C revCAPSFANS Pinellas County Multi sites 122625 Order CPQ-1002875rev revCAPSFANS Pinellas County Multi sites 122625 Order CPQ-1002875rev

Thank you for your interest in Vertiv Corporation. We are pleased to submit the following proposal for your review and consideration.

As the rate of change and complexity in your data center increases, Vertiv is the dedicated partner that you need to help you achieve your goals.

Please complete all required fields on the signature page and attach your Purchase Order to assist timely order processing. Should you have any questions regarding the proposal, feel free to contact me directly at 678 448 7493. I look forward to your response and the opportunity to work together to improve your data center investment.

Sincerely, Lorra Palmieri

Lorra Palmieri

EMAIL Lpalmieri@joepowell.com

12/1/25

PINELLAS COUNTY

TOWER SITES

Barbara Hetrick Office: (727) 464-4673 Email: bhetrick@pinellas.gov mailto:bhetrick@pinellas.gov

TAX is not included in the pricing below any tax required must be included in customer purchase order

Payment Terms: Net 30 Days Payment Frequency: In full Invoicing Rule: After work completion

PRICING SUMMARY – CAPS/FANS/MODULE REPLACEMENT (pricing detail on following pages)

Liebert UPS / Power / Battery Services:

• We are the Original Equipment Manufacturer and the experts on Liebert equipment with access to updates and changes, knowledge of engineering specifications, current issues and how to fix them correctly.

• Our factory trained service force is twice the size of the next largest competitor with over 650 customer engineers and field technicians in the United States alone; everywhere in the US the most knowledgeable engineers and technicians available, will cover you.

• With the most advanced tooling and instrumentation available, each CE has over $10,000 in gear with him at all times, so any issue can be resolved in the least amount of time possible.

• To make sure we get the right part to the right place at the right time, we have the industry’s most sophisticated parts logistics system. No matter where you are in the US we also have a parts warehouse close to serve you.

• We maintain and follow all safety and compliance regulations necessary to keep CE’s from harm and protect you, our customers from liability. We care about your safety.

Liebert UPS Capacitor and Fan Replacement Services:Replacement of all DC Capacitors.

• Replacement of all Fans and Blowers

• Replacement of all AC Input, Output Capacitors.

Progress billing: For all projects involving capacitor replacement, progress payments may apply. Invoices will be issued per the following project milestones:

Milestone Payment Due Shipment of capacitors Total amount for capacitors and freight Completion of installation and testing Balance of project price

PRICING DETAILS

Site#: 1180752 PINELLAS COUNTY RIDGECREST

12490 ULMERTON RD LARGO FL 33774

Tag # Description Model # Part Number Coverage Amount 2021525 EXM UPS 40KVA FULL UNIT MODULE REPLACEMENT WSTC 47SA040EACH04Q9 MODS208EXM40WSTC $19,654.00 2021525 EXM UPS 40KVA FULL UNIT FANS REPLACEMENT WSTC 47SA040EACH04Q9 FANS208EXM40WSTC $1,400.00 2021526 EXM UPS 40KVA FULL UNIT MODULE REPLACEMENT WSTC 47SA040EACH04Q9 MODS208EXM40WSTC $19,654.00 2021526 EXM UPS 40KVA FULL UNIT FANS REPLACEMENT WSTC 47SA040EACH04Q9 FANS208EXM40WSTC $1,400.00

Item Sub Total Price: $42,108.00

Site#: 1236364 PINELLAS COUNTY (COURTHOUSE)

315 CT ST CLEARWATER, FL 33756

2021718 EXM UPS 20KVA FULL UNIT MODULE REPLACEMENT WSTC 47SA020CACM0305 MODS208EXM20WSTC $12,710.00 2021718 EXM UPS 20KVA FULL UNIT FANS REPLACEMENT WSTC 47SA020CACM0305 FANS208EXM20WSTC $1,400.00 2021717 EXM UPS 20KVA FULL UNIT MODULE REPLACEMENT WSTC 47SA020CACM0305 MODS208EXM20WSTC $12,710.00 2021717 EXM UPS 20KVA FULL UNIT FANS REPLACEMENT WSTC 47SA020CACM0305 FANS208EXM20WSTC $1,400.00

Item Sub Total Price: $34,820.00

Site#: 1181001 PINELLAS CO SES

4100 DUNN DR PALM HARBOR, FL 34683

Tag # Description Model # Part Number Coverage Amount

2021696 APS 6 20KVA W/REDUNDANCY FULL UNIT MODULE REPLACMENT WSTC AS4D1NCYHNNX538 MODSAPS6FR30WSTC $11,044.00 2021696 APS FRAME 6 20KVA FAN REPLACEMENT WSTC AS4D1NCYHNNX538 FANSAPS6FR20WSTC $1,160.00 2024643 APS 6 20KVA W/REDUNDANCY FULL UNIT MODULE REPLACMENT WSTC AS4D0NCXG44X542 MODSAPS6FR30WSTC $11,044.00 2024643 APS FRAME 6 20KVA FAN REPLACEMENT WSTC AS4D0NCXG44X542 FANSAPS6FR20WSTC $1,160.00

18161119 APS 6 20KVA W/REDUNDANCY FULL UNIT MODULE REPLACMENT WSTC AS4D0NCYGNNXB09 MODSAPS6FR30WSTC $11,044.00 18161119 APS FRAME 6 20KVA FAN REPLACEMENT WSTC AS4D0NCYGNNXB09 FANSAPS6FR20WSTC $1,160.00 18161228 APS 6 20KVA W/REDUNDANCY FULL UNIT MODULE REPLACMENT WSTC AS4D0NCYGNNXB09 MODSAPS6FR30WSTC $11,044.00 18161228 APS FRAME 6 20KVA FAN REPLACEMENT WSTC AS4D0NCYGNNXB09 FANSAPS6FR20WSTC $1,160.00

