15R0012-0001.pdf

DLA MARITIME NORFOLK

KASIE H. ANTHONY

CODE NMAB.3A

(757)396-8023/FAX 396-8017

PORTSMOUTH VA 23709-5000

N421584351JITP

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

I. Solicitatoin SPMYM1-15-R-0012 has been extended. The hour and date for receipt of offer is July 27, 2015 at 10:00AM EST.

II. Other amendments are noted on the attached Changes Page sheet. Utilize the attached updated f inal items list spreadsheet dtd 07_01_15 for entering prices and comments.

1. CONTRACT ID CODE PAGE OF PAGES

K 1 53

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 02-Jul-2015

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X SPMYM1-15-R-0012

X 9B. DATED (SEE ITEM 11)

25-Jun-2015

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

02-Jul-2015

CODE

DLA MARITIME NORFOLK

CONTRACTING DIVISION

BLDG 1500-2 CODE NMAB

PORTSMOUTH VA 23709

SPMYM1 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE SPMYM1

FACILITY CODECODE

EMAIL:TEL:

SPMYM1-15-R-0012

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The standard size code 500 has been added.

The required response date/time has changed from 13-Jul-2015 10:00 AM to 27-Jul-2015 10:00 AM.

SUPPLIES OR SERVICES AND PRICES

SUBCLIN 0003AG

The CLIN extended description has changed from RFW AND PW TANK COATING/SPECIALTY

COATING 2 GALLON KITFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH: MIL-DTL-

24441/23A OR 23B, TYPE III AX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH:

SEMI-GLOSS to RFW AND PW TANK COATING/SPECIALTY COATING 2 GALLON KITFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH: MIL-DTL-24441/23A OR 23B, TYPE III AX VOC: 340 g/LCOLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS.

SUBCLIN 0003AQ

The CLIN extended description has changed from GEN PURPOSE AC EPOXY 10 GALLON KITFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH: MIL-DTL-2444132A OR 32B, TYPE IV MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to GEN

PURPOSE AC EPOXY 10 GALLON KITFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH:

MIL-DTL-2444132A OR 32B, TYPE IV MAX VOC: 340 g/LCOLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS.

SUBCLIN 0003AR

The CLIN extended description has changed from GEN PURPOSE AC EPOXY 20 OUNCE CARTRIDGEFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH: MIL-DTL-2444132A OR 32B, TYPE IV MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to GEN

PURPOSE AC EPOXY 20 OUNCE CARTRIDGEFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE

WITH: MIL-DTL-2444132A OR 32B, TYPE IV MAX VOC: 340 g/LCOLOR: BLACK RO. 1.8, FINISH: SEMI-

GLOSS.

SUBCLIN 0005AA

The CLIN extended description has changed from SPECIAL HULL TREATMENT (SHT)

CAMOUFLAGE/NON-SKID COATINGS 2 GALLON KITFORMULA 184, EPOXY, RO 1.8 IN

ACCORDANCE WITH: MIL-DTL-24631/1C (SH), TYPE I MAX VOC: 340 g/LFED-STD-595B: 27038COLOR:

BLACK, FINISH: SEMI-GLOSS to SPECIAL HULL TREATMENT (SHT) CAMOUFLAGE/NON-SKID COATINGS2 GALLON KITFORMULA 184, EPOXY, IN ACCORDANCE WITH: MIL-DTL-24631/1C (SH), TYPE I MAX VOC: 340 g/LCOLOR: BLACK RW 1.8, FINISH: SEMI-GLOSS.

SUBCLIN 0005AC

CAMOUFLAGE COATINGS1.25 GALLON KITFORMULA 187 POLYESTER URETHANE IN

ACCORDANCE WITH: MIL-DTL-24631/7 (SH) MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK, FINISH: SEMI-GLOSS to SPECIAL HULL TREATMENT (SHT) CAMOUFLAGE COATINGS1.25 GALLON

KITFORMULA 187 POLYESTER URETHANE IN ACCORDANCE WITH: MIL-DTL-24631/7 (SH) MAX

VOC: 340 g/LCOLOR: BLACK RW 1.8, FINISH: SEMI-GLOSS.

SUBCLIN 0005AD

CAMOUFLAGE COATINGS1.25 QUART KITFORMULA 187 POLYESTER URETHANE IN ACCORDANCE

WITH: MIL-DTL-24631/7 (SH) MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK, FINISH: SEMI- GLOSS to SPECIAL HULL TREATMENT (SHT) CAMOUFLAGE COATINGS1.25 QUART KITFORMULA

187 POLYESTER URETHANE IN ACCORDANCE WITH: MIL-DTL-24631/7 (SH) MAX VOC: 340

g/LCOLOR: BLACK RW 1.8, FINISH: SEMI-GLOSS.

SUBCLIN 0006AG

The CLIN extended description has changed from FW AND PW TK SPECIALTY COATING 5 GALLON KITEPOXY FOR TEMPS ABOVE 50°F IN ACCORDANCE WITH: MIL-PRF-23236D, TYPE VII, CLASS 9, GRADE C MAX VOC: 150 g/LCOLOR: LIGHT GRAY to FW AND PW TK SPECIALTY COATING 5 GALLON KIT0 EPOXY FOR TEMPS ABOVE 50°F IN ACCORDANCE WITH: MIL-PRF-23236D, TYPE VII, CLASS 7/9, GRADE C MAX VOC: 150 g/LCOLOR: LIGHT GRAY.

SUBCLIN 0006AK

The CLIN extended description has changed from FW AND PW TK SPECIALTY COATING 13 OUNCE CARTRIDGEEPOXY FOR TEMPS ABOVE 50°F IN ACCORDANCE WITH: MIL-PRF-23236D, TYPE VII, CLASS 9, GRADE C MAX VOC: 150 g/LCOLOR: LIGHT GRAY to FW AND PW TK SPECIALTY COATING 13 OUNCE CARTRIDGEEPOXY FOR TEMPS ABOVE 50°F IN ACCORDANCE WITH: MIL-PRF- 23236D, TYPE VII, CLASS 7/9, GRADE C MAX VOC: 150 g/LCOLOR: LIGHT GRAY.

