S02 - Attachment 5 - Columbia EHRM Arch Drawing Set 3 of 9.pdf

07/14/2022 COLUMBIA VA HEALTH CARE SYSTEM, COLUMBIA, SC

544-20-107PROJECT # 544-20-107

EHRM INFRASTRUCTURE UPGRADES

www.atriaxgroup.com

Atriax, pllc 102 3rd Avenue, NE PO Box 1629, Hickory, NC 28603 Phone: 828.315.9962 Fax: 828.315.9964

NC Engineering License No.: P-0214 NC Architectural License No.: 51254 07/14/2022

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Fi le

P at h 6/

/2

:3

9:

P M

100% CONSTRUCTION

DOCUMENTS

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PhaseARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

Project Director

Revisions: Date:

Wiley|Wilson 127 Nationwide Drive Lynchburg, VA 24502 Phone: 434.947.1901 www.wileywilson.com

FOR OFFICIAL USE ONLY (FOUO)

FOR OFFICIAL USE ONLY (FOUO)

Specialized Engineering Solutions 1300 Baxter Street, Suite 355 Charlotte, NC 28204

NORT H CA ROL I N

A

E

DW

ARD H . HENSO

N

H

I CKORY , N . C

RE

G

IS

TERED ARCHITECT

BUILDING 5 LEVEL 01

DEMO PLAN / NEW FLOOR PLAN / RCP

A-005.1

MM/TRTG

CONSTRUCTION ACTIVITY® RISK LEVEL

INFECTION CONTROL MATRIX

TYPE “A” TYPE “B” TYPE “C” TYPE “D”

GROUP 1 I II II III / IV

GROUP 2

GROUP 3

GROUP 4

I II IV

I III III / IV IV

III III / IV III / IV IV

TEMPORARY PARTITION WALL APPROPRIATE

FOR INTERIM MEASURE CLASS. COORDINATE

WITH COR.

SHADED SELECTION APPLIES TO AREA OF WORK

AS INDICATED BY THE GROUP RISK LEVEL. REFER

TO SHEET GI102 FOR ICRA GUIDELINES.

GROUP 0 0 0 0 0

III

120 SF / 11.1 m²

VERTICAL SPACE

ELEV

RCC109R

132 SF / 12.3 m²

VERTICAL

SPACE

STAIR

RCC111R

154 SF / 14.3 m²

VERTICAL SPACE

STAIR

RCC112R

297 SF / 27.6 m²

COMMON

CORR

RCC105R

283 SF / 26.3 m²

COMMON

CORR

RCC101R

393 SF / 36.5 m²

COMMON

CORR

RCC102R

295 SF / 27.4 m²

EDUCATION

STOR

133 SF / 12.3 m²

TENANT SPACE

UCS FITNESS CENTER

166 SF / 15.4 m²

TENANT SPACE

UCS FITNESS CENTER

50 SF / 4.7 m²

TENANT SPACE

UCS FITNESS

CENTER

55 SF / 5.1 m²

TENANT SPACE

MECH SPACE

104C

148 SF / 13.8 m²

TENANT SPACE

UCS FITNESS CENTER

68 SF / 6.3 m²

TENANT SPACE

UCS FITNESS CENTER

116 SF / 10.8 m²

TENANT SPACE

UCS FITNESS CENTER

120 SF / 11.1 m²

TENANT SPACE

TLT

RCC104R

315 SF / 29.3 m²

COMMON

MECH RM

42 SF / 3.9 m²

VERTICAL SPACE

CHASE

RCC101C

26 SF / 2.4 m²

VERTICAL

SPACE

CHASE

RCC102C

29 SF / 2.7 m²

VERTICAL SPACE

CHASE

RCC103C

182 SF / 16.9 m²

TENANT SPACE

MAIL RM AND PRINTING

43 SF / 4 m²

LOGISTICS

MAIL RM AND

PRINTING

383 SF / 35.6 m²

LOGISTICS

MAIL RM AND PRINTING

126 SF / 11.7 m²

LOGISTICS

MAIL RM AND

PRINTING

30 SF / 2.8 m²

LOGISTICS

RCC106R

83 SF / 7.7 m²

LOGISTICS

MAIL RM AND PRINTING

1,347 SF / 125.1 m²

LOGISTICS

MAIL RM AND PRINTING

176 SF / 16.4 m²

LOGISTICS

MAIL RM AND

PRINTING

109A

34 SF / 3.1 m²

TENANT SPACE

COMM CLO

RCC110R

219 SF / 20.4 m²

TENANT SPACE

RCC108R

109 SF / 10.2 m²

VERTICAL SPACE

CHASE

RCC104C

1,584 SF / 147.1 m²

TENANT SPACE

USC

RCC107R

FECFE

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

TRUE

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/8" = 1'-0"

AutoCAD SHX Text

OVERALL FLOOR PLAN

AutoCAD SHX Text

LEVEL 01

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

DEMOLITION FLOOR PLAN

AutoCAD SHX Text

LEVEL 01

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

REFLECTED CEILING PLAN

AutoCAD SHX Text

LEVEL 01

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

NEW FLOOR PLAN

AutoCAD SHX Text

LEVEL 01

AutoCAD SHX Text 15 AREA FOR NEW TELECOM INFRASTRUCTURE, ELECTRICAL, AREA FOR NEW TELECOM INFRASTRUCTURE, ELECTRICAL, UPS, BMS INTERFACES, AND HVAC UPGRADES. 16 PARTITION TO REMAIN. REPAIR, PATCH AND/OR FILL PARTITION TO REMAIN. REPAIR, PATCH AND/OR FILL OPENINGS AS NECESSARY DUE TO CONSTRUCTION. 17 NEW CARD READER. SEE DOOR SCHEDULE, COORDINATE NEW CARD READER. SEE DOOR SCHEDULE, COORDINATE WITH ELECTRICAL. 18 EXTEND WALLS TO THE UNDERSIDE OF THE STRUCTURAL EXTEND WALLS TO THE UNDERSIDE OF THE STRUCTURAL DECK. MATCH WALLS TO EXITING WIDTH. 19 NEW PARTITION WALL EXTENDING TO DECK/LID ABOVE. NEW PARTITION WALL EXTENDING TO DECK/LID ABOVE. MATCH EXISTING FINISHES. 20 NEW DOOR, FRAME, HARDWARE, SILL AND JAMB. NEW DOOR, FRAME, HARDWARE, SILL AND JAMB. 21 PROVIDE HIGHER LEVEL OF FINISHES TO MATCH EXISTING. PROVIDE HIGHER LEVEL OF FINISHES TO MATCH EXISTING. 22 EXISTING WINDOW TO REMAIN. CLEAN AND APPLY BLACKOUTEXISTING WINDOW TO REMAIN. CLEAN AND APPLY BLACKOUTFILM. ENCLOSE WINDOW WITH METAL STUD AND " GYPSUM58" GYPSUMBOARD FINISHED FLUSH TO ADJACENT SURFACES. PROVIDE TWO 4"X8" VENTS, ONE EACH AT HEAD AND SILL. 4"X8" VENTS, ONE EACH AT HEAD AND SILL. 23 WALL MOUNTED TELECOM EQUIPMENT. WALL MOUNTED TELECOM EQUIPMENT. 24 ONE (1) LAYER " FIRE TREATED PLYWOOD OVER EXISTING ONE (1) LAYER " FIRE TREATED PLYWOOD OVER EXISTING 34" FIRE TREATED PLYWOOD OVER EXISTING AND NEW CONSTRUCTION TO BRACE EQUIPMENT. PLYWOOD TO BE CUT TO FIT AROUND EXISTING EQUIPMENT. PLYWOOD TO RECEIVE 2 COATS OF FIRE RESISTANT PAINT. REF. FINISH SCHEDULE ON A-601. 25 REINSTALL DOOR, FRAME, HARDWARE, SILL AND JAMB. REINSTALL DOOR, FRAME, HARDWARE, SILL AND JAMB. 26 PATCH AND REPAIR TO MATCH EXISTING AS REQUIRED FOR PATCH AND REPAIR TO MATCH EXISTING AS REQUIRED FOR NEW MECHANICAL/PLUMBING WORK. SEEMECHANICAL/PLUMBING SHEETS. 27 EXPOSED / OPEN TO STRUCTURE. CLEAN AS REQUIRED. EXPOSED / OPEN TO STRUCTURE. CLEAN AS REQUIRED. 28 EXISTING CEILING TO REMAIN. EXISTING CEILING TO REMAIN. 29 PATCH AND REPAIR EXISTING CEILING TO MATCH. PATCH AND REPAIR EXISTING CEILING TO MATCH. 30 CONSTRUCT NEW GYP. BD. CEILING AND/OR LID. CONSTRUCT NEW GYP. BD. CEILING AND/OR LID. 31 PROVIDE FLOOR, BASE AND WALL FINISHES TO MATCH PROVIDE FLOOR, BASE AND WALL FINISHES TO MATCH EXISTING ADJACENT SURFACES 32 DEMOLISH EXISTING WINDOW. ENCLOSE OPENING TO MATCH DEMOLISH EXISTING WINDOW. ENCLOSE OPENING TO MATCH EXISTING STRUCTURE AND FINISH TO MATCH.

