03-10JA-34-1.pdf

NAVAIR 03−10JA−34.1 (Volume 1) 1 February 2003 Change 10 − 30 October 2015

TECHNICAL MANUAL

DEPOT, ORGANIZATIONAL AND INTERMEDIATE

MAINTENANCE

WITH

ILLUSTRATED PARTS BREAKDOWN

AIR REFUELING STORE

PART NUMBER

31−301−48310−5

This volume is one of a series of two volumes and is incomplete without: NAVAIR 03−10JA−34.2.

This manual supersedes NAVAIR 03-10JA-34.1 dated 15 February 2015 with change 9. The latest change information, change 10 dated 30 June 2015, has been incorporated in this issue and makes this a complete publication.

DISTRIBUTION STATEMENT C. Distribution authorized to U.S. Government agencies and their contractors to protect publications required for official use or for administrative or operational purposes, determined on 1 February 2003. Other requests for this document shall be referred to: Commander, Naval Air Systems Command (PMA−201/FUEL CONTAINMENT), 47123 Buse Road, Bldg. 2272, Patuxent River, MD 20670−1547.

DESTRUCTION NOTICE − For unclassified, limited documents, destroy by any method that shall prevent disclosure of contents or reconstruction of the document.

Published by Direction of Commander, Naval Air Systems Command

0803LP1159573

NAVAIR 03−10JA−34.1

Change 10 − 30 October 2015 Page A

LIST OF CURRENT CHANGES

Original 0 1 February 2003

Change 1 1 August 2005 Including IRAC 1

RAC 2 15 November 2005

Change 2 30 May 2007 Including IRAC 3

Change 3 1 June 2008

Change 4 1 May 2009 Including IRAC 4

Change 5 1 January 2010

Change 6 1 July 2011 Including IRACs 5 and 6

Change 7 15 May 2012

Change 8 15 October 2013 Including IRAC 7

Change 9 15 February 2015

Change 10 30 October 2015

Only those work packages assigned to the manual are listed in this index. If changed pages are issued, insert the changed pages and dispose of superseded pages, including classified data, in accordance with applicable regulations. The portion of text affected by the change is indicated by change bars in the outer margin of each column of text. Changes to illustrations are indicated by pointing hands or change bars as applicable.

NUMERICAL INDEX OF EFFECTIVE WORK PACKAGES

WP

Number Title

Volume 1

Title

Page A Numerical Index of Effective Work Packages

TPDR List of Technical Publication Deficiency Reports Incorporated

HMWS Warnings Applicable to Hazardous Materials

001 00 Alphabetical Index Air Refueling Store Assembly Part Number 31−301−48310−5

001 01 Numerical Index of Part Numbers Air Refueling Store Assembly Part Number 31−301−48310−5

001 02 Numerical Index of Reference Designations Air Refueling Store Assembly Part Number 31−301−48310−5

002 00 Introduction Air Refueling Store Assembly Part Number 31−301−48310−5

003 00 Description and Principles Of Operation Air Refueling Store Assembly Part Number 31−301−48310−5

004 00 Preparation for Service, Installation, Transportation, and Storage Air Refueling Store Assembly Part Number 31−301−48310−5

Change 10 − 30 October 2015 Page B

NUMERICAL INDEX OF EFFECTIVE WORK PACKAGES (continued)

WP

Number Title

Volume 1

005 00 Support Equipment and Materials Required Air Refueling Store Assembly Part Number 31−301−48310−5

006 00 Organizational Maintenance Air Refueling Store Assembly Part Number 31−301−48310−5

007 00 Intermediate and Depot Level Maintenance Air Refueling Store Assembly Part Number 31−301−48310−5

008 00 Illustrated Parts Breakdown Air Refueling Store Assembly Part Number 31−301−48310−5

009 00 Depot Level Maintenance Depot Level Maintenance Air Refueling Store Improved Power System (ARSIPS) Ram Air Turbine Assembly (RAT) Part Number 1706740

010 00 Depot Level Maintenance Hydraulic Pump Part Number 65160

Change 10 − 30 October 2015 Page C

NUMERICAL INDEX OF EFFECTIVE WORK PACKAGES

WP

Number Title

Volume 2

011 00 Depot Level Maintenance Hydraulic Reservoir Assembly Part Number 3830045−104

012 00 Intermediate Maintenance Filter and Relief Valve Assembly Part Number AD−B374−12M

013 00 Depot Level Maintenance Fuel Dump Valve Part Number 2830160−102

014 00 Depot Level Maintenance Fuel Transfer Pump Assembly Part Number 6179−1

014 01 Depot Level Maintenance Fuel Transfer Pump Assembly Part Number 29340

015 00 Depot Level Maintenance Hydraulic Motor Assembly (Fuel Transfer Pump) Part Number 624250

015 01 Depot Level Maintenance Hydraulic Motor Assembly (Fuel Transfer Pump) Part Number 68092

016 00 Depot Level Maintenance Venturi and Shutoff Valve (A5) Part Number 61373

016 01 Depot Level Maintenance Venturi and Shutoff Valve (A5) Part Number 8−4200−1

017 00 Depot Level Maintenance Fuel Flow Transmitter Part Number 151−005−001

018 00 Depot Level Maintenance Hydraulic Flow Control/Priority Valve and Signal Conditioning Unit Part Number 29500 (Able) and 29163

018 01 Depot Level Maintenance Hydraulic Flow Control/Priority Valve and Wire Harness Part Number 61380−1, 61380−2 and 152−3077

019 00 Depot Level Maintenance Prevent Valve Part Number 284148−0001 and 283626−0001

020 00 Intermediate and Depot Maintenance Drum Assembly Part Number 152−4106−1

021 00 Depot Level Maintenance Gear Case Assembly Part Number 128D4050

Change 10 − 30 October 2015 Page D

NUMERICAL INDEX OF EFFECTIVE WORK PACKAGES (continued)

WP

Number Title

Volume 2

022 00 Depot Level Maintenance Hose Reel Hydraulic Motor Part Number 68075

023 00 Intermediate Level Maintenance Hose Reel Lock Assembly Part Number 400117−1

024 00 Intermediate Level Maintenance Guillotine Assembly Part Number 400000−3

025 00 Depot Maintenance Servo Valve Positioner Assembly Part Number 152−2166−3

026 00 Intermediate Maintenance Accumulator Assembly Part Number 400107−01 and 149C2020

027 00 Intermediate and Depot Maintenance Controller Assembly Part Number 360−103−002

027 01 Intermediate and Depot Maintenance Controller Assembly Part Number 49−104−1

028 00 Depot Level Maintenance Refueling Coupling Assembly Part Number 60381−2 and 61520−2

028 01 Depot Level Maintenance Refueling Coupling Assembly Part Number 2820040−102

029 00 Intermediate Maintenance Drogue Lighting Generator Assembly Part Number 152−5101, 208−5022 and 269221

030 00 Intermediate, Organizational and Depot Maintenance Paradrogue Assembly Part Number 152−5084−1

031 00 Intermediate and Depot Maintenance Control Panel Assembly Part Number E10−21433

031 01 Intermediate and Depot Maintenance Control Panel Assembly Part Number E10−21109−1

032 00 Intermediate Maintenance Wire Harnesses of Air Refueling Stores and Selected Electrical Support Equipment Part Number 31−301−48310−5

033 00 Intermediate and Depot Maintenance Hydraulic Boost Cylinder Part Number E10−21932−1

Change 10 − 30 October 2015 Page E

NUMERICAL INDEX OF EFFECTIVE WORK PACKAGES (continued)

WP

Number Title

Volume 2

033 01 DELETED

034 00 Intermediate and Depot Maintenance Hose Reel Frame Assembly Part Numbers 152−4105−3 and 152−4105−4

035 00 Intermediate and Depot Maintenance Serving Gear Assembly Part Numbers 152−4107−3

036 00 Intermediate and Depot Maintenance Tail Cone Assembly Part Number 31−301−3781−2

LIST OF EFFECTIVE WORK PACKAGES/PAGES

Total number of pages in this manual is 711 consisting of the following:

WP/ Change WP/ Change WP/ Change Page No. No. Page No. No. Page No. No.