SUBCLIN 0006CH

The CLIN extended description has changed from GEN PURPOSE EPOXY POWDER COATING 50 LB

BXEPOXY HIGH TEMP POWDER COATING IN ACCORDANCE WITH: MIL-PRF-23236D, TYPE VIII,

CLASS 7, GRADE D MAX VOC: 75 g/LFED-STD-595B: 24585COLOR: PASTEL GEEN, FINISH: SEMI- GLOSS to GEN PURPOSE EPOXY POWDER COATING 50 LB BXEPOXY HIGH TEMP POWDER COATING IN ACCORDANCE WITH: MIL-PRF-23236D, TYPE VIII, CLASS 7, GRADE D MAX VOC: 75 g/LFED-STD-

595B: 24585COLOR: PASTEL GREEN, FINISH: SEMI-GLOSS.

SUBCLIN 0009AD

The CLIN extended description has changed from PAINT SYSTEM, ANTICORROSIVE AND

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE I MAX VOC: = 400 g/LFED-STD-595B: 26270COLOR: HAZE GRAY, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE IMAX

VOC: LESS THAN OR EQUAL TO 250 g/LFED-STD-595B: 26270COLOR: HAZE GRAY, FINISH: SEMI-

SUBCLIN 0009AE

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE I MAX VOC: = 400 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10

GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE I

MAX VOC LESS THAN OR EQUAL TO 250 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH:

SEMI-GLOSS.

SUBCLIN 0009AK

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LFED-STD-595B: 26270COLOR: HAZE GRAY, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC: LESS THAN OR EQUAL TO 250 g/LFED-STD-595B: 26270COLOR: HAZE GRAY, FINISH:

SUBCLIN 0009AL

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LFED-STD-595B: 20152COLOR: OXIDE RED, FINISH:

SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC:

LESS THAN OR EQUAL TO 250 g/LFED-STD-595B: 20152COLOR: OXIDE RED, FINISH: SEMI-GLOSS.

SUBCLIN 0009AM

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING (12 YR) IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II, APPL 3 MAX VOC: = 400 g/LFED-STD-595B:

27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING (12 YR) IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II, APPL 3 MAX VOC: LESS THAN OR EQUAL TO 250

SUBCLIN 0009AN

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING, PRIMER IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/L to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING, PRIMER IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC:LESS THAN OR EQUAL TO 250 g/L.

SUBCLIN 0009AP

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LCOLOR: WHITE OR OFF WHITE, FINISH: SEMI- GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC:LESS THAN OR EQUAL TO 250 g/LCOLOR: WHITE OR OFF WHITE, FINISH: SEMI-GLOSS.

SUBCLIN 0009AQ

ANTIFOULING, SHIP HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY COATING, PRIMER IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/L to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY

COATING, PRIMER IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC: LESS THAN OR EQUAL TO 250 g/L.

SUBCLIN 0009AR

ANTIFOULING, SHIP HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY COATING IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LFED-STD-595B: 20152COLOR:

OXIDE RED, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP

HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-

24647E, TYPE II MAX VOC: LESS THAN OR EQUAL TO 250 g/LFED-STD-595B: 20152COLOR: OXIDE

RED, FINISH: SEMI-GLOSS.

SUBCLIN 0010AF

The CLIN extended description has changed from COATING SYSTEM, NON-SKID 1 GALLON

KITHIGH DURABILITY, ROLLABLE, GEN USE & CARRIER LANDING AND RUN-OUT AREANON-SKID

COLOR TOPPING IN ACCORDANCE WITH: MIL-PRF-24667C, TYPE I & II, COMP G & L MAX VOC: 340 g/LFED-STD-595B: 31136COLOR: INSIGNIA RED, FINISH: FLAT to COATING SYSTEM, NON-SKID 1

GALLON KITHIGH DURABILITY, ROLLABLE, GEN USE & CARRIER LANDING AND RUN-OUT

AREANON-SKID COLOR TOPPING IN ACCORDANCE WITH: MIL-PRF-24667C, TYPE I & II, COMP G & L MAX VOC: 340 g/LCOLOR: INSIGNIA RED, FINISH: FLAT.

SUBCLIN 0011AA

The CLIN extended description has changed from ZINC-MOLYBDATE PRIMER 1 GALLON CANFORMULA 84 IN ACCORDANCE WITH: TT-P-645C MAX VOC: 21.2 g/LCOLOR: MEETS THE SPEC (TT-P-645C) AND OSHA/OSHE REQUIREMENTS to ZINC-MOLYBDATE PRIMER 1 GALLON

CANFORMULA 84 IN ACCORDANCE WITH: TT-P-645C MAX VOC: LESS THAN OR EQUAL TO 250

g/LCOLOR: MEETS THE SPEC (TT-P-645C) AND OSHA/OSHE REQUIREMENTS.

SUBCLIN 0011AB

The CLIN extended description has changed from ZINC-MOLYBDATE PRIMER 5 GALLON CANFORMULA 84 IN ACCORDANCE WITH: TT-P-645C MAX VOC: 21.2 g/LCOLOR: MEETS THE SPEC (TT-P-645C) AND OSHA/OSHE REQUIREMENTS to ZINC-MOLYBDATE PRIMER 5 GALLON

SUBCLIN 0013AB

The CLIN extended description has changed from SPECIALTY COATING, SPECIAL HULL TREATMENT (SHT) COATING 2 GALLON KITDTRC 2844-1109FED-STD-595B: 27038COLOR: BLACK, FINISH: SEMI-GLOSS to SPECIALTY COATING, SPECIAL HULL TREATMENT (SHT) COATING 2

GALLON KITDTRC 2844-1109COLOR: BLACK, FINISH: SEMI-GLOSS.

SUBCLIN 0014AB

The CLIN extended description has changed from SPECIALTY COATING, HIGH TEMP POLYSILOXANE 1 GALLON CANPSX® 892 HSMAX VOC: approx 324 g/L COLOR: ALUMINUM to SPECIALTY COATING, HIGH TEMP (750F) POLYSILOXANE HS1 GALLON CANPSX® 892 HSMAX VOC:

approx 324 g/L COLOR: ALUMINUM.

SUBCLIN 0014AC

POLYSILOXANE 1 GALLON CANPSX® 892 HSMAX VOC: approx 324 g/L FED-STD-595B: 17178COLOR:

HAZE GRAY, FINISH: GLOSS to SPECIALTY COATING, HIGH TEMP (750F) POLYSILOXANE HS1 GALLON CANPSX® 892 HSMAX VOC: approx 324 g/L FED-STD-595B: 17178COLOR: HAZE GRAY, FINISH: GLOSS.