AutoCAD SHX Text GENERAL NOTES 1. ALL DIMENSIONS ARE MEASURED FROM FACE OF EXISTING WALL TO ALL DIMENSIONS ARE MEASURED FROM FACE OF EXISTING WALL TO THE FACE OF NEW WALL UNLESS NOTED OTHERWISE. 2. FOR PARTITION TYPES AND DETAILS SEE SHEET A-301. ALL NEW FOR PARTITION TYPES AND DETAILS SEE SHEET A-301. ALL NEW WALLS SHALL BE WALL TYPE C3 UNO. 3. SEE FINISH SCHEDULE ON SHEET A-601. SEE FINISH SCHEDULE ON SHEET A-601. 4. ALL TELECOM ROOMS AND DATA CENTER SHALL RECEIVE 12X12 ESD ALL TELECOM ROOMS AND DATA CENTER SHALL RECEIVE 12X12 ESD CONDUCTIVE STATIC CONTROL RESILIENT FLOOR TILE. BASIS OF DESIGN IS ROPPE ESD #701 NEUTRON. ALTERNATIVES MAY BE SUGGESTED BY THE CONTRACTOR AND REQUIRE VA COR APPROVAL. 5. AUTOMATIC DOOR CLOSERS TO BE INSTALLED ON DOORS TO TR AUTOMATIC DOOR CLOSERS TO BE INSTALLED ON DOORS TO TR SPACES IDENTIFIED AS PART OF THIS SCOPE. 6. FIRE RATED WALLS ARE BASED ON OWNER PROVIDED DRAWINGS, FIRE RATED WALLS ARE BASED ON OWNER PROVIDED DRAWINGS, PROVIDED FOR REFERENCE, AND HAVE NOT BEEN VERIFIED. 7. REFERENCE MECHANICAL DRAWINGS FOR ROOF PENETRATION DETAILS. REFERENCE MECHANICAL DRAWINGS FOR ROOF PENETRATION DETAILS. 8. CONTRACTOR SHALL ENSURE ALL DOORS WITHIN AREAS OF WORK CONTRACTOR SHALL ENSURE ALL DOORS WITHIN AREAS OF WORK SWING FREE OVER FLOORING AND TRANSITION STRIPS.

AutoCAD SHX Text 2 REMOVE EXISTING FLOOR FINISHES AND BASE. PREPARE REMOVE EXISTING FLOOR FINISHES AND BASE. PREPARE SURFACES FOR NEW UPGRADES. COORDINATE WITH NEW FLOOR PLAN. 3 LINE OF NEW PARTITION. COORDINATE WITH NEW FLOOR PLAN. LINE OF NEW PARTITION. COORDINATE WITH NEW FLOOR PLAN. 4 DOOR TO REMAIN. DOOR TO REMAIN. 5 DEMOLITION OF WALLS AND CEILING AS REQUIRED FOR DEMOLITION OF WALLS AND CEILING AS REQUIRED FOR MECHANICAL/PLUMBING WORK. SEE MECHANICAL/PLUMBING SHEETS. 6 NO DEMOLITION IN THIS AREA NO DEMOLITION IN THIS AREA 7 REMOVE DOOR, FRAME, HARDWARE, SILL AND JAMB. REMOVE DOOR, FRAME, HARDWARE, SILL AND JAMB. 8 PREPARE AREA FOR NEW DOOR WITH OPPOSITE SWING. PREPARE AREA FOR NEW DOOR WITH OPPOSITE SWING. 9 DEMOLITION OF WALL AS REQUIRED FOR NEW CONSTRUCTION. DEMOLITION OF WALL AS REQUIRED FOR NEW CONSTRUCTION. PATCH AND REPAIR ADJACENT SURFACES TO MATCH 10 EXTENT OF DEMOLITION, VIF. EXTENT OF DEMOLITION, VIF. 11 DEMOLITION OF BULKHEAD. DEMOLITION OF BULKHEAD. 12 DEMOLITION OF EXISTING CEILING. PATCH, REPAIR AND CLEAN DEMOLITION OF EXISTING CEILING. PATCH, REPAIR AND CLEAN ALL SURFACES TO REMAIN EXPOSED 13 EXISTING WINDOW TO REMAIN. DEMOLISH TRIM AND PREPARE EXISTING WINDOW TO REMAIN. DEMOLISH TRIM AND PREPARE WINDOW FOR FILM AND CONCEALMENT. 14 PARTIAL DEMOLITION OF CEILING AS REQUIRED FOR NEW PARTIAL DEMOLITION OF CEILING AS REQUIRED FOR NEW CONSTRUCTION.

AutoCAD SHX Text

1 AREA OF WORKAREA OF WORK

AutoCAD SHX Text

KEYNOTES

AutoCAD SHX Text

NOT ALL NOTES MAY BE APPLICABLE

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A-005.1

AutoCAD SHX Text 2,3,4

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 109B

AutoCAD SHX Text

TR

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 109A

AutoCAD SHX Text

LOGISTICS

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text 109B

AutoCAD SHX Text

TR

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 109A

AutoCAD SHX Text

LOGISTICS

AutoCAD SHX Text

AutoCAD SHX Text C3

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 109B

AutoCAD SHX Text

TR

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 109A

AutoCAD SHX Text

LOGISTICS

AutoCAD SHX Text

AutoCAD SHX Text ONE HOUR FIRE RATED PARTITION TWO HOUR RATED FIRE PARTITION SMOKE PARTITION ONE HOUR RATED FIRE/SMOKE PARTITION FOUR HOUR RATED PARTITION FIRE EXTINGUISHER / FIRE EXTINGUISHER CABINET

EHRM INFRASTRUCTURE UPGRADES

www.atriaxgroup.com

Atriax, pllc 102 3rd Avenue, NE PO Box 1629, Hickory, NC 28603 Phone: 828.315.9962 Fax: 828.315.9964

NC Engineering License No.: P-0214 NC Architectural License No.: 51254 07/14/2022

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Fi le

P at h 6/

/2

:3

9:

P M

100% CONSTRUCTION

DOCUMENTS

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PhaseARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

Project Director

Revisions: Date:

Wiley|Wilson 127 Nationwide Drive Lynchburg, VA 24502 Phone: 434.947.1901 www.wileywilson.com

FOR OFFICIAL USE ONLY (FOUO)

FOR OFFICIAL USE ONLY (FOUO)

Specialized Engineering Solutions 1300 Baxter Street, Suite 355 Charlotte, NC 28204

NORT H CA ROL I N

A

E

DW

ARD H . HENSO

N

H

I CKORY , N . C

RE

G

IS

TERED ARCHITECT

BUILDING 5 LEVEL 02

DEMO PLAN / NEW FLOOR PLAN / RCP

A-005.2

MM/TRTG

CONSTRUCTION ACTIVITY® RISK LEVEL

INFECTION CONTROL MATRIX

TYPE “A” TYPE “B” TYPE “C” TYPE “D”

GROUP 1 I II II III / IV

GROUP 2

GROUP 3

GROUP 4

I II IV

I III III / IV IV

III III / IV III / IV IV

TEMPORARY PARTITION WALL APPROPRIATE

FOR INTERIM MEASURE CLASS. COORDINATE

WITH COR.

SHADED SELECTION APPLIES TO AREA OF WORK

AS INDICATED BY THE GROUP RISK LEVEL. REFER

TO SHEET GI102 FOR ICRA GUIDELINES.

GROUP 0 0 0 0 0

III

119 SF / 11.1 m²

VERTICAL

SPACE

STAIR

RCC202R

120 SF / 11.2 m²

VERTICAL

SPACE

ELEV

RCC203R

218 SF / 20.3 m²

VERTICAL SPACE

STAIR

RCC206R

926 SF / 86 m²

EDUCATION

STAGE

RCC204R

171 SF / 15.9 m²

VERTICAL SPACE

STAIR

RCC205R

637 SF / 59.2 m²

EDUCATION

LOBBY

160 SF / 14.9 m²

EDUCATION

WOMENS BATH

172 SF / 16 m²

EDUCATION

MENS BATH

31 SF / 2.9 m²

ENGINEERING

285 SF / 26.4 m²

EDUCATION

GREEN RM

89 SF / 8.2 m²

EDUCATION

STOR

243 SF / 22.6 m²

EDUCATION

STOR

2,834 SF / 263.3 m²

EDUCATION

MAIN HALL

193 SF / 17.9 m²

EDUCATION

KITCHEN

192 SF / 17.9 m²

EDUCATION

LOBBY

281 SF / 26.1 m²

COMMON

CORR

RCC201R

13 SF / 1.2 m²

VERTICAL SPACE

CHASE

RCC202C

15 SF / 1.4 m²

VERTICAL SPACE

CHASE

RCC201C

FECFE

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/8" = 1'-0"