Title 10

A − G 10

TPDR−1 10

TPDR−2 (blank) 10

HMWS−1 1

HMWS−2 0

HMWS−3 − HMWS−6 8

HMWS−7 5

HMWS−8 − HMWS−9 8

HMWS−10 7

HMWS−11 0

HMWS−12 7

HMWS−13 9

HMWS−14 7

HMWS−15 4

HMWS−16 6

HMWS−17 7

HMWS−18 Blank 7

001 00 1 − 8 9

001 01 1 − 2 9 3 − 20 8 21 9 22 − 30 8

31 9 32 − 35 8 36 9 37 − 38 8 39 9 40 − 48 8 49 9 50 − 60 8

001 02 1 − 5 8 6 (blank) 8

002 00 1 10 2 − 5 8 6 10 7 − 9 8 10 (blank) 8

003 00 1 10 2 8 3 0 4 − 5 8 6 − 12 0 13 − 14 8 15 6 16 − 17 0

18 10 19 0 20 8 21 − 22 2 23 8 24 1 25 Deleted 6 26 6 26A 2 26B (blank) 2 27 0 28 4 29 − 32 0 33 10 34 8 35 − 37 0 38 8 39 0 40 1 41 0 42 (blank) 0 43 2 44 (blank) 2 45 0 46 (blank) 0 47 0 48 (blank) 0 49 0

Change 10 − 30 October 2015 Page F

WP/ Change WP/ Change WP/ Change Page No. No. Page No. No. Page No. No.

50 (blank) 0 51 0 52 (blank) 0 53 − 75 0 76 (blank) 0 77 − 78 8 79 6 80 (blank) 6

004 00 1 − 2 8 3 7 4 8 5 − 8 6 9 8 10 − 11 6 12 8 13 − 17 6 18 − 19 8 20 Deleted 7 21 − 23 6 24 (blank) 6

005 00 1 9 2 8 3 7 4 − 16 8 17 9 18 8 18A − 18C 8 18D (blank) 8 19 − 20 8 21 − 26 6 27 7 28 − 34 6 35 − 36 7 37 − 38 6 39 8 40 7 41 − 61 6 62 (blank) 6

006 00 1 10 2 6 3 7 4 8 5 7 6 8 7 − 12 6 13 10 14 6 15 − 16 8

17 − 24 6 25 8 26 − 43 6 44 8 45 7 46 6 47 − 49 10 50 − 53 7 54 6 55 − 56 8 57 − 59 6 60 − 62 8 62A 8 62B (blank) 8 63 − 74 6 75 − 76 7 77 6 78 − 79 8 80 7 81 − 84 6 85 7 86 6 87 7 88 6 89 7 90 − 91 6 92 8 93 − 96 6 97 9 98 7 99 6 100 8 101 − 104 6 105 8 106 6 107 − 108 10 109 − 110 6 111 8 112 − 113 6 114 7 115 − 124 6 125 − 126 8 127 − 128 6 129 8 130 − 135 6 136 8 137 6 138 10 139 − 140 6

007 00 1 − 3 10 4 8

4A 8 4B Blank 8 5 7 6 − 8 6 9 8 10 − 16 6 17 − 18 7 18A 10 18B (blank) 10 19 − 24 7 25 8 26 − 28 6 29 8 30 − 46 6 47 10 48 − 62 6 63 − 65 7 66 − 69 6 70 − 72 8 73 − 75 6 76 (blank) 6

008 00 1 10 2 − 4 8

5 RAC 2

6 5 7 − 9 8 10 9 11 − 16 8

17 RAC 2

18 8 19 4 20 8 21 − 23 10 24 − 25 8 26 9 27 8

28 RAC 2

29 8

30 RAC 2

31 − 32 8

33 RAC 2

34 5 35 − 38 4 39 5

40 − 42 RAC 2

43 − 44 8

45 RAC 2

46 8 47 5 48 8

Change 10 − 30 October 2015 Page G

WP/ Change WP/ Change WP/ Change Page No. No. Page No. No. Page No. No.

49 RAC 2

50 8

51 9 52 7 53 8

54 − 56 RAC 2

57 − 59 8 60 5

61 RAC 2

62 8

63 RAC 2

64 − 72 10 73 Deleted 5 74 − 76 6 77 8 78 − 79 6 80 8 81 6 82 8 83 Deleted 6 84 4 85 8 86 10

009 00 1 8 2 − 4 6 5 8 6 − 38 6 39 8 40 6 41 8 42 7 43 6 44 − 47 8 48 − 57 6 58 8 59 − 71 6 72 − 73 8 74 6 75 8 76 − 80 6 81 8 82 6 83 8

84 − 88 6 89 8 90 − 91 6 92 (blank) 6

010 00 1 9 2 − 6 0 7 9 8 − 9 8 10 − 11 0 12 − 13 7 14 − 16 0 17 8 18 5 19 − 20 0 21 − 22 1 23 8 24 − 26 0 27 8 28 − 29 0 30 (blank) 0

NAVAIR 03−10JA−34.1 TPDR−1/(TPDR−2 blank)

Change 10 − 30 October 2015

LIST OF TECHNICAL PUBLICATION DEFICIENCY REPORTS INCORPORATED

Identification No./QA Sequence No.

Location [work package (WP), page (Pg), paragraph (P), figure (F), table (T) number]

N31225−14−0008 (WP) 006 00 (Pg) 138 (WP) 008 00 (Pg) 86

N31225−14−0014 (WP) 006 00 (Pg) 13, 48, 107−108, 138 (WP) 007 00 (Pg) 18A

R09355−15−0022 (WP) 006 00 (Pg) 107, 108

N65886−15−6200 (WP) 008 00 (Pg) 21−23, 64−72, 86

N65886−15−6202 (WP) 008 00 (Pg) 22

N65886−15−6205 (WP) 003 00 (Pg) 18, 33

N65886−15−6210 (WP) 008 00 (Pg) 64−72

N65886−15−6220 (WP) 002 00 (T) 2

N65886−15−6224 (WP) 006 00 (Pg) 48

NAVAIR 03−10JA−34.1 HMWS−1

Change 1 − 1 August 2005

Warnings in this manual alert personnel to hazards associated with the use of hazardous materials. Additional information related to hazardous materials is provided in OPNAVINST 5100.23, Navy Hazardous Material Control Program, and the DOD 6050.5, Hazardous Materials Information System (HMIS) series publications. For each hazardous material used within the Navy, a Material Safety Data Sheet (MSDS) must be provided and available for review by users. Consult your local safety and health staff concerning any questions regarding hazardous materials, MSDS, personnel protective equipment requirements, appropriate handling and emergency procedures, and disposal guidance.