Item Sub Total Price: $48,816.00

Site#: 2910981 PINELLAS COUNTY ELDRIDGE

3563 OLD KEYSTONE RD TARPON SPRINGS FL 34689

2021523 EXM UPS 40KVA FULL UNIT MODULE REPLACEMENT WSTC 47SA040EACH04Q9 MODS208EXM40WSTC $19,654.00 2021523 EXM UPS 40KVA FULL UNIT FANS REPLACEMENT WSTC 47SA040EACH04Q9 FANS208EXM40WSTC $1,400.00 2021524 EXM UPS 40KVA FULL UNIT MODULE REPLACEMENT WSTC 47SA040EACH04Q9 MODS208EXM40WSTC $19,654.00 2021524 EXM UPS 40KVA FULL UNIT FANS REPLACEMENT WSTC 47SA040EACH04Q9 FANS208EXM40WSTC $1,400.00

Site#: 1235260 PINELLAS CO HWY

22211 US HWY 19 N BLDG 1 CLEARWATER, FL 33765

42735081 APS 6 20KVA W/REDUNDANCY FULL UNIT MODULE REPLACMENT WSTC AS4D1NCYHNNX538 MODSAPS6FR30WSTC $11,044.00 42735081 APS FRAME 6 20KVA FAN REPLACEMENT WSTC AS4D1NCYHNNX538 FANSAPS6FR20WSTC $1,160.00 43439617 APS 6 20KVA W/REDUNDANCY FULL UNIT MODULE REPLACMENT WSTC AS4D0NCXG44X542 MODSAPS6FR30WSTC $11,044.00 43439617 APS FRAME 6 20KVA FAN REPLACEMENT WSTC AS4D0NCXG44X542 FANSAPS6FR20WSTC $1,160.00 2021699 APS 6 20KVA W/REDUNDANCY FULL UNIT MODULE REPLACMENT WSTC AS4D0NCYGNNXB09 MODSAPS6FR30WSTC $11,044.00 2021699 APS FRAME 6 20KVA FAN REPLACEMENT WSTC AS4D0NCYGNNXB09 FANSAPS6FR20WSTC $1,160.00 2021697 APS 6 20KVA W/REDUNDANCY FULL UNIT MODULE REPLACMENT WSTC AS4D0NCYGNNXB09 MODSAPS6FR30WSTC $11,044.00 2021697 APS FRAME 6 20KVA FAN REPLACEMENT WSTC AS4D0NCYGNNXB09 FANSAPS6FR20WSTC $1,160.00

Site#: 1189742 PINELLAS CO TOYTOWN

10540 16TH ST N ST PETERSBURG, FL 33716

2067545 APS 6 20KVA W/REDUNDANCY FULL UNIT MODULE REPLACMENT WSTC AS4D1NCYHNNX538 MODSAPS6FR30WSTC $11,044.00 2067545 APS FRAME 6 20KVA FAN REPLACEMENT WSTC AS4D1NCYHNNX538 FANSAPS6FR20WSTC $1,160.00 2021698 APS 6 20KVA W/REDUNDANCY FULL UNIT MODULE REPLACMENT WSTC AS4D0NCXG44X542 MODSAPS6FR30WSTC $11,044.00 2021698 APS FRAME 6 20KVA FAN REPLACEMENT WSTC AS4D0NCXG44X542 FANSAPS6FR20WSTC $1,160.00 2021713 APS 6 20KVA W/REDUNDANCY FULL UNIT MODULE REPLACMENT WSTC AS4D0NCYGNNXB09 MODSAPS6FR30WSTC $11,044.00 2021713 APS FRAME 6 20KVA FAN REPLACEMENT WSTC AS4D0NCYGNNXB09 FANSAPS6FR20WSTC $1,160.00 2021714 APS 6 20KVA W/REDUNDANCY FULL UNIT MODULE REPLACMENT WSTC AS4D0NCYGNNXB09 MODSAPS6FR30WSTC $11,044.00 2021714 APS FRAME 6 20KVA FAN REPLACEMENT WSTC AS4D0NCYGNNXB09 FANSAPS6FR20WSTC $1,160.00

Site#: 1305128 PINELLAS COUNTY FORT DESOTO

ANDERSON BLVD ST PETRSBURG FL 33715

2021527 EXM UPS 40KVA FULL UNIT MODULE REPLACEMENT WSTC 47SA040EACH04Q9 MODS208EXM40WSTC $19,654.00 2021527 EXM UPS 40KVA FULL UNIT FANS REPLACEMENT WSTC 47SA040EACH04Q9 FANS208EXM40WSTC $1,400.00 2021528 EXM UPS 40KVA FULL UNIT MODULE REPLACEMENT WSTC 47SA040EACH04Q9 MODS208EXM40WSTC $19,654.00 2021528 EXM UPS 40KVA FULL UNIT FANS REPLACEMENT WSTC 47SA040EACH04Q9 FANS208EXM40WSTC $1,400.00

Site#: 1180875 PINELLAS COUNTY MOTOROLA

1430 2ND AVE N ST PETRSBURG FL 33731

1849276 EXM UPS 40KVA FULL UNIT MODULE REPLACEMENT WSTC 47SA040EACH04Q9 MODS208EXM40WSTC $19,654.00 1849276 EXM UPS 40KVA FULL UNIT FANS REPLACEMENT WSTC 47SA040EACH04Q9 FANS208EXM40WSTC $1,400.00 1849277 EXM UPS 40KVA FULL UNIT MODULE REPLACEMENT WSTC 47SA040EACH04Q9 MODS208EXM40WSTC $19,654.00 1849277 EXM UPS 40KVA FULL UNIT FANS REPLACEMENT WSTC 47SA040EACH04Q9 FANS208EXM40WSTC $1,400.00

Site#: 1203741 PINELLAS COUNTY PUBLIC SAFETY COMPLEX

10750 ULMERTON RD LARGO, FL 33778

1667936 NX400-600 FULL UNIT MODULE & FAN REPLACEMENT WSTC 38SA500A0AGS413 MODSFANSNX600WSTC $99,200.00 1667937 NX400-600 FULL UNIT MODULE & FAN REPLACEMENT WSTC 38SA500A0AGS413 MODSFANSNX600WSTC $99,200.00

Item Sub Total Price: $198,400.00

SCOPE OF WORK

UNINTERRUPTIBLE POWER SYSTEMS

EXM UPS

FAN REPLACEMENT

SERVICE SUMMARY

Features Detail

Service Professional Performed by Vertiv factory-trained and authorized technician equipped with Vertiv Proprietary tools and software. Vertiv CEs and Vertiv Partners are the only approved OEM service providers for Vertiv products.

