About this file

This is a solicitation notice for multi-media compliance services with an emphasis on fuel storage tanks/spills, air, and waste/materials. The services will be performed at various locations within the Naval Facilities Engineering Command Washington area of responsibility, including Virginia, Maryland, and the District of Columbia, as well as other U.S. and overseas installations. Offerors will perform multi-media compliance projects for stormwater, drinking water, wastewater, air quality, hazardous waste and materials, storage tanks, environmental management systems, other environmental liabilities, environmental planning, natural resources, and cultural resources. This is a lowest price technically acceptable procurement utilizing technical and price proposals under an indefinite-delivery/indefinite-quantity contract for a five-year ordering period and six-month option. The minimum guarantee is $50,000 and maximum fee is $30 million for the life of the contract. Firm fixed price task orders will normally range from $50,000 to $250,000.

View the file

Other files

File Type Posted
Amendment 0009 DOD SAFE INSTRUCTIONS 4.6.20.pdf PDF
Amendment 0008 4.1.20.pdf PDF
GOVT Responses to Remaining Inquiries Amend 0008 4.1.20.pdf PDF
Attachment G- GOVT RESPONSES TO PREAWARD INQUIRIES 3.27.20.pdf PDF
Amendment 0007 3.27.20 Govt. Responses, etc.pdf PDF
Amendment 0006 3.25.20.pdf PDF
ATTACHMENT D TABLE 2 Waste Materials- Air dated 3.4 A6.pdf PDF
ATTACHMENT B Past Performance Questionnaire A6.docx DOCX document
ATTACHMENT D TABLE 2 Waste Materials- Air dated 3.4 A6.docx DOCX document
ATTACHMENT B Past Performance Questionnaire A6.pdf PDF
Attachment C Table 1 Tanks Spills dated 3.4.20 A6.docx DOCX document
Attachment F- Storage Tank.Spill IDIQ Cost Template dated 3.4.20 A6.xlsx XLSX spreadsheet
Attachment A- Relevant Corp Experience Amend 0003A6.pdf PDF
Attachment A-Relevant Corp Experience Amend. 0003A6.docx DOCX document
Attachment C Table 1 Tanks Spills dated 3.4.20 A6.pdf PDF
Amendment 0005 3.24.20.pdf PDF
ATTACHMENT D TABLE 2 Waste Materials- Air dated 3.4.pdf PDF
Attachment F- Storage Tank.Spill IDIQ Cost Template dated 3.4.20.xlsx XLSX spreadsheet
Attachment A- Relevant Corporate Experience Amend 0003.docx DOCX document
ATTACHMENT D TABLE 2 Waste Materials- Air dated 3.4.20.docx DOCX document
ATTACHMENT B Past Performance Questionnaire.docx DOCX document
Attachment C Table 1 Tanks Spills dated 3.4.20.docx DOCX document
Attachment C Table 1 Tanks Spills dated 3.4.20.pdf PDF
Amendment 0004 3.24.20.pdf PDF
Attachment C - Revised Table 1 Tanks Spills Amend 0003.pdf PDF
Attachment F- Revised Storage Tank.Spill IDIQ Cost Template Amend 0003.xlsx XLSX spreadsheet
Attachment A- Relevant Corporate Experience Amend 0003.pdf PDF
Amendment 0002 2.18.20.pdf PDF
Amendment 0001 2.3.10.pdf PDF
Attachment C- TABLE 1 TANKS.SPILLS.docx.pdf PDF
Attachment E- Preaward Inquiry Form N4008020R0010.xls XLS spreadsheet
Attachment A- Corporate Experience Questionnaire.pdf PDF
Solicitation N4008020R0010.pdf PDF
WD 2015-4265 REV 12.pdf PDF
WD 2015-4280 REV 12.pdf PDF
WD 2015-4329 REV 12.pdf PDF
WD 2015-4281 REV 15.pdf PDF
Attachment D- TABLE 2 WASTE.MATERIALS- AIR.pdf PDF
Attachment F- Storage Tank.Spill IDIQ Cost Template.xlsx XLSX spreadsheet
Attachment B- Past Performance Questionnaire.pdf PDF
WD 2015-4269 REV 11.pdf PDF
Show all 41

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

N4008020R0010

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

N40080-20-R-0010 Multi-Medical Environmental Compliance Services- Fuel Storage, Tank Spill, Air and Waster Material Services

See Block 14 Continuation page 2.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 25

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 27-Feb-2020

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N4008020R0010

X 9B. DATED (SEE ITEM 11)

21-Jan-2020

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

27-Feb-2020

CODE

NAVAL FACILITIES ENG COMMAND

1314 HARWOOD STREET SE

WASHINGTON DC 20374

N40080 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

AMENDMENT 0003

The purpose of this amendment is to do the following:

1. Change proposal due date to April 1, 2020 at 1:00 PM EST (Eastern Standard Time).

2. Revised Generation information in Section A to reflect revised NAICS 541620 and revise the range for task orders to $10,000 to $1,000,000 per order.