AutoCAD SHX Text

OVERALL FLOOR PLAN

AutoCAD SHX Text

LEVEL 02

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

DEMOLITION FLOOR PLAN

AutoCAD SHX Text

LEVEL 02

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

REFLECTED CEILING PLAN

AutoCAD SHX Text

LEVEL 02

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

NEW FLOOR PLAN

AutoCAD SHX Text

LEVEL 02

AutoCAD SHX Text 15 AREA FOR NEW TELECOM INFRASTRUCTURE, ELECTRICAL, AREA FOR NEW TELECOM INFRASTRUCTURE, ELECTRICAL, UPS, BMS INTERFACES, AND HVAC UPGRADES. 16 PARTITION TO REMAIN. REPAIR, PATCH AND/OR FILL PARTITION TO REMAIN. REPAIR, PATCH AND/OR FILL OPENINGS AS NECESSARY DUE TO CONSTRUCTION. 17 NEW CARD READER. SEE DOOR SCHEDULE, COORDINATE NEW CARD READER. SEE DOOR SCHEDULE, COORDINATE WITH ELECTRICAL. 18 EXTEND WALLS TO THE UNDERSIDE OF THE STRUCTURAL EXTEND WALLS TO THE UNDERSIDE OF THE STRUCTURAL DECK. MATCH WALLS TO EXITING WIDTH. 19 NEW PARTITION WALL EXTENDING TO DECK/LID ABOVE. NEW PARTITION WALL EXTENDING TO DECK/LID ABOVE. MATCH EXISTING FINISHES. 20 NEW DOOR, FRAME, HARDWARE, SILL AND JAMB. NEW DOOR, FRAME, HARDWARE, SILL AND JAMB. 21 PROVIDE HIGHER LEVEL OF FINISHES TO MATCH EXISTING. PROVIDE HIGHER LEVEL OF FINISHES TO MATCH EXISTING. 22 EXISTING WINDOW TO REMAIN. CLEAN AND APPLY BLACKOUTEXISTING WINDOW TO REMAIN. CLEAN AND APPLY BLACKOUTFILM. ENCLOSE WINDOW WITH METAL STUD AND " GYPSUM58" GYPSUMBOARD FINISHED FLUSH TO ADJACENT SURFACES. PROVIDE TWO 4"X8" VENTS, ONE EACH AT HEAD AND SILL. 4"X8" VENTS, ONE EACH AT HEAD AND SILL. 23 WALL MOUNTED TELECOM EQUIPMENT. WALL MOUNTED TELECOM EQUIPMENT. 24 ONE (1) LAYER " FIRE TREATED PLYWOOD OVER EXISTING ONE (1) LAYER " FIRE TREATED PLYWOOD OVER EXISTING 34" FIRE TREATED PLYWOOD OVER EXISTING AND NEW CONSTRUCTION TO BRACE EQUIPMENT. PLYWOOD TO BE CUT TO FIT AROUND EXISTING EQUIPMENT. PLYWOOD TO RECEIVE 2 COATS OF FIRE RESISTANT PAINT. REF. FINISH SCHEDULE ON A-601. 25 REINSTALL DOOR, FRAME, HARDWARE, SILL AND JAMB. REINSTALL DOOR, FRAME, HARDWARE, SILL AND JAMB. 26 PATCH AND REPAIR TO MATCH EXISTING AS REQUIRED FOR PATCH AND REPAIR TO MATCH EXISTING AS REQUIRED FOR NEW MECHANICAL/PLUMBING WORK. SEEMECHANICAL/PLUMBING SHEETS. 27 EXPOSED / OPEN TO STRUCTURE. CLEAN AS REQUIRED. EXPOSED / OPEN TO STRUCTURE. CLEAN AS REQUIRED. 28 EXISTING CEILING TO REMAIN. EXISTING CEILING TO REMAIN. 29 PATCH AND REPAIR EXISTING CEILING TO MATCH. PATCH AND REPAIR EXISTING CEILING TO MATCH. 30 CONSTRUCT NEW GYP. BD. CEILING AND/OR LID. CONSTRUCT NEW GYP. BD. CEILING AND/OR LID. 31 PROVIDE FLOOR, BASE AND WALL FINISHES TO MATCH PROVIDE FLOOR, BASE AND WALL FINISHES TO MATCH EXISTING ADJACENT SURFACES 32 DEMOLISH EXISTING WINDOW. ENCLOSE OPENING TO MATCH DEMOLISH EXISTING WINDOW. ENCLOSE OPENING TO MATCH EXISTING STRUCTURE AND FINISH TO MATCH.

AutoCAD SHX Text GENERAL NOTES 1. ALL DIMENSIONS ARE MEASURED FROM FACE OF EXISTING WALL TO ALL DIMENSIONS ARE MEASURED FROM FACE OF EXISTING WALL TO THE FACE OF NEW WALL UNLESS NOTED OTHERWISE. 2. FOR PARTITION TYPES AND DETAILS SEE SHEET A-301. ALL NEW FOR PARTITION TYPES AND DETAILS SEE SHEET A-301. ALL NEW WALLS SHALL BE WALL TYPE C3 UNO. 3. SEE FINISH SCHEDULE ON SHEET A-601. SEE FINISH SCHEDULE ON SHEET A-601. 4. ALL TELECOM ROOMS AND DATA CENTER SHALL RECEIVE 12X12 ESD ALL TELECOM ROOMS AND DATA CENTER SHALL RECEIVE 12X12 ESD CONDUCTIVE STATIC CONTROL RESILIENT FLOOR TILE. BASIS OF DESIGN IS ROPPE ESD #701 NEUTRON. ALTERNATIVES MAY BE SUGGESTED BY THE CONTRACTOR AND REQUIRE VA COR APPROVAL. 5. AUTOMATIC DOOR CLOSERS TO BE INSTALLED ON DOORS TO TR AUTOMATIC DOOR CLOSERS TO BE INSTALLED ON DOORS TO TR SPACES IDENTIFIED AS PART OF THIS SCOPE. 6. FIRE RATED WALLS ARE BASED ON OWNER PROVIDED DRAWINGS, FIRE RATED WALLS ARE BASED ON OWNER PROVIDED DRAWINGS, PROVIDED FOR REFERENCE, AND HAVE NOT BEEN VERIFIED. 7. REFERENCE MECHANICAL DRAWINGS FOR ROOF PENETRATION DETAILS. REFERENCE MECHANICAL DRAWINGS FOR ROOF PENETRATION DETAILS. 8. CONTRACTOR SHALL ENSURE ALL DOORS WITHIN AREAS OF WORK CONTRACTOR SHALL ENSURE ALL DOORS WITHIN AREAS OF WORK SWING FREE OVER FLOORING AND TRANSITION STRIPS.

AutoCAD SHX Text 2 REMOVE EXISTING FLOOR FINISHES AND BASE. PREPARE REMOVE EXISTING FLOOR FINISHES AND BASE. PREPARE SURFACES FOR NEW UPGRADES. COORDINATE WITH NEW FLOOR PLAN. 3 LINE OF NEW PARTITION. COORDINATE WITH NEW FLOOR PLAN. LINE OF NEW PARTITION. COORDINATE WITH NEW FLOOR PLAN. 4 DOOR TO REMAIN. DOOR TO REMAIN. 5 DEMOLITION OF WALLS AND CEILING AS REQUIRED FOR DEMOLITION OF WALLS AND CEILING AS REQUIRED FOR MECHANICAL/PLUMBING WORK. SEE MECHANICAL/PLUMBING SHEETS. 6 NO DEMOLITION IN THIS AREA NO DEMOLITION IN THIS AREA 7 REMOVE DOOR, FRAME, HARDWARE, SILL AND JAMB. REMOVE DOOR, FRAME, HARDWARE, SILL AND JAMB. 8 PREPARE AREA FOR NEW DOOR WITH OPPOSITE SWING. PREPARE AREA FOR NEW DOOR WITH OPPOSITE SWING. 9 DEMOLITION OF WALL AS REQUIRED FOR NEW CONSTRUCTION. DEMOLITION OF WALL AS REQUIRED FOR NEW CONSTRUCTION. PATCH AND REPAIR ADJACENT SURFACES TO MATCH 10 EXTENT OF DEMOLITION, VIF. EXTENT OF DEMOLITION, VIF. 11 DEMOLITION OF BULKHEAD. DEMOLITION OF BULKHEAD. 12 DEMOLITION OF EXISTING CEILING. PATCH, REPAIR AND CLEAN DEMOLITION OF EXISTING CEILING. PATCH, REPAIR AND CLEAN ALL SURFACES TO REMAIN EXPOSED 13 EXISTING WINDOW TO REMAIN. DEMOLISH TRIM AND PREPARE EXISTING WINDOW TO REMAIN. DEMOLISH TRIM AND PREPARE WINDOW FOR FILM AND CONCEALMENT. 14 PARTIAL DEMOLITION OF CEILING AS REQUIRED FOR NEW PARTIAL DEMOLITION OF CEILING AS REQUIRED FOR NEW CONSTRUCTION.

AutoCAD SHX Text

1 AREA OF WORKAREA OF WORK

AutoCAD SHX Text

KEYNOTES

AutoCAD SHX Text

NOT ALL NOTES MAY BE APPLICABLE

AutoCAD SHX Text

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

TRUE

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A-005.2

AutoCAD SHX Text 2,3,4

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

TR

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

TR

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text C3

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

TR

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

ONE HOUR FIRE RATED PARTITION TWO HOUR RATED FIRE PARTITION SMOKE PARTITION ONE HOUR RATED FIRE/SMOKE PARTITION FOUR HOUR RATED PARTITION FIRE EXTINGUISHER / FIRE EXTINGUISHER CABINET

EHRM INFRASTRUCTURE UPGRADES

www.atriaxgroup.com

Atriax, pllc 102 3rd Avenue, NE PO Box 1629, Hickory, NC 28603 Phone: 828.315.9962 Fax: 828.315.9964

NC Engineering License No.: P-0214 NC Architectural License No.: 51254 07/14/2022

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Fi le

P at h 6/

/2

:3

9:

P M

100% CONSTRUCTION

DOCUMENTS

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PhaseARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

Project Director

Revisions: Date:

Wiley|Wilson 127 Nationwide Drive Lynchburg, VA 24502 Phone: 434.947.1901 www.wileywilson.com

FOR OFFICIAL USE ONLY (FOUO)

FOR OFFICIAL USE ONLY (FOUO)

Specialized Engineering Solutions 1300 Baxter Street, Suite 355 Charlotte, NC 28204

NORT H CA ROL I N

A

E

DW

ARD H . HENSO

N

H

I CKORY , N . C

RE

G

IS

TERED ARCHITECT

BUILDING 5 LEVEL 03

DEMO PLAN / NEW FLOOR PLAN / RCP

A-005.3

MM/TRTG

CONSTRUCTION ACTIVITY® RISK LEVEL

INFECTION CONTROL MATRIX

TYPE “A” TYPE “B” TYPE “C” TYPE “D”

GROUP 1 I II II III / IV

GROUP 2

GROUP 3

GROUP 4

I II IV

I III III / IV IV

III III / IV III / IV IV

TEMPORARY PARTITION WALL APPROPRIATE

FOR INTERIM MEASURE CLASS. COORDINATE

WITH COR.