Fan Replacement Includes a complete replacement of all fans (all necessary labor, material, & shipping).

SERVICE PERFORMED

Fan Assembly Replacement Service

1. Verify new fans/blowers prior to installation.

2. Clean fan/blower assembly area of all dirt and debris.

3. Inspect wiring for loose connections and heat discoloration. Replace, if necessary.

4. Removal of existing fan assemblies from the unit.

5. Install replacement fan assemblies into the unit.

6. Ensure all fan connections are properly done and mechanical connections properly torqued.

7. Vertiv will package original fan assemblies for removal from the site.

8. Review system performance with customer to address any system questions.

ASSUMPTIONS AND CLARIFICATIONS

Service to be performed during the Annual preventive maintenance visit, as per the contract purchased on the UPS (excluding national holidays).

Change out can also be performed during a non-PM visit if customer agrees to shut down the equipment.

If a special visit was purchased, service is performed at the customer’s convenience, regardless of contract purchased on the UPS (excluding national holidays).

CUSTOMER RESPONSIBILITIES

To provide timely, accurate and thorough execution of the services described herein, Vertiv requests the following:

• Point of Contact: Provide an authorized point of contact(s), specific for the scope of work, for scheduling and coordination purposes.

• Scheduling: Make dates available for scheduling service. All visits must be requested 10 business days in advance of need by contacting the Vertiv Customer Resolution Center at 1-800-543-2378.

• Site Access: Prior to time of scheduled work, provide site access including any customer required escort, security clearance, safety training and badging for Vertiv service personnel.

• Equipment Access: Convenient access to the equipment covered by the Scope of Work. Prior to scheduled time of work, notify Vertiv service personnel of any special requirements for equipment access including lifts, ladders, etc.

• Shutdown: Service may require shutdown of load to ensure electrical connection integrity.

• Notification: If for any reason the work cannot be performed during scheduled time, notify Vertiv service personnel 24-hours prior to scheduled event.

TERMS AND CONDITIONS

Subject to all Terms & Conditions as noted in the Vertiv Terms & Conditions or the terms of a Master Agreement between the parties, if any, shall apply.

EXM UPS

MODULE REPLACEMENT

SERVICE SUMMARY

Feature Detail

Service Professional Performed by Vertiv factory-trained and authorized technician equipped with Vertiv Proprietary tools and software. Vertiv CEs and Vertiv Partners are the only approved OEM service providers for Vertiv products.

Cap Replacements Includes a complete replacement of all Power & Bypass Modules (all necessary labor, material, & shipping).

Module Replacement Service

1. Transfer the system to maintenance bypass, if applicable.

2. De-energize the unit.

3. Removal of all power and booster modules from the unit.

4. Install replacement power and booster modules into the unit.

5. Perform flashing and reprogramming to the unit.

6. Review system performance with customer to address any system questions.

ASSUMPTIONS AND CLARIFICATIONS

If no maintenance bypass is available, load shutdown maintenance will be required.

Service to be performed during the Annual preventive maintenance visit, as per the contract purchased on the UPS (excluding national holidays).

Change out can also be performed during a non-PM visit if customer agrees to shut down the equipment.

If a special visit was purchased, service is performed at the customer’s convenience, regardless of contract purchased on the UPS (excluding national holidays).

CUSTOMER RESPONSIBILITIES

To provide timely, accurate and thorough execution of the services described herein, Vertiv requests the following:

• Point of Contact: Provide an authorized point of contact(s), specific for the scope of work, for scheduling and coordination purposes.

• Scheduling: Make dates available for scheduling service. All visits must be requested 10 business days in advance of need by contacting the Vertiv Customer Resolution Center at 1-800-543-2378.

• Site Access: Prior to time of scheduled work, provide site access including any customer required escort, security clearance, safety training and badging for Vertiv service personnel.

• Equipment Access: Convenient access to the equipment covered by the Scope of Work. Prior to scheduled time of work, notify Vertiv service personnel of any special requirements for equipment access including lifts, ladders, etc.

• Shutdown: Service may require shutdown of load to ensure electrical connection integrity.

• Notification: If for any reason the work cannot be performed during scheduled time, notify Vertiv service personnel 24-hours prior to scheduled event.

TERMS AND CONDITIONS

Subject to all Terms & Conditions as noted in the Vertiv Terms & Conditions or the terms of a Master Agreement between the parties, if any, shall

APS UPS

Service Professional Performed by Vertiv factory-trained and authorized technician equipped with Vertiv Proprietary tools and software. Vertiv CEs and Vertiv Partners are the only approved OEM service providers for Vertiv products.

Fan Replacement Includes a complete replacement of all fans (all necessary labor, material, & shipping).

Fan Assembly Replacement Service

1. Verify new fans/blowers prior to installation.

2. Clean fan/blower assembly area of all dirt and debris.

3. Inspect wiring for loose connections and heat discoloration. Replace, if necessary.

4. Removal of existing fan assemblies from the unit.

5. Install replacement fan assemblies into the unit.

6. Ensure all fan connections are properly done and mechanical connections properly torqued.

7. Vertiv will package original fan assemblies for removal from the site.

8. Review system performance with customer to address any system questions.

ASSUMPTIONS AND CLARIFICATIONS

Service to be performed during the Annual preventive maintenance visit, as per the contract purchased on the UPS (excluding national holidays).

Change out can also be performed during a non-PM visit if customer agrees to shut down the equipment.

If a special visit was purchased, service is performed at the customer’s convenience, regardless of contract purchased on the UPS (excluding national holidays).

CUSTOMER RESPONSIBILITIES

To provide timely, accurate and thorough execution of the services described herein, Vertiv requests the following:

• Point of Contact: Provide an authorized point of contact(s), specific for the scope of work, for scheduling and coordination purposes.

• Scheduling: Make dates available for scheduling service. All visits must be requested 10 business days in advance of need by contacting the Vertiv Customer Resolution Center at 1-800-543-2378.