SUBCLIN 0015AC

The CLIN extended description has changed from MISC SOLVENTS 5 GALLON CANSOLVENT (MEK) FOR USE WITH MIL-PRF-23236D, TYPE VII PAINT to MISC SOLVENTS 5 GALLON CANSOLVENT

(MEK).

SUBCLIN 0015AD

The CLIN extended description has changed from MISC SOLVENTS 5 GALLON KITSOLVENT (MAK) FOR USE WITH MIL-PRF-23635 to MISC SOLVENTS 5 GALLON KITSOLVENT (MAK).

SUBCLIN 0015AE

The CLIN extended description has changed from MISC SOLVENTS 5 GALLON CANSOLVENT (T-

10) FOR USE WITH MIL-PRF-24647E PAINTS/AF to MISC SOLVENTS 5 GALLON CANSOLVENT (T-10).

SUBCLIN 1002AA

The pricing detail quantity has increased by 5.00 from 416.00 to 421.00.

SUBCLIN 1003AG

COATING 2 GALLON KITFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH: MIL-DTL-

24441/23A OR 23B, TYPE III AX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH:

SEMI-GLOSS to RFW AND PW TANK COATING/SPECIALTY COATING 2 GALLON KITFORMULA 153

SUBCLIN 1003AJ

The pricing detail quantity has increased by 1,020.00 from 567.00 to 1,587.00.

SUBCLIN 1003AL

The pricing detail quantity has increased by 10.00 from 363.00 to 373.00.

SUBCLIN 1003AQ

KITFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH: MIL-DTL-2444132A OR 32B, TYPE IV MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to GEN

PURPOSE AC EPOXY 10 GALLON KITFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH:

The pricing detail quantity has increased by 10.00 from 507.00 to 517.00.

SUBCLIN 1003AR

CARTRIDGEFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH: MIL-DTL-2444132A OR 32B, TYPE IV MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to GEN

PURPOSE AC EPOXY 20 OUNCE CARTRIDGEFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE

SUBCLIN 1004AC

The pricing detail quantity has increased by 5.00 from 310.00 to 315.00.

SUBCLIN 1004AP

The pricing detail quantity has increased by 25.00 from 408.00 to 433.00.

SUBCLIN 1005AA

CAMOUFLAGE/NON-SKID COATINGS 2 GALLON KITFORMULA 184, EPOXY, RO 1.8 IN

ACCORDANCE WITH: MIL-DTL-24631/1C (SH), TYPE I MAX VOC: 340 g/LFED-STD-595B: 27038COLOR:

BLACK, FINISH: SEMI-GLOSS to SPECIAL HULL TREATMENT (SHT) CAMOUFLAGE/NON-SKID

SUBCLIN 1005AC

CAMOUFLAGE COATINGS1.25 GALLON KITFORMULA 187 POLYESTER URETHANE IN

ACCORDANCE WITH: MIL-DTL-24631/7 (SH) MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK, FINISH: SEMI-GLOSS to SPECIAL HULL TREATMENT (SHT) CAMOUFLAGE COATINGS1.25 GALLON

SUBCLIN 1005AD

CAMOUFLAGE COATINGS1.25 QUART KITFORMULA 187 POLYESTER URETHANE IN ACCORDANCE

WITH: MIL-DTL-24631/7 (SH) MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK, FINISH: SEMI- GLOSS to SPECIAL HULL TREATMENT (SHT) CAMOUFLAGE COATINGS1.25 QUART KITFORMULA

SUBCLIN 1006AG

GALLON KITEPOXY FOR TEMPS ABOVE 50°F IN ACCORDANCE WITH: MIL-PRF-23236D, TYPE VII, CLASS 9, GRADE C MAX VOC: 150 g/LCOLOR: LIGHT GRAY to FW AND PW TK SPECIALTY COATING

SUBCLIN 1006AK

OUNCE CARTRIDGEEPOXY FOR TEMPS ABOVE 50°F IN ACCORDANCE WITH: MIL-PRF-23236D, TYPE VII, CLASS 9, GRADE C MAX VOC: 150 g/LCOLOR: LIGHT GRAY to FW AND PW TK SPECIALTY

SUBCLIN 1006BP

The pricing detail quantity has increased by 100.00 from 1,005.00 to 1,105.00.

SUBCLIN 1006CH

BXEPOXY HIGH TEMP POWDER COATING IN ACCORDANCE WITH: MIL-PRF-23236D, TYPE VIII,

CLASS 7, GRADE D MAX VOC: 75 g/LFED-STD-595B: 24585COLOR: PASTEL GEEN, FINISH: SEMI- GLOSS to GEN PURPOSE EPOXY POWDER COATING 50 LB BXEPOXY HIGH TEMP POWDER COATING

SUBCLIN 1007AA

The pricing detail quantity has increased by 25.00 from 291.00 to 316.00.

SUBCLIN 1007AB

The pricing detail quantity has increased by 25.00 from 280.00 to 305.00.

SUBCLIN 1007AC

The pricing detail quantity has increased by 25.00 from 292.00 to 317.00.

SUBCLIN 1007AD

The pricing detail quantity has increased by 25.00 from 131.00 to 156.00.

SUBCLIN 1008BA

The pricing detail quantity has increased by 40.00 from 125.00 to 165.00.

SUBCLIN 1009AD

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE I MAX VOC: = 400 g/LFED-STD-595B: 26270COLOR: HAZE GRAY, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE IMAX

SUBCLIN 1009AE

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE I MAX VOC: = 400 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10

GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE I

SUBCLIN 1009AK

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LFED-STD-595B: 26270COLOR: HAZE GRAY, GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE II

SUBCLIN 1009AL

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LFED-STD-595B: 20152COLOR: OXIDE RED, FINISH:

SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON

SUBCLIN 1009AM

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING (12 YR) IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II, APPL 3 MAX VOC: = 400 g/LFED-STD-595B:

27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING (12 YR) IN

SUBCLIN 1009AN

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING, PRIMER IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/L to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING, SUBCLIN 1009AP

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LCOLOR: WHITE OR OFF WHITE, FINISH: SEMI- GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS

SUBCLIN 1009AQ

ANTIFOULING, SHIP HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY COATING, PRIMER IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/L to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY

SUBCLIN 1009AR

ANTIFOULING, SHIP HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY COATING IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LFED-STD-595B: 20152COLOR:

OXIDE RED, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP

HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-

SUBCLIN 1010AF

KITHIGH DURABILITY, ROLLABLE, GEN USE & CARRIER LANDING AND RUN-OUT AREANON-SKID

COLOR TOPPING IN ACCORDANCE WITH: MIL-PRF-24667C, TYPE I & II, COMP G & L MAX VOC: 340 g/LFED-STD-595B: 31136COLOR: INSIGNIA RED, FINISH: FLAT to COATING SYSTEM, NON-SKID 1

GALLON KITHIGH DURABILITY, ROLLABLE, GEN USE & CARRIER LANDING AND RUN-OUT

SUBCLIN 1011AA

CANFORMULA 84 IN ACCORDANCE WITH: TT-P-645C MAX VOC: 21.2 g/LCOLOR: MEETS THE SPEC (TT-P-645C) AND OSHA/OSHE REQUIREMENTS to ZINC-MOLYBDATE PRIMER 1 GALLON

SUBCLIN 1011AB

CANFORMULA 84 IN ACCORDANCE WITH: TT-P-645C MAX VOC: 21.2 g/LCOLOR: MEETS THE SPEC (TT-P-645C) AND OSHA/OSHE REQUIREMENTS to ZINC-MOLYBDATE PRIMER 5 GALLON

SUBCLIN 1013AB

TREATMENT (SHT) COATING 2 GALLON KITDTRC 2844-1109FED-STD-595B: 27038COLOR: BLACK, SUBCLIN 1014AB

POLYSILOXANE 1 GALLON CANPSX® 892 HSMAX VOC: approx 324 g/L COLOR: ALUMINUM to

SUBCLIN 1014AC

POLYSILOXANE 1 GALLON CANPSX® 892 HSMAX VOC: approx 324 g/L FED-STD-595B: 17178COLOR:

HAZE GRAY, FINISH: GLOSS to SPECIALTY COATING, HIGH TEMP (750F) POLYSILOXANE HS1

SUBCLIN 1015AC

SUBCLIN 1015AD

SUBCLIN 1015AE

SUBCLIN 2002AA

SUBCLIN 2003AG

COATING 2 GALLON KITFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH: MIL-DTL-

24441/23A OR 23B, TYPE III AX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH:

SEMI-GLOSS to RFW AND PW TANK COATING/SPECIALTY COATING 2 GALLON KITFORMULA 153

SUBCLIN 2003AJ

SUBCLIN 2003AL

SUBCLIN 2003AQ

KITFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH: MIL-DTL-2444132A OR 32B, TYPE IV MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to GEN

PURPOSE AC EPOXY 10 GALLON KITFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH:

SUBCLIN 2003AR

CARTRIDGEFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH: MIL-DTL-2444132A OR 32B, TYPE IV MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to GEN

PURPOSE AC EPOXY 20 OUNCE CARTRIDGEFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE

SUBCLIN 2004AC

SUBCLIN 2004AP

SUBCLIN 2005AA

CAMOUFLAGE/NON-SKID COATINGS 2 GALLON KITFORMULA 184, EPOXY, RO 1.8 IN

ACCORDANCE WITH: MIL-DTL-24631/1C (SH), TYPE I MAX VOC: 340 g/LFED-STD-595B: 27038COLOR:

BLACK, FINISH: SEMI-GLOSS to SPECIAL HULL TREATMENT (SHT) CAMOUFLAGE/NON-SKID

SUBCLIN 2005AC

CAMOUFLAGE COATINGS1.25 GALLON KITFORMULA 187 POLYESTER URETHANE IN

ACCORDANCE WITH: MIL-DTL-24631/7 (SH) MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK, FINISH: SEMI-GLOSS to SPECIAL HULL TREATMENT (SHT) CAMOUFLAGE COATINGS1.25 GALLON

SUBCLIN 2005AD

CAMOUFLAGE COATINGS1.25 QUART KITFORMULA 187 POLYESTER URETHANE IN ACCORDANCE

WITH: MIL-DTL-24631/7 (SH) MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK, FINISH: SEMI- GLOSS to SPECIAL HULL TREATMENT (SHT) CAMOUFLAGE COATINGS1.25 QUART KITFORMULA

SUBCLIN 2006AG

GALLON KITEPOXY FOR TEMPS ABOVE 50°F IN ACCORDANCE WITH: MIL-PRF-23236D, TYPE VII, CLASS 9, GRADE C MAX VOC: 150 g/LCOLOR: LIGHT GRAY to FW AND PW TK SPECIALTY COATING

SUBCLIN 2006AK

OUNCE CARTRIDGEEPOXY FOR TEMPS ABOVE 50°F IN ACCORDANCE WITH: MIL-PRF-23236D, TYPE VII, CLASS 9, GRADE C MAX VOC: 150 g/LCOLOR: LIGHT GRAY to FW AND PW TK SPECIALTY

SUBCLIN 2006BP

SUBCLIN 2006CH

BXEPOXY HIGH TEMP POWDER COATING IN ACCORDANCE WITH: MIL-PRF-23236D, TYPE VIII,

CLASS 7, GRADE D MAX VOC: 75 g/LFED-STD-595B: 24585COLOR: PASTEL GEEN, FINISH: SEMI- GLOSS to GEN PURPOSE EPOXY POWDER COATING 50 LB BXEPOXY HIGH TEMP POWDER COATING

SUBCLIN 2007AA

SUBCLIN 2007AB

SUBCLIN 2007AC

SUBCLIN 2007AD

SUBCLIN 2008BA

SUBCLIN 2009AD

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE I MAX VOC: = 400 g/LFED-STD-595B: 26270COLOR: HAZE GRAY, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE IMAX

SUBCLIN 2009AE

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE I MAX VOC: = 400 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10

GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE I

SUBCLIN 2009AK

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LFED-STD-595B: 26270COLOR: HAZE GRAY, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE II

SUBCLIN 2009AL

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LFED-STD-595B: 20152COLOR: OXIDE RED, FINISH:

SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON

SUBCLIN 2009AM

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING (12 YR) IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II, APPL 3 MAX VOC: = 400 g/LFED-STD-595B:

27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING (12 YR) IN

SUBCLIN 2009AN

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING, PRIMER IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/L to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING, SUBCLIN 2009AP