SHADED SELECTION APPLIES TO AREA OF WORK

AS INDICATED BY THE GROUP RISK LEVEL. REFER

TO SHEET GI102 FOR ICRA GUIDELINES.

GROUP 0 0 0 0 0

III

214 SF / 19.8 m²

COMMON

CORR

RCC301R

129 SF / 12 m²

MED MEDIA

PROJECTOR RM

35 SF / 3.2 m²

VERT. SPACE

STAIR

RCC303R

48 SF / 4.5 m²

VERT. SPACE

STAIR

RCC302R

39 SF / 3.6 m²

MED MEDIA

300A

145 SF / 13.4 m²

TENANT SPACE

I G

127 SF / 11.8 m²

TENANT SPACE

I G

301A 163 SF / 15.2 m²

TENANT SPACE

I G

69 SF / 6.4 m²

TENANT SPACE

I G

95 SF / 8.8 m²

TENANT SPACE

STOR

258 SF / 24 m²

TENANT SPACE

I G

95 SF / 8.9 m²

TENANT SPACE

I G

142 SF / 13.1 m²

TENANT SPACE

I G

143 SF / 13.3 m²

TENANT SPACE

I G

428 SF / 39.8 m²

EDUCATION

BALCONY

126 SF / 11.7 m²

EDUCATION

STOR

11 SF / 1 m²

VERTICAL SPACE

CHASE

RCC301C

93 SF / 8.7 m²

EDUCATION

310A

33 SF / 3.1 m²

EDUCATION

STOR

84 SF / 7.8 m²

EDUCATION

STOR

103 SF / 9.6 m²

EDUCATION

STOR

312A

126 SF / 11.7 m²

EDUCATION

STOR

312B

82 SF / 7.6 m²

EDUCATION

STOR

29 SF / 2.7 m²

EDUCATION

STOR

86 SF / 8 m²

EDUCATION

STOR

OPEN TO BELOW

24 SF / 2.3 m²

VERTICAL SPACE

CHASE

RCC302C

OPEN TO BELOW

FECFE

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/8" = 1'-0"

AutoCAD SHX Text

OVERALL FLOOR PLAN

AutoCAD SHX Text

LEVEL 03

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

DEMOLTION FLOOR PLAN

AutoCAD SHX Text

LEVEL 03

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

REFLECTED CEILING PLAN

AutoCAD SHX Text

LEVEL 03

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

NEW FLOOR PLAN

AutoCAD SHX Text

LEVEL 03

AutoCAD SHX Text 15 AREA FOR NEW TELECOM INFRASTRUCTURE, ELECTRICAL, AREA FOR NEW TELECOM INFRASTRUCTURE, ELECTRICAL, UPS, BMS INTERFACES, AND HVAC UPGRADES. 16 PARTITION TO REMAIN. REPAIR, PATCH AND/OR FILL PARTITION TO REMAIN. REPAIR, PATCH AND/OR FILL OPENINGS AS NECESSARY DUE TO CONSTRUCTION. 17 NEW CARD READER. SEE DOOR SCHEDULE, COORDINATE NEW CARD READER. SEE DOOR SCHEDULE, COORDINATE WITH ELECTRICAL. 18 EXTEND WALLS TO THE UNDERSIDE OF THE STRUCTURAL EXTEND WALLS TO THE UNDERSIDE OF THE STRUCTURAL DECK. MATCH WALLS TO EXITING WIDTH. 19 NEW PARTITION WALL EXTENDING TO DECK/LID ABOVE. NEW PARTITION WALL EXTENDING TO DECK/LID ABOVE. MATCH EXISTING FINISHES. 20 NEW DOOR, FRAME, HARDWARE, SILL AND JAMB. NEW DOOR, FRAME, HARDWARE, SILL AND JAMB. 21 PROVIDE HIGHER LEVEL OF FINISHES TO MATCH EXISTING. PROVIDE HIGHER LEVEL OF FINISHES TO MATCH EXISTING. 22 EXISTING WINDOW TO REMAIN. CLEAN AND APPLY BLACKOUTEXISTING WINDOW TO REMAIN. CLEAN AND APPLY BLACKOUTFILM. ENCLOSE WINDOW WITH METAL STUD AND " GYPSUM58" GYPSUMBOARD FINISHED FLUSH TO ADJACENT SURFACES. PROVIDE TWO 4"X8" VENTS, ONE EACH AT HEAD AND SILL. 4"X8" VENTS, ONE EACH AT HEAD AND SILL. 23 WALL MOUNTED TELECOM EQUIPMENT. WALL MOUNTED TELECOM EQUIPMENT. 24 ONE (1) LAYER " FIRE TREATED PLYWOOD OVER EXISTING ONE (1) LAYER " FIRE TREATED PLYWOOD OVER EXISTING 34" FIRE TREATED PLYWOOD OVER EXISTING AND NEW CONSTRUCTION TO BRACE EQUIPMENT. PLYWOOD TO BE CUT TO FIT AROUND EXISTING EQUIPMENT. PLYWOOD TO RECEIVE 2 COATS OF FIRE RESISTANT PAINT. REF. FINISH SCHEDULE ON A-601. 25 REINSTALL DOOR, FRAME, HARDWARE, SILL AND JAMB. REINSTALL DOOR, FRAME, HARDWARE, SILL AND JAMB. 26 PATCH AND REPAIR TO MATCH EXISTING AS REQUIRED FOR PATCH AND REPAIR TO MATCH EXISTING AS REQUIRED FOR NEW MECHANICAL/PLUMBING WORK. SEEMECHANICAL/PLUMBING SHEETS. 27 EXPOSED / OPEN TO STRUCTURE. CLEAN AS REQUIRED. EXPOSED / OPEN TO STRUCTURE. CLEAN AS REQUIRED. 28 EXISTING CEILING TO REMAIN. EXISTING CEILING TO REMAIN. 29 PATCH AND REPAIR EXISTING CEILING TO MATCH. PATCH AND REPAIR EXISTING CEILING TO MATCH. 30 CONSTRUCT NEW GYP. BD. CEILING AND/OR LID. CONSTRUCT NEW GYP. BD. CEILING AND/OR LID. 31 PROVIDE FLOOR, BASE AND WALL FINISHES TO MATCH PROVIDE FLOOR, BASE AND WALL FINISHES TO MATCH EXISTING ADJACENT SURFACES 32 DEMOLISH EXISTING WINDOW. ENCLOSE OPENING TO MATCH DEMOLISH EXISTING WINDOW. ENCLOSE OPENING TO MATCH EXISTING STRUCTURE AND FINISH TO MATCH.

AutoCAD SHX Text GENERAL NOTES 1. ALL DIMENSIONS ARE MEASURED FROM FACE OF EXISTING WALL TO ALL DIMENSIONS ARE MEASURED FROM FACE OF EXISTING WALL TO THE FACE OF NEW WALL UNLESS NOTED OTHERWISE. 2. FOR PARTITION TYPES AND DETAILS SEE SHEET A-301. ALL NEW FOR PARTITION TYPES AND DETAILS SEE SHEET A-301. ALL NEW WALLS SHALL BE WALL TYPE C3 UNO. 3. SEE FINISH SCHEDULE ON SHEET A-601. SEE FINISH SCHEDULE ON SHEET A-601. 4. ALL TELECOM ROOMS AND DATA CENTER SHALL RECEIVE 12X12 ESD ALL TELECOM ROOMS AND DATA CENTER SHALL RECEIVE 12X12 ESD CONDUCTIVE STATIC CONTROL RESILIENT FLOOR TILE. BASIS OF DESIGN IS ROPPE ESD #701 NEUTRON. ALTERNATIVES MAY BE SUGGESTED BY THE CONTRACTOR AND REQUIRE VA COR APPROVAL. 5. AUTOMATIC DOOR CLOSERS TO BE INSTALLED ON DOORS TO TR AUTOMATIC DOOR CLOSERS TO BE INSTALLED ON DOORS TO TR SPACES IDENTIFIED AS PART OF THIS SCOPE. 6. FIRE RATED WALLS ARE BASED ON OWNER PROVIDED DRAWINGS, FIRE RATED WALLS ARE BASED ON OWNER PROVIDED DRAWINGS, PROVIDED FOR REFERENCE, AND HAVE NOT BEEN VERIFIED. 7. REFERENCE MECHANICAL DRAWINGS FOR ROOF PENETRATION DETAILS. REFERENCE MECHANICAL DRAWINGS FOR ROOF PENETRATION DETAILS. 8. CONTRACTOR SHALL ENSURE ALL DOORS WITHIN AREAS OF WORK CONTRACTOR SHALL ENSURE ALL DOORS WITHIN AREAS OF WORK SWING FREE OVER FLOORING AND TRANSITION STRIPS.