• Site Access: Prior to time of scheduled work, provide site access including any customer required escort, security clearance, safety training and badging for Vertiv service personnel.

• Equipment Access: Convenient access to the equipment covered by the Scope of Work. Prior to scheduled time of work, notify Vertiv service personnel of any special requirements for equipment access including lifts, ladders, etc.

• Shutdown: Service may require shutdown of load to ensure electrical connection integrity.

• Notification: If for any reason the work cannot be performed during scheduled time, notify Vertiv service personnel 24-hours prior to scheduled event.

TERMS AND CONDITIONS

Subject to all Terms & Conditions as noted in the Vertiv Terms & Conditions or the terms of a Master Agreement between the parties, if any, shall

APS UPS

MODULE REPLACEMENT

Feature Detail

Service Professional Performed by Vertiv factory-trained and authorized technician equipped with Vertiv Proprietary tools and software. Vertiv CEs and Vertiv Partners are the only approved OEM service providers for Vertiv products.

Cap Replacements Includes a complete replacement of all Power & Bypass Modules (all necessary labor, material, & shipping).

1. Transfer the system to maintenance bypass, if applicable.

2. De-energize the unit.

3. Removal of all power and booster modules from the unit.

4. Install replacement power and booster modules into the unit.

5. Perform flashing and reprogramming to the unit.

6. Review system performance with customer to address any system questions.

ASSUMPTIONS AND CLARIFICATIONS

If no maintenance bypass is available, load shutdown maintenance will be required.

Service to be performed during the Annual preventive maintenance visit, as per the contract purchased on the UPS (excluding national holidays).

Change out can also be performed during a non-PM visit if customer agrees to shut down the equipment.

If a special visit was purchased, service is performed at the customer’s convenience, regardless of contract purchased on the UPS (excluding national holidays).

CUSTOMER RESPONSIBILITIES

To provide timely, accurate and thorough execution of the services described herein, Vertiv requests the following:

• Point of Contact: Provide an authorized point of contact(s), specific for the scope of work, for scheduling and coordination purposes.

• Scheduling: Make dates available for scheduling service. All visits must be requested 10 business days in advance of need by contacting the Vertiv Customer Resolution Center at 1-800-543-2378.

• Site Access: Prior to time of scheduled work, provide site access including any customer required escort, security clearance, safety training and badging for Vertiv service personnel.

• Equipment Access: Convenient access to the equipment covered by the Scope of Work. Prior to scheduled time of work, notify Vertiv service personnel of any special requirements for equipment access including lifts, ladders, etc.

• Shutdown: Service may require shutdown of load to ensure electrical connection integrity.

• Notification: If for any reason the work cannot be performed during scheduled time, notify Vertiv service personnel 24-hours prior to scheduled event.

TERMS AND CONDITIONS

Subject to all Terms & Conditions as noted in the Vertiv Terms & Conditions or the terms of a Master Agreement between the parties, if any, shall

SERIES 300 AND NX 10-30 KVA MODELS ONLY

LIFE EXTENSION - DC CAPACITOR / FAN REPLACEMENT

SERVICE SUMMARY

Feature Detail

Service Professional Performed by Vertiv factory-trained and authorized technician equipped with Vertiv Proprietary tools and software. Vertiv CEs and Vertiv Partners are the only approved OEM service providers for Vertiv products.

Cap Replacements Includes a complete replacement of all DC capacitors (all necessary labor and material).

SERVICE PERFORMED

DC Capacitor and Fan Replacement Service

1. Check all nuts, bolts, screws, and connectors for tightness and heat discoloration.

2. Verify new capacitor values prior to installation.

3. Clean capacitor decks and buss bars of all dirt, debris, and/or leakage.

4. Record AC ripple voltage and current before, and after, capacitor replacement.

5. Replace DC buss filter capacitors.

6. Inspect DC capacitor wiring for loose connections and heat discoloration. Replace, if necessary.

7. Ensure all capacitor connections are properly torqued.

8. Record new capacitor date codes.

9. Form new DC capacitors.

10. Perform thermal scan of capacitor decks and connections.

11. Dispose of removed capacitors (upon request and at time of service).

12. Review system performance with customer to address any system questions.

ASSUMPTIONS AND CLARIFICATIONS

Service to be performed during the Annual preventive maintenance visit, as per the contract purchased on the UPS (excluding national holidays).

Change out can also be performed during a Semi-annual visit if customer agrees to shut down the equipment. If a special visit was purchased, service is performed at the customer’s convenience, regardless of contract purchased on the UPS (excluding national holidays).

CUSTOMER RESPONSIBILITIES

In order to provide timely, accurate and thorough execution of the services described herein, Vertiv requests the following:

• Point of Contact: Provide an authorized point of contact(s), specific for the scope of work, for scheduling and coordination purposes.

• Scheduling: Make dates available for scheduling service. All visits must be requested 10 business days in advance of need by contacting the Vertiv Customer Resolution Center at 1-800-543-2378.

• Site Access: Prior to time of scheduled work, provide site access including any customer required escort, security clearance, safety training and badging for Vertiv service personnel.

• Equipment Access: Convenient access to the equipment covered by the Scope of Work. Prior to scheduled time of work, notify Vertiv service personnel of any special requirements for equipment access including lifts, ladders, etc.

• Shutdown: Service may require shutdown of load to ensure electrical connection integrity.

• Notification: If for any reason the work cannot be performed during scheduled time, notify Vertiv service personnel 24-hours prior to scheduled event.

TERMS AND CONDITIONS

Subject to all Terms & Conditions as noted in the Vertiv Terms & Conditions or the terms of a Master Agreement between the parties, if any, shall

UNINTERRUPTIBLE POWER SYSTEMS NX225-600

MODULE REPLACEMENT

Feature Detail

Service Professional Performed by Vertiv factory-trained and authorized technician equipped with Vertiv Proprietary tools and software. Vertiv CEs and Vertiv Partners are the only approved OEM service providers for Vertiv products.

Cap Replacements Includes a complete replacement of all Power & Booster Modules (all necessary labor, material, & shipping).