Under the heading ”HAZARDOUS MATERIALS WARNINGS,” complete warnings, including related icon(s) and numeric identifier, are provided for hazardous materials used in this manual.

In the text of the manual, the caption ”WARNING” is not used for hazardous material warnings. Hazards are cited with appropriate icon(s), the nomenclature of the hazardous material, and the numeric identifier that relates to the complete warnings. Users of hazardous materials shall refer to the complete warnings.

EXPLANATION OF HAZARDOUS MATERIAL ICONS

Biological The abstract symbol bug shows that a material may contain bacteria or viruses that present a danger to your life or health.

Chemical The symbol of a liquid dripping onto a hand shows that the material will cause burns or irritation to human skin or tissue.

Cryogenic The symbol of a human hand in a block of ice shows that the material is extremely cold and can injure human skin or tissue.

Eye Protection The symbol of a person wearing goggles shows the material will injure the eyes.

Explosion The rapidly expanding symbol shows that the material may explode if subjected to high temperatures, sources of ignition, or high pressure.

Fire The symbol of a fire shows that the material may ignite and cause burns.

Poison The symbol of a skull and crossbones shows that the material is poisonous or is a danger to life.

Vapor The symbol of a human figure in a cloud shows that the material vapors present a danger to life or health.

Radiation The symbol of three circular wedges shows that a material emits radioactive energy and can injure human tissue or organs.

NAVAIR 03−10JA−34.1 HMWS−2

HAZARDOUS MATERIAL WARNINGS

Material Index Warning

Turbine Fuel MIL−DTL−5624 1

Turbine Fuel, Aviation (JP−4, JP−5), MIL−DTL−5624, is toxic and flammable/combustible. Do not smoke when using it, and do not use it where others are smoking. Contact of skin with liquid can irritate skin.

Contact of eyes with liquid can cause severe irritation and blurred vision. Inhalation of vapor may cause irritation, headache, nausea, and dizziness. If liquid contacts eyes, flush eyes thoroughly with water.

Immediately remove fuel−saturated clothing. If vapors cause dizziness, go to fresh air. If liquid is swallowed, do not try to vomit; get medical attention. When handling large quantities of liquid (more than 1 gallon) at an unexhausted workbench, wear approved respirator and goggles or face shield. Dispose of liquid−soaked rags in approved metal container. Metal containers of fuel must be grounded to maintain electrical continuity.

Fuel Tank Detergent MIL−D−81956 2

Detergent, Fuel Tank, MIL−D−81956, is irritating to eyes, skin and respiratory tract. Avoid contact with eyes, or skin. Use safety goggles and protective gloves. Wash hands after use. Use with adequate ventilation. If vapor concentration exceeds exposure limit, use of a NIOSH approved respirator may be required.

DELETED 3

Corrosion Preventive Compound

MIL−C−81309 4

Water−Displacing, Corrosion Preventive Compound, MIL−C−81309, Type Il, Class I or Type III, Class I, is toxic and flammable. Avoid contact with skin and eyes.

Avoid breathing vapors. Keep away from heat, sparks and flame. Vapor accumulations may explode if igni-ted. Protection: rubber gloves and chemical goggles;

faceshield and laboratory apron required when work-ing with large quantities; respirator with acid/organic vapor cartridge and mist pre−filter required during spraying operations or in poorly ventilated areas.

NAVAIR 03--10JA--34.1 HMWS--3

Change 8 -- 15 October 2013

HAZARDOUS MATERIAL WARNINGS

Material Index Warning

Desiccant MIL--D--3464 5

ActivatedDesiccant,MIL--D--3464, is an inhalation ha-zard. If unit pack integrity is broken, handle with care and avoid breathing dust. May contain crystalline quartz, a suspected carcinogen. Protection: None nor-mally required. Use dustmask if excessive dusting oc-curs.

Nitrogen Gas 6

Nitrogen (gaseous) is a nontoxic, inert gas that may displace the air used for breathing and cause asphyxi-ation. Use nitrogen in a well ventilated area. Protec-tion: Safety glasses and loose fitting insulated gloves.

Keep caps on cylinders when not in use.

Primer Thread Locking, MIL--S--22473 Grade N and T 7

Primer Sealing/Thread Locking Compound, MIL--S--22473, Grade N or Grade T is a skin and eye irritant. Avoid prolonged contact with skin and eyes.

Store below 120_F. Protection: chemical goggles, gloves and protective skin compound.

DELETED 8

DELETED 9

DELETED 10

Laundry Soap Fed. Spec. P--S--1792 11

LaundrySoap, P--S--1792, in itsmixed form is general-ly considered nonhazardous. Use of a dust mask is recommended when working with soap in the pow-dered form.

NAVAIR 03−10JA−34.1 HMWS−4

Change 8 − 15 October 2013

HAZARDOUS MATERIAL WARNINGS

Material Index Warning

Degreasing Solvent MIL−PRF−680, Type II 12

Degreasing Solvent, MIL−PRF−680, Type II, is toxic and flammable. Avoid contact with skin and eyes.

Avoid breathing vapors. Use with adequate ventilation.

Avoid heat, sparks, flame, and contact with strong oxi-dizing agents. Protection: neoprene gloves, chemical goggles, faceshield, protective clothing required when splashing is possible or expected, and respirator with organic vapor cartridge.

Hydraulic Fluid MIL−PRF−83282 13

Hydraulic Fluid, MIL−PRF−83282, is toxic and flam-mable. Avoid contact with skin or eyes. Keep away from heat, sparks and flame. Do not re−use containers.

Protection: rubber gloves and chemical goggles.

Chemical Conversion Coating MIL−DTL−5541 14

Chemical Conversion Coating, MIL−DTL−5541, is tox-ic and flammable. Avoid contact with skin and eyes.

Avoid breathing vapors; upper respiratory tract irrita-tion or damage may occur. May be harmful or fatal if swallowed. Contains chromic acid, a systemic poison and may aggravate pre−existing conditions. Wash hands and face with soap and water after use and be-fore smoking or eating. Immediately remove contami-nated clothing and launder before re−use. Avoid hu-midity, strong acids, alkalis, reducing compounds, flammable or combustible material. Store in a dry area in tightly closed containers. Store away form oils, greases, and corrosives. When mixing; add slowly to water while mixing. Protection: rubber gloves, chemi-cal goggles, faceshield, and laboratory apron; respira-tor with acid/organic vapor cartridge and mist prefilter is required during spray operations or in poorly venti-lated areas.

Sealing Compound MIL−S−8802, Type II 15

Sealing Compound (Polysulfide), MIL−S−8802, Type II, Class Optional, is toxic and flammable. Avoid pro-longed breathing of vapors and prolonged or repeated skin contact. Keep away from heat, sparks, and open flame. Use with adequate ventilation to prevent vapor buildup. Protection: rubber gloves, chemical goggles and protective skin compound.