3. Change minimum quantity under Section B from $50,000.00 to $10,000.00.

4. Revise the Statement of Work in Section C. (Revised Statement of Work included in this amendment)

5. Update Clause in Section I 52.216-19 Order Limitations. Minimum Order- $10,000.00

6. Change the Preaward Inquiries/Requests for Information cutoff date from February 27, 2020 at 12:00 pm to March 11, 2020 at 12:00 PM EST (Eastern Standard Time) in Section L.

7. Provide Attachment A- Revised Relevant Corporate Experience Amend 0003 Data Sheet in Section J (see Beta.SAM.gov website for attachment.)

8. Provide Attachment C- Revised Table 1 Tanks/Spills Amend 0003 in Section J (see Beta.SAM.gov website for attachment.)

9. Provide Attachment F- Revised Storage Tank Spill IDIQ Cost Template Amend 0003 in Section J (see Beta.SAM.gov website for attachments.)

10. Under Section K, Revise Clause 52.204-8 to reflect revised of NAICS 541620 and the small business size of $16.5 M.

11. Under Section L, Revised page count and price template in Clause 5252.215-9300 Content of Proposals

(FEB 2016).

12. Revise Evaluation Factors for Award in Section M

The following is an updated List of Attachments have been provided via Beta.SAM.gov website)

BOLDED ATTACHMENTS WERE REVISED.

ATTACHMENT A- REVISED RELEVANT CORPORATE EXPERIENCE Amend 0003

ATTACHMENT B- PAST PERFORMANCE QUESTIONNAIRE

ATTACHMENT C- REVISED TABLE 1- TANKS/SPILLS Amend 0003

ATTACHMENT D- TABLE 2- WASTER/MATERIALS-AIR

ATTACHMENT E- PREAWARD INQUIRY FORM N4008020R0010

ATTACHMENT F- REVISED STORAGE TANK SPILL IDIQ COST TEMPLATE Amend 0003

A forthcoming amendment to answer the first round of Preaward Inquires/Requests for Information provided on January 31, 2020 will be issued.

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 25-Feb-2020 01:00 PM to 01-Apr-2020 01:00 PM.

The following have been modified:

GENERAL INFORMATION

A.1 CONTRACT TITLE: Multi-Medical Environmental Compliance Services- Fuel Storage, Tank Spill, Air, and Waste Material Services

A.2 SET-ASIDE: Total 100% small business set aside. Refer to Seciton I

A.3 NAICS CODE: 541620. Refer to Beta.SAM.gov website.

A.4 BID GUARANTEE/BONDING REQUIREMENTS: A bid guarantee is not required.

A.5 CONTRACT TERM: The resulting award will provide for a five-year ordering period and the

FederalAcquisition Regulation (FAR) 52.217-8 Option Period, for up to six months, if necessary. The total period of performance is not to exceed a total of 66 months

A.6 PLACE OF PERFORMANCE: Services will be performed within NAVFAC Washington area of responsibility primarily theWashington DC, Maryland and Virginia and also US Territories

A.7 PERIOD OF PERFORMANCE: The start date is (will be determined at time of award) and the completion date

(will be determinted at time of award). Refer to Section H, Special Contract Requirements.

A.8 TASK ORDER RANGE The task orders will be firm-fixed-priced, normally in the range of $10,000 to

$1,000,000 per order.

SECTION B - SUPPLIES OR SERVICES AND PRICES

SECTION B

CONTRACT MINIMUM/MAXIMUM QUANTITY AND CONTRACT VALUE

The minimum quantity and contract value for all orders issued against this contract shall not be less than the minimum quantity and contract value stated in the following table. The maximum quantity and contract value for all orders issued against this contract shall not exceed the maximum quantity and contract value stated in the following table.