1. Transfer the system to maintenance bypass, if applicable.

2. De-energize the unit.

3. Removal of all power and booster modules from the unit.

4. Install replacement power and booster modules into the unit.

5. Perform calibrations to the unit.

6. Vertiv will package original modules for removal from the site.

7. Review system performance with customer to address any system questions.

ASSUMPTIONS AND CLARIFICATIONS

If no maintenance bypass is available, load shutdown maintenance will be required.

Service to be performed during the Annual preventive maintenance visit, as per the contract purchased on the UPS (excluding national holidays).

Change out can also be performed during a non-PM visit if customer agrees to shut down the equipment.

If a special visit was purchased, service is performed at the customer’s convenience, regardless of contract purchased on the UPS (excluding national holidays).

CUSTOMER RESPONSIBILITIES

To provide timely, accurate and thorough execution of the services described herein, Vertiv requests the following:

• Point of Contact: Provide an authorized point of contact(s), specific for the scope of work, for scheduling and coordination purposes.

• Scheduling: Make dates available for scheduling service. All visits must be requested 10 business days in advance of need by contacting the Vertiv Customer Resolution Center at 1-800-543-2378.

• Site Access: Prior to time of scheduled work, provide site access including any customer required escort, security clearance, safety training and badging for Vertiv service personnel.

• Equipment Access: Convenient access to the equipment covered by the Scope of Work. Prior to scheduled time of work, notify Vertiv service personnel of any special requirements for equipment access including lifts, ladders, etc.

• Shutdown: Service may require shutdown of load to ensure electrical connection integrity.

• Notification: If for any reason the work cannot be performed during scheduled time, notify Vertiv service personnel 24-hours prior to scheduled event.

TERMS AND CONDITIONS

Subject to all Terms & Conditions as noted in the Vertiv Terms & Conditions or the terms of a Master Agreement between the parties, if any, shall

UNINTERRUPTIBLE POWER SYSTEMS EXM UPS

Service Professional Performed by Vertiv factory-trained and authorized technician equipped with Vertiv Proprietary tools and software. Vertiv CEs and Vertiv Partners are the only approved OEM service providers for Vertiv products.

Fan Replacement Includes a complete replacement of all fans (all necessary labor, material, & shipping).

SERVICE PERFORMED

Fan Assembly Replacement Service

1. Verify new fans/blowers prior to installation.

2. Clean fan/blower assembly area of all dirt and debris.

3. Inspect wiring for loose connections and heat discoloration. Replace, if necessary.

4. Removal of existing fan assemblies from the unit.

5. Install replacement fan assemblies into the unit.

6. Ensure all fan connections are properly done and mechanical connections properly torqued.

7. Vertiv will package original fan assemblies for removal from the site.

8. Review system performance with customer to address any system questions.

ASSUMPTIONS AND CLARIFICATIONS

Service to be performed during the Annual preventive maintenance visit, as per the contract purchased on the UPS (excluding national holidays).

Change out can also be performed during a non-PM visit if customer agrees to shut down the equipment.

If a special visit was purchased, service is performed at the customer’s convenience, regardless of contract purchased on the UPS (excluding national holidays).

CUSTOMER RESPONSIBILITIES

To provide timely, accurate and thorough execution of the services described herein, Vertiv requests the following:

• Point of Contact: Provide an authorized point of contact(s), specific for the scope of work, for scheduling and coordination purposes.

• Scheduling: Make dates available for scheduling service. All visits must be requested 10 business days in advance of need by contacting the Vertiv Customer Resolution Center at 1-800-543-2378.

• Site Access: Prior to time of scheduled work, provide site access including any customer required escort, security clearance, safety training and badging for Vertiv service personnel.

• Equipment Access: Convenient access to the equipment covered by the Scope of Work. Prior to scheduled time of work, notify Vertiv service personnel of any special requirements for equipment access including lifts, ladders, etc.

• Shutdown: Service may require shutdown of load to ensure electrical connection integrity.

• Notification: If for any reason the work cannot be performed during scheduled time, notify Vertiv service personnel 24-hours prior to scheduled event.

TERMS AND CONDITIONS

Subject to all Terms & Conditions as noted in the Vertiv Terms & Conditions or the terms of a Master Agreement between the parties, if any, shall

Order Number: CPQ-1002875-1

Purchase Order must be assigned to: Payment remittance address:

Vertiv Corporation Vertiv Corporation 505 N. Cleveland Avenue PO Box 70474 Westerville, OH 43082 Chicago, IL 60673

FID# 31-0715256

PO should be e-mailed with signed proposal to:

Vertiv Corporation c/o Lorra Palmieri Email: Lpalmieri@joepowell.com

Please complete the following information (All fields are required):

Purchase Order Number: ____________________________ Purchase Order attached: Yes No

If PO NOT attached, please specify reason: __________________________________________________________

Invoice Delivery Method: Web Billing (Attach Instructions) Mail Other_____________________________

Accounts Payable Email ______________________@___________________________

Billing Contact Person: _______________________________ Phone: ____________________________________

Email: ____________________________________________ Fax #: _____________________________________

Bill-To Company Name: ______________________________ Bill-To Address: _____________________________

Federal Tax ID # ____________________________________ Bill-To City, ST Zip: __________________________

Tax Exempt: Yes (Attach tax exempt certificate) No

Site Services/IT Contact Person:________________________ Phone: ____________________________________

* * COVERAGE DETAILS * *

For equipment not currently under a Service Agreement or for equipment for which the warranty has expired in excess of thirty (30) days, parts required to bring equipment back to manufacturers specifications are the responsibility of the Buyer and billable at the time of the first preventive maintenance visit or Service call. All pricing is valid only for Service coverage stated and is subject to change if this Proposal is modified in any way. This Proposal is valid for ninety (90) days from the date of this Proposal unless otherwise noted. INFORMATION TO BUYER: This order between the Buyer and Seller is limited to Seller’s Terms and Conditions located at termsconditions.vertivco.com unless a formal agreement governing this Purchase Order/transaction has been executed by the parties, in which case the Terms and Conditions of the signed agreement shall govern. Seller hereby objects to all Buyer’s terms and conditions received by Seller and/or issued by Buyer.