AutoCAD SHX Text 2 REMOVE EXISTING FLOOR FINISHES AND BASE. PREPARE REMOVE EXISTING FLOOR FINISHES AND BASE. PREPARE SURFACES FOR NEW UPGRADES. COORDINATE WITH NEW FLOOR PLAN. 3 LINE OF NEW PARTITION. COORDINATE WITH NEW FLOOR PLAN. LINE OF NEW PARTITION. COORDINATE WITH NEW FLOOR PLAN. 4 DOOR TO REMAIN. DOOR TO REMAIN. 5 DEMOLITION OF WALLS AND CEILING AS REQUIRED FOR DEMOLITION OF WALLS AND CEILING AS REQUIRED FOR MECHANICAL/PLUMBING WORK. SEE MECHANICAL/PLUMBING SHEETS. 6 NO DEMOLITION IN THIS AREA NO DEMOLITION IN THIS AREA 7 REMOVE DOOR, FRAME, HARDWARE, SILL AND JAMB. REMOVE DOOR, FRAME, HARDWARE, SILL AND JAMB. 8 PREPARE AREA FOR NEW DOOR WITH OPPOSITE SWING. PREPARE AREA FOR NEW DOOR WITH OPPOSITE SWING. 9 DEMOLITION OF WALL AS REQUIRED FOR NEW CONSTRUCTION. DEMOLITION OF WALL AS REQUIRED FOR NEW CONSTRUCTION. PATCH AND REPAIR ADJACENT SURFACES TO MATCH 10 EXTENT OF DEMOLITION, VIF. EXTENT OF DEMOLITION, VIF. 11 DEMOLITION OF BULKHEAD. DEMOLITION OF BULKHEAD. 12 DEMOLITION OF EXISTING CEILING. PATCH, REPAIR AND CLEAN DEMOLITION OF EXISTING CEILING. PATCH, REPAIR AND CLEAN ALL SURFACES TO REMAIN EXPOSED 13 EXISTING WINDOW TO REMAIN. DEMOLISH TRIM AND PREPARE EXISTING WINDOW TO REMAIN. DEMOLISH TRIM AND PREPARE WINDOW FOR FILM AND CONCEALMENT. 14 PARTIAL DEMOLITION OF CEILING AS REQUIRED FOR NEW PARTIAL DEMOLITION OF CEILING AS REQUIRED FOR NEW CONSTRUCTION.

AutoCAD SHX Text

1 AREA OF WORKAREA OF WORK

AutoCAD SHX Text

KEYNOTES

AutoCAD SHX Text

NOT ALL NOTES MAY BE APPLICABLE

AutoCAD SHX Text

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

TRUE

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A-005.3

AutoCAD SHX Text 2,3,4

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

TR

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

TR

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

TR

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

ONE HOUR FIRE RATED PARTITION TWO HOUR RATED FIRE PARTITION SMOKE PARTITION ONE HOUR RATED FIRE/SMOKE PARTITION FOUR HOUR RATED PARTITION FIRE EXTINGUISHER / FIRE EXTINGUISHER CABINET

EHRM INFRASTRUCTURE UPGRADES

www.atriaxgroup.com

Atriax, pllc 102 3rd Avenue, NE PO Box 1629, Hickory, NC 28603 Phone: 828.315.9962 Fax: 828.315.9964

NC Engineering License No.: P-0214 NC Architectural License No.: 51254 07/14/2022

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Fi le

P at h 6/

/2

:3

9:

P M

100% CONSTRUCTION

DOCUMENTS

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PhaseARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

Project Director

Revisions: Date:

Wiley|Wilson 127 Nationwide Drive Lynchburg, VA 24502 Phone: 434.947.1901 www.wileywilson.com

FOR OFFICIAL USE ONLY (FOUO)

FOR OFFICIAL USE ONLY (FOUO)

Specialized Engineering Solutions 1300 Baxter Street, Suite 355 Charlotte, NC 28204

NORT H CA ROL I N

A

E

DW

ARD H . HENSO

N

H

I CKORY , N . C

RE

G

IS

TERED ARCHITECT

BUILDING 6 - LEVEL 01

DEMO PLAN / NEW FLOOR PLAN / RCP

A-006.1

MM/TRTG

CONSTRUCTION ACTIVITY® RISK LEVEL

INFECTION CONTROL MATRIX

TYPE “A” TYPE “B” TYPE “C” TYPE “D”

GROUP 1 I II II III / IV

GROUP 2

GROUP 3

GROUP 4

I II IV

I III III / IV IV

III III / IV III / IV IV

TEMPORARY PARTITION WALL APPROPRIATE

FOR INTERIM MEASURE CLASS. COORDINATE

WITH COR.

SHADED SELECTION APPLIES TO AREA OF WORK

AS INDICATED BY THE GROUP RISK LEVEL. REFER

TO SHEET GI102 FOR ICRA GUIDELINES.

GROUP 0 0 0 0 0

III

331 SF / 30.7 m²

ENGINEERING

MECH RM

188 SF / 17.5 m²

HUMAN RESRC SVC

PIV

126 SF / 11.7 m²

COMMON

TLT

119 SF / 11.1 m²

COMMON

TLT

104 47 SF / 4.4 m²

COMMON

TLT

104A

36 SF / 3.4 m²

TENANT SPACE

HAC

96 SF / 8.9 m²

COMMON

TLT

81 SF / 7.5 m²

ENGINEERING

ELEC CLOS

118A 173 SF / 16.1 m²

HUMAN RESRC SVC

CHIEF OFFICE

135 SF / 12.5 m²

HUMAN RESRC SVC

OFF

108A

175 SF / 16.3 m²

HUMAN RESRC SVC

OFF

531 SF / 49.3 m²

ON-SITE LAUNDRY

LAUNDRY UNIT

26 SF / 2.4 m²

HUMAN RESRC SVC

STOR

RCC107R

345 SF / 32.1 m²

PRIMARY CARE

OFF

389 SF / 36.1 m²

COMMON

HALL - 1

51 SF / 4.7 m²

COMMON

VEST

165 SF / 15.3 m²

HUMAN RESRC SVC

OFF

167 SF / 15.5 m²

HUMAN RESRC

SVC

OFF

322 SF / 29.9 m²

HUMAN RESRC SVC

OFF

35 SF / 3.2 m²

COMMON

TEL

321 SF / 29.9 m²

COMMON

HALL - 2

97 SF / 9 m²

COMMON

HALL - 3

32 SF / 3 m²

COMMON

ELEC

141 SF / 13.1 m²

COMMON

VEST

117 SF / 10.8 m²

HUMAN RESRC

SVC

345 SF / 32.1 m²

PRIMARY CARE

OFF

74 SF / 6.9 m²

HUMAN RESRC SVC

BRK RM

RCC105R

46 SF / 4.3 m²

HUMAN RESRC SVC

TLT

RCC106R

9 SF / 0.8 m²

VERTICAL SPACE

CHASE

RCC101C

143 SF / 13.3 m²

PRIMARY CARE

EMPLOYEE

HEALTH

RCC103R

172 SF / 16 m²

PRIMARY CARE

EMPLOYEE HEALTH

RCC108R

148 SF / 13.7 m²

ENGINEERING

MECHANICAL

AREA

RCC101R

210 SF / 19.5 m²

HUMAN RESRC SVC

PIV

RCC104R

92 SF / 8.6 m²

HUMAN RESRC SVC

PIV

RCC102R

519 SF / 48.2 m²

HUMAN RESRC

SVC

214 SF / 19.9 m²

HUMAN RESRC

SVC

138 SF / 12.8 m²

HUMAN RESRC

SVC

FE

FECFE

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

TRUE

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/8" = 1'-0"

