Amen01 Downspout Detail.pdf

This is a technical architectural drawing depicting a downspout section detail for a building construction project. The drawing shows a three-part vertical cross-section illustrating the installation and integration of a downspout system from roof to foundation level.

The design specifications include a roof-mounted component featuring an 6-inch wide by 6-inch deep gutter with a 4-inch downspout leader, sheet metal fascia and downspout, vented aluminum soffit and J-trim, and connection to existing precast concrete. The mid-section shows termination of the sheet metal downspout into an inside steel tube downspout, which is then secured to an existing precast facade panel using galvanized steel straps with slotted holes and epoxy-set bolts. The ground-level detail includes a new concrete sidewalk with a 4-inch by 1.5-inch cleanout access hole with galvanized cover plate, a 4-inch galvanized steel pipe outlet, HCP provision at the pipe outlet location, a galvanized steel baseplate with leveling nuts and anchor bolts, grout below the outlet, and concrete footing. The drawing references structural plans for additional information regarding the drain pipe and grout specifications. This appears to be a schematic for commercial or institutional building construction with specific attention to proper water management and structural integration.