Signature of this agreement authorizes Seller to invoice for Services mentioned herein and to utilize the provided purchase order number. If a purchase order number is not used, then the Buyer authorizes and guarantees Seller the payment of such invoices by authority of the signature below.

Thank you for your business.

Proposed By: Accepted By:

Lorra Palmieri 11/26/2025 Lorra Palmieri Date Buyer Signature Required Date

Printed Name Title Phone

Requirement Details

Purchasing Company Information

• Provide your Company’s legal name and billing address

• For new Customers:

o Provide your Company’s W-9 with matching legal name and address o Complete a Credit Application Link if requesting credit

Vertiv Name and Address

• U.S. Orders:

o Vertiv Corporation

505 N. Cleveland Ave, Westerville, OH 43082

• Canadian Orders:

o Vertiv Canada ULC #7-3800B Laird Rd., Mississauga, ON L5L 0B2 Canada

– OR –

3001, rue Douglas B. Floreani, St. Laurent, QC, H4S 1Y7, Canada

Product and/or Services Ordered

• Include line-item detail with quantities for each product/service ordered

– OR –

• Provide an aggregate solution description with a reference to the Vertiv quote number

P.O. Order Value

• Line level pricing including a total purchase commitment value

– OR –

• Aggregate / total solution value only

Payment Terms • Specify payment terms or include a reference to an executed contract with Vertiv detailing repayment terms

Freight Terms

• Specify INCOTERMS or Freight terms to define if freight value is included in the P.O. value o Identify who is responsible for freight coordination and when title transfers

Tax Status

• Orders will be processed as taxable unless a “tax exempt” status is defined on the P.O. and a valid/current tax-exemption certificate is presented with P.O. or already on file with Vertiv

Requested Ship Date(s) • Unless expecting immediate or first available shipment date, include specific shipment timing requests

Ship to Address(es)

• Provide detailed shipping or handling instructions, including address for specific product shipments or service locations

Special Order Requirements

• Indicate any special requirements or instructions, such as:

o Formal approval of Submittals before order acceptance o Milestone Billing details (required either by Customer or Vertiv) o Special sourcing requirements such as DPAS (Defense Prioritization) or BAA (Build

America Act)

Vertiv Purchase Order Acceptance Requirements:

To ensure efficient order processing, Vertiv requests the following information be included with all purchase orders:

https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fna4-onlineapp.dnbi.com%2FcreateApp%2FVertiv%2BGroup%2BCorporation%3Ftoken%3DW804pUzF26hPM9pHn12oQA%253D%253D&data=05%7C01%7Cnarasinga.pediredla%40infosys.com%7C369737f50aa84161d7c008dbf4777766%7C63ce7d592f3e42cda8ccbe764cff5eb6%7C0%7C0%7C638372566214447175%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=HSr%2F6iU61usnoduRBx0qYDJ%2BqKq6hCi98NQTdcysEqg%3D&reserved=0

Vertiv Corporation

TERMS AND CONDITIONS OF SALE

Vertiv Corporation is herein referred to as the "Seller" and the customer or person or entity purchasing goods and/or services ("Goods") and/or parts required for services (“Parts”) or licensing software and/or firmware, which are preloaded, or to be used with Goods ("Software") from Seller is referred to as the "Buyer." These Terms and Conditions, any price list or schedule, quotation, acknowledgment, Seller’s scope or statement of work, or invoice from Seller relevant to the sale of the Goods, Parts and licensing of Software by Seller, and all associated terms, conditions and documents incorporated by specific reference herein or therein, constitute the complete and exclusive statement of the terms of the agreement (“Agreement”) governing the sale of Goods, Parts, and/or license of Software by Seller to Buyer. Any discrepancies between the terms of the above referenced documents shall be resolved by Seller. Seller’s acceptance of Buyer’s purchase order is expressly conditional on Buyer’s assent to all of Seller’s terms and conditions of sale, including terms and conditions that are different from or additional to the terms and conditions of Buyer’s purchase order. Buyer's acceptance of the Goods, Parts, and/or Software will manifest Buyer's assent to the terms of this Agreement. Seller reserves the right in its sole discretion to refuse orders.

1. PRICES: Unless otherwise specified in writing by Seller, the price quoted or specified by Seller for the Goods, Parts and/or Software shall remain in effect for ninety (90) days after the date of Seller's quotation, Seller’s scope of work or acknowledgment of Buyer's order for the Goods, whichever occurs first, provided an unconditional authorization from Buyer for the shipment or performance of the Goods and/or Parts, and/or Software is received and accepted by Seller within such time period. If such authorization is not received by Seller within such ninety (90) day period, Seller shall have the right to change the price for the Goods, Parts and/or Software to Seller's price for the Goods, Parts, and/or Software at the time of Seller’s shipment or performance thereof. All prices and licensee fees are exclusive of taxes, transportation and insurance, which are to be borne by Buyer. Seller reserves the right to correct any obvious errors in specifications or prices and, in the event of a force majeure event, make equitable adjustments in Seller’s price for the Goods, Parts, and/or Software prior to Seller’s shipment or performance thereof. Unless otherwise specified by Seller, Parts that are required for the performance of services will be furnished at Seller’s then-prevailing prices. A service charge of $19.99 will be added to all orders which, excluding shipping charges, taxes, and insurance, do not meet the minimum order value of $750.00. The service charge amount and/or minimum order value may be changed by Seller at any time, without notice.

2. TAXES: Any current or future tax, duty, tariff or governmental charge (or increase in same) affecting Seller's costs of production, sale, services or delivery or shipment of Goods Parts, and/or Software, or which Seller is otherwise required to pay or collect in connection with the sale, purchase, delivery, performance, storage, processing, use or consumption of Goods, Parts, and/or Software, shall be for Buyer's account and shall be added to the price or billed to Buyer separately, at Seller’s election.