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LCOLOR: WHITE OR OFF WHITE, FINISH: SEMI- GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS

SUBCLIN 2009AQ

ANTIFOULING, SHIP HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY COATING, PRIMER IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/L to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY

SUBCLIN 2009AR

ANTIFOULING, SHIP HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY COATING IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LFED-STD-595B: 20152COLOR:

OXIDE RED, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP

HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-

SUBCLIN 2010AF

KITHIGH DURABILITY, ROLLABLE, GEN USE & CARRIER LANDING AND RUN-OUT AREANON-SKID

COLOR TOPPING IN ACCORDANCE WITH: MIL-PRF-24667C, TYPE I & II, COMP G & L MAX VOC: 340 g/LFED-STD-595B: 31136COLOR: INSIGNIA RED, FINISH: FLAT to COATING SYSTEM, NON-SKID 1

GALLON KITHIGH DURABILITY, ROLLABLE, GEN USE & CARRIER LANDING AND RUN-OUT

SUBCLIN 2011AA

CANFORMULA 84 IN ACCORDANCE WITH: TT-P-645C MAX VOC: 21.2 g/LCOLOR: MEETS THE SPEC (TT-P-645C) AND OSHA/OSHE REQUIREMENTS to ZINC-MOLYBDATE PRIMER 1 GALLON

SUBCLIN 2011AB

CANFORMULA 84 IN ACCORDANCE WITH: TT-P-645C MAX VOC: 21.2 g/LCOLOR: MEETS THE SPEC (TT-P-645C) AND OSHA/OSHE REQUIREMENTS to ZINC-MOLYBDATE PRIMER 5 GALLON

SUBCLIN 2013AB

TREATMENT (SHT) COATING 2 GALLON KITDTRC 2844-1109FED-STD-595B: 27038COLOR: BLACK, SUBCLIN 2014AB

POLYSILOXANE 1 GALLON CANPSX® 892 HSMAX VOC: approx 324 g/L COLOR: ALUMINUM to

SUBCLIN 2014AC

POLYSILOXANE 1 GALLON CANPSX® 892 HSMAX VOC: approx 324 g/L FED-STD-595B: 17178COLOR:

HAZE GRAY, FINISH: GLOSS to SPECIALTY COATING, HIGH TEMP (750F) POLYSILOXANE HS1

SUBCLIN 2015AC

SUBCLIN 2015AD

SUBCLIN 2015AE

SUBCLIN 3003AG

COATING 2 GALLON KITFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH: MIL-DTL-

24441/23A OR 23B, TYPE III AX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH:

SEMI-GLOSS to RFW AND PW TANK COATING/SPECIALTY COATING 2 GALLON KITFORMULA 153

SUBCLIN 3003AQ

KITFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH: MIL-DTL-2444132A OR 32B, TYPE IV MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to GEN

PURPOSE AC EPOXY 10 GALLON KITFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH:

SUBCLIN 3003AR

CARTRIDGEFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH: MIL-DTL-2444132A OR 32B, TYPE IV MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to GEN

PURPOSE AC EPOXY 20 OUNCE CARTRIDGEFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE

SUBCLIN 3005AA

CAMOUFLAGE/NON-SKID COATINGS 2 GALLON KITFORMULA 184, EPOXY, RO 1.8 IN

ACCORDANCE WITH: MIL-DTL-24631/1C (SH), TYPE I MAX VOC: 340 g/LFED-STD-595B: 27038COLOR:

BLACK, FINISH: SEMI-GLOSS to SPECIAL HULL TREATMENT (SHT) CAMOUFLAGE/NON-SKID

SUBCLIN 3005AC

CAMOUFLAGE COATINGS1.25 GALLON KITFORMULA 187 POLYESTER URETHANE IN

ACCORDANCE WITH: MIL-DTL-24631/7 (SH) MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK, FINISH: SEMI-GLOSS to SPECIAL HULL TREATMENT (SHT) CAMOUFLAGE COATINGS1.25 GALLON

SUBCLIN 3005AD

CAMOUFLAGE COATINGS1.25 QUART KITFORMULA 187 POLYESTER URETHANE IN ACCORDANCE

WITH: MIL-DTL-24631/7 (SH) MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK, FINISH: SEMI- GLOSS to SPECIAL HULL TREATMENT (SHT) CAMOUFLAGE COATINGS1.25 QUART KITFORMULA

SUBCLIN 3006AG

GALLON KITEPOXY FOR TEMPS ABOVE 50°F IN ACCORDANCE WITH: MIL-PRF-23236D, TYPE VII, CLASS 9, GRADE C MAX VOC: 150 g/LCOLOR: LIGHT GRAY to FW AND PW TK SPECIALTY COATING

SUBCLIN 3006AK

OUNCE CARTRIDGEEPOXY FOR TEMPS ABOVE 50°F IN ACCORDANCE WITH: MIL-PRF-23236D, TYPE VII, CLASS 9, GRADE C MAX VOC: 150 g/LCOLOR: LIGHT GRAY to FW AND PW TK SPECIALTY

SUBCLIN 3006CH

BXEPOXY HIGH TEMP POWDER COATING IN ACCORDANCE WITH: MIL-PRF-23236D, TYPE VIII,

CLASS 7, GRADE D MAX VOC: 75 g/LFED-STD-595B: 24585COLOR: PASTEL GEEN, FINISH: SEMI- GLOSS to GEN PURPOSE EPOXY POWDER COATING 50 LB BXEPOXY HIGH TEMP POWDER COATING

SUBCLIN 3009AD

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE I MAX VOC: = 400 g/LFED-STD-595B: 26270COLOR: HAZE GRAY, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE IMAX

SUBCLIN 3009AE

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE I MAX VOC: = 400 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10

GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE I

SUBCLIN 3009AK

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LFED-STD-595B: 26270COLOR: HAZE GRAY, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE II

SUBCLIN 3009AL

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LFED-STD-595B: 20152COLOR: OXIDE RED, FINISH:

SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON

SUBCLIN 3009AM

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING (12 YR) IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II, APPL 3 MAX VOC: = 400 g/LFED-STD-595B:

27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING (12 YR) IN

SUBCLIN 3009AN

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING, PRIMER IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/L to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING, SUBCLIN 3009AP

