by ser vi ce or gani zat i ons whi ch ar e r easonabl y conveni ent t o t he equi pment i nst al l at i on i n or der t o r ender sat i sf act or y ser vi ce t o t he equi pment on a r egul ar and emer gency basi s dur i ng t he war r ant y per i od of t he cont r act .

PART 2 PRODUCTS

2. 1 SYSTEM DESCRI PTI ON

Pr ovi de mat er i al s and equi pment t hat ar e pr oduct s of manuf act ur er s r egul ar l y engaged i n t he pr oduct i on of such pr oduct s whi ch ar e of equal mat er i al , desi gn and wor kmanshi p, whi ch have been i n sat i sf act or y commer ci al or i ndust r i al use f or 2 year s pr i or t o bi d openi ng under s i mi l ar c i r cumst ances and of s i mi l ar s i ze, and have been on sal e on t he commer ci al mar ket t hr ough adver t i sement s, manuf act ur er s ' cat al ogs, or br ochur es dur i ng t he 2- year per i od.