3. TERMS OF PAYMENT: Unless otherwise specified by Seller, terms are net thirty (30) days from date of Seller's invoice in U.S. currency. Seller shall have the right, among other remedies, either to terminate this Agreement or to suspend further performance under this and/or other agreements with Buyer in the event Buyer fails to make any payment when due, which other agreements Buyer and Seller hereby amend accordingly. Buyer shall be liable for all expenses, including attorneys' fees, relating to the collection of past due amounts. If any payment owed to Seller is not paid when due, it shall bear interest, at a rate to be determined by Seller, which shall not exceed the maximum rate permitted by law, from the date on which it is due until it is paid. Seller may preserve its interests in payment by enforcing any applicable mechanic’s, labor, construction or similar lien rights. Should Buyer's financial responsibility become unsatisfactory to Seller, cash payments or security satisfactory to Seller may be required by Seller for future deliveries or performance of Goods, Parts, and/or Software. If such cash payment or security is not provided, in addition to Seller's other rights and remedies, Seller may discontinue deliveries or performance. Buyer hereby grants Seller a security interest in all Goods, Parts, and/or Software sold to Buyer by Seller, which security interest shall continue until all such Goods, Parts, and/or Software are fully paid for, and Buyer, upon Seller's demand, will execute and deliver to Seller such instruments as Seller requests to protect and perfect such security interest.

4. SHIPMENT AND DELIVERY: While Seller will use all reasonable commercial efforts to maintain the delivery date(s) and/or performance dates acknowledged or quoted by Seller, all shipping dates and/or performance dates are approximate and not guaranteed. Seller reserves the right to make partial shipments. Seller, at its option, shall not be bound to tender delivery of any Goods, Parts, and/or Software for which Buyer has not provided shipping instructions and other required information.

If the shipment or performance of the Goods, Parts, and/or Software is postponed or delayed by Buyer for any reason, Buyer agrees to reimburse Seller for any and all storage costs and other additional expenses resulting therefrom. For sales in which the end destination of the Goods, Parts, and/or Software is outside of the United States (except for those international sales to Seller’s affiliated companies), risk of loss and legal title to the Goods, Parts, and/or Software shall transfer to Buyer immediately after the Goods, Parts, and/or Software have passed beyond the territorial limits of the United States. For international sales to Seller’s affiliated companies, all shipments of Goods, Parts, and/or Software are made on a Delivered at Place (DAP) basis, per Incoterms 2020, with freight charges from Seller’s facility to destination terminal invoiced to buyer either on a Prepaid or PPD/Add basis, as agreed to by Seller and Buyer. All other shipments of Goods, Parts, and/or Software are made on an Ex Works (EXW) Seller’s Shipping Point basis, per Incoterms 2020, with Seller responsible to load goods on Buyer’s nominated vehicle. Any claims for shortages or damages suffered in transit are the responsibility of Buyer and shall be submitted by Buyer directly to the carrier.

Notwithstanding the above, risk of loss and legal title to Parts shall transfer to Buyer (i) upon delivery by the Seller, or (ii) at the time Parts are placed in storage due to Buyer’s delay or postponement.

Shortages or damages must be identified and signed for at the time of delivery. Requests for changes in quoted transportation modes will not be made or accepted on orders already processed unless otherwise mutually agreed upon by Seller and Buyer. Requests for changes in quoted transportation modes to orders already accepted by Seller will be subject to new freight terms and billed at the price in effect at the time of the request for change. Any request for changes to quoted transportation modes must be submitted in writing to Seller and are subject to Seller’s acceptance and adjustment in freight price. The transportation costs quoted by Seller may be changed by Seller without notice in order to reflect Seller’s prices at the time of shipment and will reflect any market increase in transportation costs. If a price for delivery has been quoted, any changes at the destination for transportation modes, spotting, switching, handling, storage and other accessorial services and demurrage shall be borne by the customer, and any related increase in transportation charges shall be added to the quoted price.

5. LIMITED WARRANTY: Subject to the limitations of Section 6, Seller's standard warranty that is applicable to the Goods and/or Software at the time of purchase is the only warranty applicable to the sale of Seller's Goods and/or Software and its terms, conditions and limitations are incorporated by reference herein and Seller warrants that it will perform the services as described in these terms and conditions and will exercise all reasonable skill, care and due diligence in the performance of the services. Seller warrants that all services performed shall be free from faulty workmanship for a period of thirty (30) days from completion of services. Thermal Solution Components, including but not limited to, fans, air-to-air heat exchangers, air conditioners, emergency DC vent systems and filtered thermal vent systems are warranted to be free from defects in material and workmanship for a period of twelve (12) months from date of shipment, or manufacturer’s pass through warranty, whichever is longer, provided the following conditions are met: (i) Semi-annual preventive maintenance logs are maintained by Buyer and such logs are available to Seller upon request; and (ii) Input voltage to the air conditioner unit does not vary by greater than +/-10%; and (iii) in the event of accidental or intentional shut-off, a Thermal Solution Component will not be restarted for at least five (5) minutes;

and (iv) the refrigerant specified on the unit nameplate label will be the only refrigerant utilized in the air conditioner unit; and, (v) Buyer complies with all installation, operations and maintenance instructions provided by Seller. Goods, Parts and/or Software purchased by Seller from a third party for resale or license to Buyer ("Resale Products") shall carry only the warranty extended by the original manufacturer. To the extent assignable, Seller assigns to Buyer any warranties that are made by manufacturers and suppliers of such Resale Products. EXCEPT AS SPECIFIED ABOVE, RESALE

PRODUCTS FURNISHED HEREUNDER ARE FURNISHED AS-IS, WHERE-IS, WITH NO

WARRANTY WHATSOEVER. THE WARRANTY SET FORTH IN THIS SECTION 5 AND THE

WARRANTY SET FORTH IN SECTION 8 ARE THE SOLE AND EXCLUSIVE WARRANTIES GIVEN

BY SELLER WITH RESPECT TO THE GOODS AND/OR SOFTWARE AND ARE IN LIEU OF AND

EXCLUDE ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ARISING BY OPERATION OF LAW