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LCOLOR: WHITE OR OFF WHITE, FINISH: SEMI- GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS

SUBCLIN 3009AQ

ANTIFOULING, SHIP HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY COATING, PRIMER IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/L to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY

SUBCLIN 3009AR

ANTIFOULING, SHIP HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY COATING IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LFED-STD-595B: 20152COLOR:

OXIDE RED, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP

HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-

SUBCLIN 3010AF

KITHIGH DURABILITY, ROLLABLE, GEN USE & CARRIER LANDING AND RUN-OUT AREANON-SKID

COLOR TOPPING IN ACCORDANCE WITH: MIL-PRF-24667C, TYPE I & II, COMP G & L MAX VOC: 340 g/LFED-STD-595B: 31136COLOR: INSIGNIA RED, FINISH: FLAT to COATING SYSTEM, NON-SKID 1

GALLON KITHIGH DURABILITY, ROLLABLE, GEN USE & CARRIER LANDING AND RUN-OUT

SUBCLIN 3011AA

CANFORMULA 84 IN ACCORDANCE WITH: TT-P-645C MAX VOC: 21.2 g/LCOLOR: MEETS THE SPEC (TT-P-645C) AND OSHA/OSHE REQUIREMENTS to ZINC-MOLYBDATE PRIMER 1 GALLON

SUBCLIN 3011AB

CANFORMULA 84 IN ACCORDANCE WITH: TT-P-645C MAX VOC: 21.2 g/LCOLOR: MEETS THE SPEC (TT-P-645C) AND OSHA/OSHE REQUIREMENTS to ZINC-MOLYBDATE PRIMER 5 GALLON

SUBCLIN 3013AB

TREATMENT (SHT) COATING 2 GALLON KITDTRC 2844-1109FED-STD-595B: 27038COLOR: BLACK, SUBCLIN 3014AB

POLYSILOXANE 1 GALLON CANPSX® 892 HSMAX VOC: approx 324 g/L COLOR: ALUMINUM to

SUBCLIN 3014AC

POLYSILOXANE 1 GALLON CANPSX® 892 HSMAX VOC: approx 324 g/L FED-STD-595B: 17178COLOR:

HAZE GRAY, FINISH: GLOSS to SPECIALTY COATING, HIGH TEMP (750F) POLYSILOXANE HS1

SUBCLIN 3015AC

SUBCLIN 3015AD

SUBCLIN 3015AE

SUBCLIN 4002AA

SUBCLIN 4003AG

COATING 2 GALLON KITFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH: MIL-DTL-

24441/23A OR 23B, TYPE III AX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH:

SEMI-GLOSS to RFW AND PW TANK COATING/SPECIALTY COATING 2 GALLON KITFORMULA 153

SUBCLIN 4003AJ

SUBCLIN 4003AL

SUBCLIN 4003AQ

KITFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH: MIL-DTL-2444132A OR 32B, TYPE IV MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to GEN

PURPOSE AC EPOXY 10 GALLON KITFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH:

SUBCLIN 4003AR

CARTRIDGEFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE WITH: MIL-DTL-2444132A OR 32B, TYPE IV MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to GEN

PURPOSE AC EPOXY 20 OUNCE CARTRIDGEFORMULA 153 EPOXY-POLYAMIDE IN ACCORDANCE

SUBCLIN 4004AC

SUBCLIN 4004AP

SUBCLIN 4005AA

CAMOUFLAGE/NON-SKID COATINGS 2 GALLON KITFORMULA 184, EPOXY, RO 1.8 IN

ACCORDANCE WITH: MIL-DTL-24631/1C (SH), TYPE I MAX VOC: 340 g/LFED-STD-595B: 27038COLOR:

BLACK, FINISH: SEMI-GLOSS to SPECIAL HULL TREATMENT (SHT) CAMOUFLAGE/NON-SKID

SUBCLIN 4005AC

CAMOUFLAGE COATINGS1.25 GALLON KITFORMULA 187 POLYESTER URETHANE IN

ACCORDANCE WITH: MIL-DTL-24631/7 (SH) MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK, FINISH: SEMI-GLOSS to SPECIAL HULL TREATMENT (SHT) CAMOUFLAGE COATINGS1.25 GALLON

SUBCLIN 4005AD

CAMOUFLAGE COATINGS1.25 QUART KITFORMULA 187 POLYESTER URETHANE IN ACCORDANCE

WITH: MIL-DTL-24631/7 (SH) MAX VOC: 340 g/LFED-STD-595B: 27038COLOR: BLACK, FINISH: SEMI- GLOSS to SPECIAL HULL TREATMENT (SHT) CAMOUFLAGE COATINGS1.25 QUART KITFORMULA

SUBCLIN 4006AG

GALLON KITEPOXY FOR TEMPS ABOVE 50°F IN ACCORDANCE WITH: MIL-PRF-23236D, TYPE VII, CLASS 9, GRADE C MAX VOC: 150 g/LCOLOR: LIGHT GRAY to FW AND PW TK SPECIALTY COATING

SUBCLIN 4006AK

OUNCE CARTRIDGEEPOXY FOR TEMPS ABOVE 50°F IN ACCORDANCE WITH: MIL-PRF-23236D, TYPE VII, CLASS 9, GRADE C MAX VOC: 150 g/LCOLOR: LIGHT GRAY to FW AND PW TK SPECIALTY

SUBCLIN 4006BP

SUBCLIN 4006CH

BXEPOXY HIGH TEMP POWDER COATING IN ACCORDANCE WITH: MIL-PRF-23236D, TYPE VIII,

CLASS 7, GRADE D MAX VOC: 75 g/LFED-STD-595B: 24585COLOR: PASTEL GEEN, FINISH: SEMI- GLOSS to GEN PURPOSE EPOXY POWDER COATING 50 LB BXEPOXY HIGH TEMP POWDER COATING

SUBCLIN 4007AA

SUBCLIN 4007AB

SUBCLIN 4007AC

SUBCLIN 4007AD

SUBCLIN 4008BA

SUBCLIN 4009AD

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE I MAX VOC: = 400 g/LFED-STD-595B: 26270COLOR: HAZE GRAY, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE IMAX

SUBCLIN 4009AE

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE I MAX VOC: = 400 g/LFED-STD-595B: 27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10

GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE I

SUBCLIN 4009AK

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LFED-STD-595B: 26270COLOR: HAZE GRAY, GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-24647E, TYPE II