DELETED 16

NAVAIR 03−10JA−34.1 HMWS−5

HAZARDOUS MATERIAL WARNINGS

Material Index Warning

Grease MIL−PRF−23827 17

Aircraft and Instrument Grease, MIL−PRF−23827, is toxic. Avoid contact with skin, eyes and clothing. Do not breathe vapors or mist. Wash hands thoroughly after each use. Do not use contaminated clothing or boots.

Do not eat, drink or smoke in work area. Store in a cool, dry and well ventilated area. Keep away from heat, sparks and flame. Keep container closed when not in use. Avoid contact with strong, oxidizing agents.

Protection: neoprene gloves and chemical goggles.

Thread Locking Compound MIL−S−22473, 18 Grade B and Grade C

Sealing/Thread Locking Compound, MIL−S−22473, Grade B or Grade C, is a skin and eye irritant. Avoid prolonged contact with skin and eyes. Store below 120�F. Protection: chemical goggles, gloves and pro-tective skin compound.

Adhesive MIL−A−46050, Type II Class II 19

Cyanoacrylate Adhesive, MIL−A−46050, Type II, is a skin, eye and respiratory tract irritant. Avoid breathing vapors. Avoid contact with skin and eyes. Adhesive bonds skin rapidly and strongly. Do not force separa-tion of bonded skin, but follow manufacturer’s instruc-tions or seek medical attention. Adhesive will burn.

Avoid excessive heat. Avoid contact with water and alcohol. Protection: neoprene gloves, chemical goggles and protective skin cream.

DELETED 20

DELETED 21

NAVAIR 03−10JA−34.1 HMWS−6

HAZARDOUS MATERIAL WARNINGS

Material Index Warning

Adhesive DP−190 22

Adhesive, DP−190, Scotch−Weld epoxy, is a severe eye irritant and can cause possible permanent impair-ment of vision. Also skin irritant and respiratory irritant.

Avoid any contact with eyes or skin. Use safety goggles and butyl rubber or polyethylene protective gloves. Wash hands after use. Avoid inhalation of va-pors during cure cycle. Avoid inhalation of dust created during sanding, grinding, or cutting. Use with adequate ventilation below TLV concentration. Use of NIOSH approved fume respirator may be required. Refer to MSDS for additional information.

DELETED 23

DELETED 24

Petrolatum VV−P−236 25

Petrolatum VV−P−236, is an eye irritant and upon ex-posure may cause skin irritation. May cause stomach/ intestinal irritation upon ingestion. Avoid extreme heat and strong oxidizing agents. Protection: neoprene gloves and chemical goggles.

Hydraulic Fluid MIL−PRF−46170 26

Preservative Hydraulic Fluid, MIL−PRF−46170, is tox-

ic. Protection: Chemical splash proof goggles and glo-ves. Use in well ventilated area. Keep fluid off skin, eyes and clothes. Store away from open flames and any strong oxidizers. Do not eat, drink, or smoke when handling this fluid. Ensure good personal hygiene prior to eating, drinking, or smoking.

NAVAIR 03−10JA−34.1 HMWS−7

Change 5 − 1 January 2010

HAZARDOUS MATERIAL WARNINGS

Material Index Warning

Resin Epon 828, Shell Roberts and Assoc. 27

Epoxy Resin Adhesive, EPON 828, is toxic and flam-mable. Avoid contact with skin and eyes. Use in well ventilated area and avoid breathing vapors. Wash hands thoroughly after each use. Close container after usage. Store in a cool, dry and well ventilated area.

Avoid contact with strong oxidizing agents. Protection:

rubber gloves, chemical goggles and protective skin compound; respirator with organic vapor cartridge re-quired in poorly ventilated areas.

Curing Agent Epon V−25, Shell Roberts and Assoc. 28

Curing Agent, Epon V−25, Shell Roberts and Assoc., may cause mild irritation to skin and is extremely irritat-ing to eyes. Avoid any contact with eyes or skin. Use safety goggles and protective PVC or rubber gloves.

Wash hands after use. Use with adequate ventilation.

Refer to MSDS for additional information

Calibration Fluid, Type II MIL−PRF−7024 29

Type II Calibration Fluid, MIL−PRF−7024, is flam-mable, toxic, and a severe irritant. Use in well−venti-lated area. Inhalation: Remove to fresh area air; get medical attention. Eye contact: Flush with water; get medial attention. Skin contact: Wash with soap and water. Ingestion: Do not induce vomiting; get medical attention. Wash hands with soap and water after use and before eating, drinking or smoking.

Thread Locking Compound MIL−S−46163, Type II Grade M or Grade N 30

Thread Locking Compound, MIL−S−46163, Type II Grade M or Grade N, may cause dermatitis on pro-longed contact. Avoid prolonged skin contact. Protec-tion: rubber gloves, chemical goggles and protective skin compound.

Molybdenum Disulfide Grease

MIL−G−21164 31

Molybdenum Disulfide Grease, MIL−G−21164, is tox-

ic. Avoid contact with skin and eyes. Wash hands thor-oughly with soap and water before handling food or smoking. Store in cool, dry and well ventilated area.

Keep away from heat, sparks and flame. Avoid contact with liquid oxygen and other strong oxidizing agents.

Protection: chemical goggles, neoprene gloves and laboratory apron.

NAVAIR 03−10JA−34.1 HMWS−8

HAZARDOUS MATERIAL WARNINGS

Material Index Warning

Lubricant MIL−L−15016 32

Lubricant, MIL−L−15016, if lubricating oil is decom-posed by heat, toxic gases are released. Prolonged contact with liquid or mist may cause dermatitis and ir-ritation. In case of prolonged contact with skin, wash with soap and water. Remove saturated clothing. Eye contact: Flush with water immediately. Ingestion: Do not induce vomiting, get medical attention. When han-dling liquid, wear rubber gloves. If prolonged contact with mist is likely, wear approved respirator.

Kerosene VV−K−211 33

Kerosene, VV−K−211, is a respiratory, eye and skin ir-ritant. Avoid contact with eyes or skin. Use safety goggles and protective gloves. Wash hands after use.

Avoid inhalation of vapor. Use with adequate ventila-tion or NIOSH approved respirator may be required.

Remove sources of ignition; product is extremely flam-mable. Refer to MSDS for additional information.

DELETED 34

Adhesive MMM−A−1617 35

Adhesive, MMM−A−1617, contains organic solvent and is flammable. Do not use near open flames, weld-ing areas or on hot surfaces. Do not smoke when using or when others are smoking. Prolonged breathing of vapors is dangerous. Use in well ventilated spaces.

Use respirator in confined areas. Avoid skin contact.

Prolonged or repeated skin contact can have a toxic ef-fect on affected skin area.

Dry Ice BB−C−104 36

Dry Ice, Carbon Dioxide (solid), BB−C−104, can cause severe skin burns and frostbite. Avoid contact with a strong oxidizer. Use in a well ventilated area. Protec-tion: cryogenic gloves, goggles and faceshield.