AutoCAD SHX Text

OVERALL FLOOR PLAN

AutoCAD SHX Text

LEVEL 01

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

DEMO FLOOR PLAN

AutoCAD SHX Text

LEVEL 01

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

RCP FLOOR PLAN

AutoCAD SHX Text

LEVEL 01

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

NEW FLOOR PLAN

AutoCAD SHX Text

LEVEL 01

AutoCAD SHX Text 15 AREA FOR NEW TELECOM INFRASTRUCTURE, ELECTRICAL, AREA FOR NEW TELECOM INFRASTRUCTURE, ELECTRICAL, UPS, BMS INTERFACES, AND HVAC UPGRADES. 16 PARTITION TO REMAIN. REPAIR, PATCH AND/OR FILL PARTITION TO REMAIN. REPAIR, PATCH AND/OR FILL OPENINGS AS NECESSARY DUE TO CONSTRUCTION. 17 NEW CARD READER. SEE DOOR SCHEDULE, COORDINATE NEW CARD READER. SEE DOOR SCHEDULE, COORDINATE WITH ELECTRICAL. 18 EXTEND WALLS TO THE UNDERSIDE OF THE STRUCTURAL EXTEND WALLS TO THE UNDERSIDE OF THE STRUCTURAL DECK. MATCH WALLS TO EXITING WIDTH. 19 NEW PARTITION WALL EXTENDING TO DECK/LID ABOVE. NEW PARTITION WALL EXTENDING TO DECK/LID ABOVE. MATCH EXISTING FINISHES. 20 NEW DOOR, FRAME, HARDWARE, SILL AND JAMB. NEW DOOR, FRAME, HARDWARE, SILL AND JAMB. 21 PROVIDE HIGHER LEVEL OF FINISHES TO MATCH EXISTING. PROVIDE HIGHER LEVEL OF FINISHES TO MATCH EXISTING. 22 EXISTING WINDOW TO REMAIN. CLEAN AND APPLY BLACKOUTEXISTING WINDOW TO REMAIN. CLEAN AND APPLY BLACKOUTFILM. ENCLOSE WINDOW WITH METAL STUD AND " GYPSUM58" GYPSUMBOARD FINISHED FLUSH TO ADJACENT SURFACES. PROVIDE TWO 4"X8" VENTS, ONE EACH AT HEAD AND SILL. 4"X8" VENTS, ONE EACH AT HEAD AND SILL. 23 WALL MOUNTED TELECOM EQUIPMENT. WALL MOUNTED TELECOM EQUIPMENT. 24 ONE (1) LAYER " FIRE TREATED PLYWOOD OVER EXISTING ONE (1) LAYER " FIRE TREATED PLYWOOD OVER EXISTING 34" FIRE TREATED PLYWOOD OVER EXISTING AND NEW CONSTRUCTION TO BRACE EQUIPMENT. PLYWOOD TO BE CUT TO FIT AROUND EXISTING EQUIPMENT. PLYWOOD TO RECEIVE 2 COATS OF FIRE RESISTANT PAINT. REF. FINISH SCHEDULE ON A-601. 25 REINSTALL DOOR, FRAME, HARDWARE, SILL AND JAMB. REINSTALL DOOR, FRAME, HARDWARE, SILL AND JAMB. 26 PATCH AND REPAIR TO MATCH EXISTING AS REQUIRED FOR PATCH AND REPAIR TO MATCH EXISTING AS REQUIRED FOR NEW MECHANICAL/PLUMBING WORK. SEEMECHANICAL/PLUMBING SHEETS. 27 EXPOSED / OPEN TO STRUCTURE. CLEAN AS REQUIRED. EXPOSED / OPEN TO STRUCTURE. CLEAN AS REQUIRED. 28 EXISTING CEILING TO REMAIN. EXISTING CEILING TO REMAIN. 29 PATCH AND REPAIR EXISTING CEILING TO MATCH. PATCH AND REPAIR EXISTING CEILING TO MATCH. 30 CONSTRUCT NEW GYP. BD. CEILING AND/OR LID. CONSTRUCT NEW GYP. BD. CEILING AND/OR LID. 31 PROVIDE FLOOR, BASE AND WALL FINISHES TO MATCH PROVIDE FLOOR, BASE AND WALL FINISHES TO MATCH EXISTING ADJACENT SURFACES 32 DEMOLISH EXISTING WINDOW. ENCLOSE OPENING TO MATCH DEMOLISH EXISTING WINDOW. ENCLOSE OPENING TO MATCH EXISTING STRUCTURE AND FINISH TO MATCH.

AutoCAD SHX Text GENERAL NOTES 1. ALL DIMENSIONS ARE MEASURED FROM FACE OF EXISTING WALL TO ALL DIMENSIONS ARE MEASURED FROM FACE OF EXISTING WALL TO THE FACE OF NEW WALL UNLESS NOTED OTHERWISE. 2. FOR PARTITION TYPES AND DETAILS SEE SHEET A-301. ALL NEW FOR PARTITION TYPES AND DETAILS SEE SHEET A-301. ALL NEW WALLS SHALL BE WALL TYPE C3 UNO. 3. SEE FINISH SCHEDULE ON SHEET A-601. SEE FINISH SCHEDULE ON SHEET A-601. 4. ALL TELECOM ROOMS AND DATA CENTER SHALL RECEIVE 12X12 ESD ALL TELECOM ROOMS AND DATA CENTER SHALL RECEIVE 12X12 ESD CONDUCTIVE STATIC CONTROL RESILIENT FLOOR TILE. BASIS OF DESIGN IS ROPPE ESD #701 NEUTRON. ALTERNATIVES MAY BE SUGGESTED BY THE CONTRACTOR AND REQUIRE VA COR APPROVAL. 5. AUTOMATIC DOOR CLOSERS TO BE INSTALLED ON DOORS TO TR AUTOMATIC DOOR CLOSERS TO BE INSTALLED ON DOORS TO TR SPACES IDENTIFIED AS PART OF THIS SCOPE. 6. FIRE RATED WALLS ARE BASED ON OWNER PROVIDED DRAWINGS, FIRE RATED WALLS ARE BASED ON OWNER PROVIDED DRAWINGS, PROVIDED FOR REFERENCE, AND HAVE NOT BEEN VERIFIED. 7. REFERENCE MECHANICAL DRAWINGS FOR ROOF PENETRATION DETAILS. REFERENCE MECHANICAL DRAWINGS FOR ROOF PENETRATION DETAILS. 8. CONTRACTOR SHALL ENSURE ALL DOORS WITHIN AREAS OF WORK CONTRACTOR SHALL ENSURE ALL DOORS WITHIN AREAS OF WORK SWING FREE OVER FLOORING AND TRANSITION STRIPS.

AutoCAD SHX Text 2 REMOVE EXISTING FLOOR FINISHES AND BASE. PREPARE REMOVE EXISTING FLOOR FINISHES AND BASE. PREPARE SURFACES FOR NEW UPGRADES. COORDINATE WITH NEW FLOOR PLAN. 3 LINE OF NEW PARTITION. COORDINATE WITH NEW FLOOR PLAN. LINE OF NEW PARTITION. COORDINATE WITH NEW FLOOR PLAN. 4 DOOR TO REMAIN. DOOR TO REMAIN. 5 DEMOLITION OF WALLS AND CEILING AS REQUIRED FOR DEMOLITION OF WALLS AND CEILING AS REQUIRED FOR MECHANICAL/PLUMBING WORK. SEE MECHANICAL/PLUMBING SHEETS. 6 NO DEMOLITION IN THIS AREA NO DEMOLITION IN THIS AREA 7 REMOVE DOOR, FRAME, HARDWARE, SILL AND JAMB. REMOVE DOOR, FRAME, HARDWARE, SILL AND JAMB. 8 PREPARE AREA FOR NEW DOOR WITH OPPOSITE SWING. PREPARE AREA FOR NEW DOOR WITH OPPOSITE SWING. 9 DEMOLITION OF WALL AS REQUIRED FOR NEW CONSTRUCTION. DEMOLITION OF WALL AS REQUIRED FOR NEW CONSTRUCTION. PATCH AND REPAIR ADJACENT SURFACES TO MATCH 10 EXTENT OF DEMOLITION, VIF. EXTENT OF DEMOLITION, VIF. 11 DEMOLITION OF BULKHEAD. DEMOLITION OF BULKHEAD. 12 DEMOLITION OF EXISTING CEILING. PATCH, REPAIR AND CLEAN DEMOLITION OF EXISTING CEILING. PATCH, REPAIR AND CLEAN ALL SURFACES TO REMAIN EXPOSED 13 EXISTING WINDOW TO REMAIN. DEMOLISH TRIM AND PREPARE EXISTING WINDOW TO REMAIN. DEMOLISH TRIM AND PREPARE WINDOW FOR FILM AND CONCEALMENT. 14 PARTIAL DEMOLITION OF CEILING AS REQUIRED FOR NEW PARTIAL DEMOLITION OF CEILING AS REQUIRED FOR NEW CONSTRUCTION.

AutoCAD SHX Text

1 AREA OF WORKAREA OF WORK

AutoCAD SHX Text

KEYNOTES

AutoCAD SHX Text

NOT ALL NOTES MAY BE APPLICABLE

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A-006.1

AutoCAD SHX Text 2,3,4

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 110A

AutoCAD SHX Text

TR

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

EXT'G. CEILING VENT TO BE REMOVED

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 110A

AutoCAD SHX Text

TR

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text C3

AutoCAD SHX Text C3

AutoCAD SHX Text

AutoCAD SHX Text A-006.1A

AutoCAD SHX Text

AutoCAD SHX Text A-006.1A

AutoCAD SHX Text

AutoCAD SHX Text A-006.1A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

CG

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 110A

AutoCAD SHX Text

TR

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A-006.1A

AutoCAD SHX Text

ONE HOUR FIRE RATED PARTITION TWO HOUR RATED FIRE PARTITION SMOKE PARTITION ONE HOUR RATED FIRE/SMOKE PARTITION FOUR HOUR RATED PARTITION FIRE EXTINGUISHER / FIRE EXTINGUISHER CABINET

EHRM INFRASTRUCTURE UPGRADES

www.atriaxgroup.com

Atriax, pllc 102 3rd Avenue, NE PO Box 1629, Hickory, NC 28603 Phone: 828.315.9962 Fax: 828.315.9964

NC Engineering License No.: P-0214 NC Architectural License No.: 51254 07/14/2022

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Fi le

P at h 6/

/2

:3

9:

P M

100% CONSTRUCTION

DOCUMENTS

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PhaseARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

Project Director

Revisions: Date:

Wiley|Wilson 127 Nationwide Drive Lynchburg, VA 24502 Phone: 434.947.1901 www.wileywilson.com

FOR OFFICIAL USE ONLY (FOUO)

FOR OFFICIAL USE ONLY (FOUO)

Specialized Engineering Solutions 1300 Baxter Street, Suite 355 Charlotte, NC 28204