SUBCLIN 4009AL

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LFED-STD-595B: 20152COLOR: OXIDE RED, FINISH:

SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON

SUBCLIN 4009AM

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING (12 YR) IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II, APPL 3 MAX VOC: = 400 g/LFED-STD-595B:

27038COLOR: BLACK RO. 1.8, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING (12 YR) IN

SUBCLIN 4009AN

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING, PRIMER IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/L to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING, SUBCLIN 4009AP

ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS HULL AC EPOXY COATING IN ACCORDANCE

WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LCOLOR: WHITE OR OFF WHITE, FINISH: SEMI- GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 10 GALLON KITSHIPS

SUBCLIN 4009AQ

ANTIFOULING, SHIP HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY COATING, PRIMER IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/L to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY

SUBCLIN 4009AR

ANTIFOULING, SHIP HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY COATING IN

ACCORDANCE WITH: MIL-PRF-24647E, TYPE II MAX VOC: = 400 g/LFED-STD-595B: 20152COLOR:

OXIDE RED, FINISH: SEMI-GLOSS to PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP

HULL 20 OUNCE CARTRIDGESHIPS HULL AC EPOXY COATING IN ACCORDANCE WITH: MIL-PRF-

SUBCLIN 4010AF

KITHIGH DURABILITY, ROLLABLE, GEN USE & CARRIER LANDING AND RUN-OUT AREANON-SKID

COLOR TOPPING IN ACCORDANCE WITH: MIL-PRF-24667C, TYPE I & II, COMP G & L MAX VOC: 340 g/LFED-STD-595B: 31136COLOR: INSIGNIA RED, FINISH: FLAT to COATING SYSTEM, NON-SKID 1

GALLON KITHIGH DURABILITY, ROLLABLE, GEN USE & CARRIER LANDING AND RUN-OUT

SUBCLIN 4011AA

CANFORMULA 84 IN ACCORDANCE WITH: TT-P-645C MAX VOC: 21.2 g/LCOLOR: MEETS THE SPEC (TT-P-645C) AND OSHA/OSHE REQUIREMENTS to ZINC-MOLYBDATE PRIMER 1 GALLON

SUBCLIN 4011AB

CANFORMULA 84 IN ACCORDANCE WITH: TT-P-645C MAX VOC: 21.2 g/LCOLOR: MEETS THE SPEC (TT-P-645C) AND OSHA/OSHE REQUIREMENTS to ZINC-MOLYBDATE PRIMER 5 GALLON

SUBCLIN 4013AB

TREATMENT (SHT) COATING 2 GALLON KITDTRC 2844-1109FED-STD-595B: 27038COLOR: BLACK, SUBCLIN 4014AB

POLYSILOXANE 1 GALLON CANPSX® 892 HSMAX VOC: approx 324 g/L COLOR: ALUMINUM to

SUBCLIN 4014AC

POLYSILOXANE 1 GALLON CANPSX® 892 HSMAX VOC: approx 324 g/L FED-STD-595B: 17178COLOR:

HAZE GRAY, FINISH: GLOSS to SPECIALTY COATING, HIGH TEMP (750F) POLYSILOXANE HS1

SUBCLIN 4015AC

SUBCLIN 4015AD

SUBCLIN 4015AE

The following have been modified:

SPECIAL NOTES

STATEMENT OF WORK AND SPECIFICATIONS

SCOPE

Defense Logistics Agency (DLA) Maritime Norfolk is seeking to establish a Fixed Price with Economic Price Adjustment (EPA), Long Term, Requirements contract to provide direct delivery of marine paint approved for Navy shipboard use, delivered Just-In-Time (JIT).

The Government reserves the right to add marine coatings approved for Navy Shipboard use in the future if determined to be in the Government's best interest. Items added are subject to Competition in Contracting Act (CICA) requirements and these will only be applied if they are within the scope of the contract. Should the Government be unable to determine pricing for a coating fair and reasonable, the Government reserves the right to procure outside of the JIT Marine Coatings Contract.

BACKGROUND / INTENT

This procurement will utilize the Direct Vendor Delivery (DVD) program to improve supply system service to the customers while reducing the cost of supply system operations. DVD contracts improve materiel availability, decrease backorders and speed up the purchasing process, as compared to traditional stock contracts.

The required delivery date (RDD) for the marine coatings is no later than 72 hours after a “release order” is placed.

In the JIT delivery process, the four (4) Naval Shipyards, Norfolk Naval Shipyard (NNSY), Pearl Harbor Naval Shipyard (PHNSY), Portsmouth Naval Shipyard (PNSY) and Puget Sound Naval Shipyard (PSNSY), develop forecasts of the marine coatings needed and communicate these requirements to the contractor through delivery orders issued at least quarterly.

This improved logistics support will take place by seeking innovative, state of the art private sector companies who focus on customer satisfaction as their primary measurement of success. DLA Maritime Norfolk is seeking to improve the availability, quality and delivery times of commercially available commodities to our customers. The ultimate effect is to support our customers more efficiently while saving taxpayer dollars by reducing the supply system infrastructure.

Applicable Documents The latest revisions of the enclosed documents form a part of the resultant, including modifications or exclusions, to the extent specified herein and must be obtained by the Contractor.

Period of Performance The Government anticipates the period of performance for the base period will be for 12 months beginning 30 days after contract with four 12 month option periods.

MATERIAL REQUIREMENTS

Product Performance Requirements Products furnished under this contract shall comply with all contract Military Specification (MIL-Spec) and specification requirements. The Government’s technical data requirements consist of the following:

a) Material Safety Data Sheets (MSDS), Form OSHA-20 FED-STD-313

b) ASTM F 718 data sheet of record, reviewed by Naval Sea Systems Command (NAVSEA) 05M

c) Manufacturer Product Data Sheets

d) Certification that the offeror is or is not the actual manufacturer of the item(s) covered by this solicitation. For offerors who are not the manufacturers of proposed products, the following information is to be provided:

a. Actual Manufacturer(s) Identification [if more than one, identify all]: Name and Address, Actual Manufacturer’s Part Number or other identification.

b. Support effort performed by the respondent in addition to purchasing the item(s) for resale to the Government:

• Testing/Quality Assurance: Yes/No

• Preservation, Packaging, and Packing: Yes/No

• Bar Coding Yes/No

• Other _____________________________________________

e) Certification of NAVSEA approval

Color All colors under this contract shall match a color standard under FED-STD-595C; except R0 color paints. Colors not specified per FED-STD-595C shall match to a military specification (MIL-SPEC) or standard agreed upon by the Government and the Contractor. The Contractor shall furnish any color and gloss specified in the applicable Military Specification (MIL-SPEC), NSTM Chapter 631, SMS 6310-081-015, and NAVSEA Standard Item 009-32.