NAVAIR 03−10JA−34.1 HMWS−9

HAZARDOUS MATERIAL WARNINGS

Material Index Warning

Lubricant MIL−PRF−6085 37

Instrument Lubricating Oil, MIL−PRF−6085, is an eye irritant. Material will burn. Keep away from heat, open flame. Protection: Chemical splash proof goggles.

Good ventilation is required if oil spray is being genera-ted. Avoid breathing of oil mist. Ensure good personal hygiene prior to eating, drinking, or smoking.

Epoxy Primer MIL−PRF−85582 38

Primer, MIL−PRF−85582, is a respiratory, eye and skin irritant. Ingestion is corrosive to tissue and may cause kidney, or liver damage and reproductive effects. Avoid contact with eyes, or skin. Use safety goggles and neo-prene, polyethylene or rubber protective gloves. Wear protective clothing. Wash hands after use. Avoid in-halation of vapors. Use with adequate ventilation. Use NIOSH approved respirator for organic vapor environ-ments. Remove sources of ignition, product is flam-mable. Refer to MSDS for additional information.

Dry Film Lubricant MIL−PRF−46010 39

Dry Film Lubricant, MIL−L−46010, is a respiratory, eye and skin irritant. Avoid contact with eyes or skin. Use safety goggles and neoprene, nitrile, or natural rubber protective gloves. Wash hands after use. Avoid inhala-tion of mist. Use with adequate ventilation of NIOSH approved respirator may be required. Remove sources of ignition; product is flammable. Refer to MSDS for additional information.

Cyclohexane Solvent 40

Cyclohexane Solvent is a respiratory, eye and skin irri-tant. Avoid contact with eyes or skin. Use safety goggles and protective gloves. Wash hands after use.

Avoid inhalation of vapor. Use with adequate ventila-tion or NIOSH approved respirator may be required.

Remove sources of ignition, product is extremely flam-mable. Refer to MSDS for additional information.

RTV Adhesive Dow Corning RTV 3145 41

RTV Adhesive/Electrical Insulating Compound, Dow Corning RTV−3145, is combustible at temperatures above 250� Fahrenheit and is an irritant to skin and eyes. Protection: safety glasses, rubber gloves, and good ventilation. Local or general ventilation is recom-mended when using this material. Keep compound off skin and eyes. Do not breathe vapors. Ensure good personal hygiene prior to eating, drinking, or smoking.

NAVAIR 03−10JA−34.1 HMWS−10

Change 7 − 15 May 2012

HAZARDOUS MATERIAL WARNINGS

Material Index Warning

Polyurethane Topcoat

MIL−PRF−85285 42

Paint, MIL−PRF−85285, (Polyurethane Topcoat) is a respiratory, eye and skin irritant. Ingestion is corrosive to tissues and may cause kidney or liver damage.

Avoid contact with eyes or skin. Use safety goggles and protective gloves. Wear protective clothing. Wash hands after use. Avoid inhalation of vapors and spray mists. Use with adequate ventilation. Use NIOSH ap-proved respirator for organic vapor environments. Re-move source of ignition; product is extremely flam-mable. Refer to MSDS for additional information.

PLIOBOND 20 Adhesive 200−29−003 43

Adhesive, 200−29−003, is a respiratory, eye and skin irritant. Avoid contact with eyes, or skin. Use safety goggles and neoprene protective gloves. Wash hands after use. Avoid inhalation of vapor. Use with adequate ventilation. NIOSH approved respirator may be re-quired. Remove sources of ignition, product is ex-tremely flammable. Vapor may travel along the ground.

Refer to MSDS for additional information.

Conformal Coating MIL−I−46058 44

Conformal Coating (Electrical Insulating Compound), MIL−I−46058, Type ER (Dexter Electronic P/N PC16−M), is toxic and flammable. Avoid prolonged skin contact. Do not breathe spray mists. Keep con-tainers tightly closed when not in use. Keep away form heat, sparks or flame. Avoid contact with strong oxidiz-ing agents. Protection: neoprene gloves, chemical goggles, faceshield and protective skin compound;

protective clothing and respirator with organic vapor cartridge and paint mist pre−filter are required during spray operations; full face−piece continuous flow sup-plied air respirator required in poorly ventilated areas.

Rubbing Alcohol TT−I−735 45

Rubbing Alcohol (Isopropyl Alcohol), TT−I−735, is a respiratory, eye and skin irritant. Use safety goggles and protective gloves. Wash hands after use. Avoid in-halation of vapor. Use with adequate ventilation or NIOSH approved respirator may be required. Remove sources of ignition; product is extremely flammable.

Refer to MSDS for additional information.

NAVAIR 03−10JA−34.1 HMWS−11

HAZARDOUS MATERIAL WARNINGS

Material Index Warning

Detergent MIL−PRF−85570, Type II 46

Detergent/Aircraft Cleaning Compound, MIL− PRF−85570, Type II, V, is a skin and eye irritant. Avoid contact with skin and eyes. Wash hands and face after using. Avoid breathing vapors. Launder contaminated clothing before re−use. Store in cool, dry, well venti-lated and low fire risk area. Protect from heat, shock and friction. Keep containers closed when not in use.

Avoid contact with strong acids or oxidizing agents.

Protection: rubber gloves, chemical goggles, face-shield and protective clothing; respirator with organic vapor cartridge required in poorly ventilated areas.

Adhesive 600−038−001 47

Adhesive, 600−038−001. Silicone RTV adhesive/seal-ants release acetic acid vapor. Uncured adhesive/ sealant may irritate eyes. Avoid direct contact. main-tain in well−ventilated area during curing period.

Thermal Compound CA210 /13068/ 48

Thermal Compound, CA210 /13068/. Epoxy causes ir-ritation to skin and eyes and possible allergic reac-tions. Prolonged and repeated contact may cause sensitization which will result in allergic reactions.

Avoid breathing vapor. Eye contact: flush with water for 15 minutes. Skin contact: Wash with soap and water.

Do not use solvents. Remove soiled clothing and wash before reuse. If irritation persists, get medical atten-tion.

Solder SN63WRMAP3 49

Solder, SN63WRMAP3, is irritating to eyes, skin and respiratory tract when soldering. Avoid contact with eyes, or skin. Use safety goggles and leather protec-tive gloves. Wash hands after use. Use with adequate ventilation. If vapor concentration exceeds exposure limit, use of a NIOSH approved respirator may be re-quired. Refer to MSDS for additional information.

Epoxy CA249 /13068/ 50

Epoxy, CA249 /13068/, causes irritation to skin and eyes and possible allergic reactions. Prolonged and repeated contact may cause sensitization which will result in allergic reactions. Avoid breathing vapor. Eye contact: Flush with water for 15 minutes. Skin contact:

Wash with soap and water. Do not use solvents. Re-move soiled clothing and wash before reuse. If irrita-tion persists, get medical attention.

NAVAIR 03−10JA−34.1 HMWS−12

HAZARDOUS MATERIAL WARNINGS

Material Index Warning

Adhesive Primer CA242 /13068/ 51

Primer, Adhesive, CA242 /13068/, adhesive primer is flammable and toxic. Keep product and its vapor away from heat, sparks and open flames. Use in well−venti-lated area. Avoid prolonged breathing of vapor. Avoid contact with eyes and skin. Keep container tightly closed when not in use.