OR OTHERWISE, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE WHETHER OR NOT THE PURPOSE OR USE HAS BEEN DISCLOSED

TO SELLER IN SPECIFICATIONS, DRAWINGS OR OTHERWISE, AND WHETHER OR NOT

SELLER'S PRODUCTS ARE SPECIFICALLY DESIGNED AND/OR MANUFACTURED BY SELLER

FOR BUYER'S USE OR PURPOSE. SELLER'S WARRANTY EXTENDS ONLY TO PURCHASERS

WHO BUY FOR INDUSTRIAL OR COMMERCIAL USE. This warranty does not extend to any losses or damages due to misuse, accident, abuse, neglect, normal wear and tear, negligence (other than Seller's), unauthorized modification or alteration, use beyond rated capacity, unsuitable power sources or environmental conditions, improper installation, repair, handling, maintenance or application or any other cause not the fault of Seller. To the extent that Buyer or its agents have supplied specifications, information, representation of operating conditions or other data to Seller in the selection or design of the Goods and/or Software and the preparation of Seller's quotation, and/or scope of work, and in the event that actual operating conditions or other conditions differ from those represented by Buyer, any warranties or other provisions contained herein that are affected by such conditions shall be null and void. Buyer assumes all other responsibility for any loss, damage, or injury to persons or property arising out of, connected with, or resulting from the use of Goods, Parts, and/or Software, either alone or in combination with other products/components.

6. LIMITATION OF REMEDY AND LIABILITY: THE SOLE AND EXCLUSIVE REMEDY FOR

BREACH OF ANY WARRANTY HEREUNDER (OTHER THAN THE WARRANTY PROVIDED

UNDER SECTION 8) SHALL BE LIMITED TO REPAIR, CORRECTION OR REPLACEMENT, OR

REFUND OF THE PURCHASE PRICE UNDER SECTION 5. SELLER SHALL NOT BE LIABLE FOR

DAMAGES CAUSED BY DELAY IN PERFORMANCE AND THE REMEDIES OF BUYER SET

FORTH IN THIS AGREEMENT ARE EXCLUSIVE. IN NO EVENT, REGARDLESS OF THE FORM OF

THE CLAIM OR CAUSE OF ACTION (WHETHER BASED IN CONTRACT, INFRINGEMENT,

NEGLIGENCE, STRICT LIABILITY, OTHER TORT OR OTHERWISE), SHALL SELLER'S LIABILITY

TO BUYER AND/OR ITS CUSTOMERS EXCEED THE PRICE PAID BY BUYER FOR THE SPECIFIC

GOODS, PARTS, AND/OR SOFTWARE PROVIDED BY SELLER GIVING RISE TO THE CLAIM OR

CAUSE OF ACTION. BUYER AGREES THAT SELLER'S LIABILITY TO BUYER AND/OR ITS

CUSTOMERS SHALL NOT EXTEND TO INCLUDE INCIDENTAL, CONSEQUENTIAL OR PUNITIVE

DAMAGES. The term "consequential damages" shall include, but not be limited to, loss of anticipated profits, business interruption, loss of use, revenue, reputation and data, costs incurred, including without limitation, for capital, fuel, power and loss or damage to property or equipment. It is expressly understood that any technical advice furnished by Seller with respect to the use of the Goods, Parts and/or Software is given without charge, and Seller assumes no obligation or liability for the advice given, or results obtained, all such advice being given and accepted at Buyer's risk.

7. INSURANCE: Seller shall maintain the following insurance or self-insurance coverage: Worker’s Compensation in accordance with the statutory requirements of the state in which the work is performed. Employer’s Liability with a limit of liability of $2,000,000 per occurrence for bodily injury by accident or bodily injury by disease. Commercial General Liability (CGL) for bodily injury and property damage with a limit of $2,000,000 per occurrence and per location aggregate. Automobile Liability insurance that covers usage of all owned, non-owned and leased vehicles and which is subject to a combined single limit per occurrence of $2,000,000. Automobile Liability insurance includes Contractual Liability, but no special endorsements. Buyer expressly acknowledges and agrees that Seller has set its prices and entered into this Agreement in reliance upon the limitations of liability, insurance coverage, and other terms and conditions specified herein, which allocate the risk between Seller and Buyer and form a basis of this bargain between the parties.

8. PATENTS AND COPYRIGHTS: Subject to the limitations of the second paragraph of Section 6 and any and all associated terms, conditions and documents incorporated by specific reference by Seller, Seller warrants that the Goods and/or Software sold, except as are made specifically for Buyer according to Buyer's specifications, do not infringe any valid U.S. patent or copyright in existence as of the date of shipment. This warranty is given upon the condition that Buyer promptly notify Seller of any claim or suit involving Buyer in which such infringement is alleged and cooperate fully with Seller and permit Seller to control completely the defense, settlement or compromise of any such allegation of infringement. Seller's warranty as to utility patents only applies to infringement arising solely out of Buyer’s operation according to Seller's specifications and instructions of such Goods and/or Software.

In the event (i) such Goods and/or Software are held to infringe such a U.S. patent or copyright in such suit, and the use of such Goods and/or Software is enjoined, or (ii) a compromise or settlement is made by Seller, Seller shall have the right, at its option and expense, to procure for Buyer the right to continue using such Goods and/or Software, or replace them with non-infringing Goods and/or Software, or modify same to become non-infringing, or grant Buyer a credit for the depreciated value of such Goods and/or Software and accept return of them. In the event of the foregoing, Seller may also, at its option, cancel the agreement as to future deliveries of such Goods and/or Software, without liability. Except as otherwise provided herein, Seller or applicable third party licensor to Seller maintains all right, title and interest in and to the intellectual property in the Goods, Parts, and/or Software.

9. EXCUSE OF PERFORMANCE: Seller shall not be liable for delays in performance or for non-performance due to acts of God; acts of Buyer; war; viral outbreaks, disease, pandemic, widespread sickness, or epidemic; fire; flood; weather; sabotage; strikes or labor disputes; civil disturbances or riots; governmental requests, restrictions, allocations, laws, regulations, orders or actions;

unavailability of or delays in transportation; unavailability of or delays in the supply of materials, components, parts or labor required for the design and/or manufacture of Goods, Software or the performance by Seller hereunder; default of suppliers; or unforeseen circumstances, acts or omissions of Buyer, or any events or causes beyond Seller's reasonable control. Deliveries or other performance may be suspended for an appropriate period of time or canceled by Seller upon notice to Buyer in the event of any of the foregoing, but the balance of this Agreement shall otherwise remain unaffected as a result of the foregoing.