NORT H CA ROL I N

A

E

DW

ARD H . HENSO

N

H

I CKORY , N . C

RE

G

IS

TERED ARCHITECT

BUILDING 6 - LEVEL 01

SECTIONS, DETAILS & ELEVATIONS

A-006.1A

MM/TRTG

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

TRUE

AutoCAD SHX Text 15 AREA FOR NEW TELECOM INFRASTRUCTURE, ELECTRICAL, AREA FOR NEW TELECOM INFRASTRUCTURE, ELECTRICAL, UPS, BMS INTERFACES, AND HVAC UPGRADES. 16 PARTITION TO REMAIN. REPAIR, PATCH AND/OR FILL PARTITION TO REMAIN. REPAIR, PATCH AND/OR FILL OPENINGS AS NECESSARY DUE TO CONSTRUCTION. 17 NEW CARD READER. SEE DOOR SCHEDULE, COORDINATE NEW CARD READER. SEE DOOR SCHEDULE, COORDINATE WITH ELECTRICAL. 18 EXTEND WALLS TO THE UNDERSIDE OF THE STRUCTURAL EXTEND WALLS TO THE UNDERSIDE OF THE STRUCTURAL DECK. MATCH WALLS TO EXITING WIDTH. 19 NEW PARTITION WALL EXTENDING TO DECK/LID ABOVE. NEW PARTITION WALL EXTENDING TO DECK/LID ABOVE. MATCH EXISTING FINISHES. 20 NEW DOOR, FRAME, HARDWARE, SILL AND JAMB. NEW DOOR, FRAME, HARDWARE, SILL AND JAMB. 21 PROVIDE HIGHER LEVEL OF FINISHES TO MATCH EXISTING. PROVIDE HIGHER LEVEL OF FINISHES TO MATCH EXISTING. 22 EXISTING WINDOW TO REMAIN. CLEAN AND APPLY BLACKOUTEXISTING WINDOW TO REMAIN. CLEAN AND APPLY BLACKOUTFILM. ENCLOSE WINDOW WITH METAL STUD AND " GYPSUM58" GYPSUMBOARD FINISHED FLUSH TO ADJACENT SURFACES. PROVIDE TWO 4"X8" VENTS, ONE EACH AT HEAD AND SILL. 4"X8" VENTS, ONE EACH AT HEAD AND SILL. 23 WALL MOUNTED TELECOM EQUIPMENT. WALL MOUNTED TELECOM EQUIPMENT. 24 ONE (1) LAYER " FIRE TREATED PLYWOOD OVER EXISTING ONE (1) LAYER " FIRE TREATED PLYWOOD OVER EXISTING 34" FIRE TREATED PLYWOOD OVER EXISTING AND NEW CONSTRUCTION TO BRACE EQUIPMENT. PLYWOOD TO BE CUT TO FIT AROUND EXISTING EQUIPMENT. PLYWOOD TO RECEIVE 2 COATS OF FIRE RESISTANT PAINT. REF. FINISH SCHEDULE ON A-601. 25 REINSTALL DOOR, FRAME, HARDWARE, SILL AND JAMB. REINSTALL DOOR, FRAME, HARDWARE, SILL AND JAMB. 26 PATCH AND REPAIR TO MATCH EXISTING AS REQUIRED FOR PATCH AND REPAIR TO MATCH EXISTING AS REQUIRED FOR NEW MECHANICAL/PLUMBING WORK. SEEMECHANICAL/PLUMBING SHEETS. 27 EXPOSED / OPEN TO STRUCTURE. CLEAN AS REQUIRED. EXPOSED / OPEN TO STRUCTURE. CLEAN AS REQUIRED. 28 EXISTING CEILING TO REMAIN. EXISTING CEILING TO REMAIN. 29 PATCH AND REPAIR EXISTING CEILING TO MATCH. PATCH AND REPAIR EXISTING CEILING TO MATCH. 30 CONSTRUCT NEW GYP. BD. CEILING AND/OR LID. CONSTRUCT NEW GYP. BD. CEILING AND/OR LID. 31 PROVIDE FLOOR, BASE AND WALL FINISHES TO MATCH PROVIDE FLOOR, BASE AND WALL FINISHES TO MATCH EXISTING ADJACENT SURFACES 32 DEMOLISH EXISTING WINDOW. ENCLOSE OPENING TO MATCH DEMOLISH EXISTING WINDOW. ENCLOSE OPENING TO MATCH EXISTING STRUCTURE AND FINISH TO MATCH.

AutoCAD SHX Text GENERAL NOTES 1. ALL DIMENSIONS ARE MEASURED FROM FACE OF EXISTING WALL TO ALL DIMENSIONS ARE MEASURED FROM FACE OF EXISTING WALL TO THE FACE OF NEW WALL UNLESS NOTED OTHERWISE. 2. FOR PARTITION TYPES AND DETAILS SEE SHEET A-301. ALL NEW FOR PARTITION TYPES AND DETAILS SEE SHEET A-301. ALL NEW WALLS SHALL BE WALL TYPE C3 UNO. 3. SEE FINISH SCHEDULE ON SHEET A-601. SEE FINISH SCHEDULE ON SHEET A-601. 4. ALL TELECOM ROOMS AND DATA CENTER SHALL RECEIVE 12X12 ESD ALL TELECOM ROOMS AND DATA CENTER SHALL RECEIVE 12X12 ESD CONDUCTIVE STATIC CONTROL RESILIENT FLOOR TILE. BASIS OF DESIGN IS ROPPE ESD #701 NEUTRON. ALTERNATIVES MAY BE SUGGESTED BY THE CONTRACTOR AND REQUIRE VA COR APPROVAL. 5. AUTOMATIC DOOR CLOSERS TO BE INSTALLED ON DOORS TO TR AUTOMATIC DOOR CLOSERS TO BE INSTALLED ON DOORS TO TR SPACES IDENTIFIED AS PART OF THIS SCOPE. 6. FIRE RATED WALLS ARE BASED ON OWNER PROVIDED DRAWINGS, FIRE RATED WALLS ARE BASED ON OWNER PROVIDED DRAWINGS, PROVIDED FOR REFERENCE, AND HAVE NOT BEEN VERIFIED. 7. REFERENCE MECHANICAL DRAWINGS FOR ROOF PENETRATION DETAILS. REFERENCE MECHANICAL DRAWINGS FOR ROOF PENETRATION DETAILS. 8. CONTRACTOR SHALL ENSURE ALL DOORS WITHIN AREAS OF WORK CONTRACTOR SHALL ENSURE ALL DOORS WITHIN AREAS OF WORK SWING FREE OVER FLOORING AND TRANSITION STRIPS.

AutoCAD SHX Text 2 REMOVE EXISTING FLOOR FINISHES AND BASE. PREPARE REMOVE EXISTING FLOOR FINISHES AND BASE. PREPARE SURFACES FOR NEW UPGRADES. COORDINATE WITH NEW FLOOR PLAN. 3 LINE OF NEW PARTITION. COORDINATE WITH NEW FLOOR PLAN. LINE OF NEW PARTITION. COORDINATE WITH NEW FLOOR PLAN. 4 DOOR TO REMAIN. DOOR TO REMAIN. 5 DEMOLITION OF WALLS AND CEILING AS REQUIRED FOR DEMOLITION OF WALLS AND CEILING AS REQUIRED FOR MECHANICAL/PLUMBING WORK. SEE MECHANICAL/PLUMBING SHEETS. 6 NO DEMOLITION IN THIS AREA NO DEMOLITION IN THIS AREA 7 REMOVE DOOR, FRAME, HARDWARE, SILL AND JAMB. REMOVE DOOR, FRAME, HARDWARE, SILL AND JAMB. 8 PREPARE AREA FOR NEW DOOR WITH OPPOSITE SWING. PREPARE AREA FOR NEW DOOR WITH OPPOSITE SWING. 9 DEMOLITION OF WALL AS REQUIRED FOR NEW CONSTRUCTION. DEMOLITION OF WALL AS REQUIRED FOR NEW CONSTRUCTION. PATCH AND REPAIR ADJACENT SURFACES TO MATCH 10 EXTENT OF DEMOLITION, VIF. EXTENT OF DEMOLITION, VIF. 11 DEMOLITION OF BULKHEAD. DEMOLITION OF BULKHEAD. 12 DEMOLITION OF EXISTING CEILING. PATCH, REPAIR AND CLEAN DEMOLITION OF EXISTING CEILING. PATCH, REPAIR AND CLEAN ALL SURFACES TO REMAIN EXPOSED 13 EXISTING WINDOW TO REMAIN. DEMOLISH TRIM AND PREPARE EXISTING WINDOW TO REMAIN. DEMOLISH TRIM AND PREPARE WINDOW FOR FILM AND CONCEALMENT. 14 PARTIAL DEMOLITION OF CEILING AS REQUIRED FOR NEW PARTIAL DEMOLITION OF CEILING AS REQUIRED FOR NEW CONSTRUCTION.

AutoCAD SHX Text

1 AREA OF WORKAREA OF WORK

AutoCAD SHX Text

KEYNOTES

AutoCAD SHX Text

NOT ALL NOTES MAY BE APPLICABLE

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 3/4" = 1'-0"

AutoCAD SHX Text

CROSS SECTION

AutoCAD SHX Text

LEVEL 01

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

ELEVATION 2

AutoCAD SHX Text

LEVEL 01

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

ELEVATION 3

AutoCAD SHX Text

LEVEL 01

AutoCAD SHX Text A-006.1A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 3" = 1'-0"

AutoCAD SHX Text

WALL SECTION DETAIL

AutoCAD SHX Text

EXT'G FLOOR

AutoCAD SHX Text

BATT INSULATION

AutoCAD SHX Text

FACE OF EXT'G. WALL ATTACH NEW FIRE RATED PLYWOOD PANEL TO EXISTING WALL

AutoCAD SHX Text

34" FIRE RATED PLYWOOD DECKING

AutoCAD SHX Text

8" - 16 GA. STEEL JOIST @ 24" O.C.