Conductive Adhesive CA241 /13068/ 52

Adhesive, Conductive, CA241 /13068/, adhesive/seal-ants release acetic acid vapor. Uncured adhesive/ sealant may irritate eyes. Avoid direct contact. Main-tain in well−ventilated area during curing period.

Cleaning Compound Solvent MIL−C−38736 53

Cleaning Compound Solvent, MIL−C−38736, is a solvent soluble cleaner. It is used to emulsify greases.

Some products are flammable. Keep away from heat, sparks and open flames. Use in well−ventilated area.

Avoid prolonged breathing of vapor and contact with skin. Eye contact: Immediately flush with water; get medical attention.

DELETED 54

Solder SAE−AMS4750 55

Solder, SAE−AMS4750, is irritating to eyes, skin and respiratory tract when soldering. Avoid contact with eyes, or skin. Use safety goggles and leather protec-tive gloves. Wash hands after use. Use with adequate ventilation. If vapor concentration exceeds exposure limit, use of a NIOSH approved respirator may be re-quired. Refer to MSDS for additional information.

NAVAIR 03--10JA--34.1 HMWS--13

Change 9 -- 15 February 2015

HAZARDOUS MATERIAL WARNINGS

Material Index Warning

Aluminum Oxide MIL--A--21380 56

Aluminum Oxide MIL--A--21380, when handled as a solid in air--exhausted, enclosed cabinet, make sure that ventilation is in operation and that doors are prop-erly sealed. When handling solid in a partially en-closed, air--exhausted cabinet, or in open work area, wear approved respirator, gloves, goggles and long sleeved clothing.

DELETED 57

DELETED 58

DELETED 59

Compressed Air 60

Compressed Air, used for any cleaning or drying op-eration, do not exceed 30 psig at the nozzle. Eyes can be permanently damaged by contact with liquid or large particles propelled by compressed air. Inhalation of air blown particles or solvent vapor can damage lungs. When using air for drying or cleaning at an air--exhausted workbench, wear approved goggles or face shield. When using air for drying or cleaning at an un-exhausted workbench, wear approved respirator and goggles.

NAVAIR 03−10JA−34.1 HMWS−14

HAZARDOUS MATERIAL WARNINGS

Material Index Warning

Lubricating Oil MIL−PRF−6081, Grade 1010 61

Lubricating Oil MIL−PRF−6081, Grade 1010, is flam-mable, toxic and an irritant. Keep away from heat, sparks and open flames. Use in well−ventilated area, especially when exposure to hot oil or mist is possible.

Eye contact: Flush with water for 15 minutes; get medi-cal attention. Skin contact: Wash with soap and water.

Inhalation: Remove to fresh air; get medical attention.

Ingestion: Do not induce vomiting; get medical atten-tion. Wash hands with soap and water after use and before eating, drinking or smoking.

Fluorescent Dye 62

Fluorescent Dye, is flammable, toxic and an irritant.

Keep away from heat, sparks and open flames. Use in well−ventilated area. Eye contact: Flush with cold wa-ter; get medical attention. Skin contact: Wash with soap and water. Inhalation: Remove to fresh air; get medical attention. Ingestion: Do not induce vomiting;

get medical attention. Wash hands with soap and wa-ter after use and before eating, drinking or smoking.

Spring 63

Spring−Loaded Component, springs are under ex-treme pressure. Exercise care when removing springs.

DELETED 64

Aluminum Etchant SAE AMS 1640 65

Aluminum Etchant SAE AMS 1640, may cause irrita-tion or burns to skin, eyes, respiratory tract. Avoid any contact with eyes or skin. Avoid breathing mist. Use safety goggles and protective PVC or rubber gloves.

Wear protective clothing. Wash hands after use. Use with adequate ventilation. Use of NIOSH approved fume and mist respirator may be required. Ensure safety shower and eye wash station in work area. Re-fer to MSDS for additional information.

NAVAIR 03−10JA−34.1 HMWS−15

Change 4 − 1 May 2009

HAZARDOUS MATERIAL WARNINGS

Material Index Warning

Chrome Plating Solution AMS 2460, is a strong oxidiz-er and a suspect carcinogen. Ingestion of large quanti-ties may be fatal. May cause local irritation of mucous membranes and skin. Chronic exposure may lead to asthma−like symptoms and perforations of the nasal septum. Use in well−ventilated area. W6M neoprene gloves, goggles, rubber boots and apron. Ingestion:

Do not induce vomiting or give unconscious victim any-thing to drink. Drink plenty of milk, water or milk of mag-nesia. Eye contact: Flush with water for 15 minutes; get medical attention. Skin contact: Remove contami-nated clothing and flush with water for 15 minutes; get medical attention.

Chrome Plating Solution AMS 2460 66

Flame Spray Coating, AMS 2447−7, may irritate lungs if inhaled. Contact may cause skin and eye irritation.

Thermal spray process may convert ingredients to chemicals that cause cancer. Do not inhale dust or al-low to enter eyes, mouth, or open wounds. Wear safety glasses and gloves. Do not create dust and use ven-tilation.

Flame Spray Coating AMS 2447−7 67

High−Pressure Testing 68

High pressures used during testing may cause ruptur-ing or bursting of faulty tubes and hoses. The result could be serious injury. To prevent injury, use approved personal protective equipment (eye goggles/face-shield). When caps or plugs are used, be sure they are securely installed to prevent them from being blown out. Assure that pressures are bled off before exposing or touching hoses or tubes.

Anodic Coating MIL−A−8625, Type II, is a skin irritant.

Vapor and mist are extremely corrosive to the nose, throat, mucous membranes, skin and eyes. Irritation, coughing, chest pain and difficulty in breathing may occur with brief exposure by inhalation while prolonged exposure may result in more serious irritation and tissue damage. Brief contact of vapor with the eyes is severely irritating and eye contact with liquid may cause permanent eye injury and blindness. Prolonged liquid contact burns or destroys surrounding tissue.

Ingestion of liquid burns the tissues, causes severe abdominal pain, nausea, vomiting and collapse.

Ingestion: Do not induce vomiting. Eye contact: Imme-diately flush with water for thirty (30) minutes. Skin con-tact: Immediately flush with water for thirty (30) min-utes. Inhalation: Remove to fresh air. Get medical attention if exposed to this material in any way. Wear approved gloves, goggles and coveralls when handling material. Use in well−ventilated area.

Anodic Coating MIL−A−8625, Type II 69

NAVAIR 03−10JA−34.1 HMWS−16

Change 6 − 1 July 2011

HAZARDOUS MATERIAL WARNINGS

Material Index Warning

Polyamide Epoxy Primer MIL−PRF−23377 70

Polyamide Epoxy Primer MIL−PRF−23377, is toxic and flammable. Contains chromium compounds which may cause cancer and is irritating to eyes and skin.

Overexposure may cause lightheadedness, nausea, narcosis, etc. Protection: Chemical splash proof goggles, gloves, and good ventilation (or respirator).

Keep container closed. Keep sparks, flames and heat away. Keep primer off skin, eyes and clothes. Do not breathe vapors. Insure good personal hygiene prior to eating, drinking, or smoking.