All items under this contract shall be uniformly proposed based on volume (i.e. regardless of container size or color).

Solvents The Contractor shall provide manufacturer recommended compatible solvents for thinning (as allowed), and / or cleaning purposes for all proprietary products under this contract.

Shelf Life All products furnished under this contract shall have not less than 50 percent (50%) of shelf-life remaining at the time of delivery of product on activity based on the manufacturer’s product expiration date in accordance with DOD

4140.27 for Type II material. Any delivery from the Contractor not having at least 50 percent (50%) shelf-life remaining shall normally be considered non-conforming. Shelf-life material received without the required shelf-life markings is unacceptable.

NESHAP Requirements All materials provided shall comply with EPA NESHAP, 40 CFR Part 63 – Table 2 of Subpart II, Volatile Organic Hazardous Air Pollutants (VOHAP) Limits for Marine Coatings, and shall be shipped to the Government per Section D. Conformance to a Military Specification (MIL-Spec) is acceptable as long as it relates to a specific NESHAP Category.

For each proposed product, the contractor shall provide a Statement of Volatiles Organic Compounds (VOC) conformance, as follows:

“For [named] product, respondent affirms the establishment of sound and consistent quality control procedures in batch formulation and manufacturing processes, which prevent significant batch to batch variation in product VOC content. The product VOC value presented in this paragraph has a consistent and quantitatively known relationship to the EPA Method 24 result that would be obtained by testing a sample from any quality control approved production batch of this product. Based on the quality control procedures affirmed above, respondent certifies that any batch of this product, if tested by analytical test Method 24 of Appendix A of 40 CFR Part 60, will not exceed a VOC content of [product VOC value] grams/liter when used in accordance with manufacturer instructions.”

Target Chemical Minimization. For each proposed product, the contractor shall provide Percentage (by weight) of the following target chemicals present:

a. Benzene, Beryllium and Beryllium Compounds, Cadmium and Cadmium Compounds, Carbon Tetrachloride, Chromium and Chromium Compounds, Ethylene Glycol, Lead and Lead Compounds, Mercury and Mercury Compounds, Methyl Chloroform (1,1,1-Trichloroethane), N-Butyl Alcohol, Methyl Ethyl Ketone, Methylene Chloride (Dichloromethane), Toluene, Trichlorotrifluoroethane (CFC-113), Xylene, Zinc Chromate.

b. Provide a narrative description of how the overall suite of products proposed supports the general objective of minimizing the overall usage of NAVSEA targeted chemicals, as described in a letter from the Naval Sea Systems Command (NAVSEA), dated 3 April 2003, tasking all Naval Shipyards to reduce or eliminate the use of all chemicals listed in section 1.3(a) above.

Product Exceptions The Contractor shall state any exceptions to the Government’s requirements by citing the requirement and explaining precisely how the proposed item differs from the requirement described by the specifications in the solicitation.

SERVICE REQUIRMENTS

JIT Process Overview In the JIT delivery process, the Shipyard develops forecasts of its Maritime Coatings needs and communicates these requirements to the contractor through delivery orders issued at least quarterly. The contractor shall manufacture and store coatings to meet the Shipyards’ needs indicated in these forecasts. Once manufactured coatings have been shipped to the contractor’s storage facility, the contractor shall provide samples of production batches to the Shipyard for testing prior to delivery. Once a batch is tested and shown to be in compliance, the supplier is expected to store product in such a manner as to be able to deliver “release orders” against these quantities within 72 hours, although an expedited time of 24 hours may be required. The Navy must have access to inspect the supplier warehouse at any time to ensure storage conditions do not compromise the integrity of the material.

Ordering Requirements The Government shall provide the contractor demand forecast delivery order data, including CLIN/SubCLIN, Local Stock Number (LSN) and quantity (QTY), prior to the start of the delivery order period. For subsequent delivery orders, the contractor may be required to provide delivery data on each Shipyard location to assist each Shipyard in developing more accurate forecasts.

The primary method for placing orders under this contract is via standard delivery order award procedures for the purpose of facilitating efficient order processing. The Government retains the right to place orders other than standard delivery orders (i.e. electronically, in person, orally by phone, facsimile, etc.). All orders shall cite the appropriate CLIN and unit price as listed in the contract award. Designated Contracting Officers may enter into mutual, no-cost cancellations of individual orders under this contract and may reduce the quantity, or authorize a partial shipment of items. Designated Contracting Officers may also increase the quantity of the delivery order during the delivery order period. Any requests for deviation from the terms and conditions of the contract shall be submitted to the Contracting Officer for contractual action.

It is anticipated that the Government will issue a delivery order at least quarterly. Release orders (requests for delivery) by designated Government personnel will “draw-down” from the delivery order. Release orders may occur as often as daily. Personnel authorized to submit release orders to the Contractor will be designated at time of award. The Government will specify the applicable Delivery Order number(s) and Requisition (Document) number(s) with any release of order.

It is the Contractor’s responsibility to be able to read and understand Local Stock Numbers (LSN’s) as supplied by the Government, and cross reference those numbers to standard part numbers, if necessary. Purchasers shall include the following minimum information in procurement documents:

• Requisition Number (Document No.)

• Contract line and sub-line number (CLIN)

• Local Stock Number (LSN), if applicable

• Quantity required (Each (EA), Unit of Issue)

• Work day hours for delivery purposes

• Point of contact for delivery

• Payment Instructions for Wide Area Work Flow, routing table for invoicing, or purchase card information

Storage and Delivery Requirements This section outlines the requirements for storage and delivery of Coatings to support the JIT system.

Warehousing Requirements The Contractor shall warehouse his inventory in such a way that facilitates JIT delivery as described in the Delivery Plan section. The Contractor shall comply with DLAD 4155.37 and FED-STD-793. The contractor warehouse shall meet the following requirements:

• Warehousing Capacity: Adequately store /warehouse…