Amendment_3_-_SEAM_NNJ16567749R.pdf
PDF 154 KB Posted
- Attached to
- SPECIALIZED ENGINEERING AERONAUTICS AND MANUFACTURING Federal contract opportunity
- Solicitation number
- NNJ16567749R
About this file
Amendment 3 - SEAM NNJ16567749R
View the file
Other files for this federal contract opportunity
Show all 35
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:
(a) By completing items 8 and 15, and returning or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.
E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.
AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE
2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)
7. ADMINISTERED BY (If other than Item 6) CODE
STANDARD FORM 30 (REV. 10-83)
Prescribed by GSA FAR (48 CFR) 53.243
FACILITY CODE
9A. AMENDMENT OF SOLICITATION
NO.
9B. DATED (SEE ITEM 11)
10A. MODIFICATION OF CONTRACT/ORDER NO.
10B. DATED (SEE ITEM 13)
11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS
The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.
12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;
13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS.
IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.
CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO.
IN ITEM 10A.
B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).
C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:
D. OTHER (Specify type of modification and authority)
Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.
15C. DATE SIGNED
15A. NAME AND TITLE OF SIGNER (Type or print)
16C. DATE SIGNED
16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)
14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)
PAGE OF PAGES
6. ISSUED BY CODE
8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X)
CODE
15B. CONTRACTOR/OFFEROR
(Signature of person authorized to sign)
16B. UNITED STATES OF AMERICA
(Signature of Contracting Officer)
NSN 7540-01-152-8070
Previous edition unusable
JSC
P. Lamar Mueller, Contracting Officer
Please see attached pages for the description of this Amendment 3 to Request for Proposal (RFP) NNJ16567749R.
NASA/Johnson Space Center Attn: BR3/Portia Simone Keyes 2101 NASA Parkway Houston, TX 77058
NNJ16567749R
4200567749
NNJ16567749R
1 3
See Block 16C
02/29/2016
03/24/16
NNJ16567749R - Specialized Engineering, Aeronautics, and Manufacturing Amendment 3
SF30 Block 14. DESCRIPTION OF AMENDMENT/MODIFICATION
The purpose of this Amendment 3 to the Request for Proposal, NNJ16567749R, is to:
1. Add clause H.8, SMALL BUSINESS DEMONSTRATION, to Section H The following clause has been added in its entirety to Section H:
H.8 SMALL BUSINESS DEMONSTRATION (Task Categories A, B, and E) Offerors that are awarded contracts under SEAM will be required to demonstrate at the task order level that they can perform greater than 50% of the cost of each task order, per FAR 52.219-14, Limitations on Subcontracting.
(End of Clause)
See Attachment: Amendment 3 – SEAM Sec H – Special Contract Requirements
2. Update L.15.1, Past Performance – Volume I, to clarify Past Performance Matrix Instructions The paragraph at L.15.1(a) is hereby deleted in its entirety and replaced by the following:
Offerors shall complete Attachment L.16.1 (Relevant Past Performance Matrix) for each Task Category proposed. Offerors shall list up to one company, the prime or a major subcontractor, per critical capability. If the prime or a major subcontractor do not have relevant past performance for a critical capability, the Offeror shall leave the cell for the Contractor Name blank or insert “N/A”. A subcontractor is considered major if they are proposed to provide three or more critical capabilities in a single task category under SEAM. The total number of contracts listed for each Task Category shall not exceed ten. For each critical capability in the matrix, Offerors are allowed to list up to three relevant tasks from those ten contracts. It is important to note that a single task can provide past performance in multiple capabilities. Likewise, a single contract can include multiple relevant tasks. Offerors should list past performance relevant to proposed SEAM performance. In the event of a conflict between the past performance narrative and the relevant past performance matrix, the narrative will take precedence as the Offeror’s intended response. Offerors with no past performance experience shall indicate by inserting “none” for the first row for that capability under the Contract Name column. For Task Categories not being proposed, rename the sheet, inserting (N/A) in front of the Task Category.
See Attachment: Amendment 3 – SEAM Sec L – Instructions, Conditions, and Notices to Offerors
NNJ16567749R - Specialized Engineering, Aeronautics, and Manufacturing Amendment 3
3. Specify the amount of the TOTAL CONTRACT VALUE in Section L.15.3(A) The term “TOTAL CONTRACT VALUE” as used in RFP Section L.15.3(A) is $49,500,000, the maximum which may be ordered under this contract (total of all individual SEAM contracts), in accordance with RFP Section B.8. The paragraph at L.15.3(A)(1)(b) is hereby deleted in its entirety and replaced by the following:
The Contracting Officer’s assessment of appropriate subcontracting goals for this acquisition, expressed as a percent of TOTAL CONTRACT VALUE ($49.5M), is as follows:
See Attachment: Amendment 3 – SEAM Sec L - Instructions, Conditions, and Notices to Offerors
4. Update Security Clearance instructions in L.15.3, Responsibility Considerations – Volume III The paragraph E. Security Clearance is hereby deleted in its entirety and replaced by the following:
E. Security Clearance All labor categories proposed under Task Categories A, B, and C shall possess the appropriate security clearance (SECRET) in accordance with NFS 1852.204-75, Security Classification Requirements. As part of the proposal for Task Categories A, B, and C, Offerors shall state affirmatively, and provide evidence, that they possess the appropriate security clearance.
See Attachment: Amendment 3 – SEAM Sec L – Instructions, Conditions, and Notices to Offerors
5. Post the Questions and Answers Part III
See Attachment: Amendment 3 - SEAM Questions and Answers Part III
The applicable Tables of Contents have been updated accordingly.
All updates can be viewed on the SEAM Procurement website located at http://procurement.jsc.nasa.gov/seam/.
Except as provided by this amendment, all terms and conditions remain unchanged.
http://procurement.jsc.nasa.gov/seam/
| 2016-03-24T08:28:40-0500 | |
| PERRY MUELLER |
File details come from the government source that posted it. Updated .