Lacquer MIL−L−81352, is toxic and flammable. It is irritating to eyes and skin. Overexposure may cause lightheadedness, nausea, and narcosis. Protection:

Chemical splashproof goggles, gloves, and good ventilation (or respirator). Keep container closed.

Keep sparks, flames, and heat away. Keep off skin, eyes, and clothes. Do not use in enclosed or confined spaces. Do not breathe vapors. Insure good personal hygiene prior to eating, drinking, or smoking.

Lacquer MIL−L−81352 71

Adhesive Sealant, Silicone RTV, MIL−A−46106 72

Adhesive Sealant, MIL−A−46106, is toxic and flammable. Avoid prolonged breathing of vapor. Keep away from heat, sparks and open flame. Wear nitrile gloves and safety glasses. Consult the applicable Material Safety Data Sheet (MSDS) and local Occupational Safety and Health (OSH) regulations for appropriate safety precautions.

Retaining Compound MIL−R−46082 73

Retaining Compound, MIL−R−46082, is flammable and may cause irriation to eyes, skin, and respiratory tract. Wear nitrile gloves and safety glasses. Avoid repeated/prolonged contact. Use only in well ventilated areas. Keep away from open flames or other sources of ignition. Consult the applicable Material Safety Data Sheet (MSDS) and local Occupational Safety and Health (OSH) regulations for additional information.

Grease, Tribolube 47, may cause irritation to skin and eyes. Wear nitrile gloves and safety glasses. Toxic vapors are released at temperatures exceeding 250 degrees celsius. Consult the applicable Material Safety Data Sheet (MSDS) and local Occupational Safety and Health (OSH) regulations for additional information.

Grease Tribolube 47 74

Antifretting Compound, 718050, may cause irritation to the eyes and skin. Use in a well−ventilated area.

Wear nitrile gloves and safety glasses. Consult the applicable Material Safety Data Sheet (MSDS) and local Occupational Safety and Health (OSH) regulations for additional information.

Antifretting Compound 718050 75

NAVAIR 03−10JA−34.1 HMWS−17/(18 blank)

HAZARDOUS MATERIAL WARNINGS

Material Index Warning

Polyurethane Foam MIL−PRF−83671 76

Polyurethane Foam, MIL−PRF−83671, is toxic and flammable and may cause skin irritation. Avoid prolonged breathing of vapors. Use in well ventilated area. Wear nitrile gloves and safety glasses. Consult the applicable Material Safety Data Sheet (MSDS) and local Occupational Safety and Health (OSH) regulations for additional information.

EPOWELD 8173, is flammable and can cause irritation to the eyes, skin, and respiratory tract. Use in well ventilated area. Wear nitrile gloves and safety glasses.

Consult the applicable Material Safety Data Sheet (MSDS) and local Occupational Safety and Health (OSH) regulations for additional information.

EPOWELD 8173 Part B 77

Coating, Corrosion Preventative, AMS−C−27725 is a respiratory, eye and skin irritant. Ingestion may cause gastrointestinal irritation, nausea, vomiting, and diarrhea. Avoid contact with eyes or skin. Use safety goggles and protective gloves. Avoid inhalation of vapors and spray mists. Use with adequate ventilation.

Use NIOSH approved respirator for organic vapor environments. Product is flammable, do not use near sources of ignition. Refer to MSDS for additional information.

Coating, Corrosion Preventative, AMS−C−27725 78

Solder MIL−S−45743 79

Solder, MIL−S−45743, is irritating to eyes, skin and respiratory tract when soldering. Avoid contact with eyes, or skin. Use safety goggles and leather protec-tive gloves. Wash hands after use. Use with adequate ventilation. If vapor concentration exceeds exposure limit, use of a NIOSH approved respirator may be re-quired. Refer to MSDS for additional information.

NAVAIR 03--10JA--34.1 001 00

Change 9 -- 15 February 2015 Page 1

DEPOT, ORGANIZATIONAL AND INTERMEDIATE MAINTENANCE

WITH ILLUSTRATED PARTS BREAKDOWN

ALPHABETICAL INDEX

AIR REFUELING STORE ASSEMBLY

PART NUMBER 31--301--48310--5

This Work Package supersedes WP 001 00 dated 15 October 2013

Title WP Number

Numerical Index of Part Numbers 001 01

Numerical Index of Reference Designators 001 02

Introduction 002 00

Accumulator Assembly, Part Number 400107--01 and 149C2020, Intermediate Maintenance 026 00 Assembly 026 00 Cleaning 026 00 Disassembly 026 00 Illustrated Parts Breakdown 026 00 Inspection 026 00 Introduction 026 00 Repair 026 00 Testing 026 00

Air Refueling Store Assembly, Part Number 31--301--48310--5, Intermediate and Depot Maintenance 007 00

Center Section Access Door Assemblies 007 00 Center Section Assembly 007 00 General Maintenance Procedures 007 00 Hose Reel Assembly 007 00 Introduction 007 00 Nose Cone Assembly 007 00 Nose Cone Door Assemblies 007 00 Preparation for Maintenance 007 00 Refueling Assembly 007 00 Tail Section Assembly 007 00 Test Procedures 007 00 Troubleshooting 007 00

Air Refueling Store Assembly, Part Number 31--301--48310--5, Organizational Maintenance 006 00 Center Section Access Doors 006 00 Center Section Assembly 006 00 General Maintenance Procedures 006 00 Hose Reel Assembly Maintenance 006 00 Introduction 006 00 Nose Cone Assembly 006 00 Nose Cone Door Assemblies 006 00 Preparation for Maintenance 006 00 Refueling Assembly 006 00 Tail Section Assembly 006 00 Test Procedures 006 00 Troubleshooting 006 00

Change 9 -- 15 February 2015 Page 2

Alphabetical Index (continued)

Title WP Number

Air Refueling Store Improved Power System (ARSIPS) Ram Air Turbine (RAT), Part Number 1706740, Depot Level Maintenance 009 00

Acceptance Test Specification 009 00 Assembly 009 00 Cleaning 009 00 Description of Function 009 00 Disassembly 009 00 Illustrated Parts Breakdown 009 00 Inspection 009 00 Introduction 009 00 Leading Particulars 009 00 Maintenance Concept 009 00 Repair 009 00 Storage 009 00 Testing 009 00 Troubleshooting 009 00

Controller Assembly, Part Number 49--104--1, Intermediate and Depot Maintenance 027 01 Assembly 027 01 Cleaning 027 01 Disassembly 027 01 Illustrated Parts Breakdown 027 01 Inspection 027 01 Introduction 027 01 Pre-inspection 027 01 Repair 027 01 Testing 027 01

Control Panel Assembly, Part Number E10--21433, Intermediate and Depot Maintenance 031 00 Assembly 031 00 Cleaning 031 00 Disassembly 031 00 Illustrated Parts Breakdown 031 00 Inspection 031 00 Introduction 031 00 Preinspection 031 00 Repair 031 00 Testing 031 00

Control Panel Assembly, Part Number E10--21109--1, Intermediate and Depot Maintenance 031 01 Assembly 031 01 Cleaning 031 01 Disassembly 031 01 Illustrated Parts Breakdown 031 01 Inspection 031 01 Introduction 031 01 Pre-inspection 031 01 Repair 031 01 Testing 031 01 Testing of PC Boards 031 01