AutoCAD SHX Text

EXT'G. WALL BEYOND

AutoCAD SHX Text

MODIFY EXISTING CEILING SYSTEM TO FIT AROUND NEW TR

AutoCAD SHX Text

SCHEDULED WALL BASE

AutoCAD SHX Text

EXT'G. FLOOR

AutoCAD SHX Text

EXT'G. FLOOR

AutoCAD SHX Text

NEW ENTRY KEYPAD

AutoCAD SHX Text

NEW TR SPACE

AutoCAD SHX Text

MODIFY EXISTING CEILING SYSTEM TO FIT AROUND NEW TR

AutoCAD SHX Text

MODIFY EXISTING CEILING SYSTEM TO FIT AROUND NEW TR

AutoCAD SHX Text

3 " METAL STUDS @ 1'-4" O.C.58" METAL STUDS @ 1'-4" O.C.

AutoCAD SHX Text

INTERIOR

AutoCAD SHX Text

EXTERIOR

AutoCAD SHX Text

BATT INSULATION

AutoCAD SHX Text

58" TYPE X GYP. BD.

AutoCAD SHX Text

34" FIRE RATED PLYWD. INSTALLED VERTICALLY

34" FIRE RATED PLYWD.

EHRM INFRASTRUCTURE UPGRADES

www.atriaxgroup.com

Atriax, pllc 102 3rd Avenue, NE PO Box 1629, Hickory, NC 28603 Phone: 828.315.9962 Fax: 828.315.9964

NC Engineering License No.: P-0214 NC Architectural License No.: 51254 07/14/2022

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

Fi le

P at h 6/

/2

:3

9:

P M

100% CONSTRUCTION

DOCUMENTS

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PhaseARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

Project Director

Revisions: Date:

Wiley|Wilson 127 Nationwide Drive Lynchburg, VA 24502 Phone: 434.947.1901 www.wileywilson.com

FOR OFFICIAL USE ONLY (FOUO)

FOR OFFICIAL USE ONLY (FOUO)

Specialized Engineering Solutions 1300 Baxter Street, Suite 355 Charlotte, NC 28204

NORT H CA ROL I N

A

E

DW

ARD H . HENSO

N

H

I CKORY , N . C

RE

G

IS

TERED ARCHITECT

BUILDING 7 - LEVEL 01

DEMO PLAN / NEW FLOOR PLAN / RCP

A-007.1

MM/TRTG

CONSTRUCTION ACTIVITY® RISK LEVEL

INFECTION CONTROL MATRIX

TYPE “A” TYPE “B” TYPE “C” TYPE “D”

GROUP 1 I II II III / IV

GROUP 2

GROUP 3

GROUP 4

I II IV

I III III / IV IV

III III / IV III / IV IV

TEMPORARY PARTITION WALL APPROPRIATE

FOR INTERIM MEASURE CLASS. COORDINATE

WITH COR.

SHADED SELECTION APPLIES TO AREA OF WORK

AS INDICATED BY THE GROUP RISK LEVEL. REFER

TO SHEET GI102 FOR ICRA GUIDELINES.

GROUP 0 0 0 0 0

III

143 SF / 13.3 m²

LOGISTICS

OFF

RCC104R

137 SF / 12.7 m²

LOGISTICS

OFF

RCC105R

138 SF / 12.8 m²

LOGISTICS

OFF

RCC106R

153 SF / 14.2 m²

LOGISTICS

OFF

RCC107R

11,919 SF / 1,107.3 m²

LOGISTICS

WAREHOUSE

RCC102R

2,119 SF / 196.8 m²

LOGISTICS

WAREHOUSE

RCC102R

67 SF / 6.2 m²

LOGISTICS

MALE TLT

70 SF / 6.5 m²

LOGISTICS

FEMALE TLT

109 SF / 10.1 m²

LOGISTICS

VAULT

445 SF / 41.4 m²

LOGISTICS

OFF

70 SF / 6.5 m²

LOGISTICS

COLD RM

1,590 SF / 147.7 m²

LOGISTICS

NOT KNOWN

RCC101R

FE

FE

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

TRUE

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/8" = 1'-0"

AutoCAD SHX Text

OVERALL FLOOR PLAN

AutoCAD SHX Text

LEVEL 01

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

DEMO FLOOR PLAN

AutoCAD SHX Text

LEVEL 01

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

RCP FLOOR PLAN

AutoCAD SHX Text

LEVEL 01

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

NEW FLOOR PLAN

AutoCAD SHX Text

LEVEL 01

AutoCAD SHX Text 15 AREA FOR NEW TELECOM INFRASTRUCTURE, ELECTRICAL, AREA FOR NEW TELECOM INFRASTRUCTURE, ELECTRICAL, UPS, BMS INTERFACES, AND HVAC UPGRADES. 16 PARTITION TO REMAIN. REPAIR, PATCH AND/OR FILL PARTITION TO REMAIN. REPAIR, PATCH AND/OR FILL OPENINGS AS NECESSARY DUE TO CONSTRUCTION. 17 NEW CARD READER. SEE DOOR SCHEDULE, COORDINATE NEW CARD READER. SEE DOOR SCHEDULE, COORDINATE WITH ELECTRICAL. 18 EXTEND WALLS TO THE UNDERSIDE OF THE STRUCTURAL EXTEND WALLS TO THE UNDERSIDE OF THE STRUCTURAL DECK. MATCH WALLS TO EXITING WIDTH. 19 NEW PARTITION WALL EXTENDING TO DECK/LID ABOVE. NEW PARTITION WALL EXTENDING TO DECK/LID ABOVE. MATCH EXISTING FINISHES. 20 NEW DOOR, FRAME, HARDWARE, SILL AND JAMB. NEW DOOR, FRAME, HARDWARE, SILL AND JAMB. 21 PROVIDE HIGHER LEVEL OF FINISHES TO MATCH EXISTING. PROVIDE HIGHER LEVEL OF FINISHES TO MATCH EXISTING. 22 EXISTING WINDOW TO REMAIN. CLEAN AND APPLY BLACKOUTEXISTING WINDOW TO REMAIN. CLEAN AND APPLY BLACKOUTFILM. ENCLOSE WINDOW WITH METAL STUD AND " GYPSUM58" GYPSUMBOARD FINISHED FLUSH TO ADJACENT SURFACES. PROVIDE TWO 4"X8" VENTS, ONE EACH AT HEAD AND SILL. 4"X8" VENTS, ONE EACH AT HEAD AND SILL. 23 WALL MOUNTED TELECOM EQUIPMENT. WALL MOUNTED TELECOM EQUIPMENT. 24 ONE (1) LAYER " FIRE TREATED PLYWOOD OVER EXISTING ONE (1) LAYER " FIRE TREATED PLYWOOD OVER EXISTING 34" FIRE TREATED PLYWOOD OVER EXISTING AND NEW CONSTRUCTION TO BRACE EQUIPMENT. PLYWOOD TO BE CUT TO FIT AROUND EXISTING EQUIPMENT. PLYWOOD TO RECEIVE 2 COATS OF FIRE RESISTANT PAINT. REF. FINISH SCHEDULE ON A-601. 25 REINSTALL DOOR, FRAME, HARDWARE, SILL AND JAMB. REINSTALL DOOR, FRAME, HARDWARE, SILL AND JAMB. 26 PATCH AND REPAIR TO MATCH EXISTING AS REQUIRED FOR PATCH AND REPAIR TO MATCH EXISTING AS REQUIRED FOR NEW MECHANICAL/PLUMBING WORK. SEEMECHANICAL/PLUMBING SHEETS. 27 EXPOSED / OPEN TO STRUCTURE. CLEAN AS REQUIRED. EXPOSED / OPEN TO STRUCTURE. CLEAN AS REQUIRED. 28 EXISTING CEILING TO REMAIN. EXISTING CEILING TO REMAIN. 29 PATCH AND REPAIR EXISTING CEILING TO MATCH. PATCH AND REPAIR EXISTING CEILING TO MATCH. 30 CONSTRUCT NEW GYP. BD. CEILING AND/OR LID. CONSTRUCT NEW GYP. BD. CEILING AND/OR LID. 31 PROVIDE FLOOR, BASE AND WALL FINISHES TO MATCH PROVIDE FLOOR, BASE AND WALL FINISHES TO MATCH EXISTING ADJACENT SURFACES 32 DEMOLISH EXISTING WINDOW. ENCLOSE OPENING TO MATCH DEMOLISH EXISTING WINDOW. ENCLOSE OPENING TO MATCH EXISTING STRUCTURE AND FINISH TO MATCH.

AutoCAD SHX Text GENERAL NOTES 1. ALL DIMENSIONS ARE MEASURED FROM FACE OF EXISTING WALL TO ALL DIMENSIONS ARE MEASURED FROM FACE OF EXISTING WALL TO THE FACE OF NEW WALL UNLESS NOTED OTHERWISE. 2. FOR PARTITION TYPES AND DETAILS SEE SHEET A-301. ALL NEW FOR PARTITION TYPES AND DETAILS SEE SHEET A-301. ALL NEW WALLS SHALL BE WALL TYPE C3 UNO. 3. SEE FINISH SCHEDULE ON SHEET A-601. SEE FINISH SCHEDULE ON SHEET A-601. 4. ALL TELECOM ROOMS AND DATA CENTER SHALL RECEIVE 12X12 ESD ALL TELECOM ROOMS AND DATA CENTER SHALL RECEIVE 12X12 ESD CONDUCTIVE STATIC CONTROL RESILIENT FLOOR TILE. BASIS OF DESIGN IS ROPPE ESD #701 NEUTRON. ALTERNATIVES MAY BE SUGGESTED BY THE CONTRACTOR AND REQUIRE VA COR APPROVAL. 5. AUTOMATIC DOOR CLOSERS TO BE INSTALLED ON DOORS TO TR AUTOMATIC DOOR CLOSERS TO BE INSTALLED ON DOORS TO TR SPACES IDENTIFIED AS PART OF THIS SCOPE. 6.