Controller Assembly, Part Number 360--103--002, Intermediate and Depot Maintenance 027 00 Assembly 027 00 Cleaning 027 00 Disassembly 027 00 Illustrated Parts Breakdown 027 00 Inspection 027 00 Introduction 027 00 Pre--inspection 027 00 Repair 027 00 Testing 027 00

Change 9 -- 15 February 2015 Page 3

Alphabetical Index (continued)

Title WP Number

Description and Principles of Operation 003 00 Description 003 00 Principles of Operation 003 00 Purpose 003 00

Drogue Lighting Generator Assembly, Part Number 152--5101, 208--5022 and 269221, 029 00 Intermediate Maintenance

Assembly 029 00 Cleaning 029 00 Disassembly 029 00 Illustrated Parts Breakdown 029 00 Inspection 029 00 Introduction 029 00 Repair 029 00 Testing 029 00

Drum Assembly, Part Number 152--4106--1, Intermediate and Depot Maintenance 020 00 Assembly 020 00 Cleaning 020 00 Disassembly 020 00 Illustrated Parts Breakdown 020 00 Inspection 020 00 Introduction 020 00 Repair 020 00

Filter and Relief Valve Assembly, Part Number AD--B374--12M, Intermediate Maintenance 012 00 Assembly 012 00 Cleaning 012 00 Disassembly 012 00 Illustrated Parts Breakdown 012 00 Inspection 012 00 Introduction 012 00 Repair 012 00 Testing 012 00

Fuel Dump Valve, Part Number 2830160--102, Depot Level Maintenance 013 00 Assembly 013 00 Cleaning 013 00 Disassembly 013 00 Illustrated Parts Breakdown 013 00 Inspection 013 00 Introduction 013 00 Repair 013 00 Testing 013 00

Fuel Flow Transmitter, Part Number 151--005--001, Depot Level Maintenance 017 00 Assembly 017 00 Cleaning 017 00 Disassembly 017 00 Illustrated Parts Breakdown 017 00 Inspection 017 00 Introduction 017 00 Repair 017 00 Testing 017 00

Fuel Transfer Pump Assembly, Part Number 29340, Depot Level Maintenance 014 01 Assembly 014 01 Cleaning 014 01 Disassembly 014 01 Illustrated Parts Breakdown 014 01 Inspection 014 01

Change 9 -- 15 February 2015 Page 4

Alphabetical Index (continued)

Title WP Number

Introduction 014 01 Repair 014 01 Testing 014 01

Fuel Transfer Pump, Part Number 6179--1, Depot Level Maintenance 014 00 Assembly 014 00 Cleaning 014 00 Disassembly 014 00 Illustrated Parts Breakdown 014 00 Inspection 014 00 Introduction 014 00 Repair 014 00 Testing 014 00

Gear Case Assembly, Part Number 128D4050, Depot Level Maintenance 021 00 Introduction 021 00

Guillotine Assembly, Part Number 400000--3, Intermediate Level Maintenance 024 00 Assembly 024 00 Cleaning 024 00 Disassembly 024 00 Illustrated Parts Breakdown 024 00 Inspection 024 00 Introduction 024 00 Repair 024 00

Hose Reel Frame Assembly, Part Numbers 152--4105--3 and 152--4105--4, Intermediate and Depot Maintenance 034 00

Assembly 034 00 Cleaning 034 00 Disassembly 034 00 Illustrated Parts Breakdown 034 00 Inspection 034 00 Introduction 034 00 Repair 034 00

Hose Reel Hydraulic Motor, Part Number 68075, Depot Level Maintenance 022 00 Assembly 022 00 Cleaning 022 00 Disassembly 022 00 Illustrated Parts Breakdown 022 00 Inspection 022 00 Introduction 022 00 Preparation for Use 022 00 Repair 022 00 Testing 022 00 Troubleshooting 022 00

Hose Reel Lock Assembly, Part Number 400117--1, Intermediate Level Maintenance 023 00 Assembly 023 00 Cleaning 023 00 Disassembly 023 00 Illustrated Parts Breakdown 023 00 Inspection 023 00 Introduction 023 00 Repair 023 00 Testing 023 00

Change 9 -- 15 February 2015 Page 5

Alphabetical Index (continued)

Title WP Number

Hydraulic Boost Cylinder, Part Number E10--21932--1, Intermediate and Depot Maintenance 033 00 Assembly 033 00 Cleaning 033 00 Disassembly 033 00 Illustrated Parts Breakdown 033 00 Inspection 033 00 Introduction 033 00 Repair 033 00 Testing 033 00

Hydraulic Flow Control/Priority Valve and Signal Conditioning Unit, Part Number 29500 (Able) and 29163, Depot Level Maintenance 018 00

Assembly 018 00 Cleaning 018 00 Disassembly 018 00 Fault Isolation/Pre-Test 018 00 Illustrated Parts Breakdown 018 00 Inspection 018 00 Introduction 018 00 Repair 018 00 Testing 018 00 Troubleshooting 018 00

Hydraulic Flow Control/Priority Valve and Wire Harness, Part Number 61380--1, 61380--2 and 152--3077, Intermediate and Depot Level Maintenance 018 01

Assembly 018 01 Cleaning 018 01 Disassembly 018 01 Fault Isolation/Pre-Test 018 01 Illustrated Parts Breakdown 018 01 Inspection 018 01 Introduction 018 01 Repair 018 01 Testing 018 01

Hydraulic Motor Assembly (Fuel Transfer Pump), Part Number 68092, Depot Level Maintenance 015 01

Assembly 015 01 Cleaning 015 01 Disassembly 015 01 Illustrated Parts Breakdown 015 01 Inspection 015 01 Introduction 015 01 Repair 015 01 Testing 015 01 Troubleshooting 015 01

Hydraulic Motor Assembly (Fuel Transfer Pump), Part Number 624250, Depot Level Maintenance 015 00

Assembly 015 00 Cleaning 015 00 Disassembly 015 00 Illustrated Parts Breakdown 015 00 Inspection 015 00 Introduction 015 00 Repair 015 00 Testing 015 00 Troubleshooting 015 00

Change 9 -- 15 February 2015 Page 6

Alphabetical Index (continued)

Title WP Number

Hydraulic Pump, Part Number 65160, Depot Level Maintenance 010 00 Assembly 010 00 Cleaning 010 00 Disassembly 010 00 Illustrated Parts Breakdown 010 00 Inspection 010 00 Introduction 010 00 Preparation for Use 010 00 Repair 010 00 Testing 010 00 Troubleshooting 010 00

Hydraulic Reservoir Assembly, Part Number 3830045--104, Depot Level Maintenance 011 00 Assembly 011 00 Cleaning 011 00 Disassembly 011 00 Illustrated Parts Breakdown 011 00 Inspection 011 00 Introduction 011 00 Repair 011 00 Testing 011 00

Illustrated Parts Breakdown 008 00 Illustrated Parts Breakdown 008 00 Introduction 008 00

Paradrogue Assembly, Part Number 152--5084--1, Organizational, Intermediate…