MININUM MAXIMUM

QUANTITY QUANTITY

$10,000.00 $30,000,000.00

CLIN DELIVERY/TASK ORDER MINIMUM/MAXIMUM QUANTITY AND CLIN ORDER VALUE

The minimum quantity and order value for the given Delivery/Task Order issued for this CLIN shall not be less than the minimum quantity and order value stated in the following table. The maximum quantity and order value for the given Delivery/Task Order issued for this CLIN shall not exceed the maximum quantity and order value stated in the following table.

CLIN MINIMUM MINIMUM MAXIMUM MAXIMUM

QUANTITY AMOUNT QUANTITY AMOUNT

0001 $ $

0002 $ $

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

SECTION C

PERFORMANCE WORK STATEMENT/STATEMENT OF WORK FOR MULTI-MEDIA

COMPLIANCE: STORAGE TANK/SPILL, AIR AND WASTE/MATERIALS SERVICES

Date: 2/24/2020

PART 1.0 GENERAL DESCRIPTION AND PERSONNEL REQUIREMENTS

C.1 GENERAL

The intention for this contract is to provide a full range of multi-media environmental compliance services with an emphasis on Fuel Storage Tanks/Spill, Air, and Waste/Materials. This basic contract will be tailored to identify specific Contract Task Order (CTO) requirements. A firm-fixed price, Indefinite Delivery/Indefinite Quantity (ID/IQ) contract will be established to perform the required services and shall be performed as outlined below.

C.2 PERFORMANCE OBJECTIVES

The Contractor will provide the full range of methods and technologies supporting activities necessary to be in compliance with environmental laws and regulations and meeting budgets and schedules. Requirements shall be carried out under CTOs for various locations primarily within Naval Facilities Engineering Command Washington footprint. To a lesser extent, work may occur at any sites located in the lands and waters of the Continental United States (CONUS) that support the U.S. Navy, Marine Corps and other federal entities. The exact location of the required effort will be specified in the individual CTOs.

CTOs will be either presented as a statement of work or as a performance-based product delivery, where desired outcomes of the work are identified without specifying the methods or technologies to be used. Contracted work is performed with minimal focus on government process and maximum focus on results. A results-based product delivery CTO enables the Contractor to select actions best suited to the site requirements and ensures that the most up-to-date and best management practices are employed.

C.2.1 GENERAL INFORMATION

The Contractor shall conduct such work to enable the customer to be in compliance with all applicable laws and regulations. The Contractor shall engage early in the process to allow for the development of the most cost-effective and technically sound solution and use its expertise to recognize and address problematic issues in executing work under the CTOs. Typical activities may include, but are not limited to, the following:

Primary Scope Storage Tank and Spill Compliance:

• Prepare tank management plans

• Complete tank and oil/water separator cleaning

• Prepare tank inventories

• Prepare SPCC plans

• Prepare FRPs and SCPs

• Conduct integrity testing of tanks and piping

• Complete formal internal and external tank inspections

• Perform tank removals, replacements, and installations

• Perform tank repairs and maintenance to meet environmental regulations

• Perform fuel storage system maintenance

• Perform leaking UST site assessments and remediation

• UST removal/in-situ closure

• Perform fuel spill site assessments and remediation

• Other tank and spill related tasks

Air Quality and Clean Air Act Compliance:

• Air emissions inventory

• Preparing major and minor source air permit application and renewal

• Preparation of semi-annual and annual compliance and emissions reporting as required by installation permits

• Preparation or revision of facility compliance tools or databases

• Providing equipment operator training

• Performance of regulatory compliance evaluations and determinations

• Complete Stage I and Stage II vapor recovery system testing and certification

• Ozone depleting substance compliance and recordkeeping evaluation and support

• Complete air emission and dispersion modeling

• National emissions standard for hazardous air pollutant (NESHAP) review and applicability determination

Complete emission testing

• Other air related tasks

Waste and Materials Compliance:

• EPCRA reports

• Hazardous Waste Management plans

• Waste streams sampling and analysis

• Waste stream determination

• Integrated Solid Waste Management plans

• Asbestos surveys and testing

• Asbestos Management Plans

• Lead-Based Paint surveys and testing

• Lead-Based Paint Management Plans

• Radon surveys and testing

• Asbestos abatement

• Lead-Based Paint abatement

• Radon mitigation

• Other waste related tasks

Secondary Scope Stormwater Compliance:

• Survey, inspection and design of Low Impact Development (LID) facilities and stormwater Best Management Practices (BMP) and post construction award services

• Preparation or review of LID and structural and nonstructural BMP documentation

• Develop maintenance manuals for LID/BMP features

• Inventory and documentation for LID/BMP features

• Assess and evaluate the condition of stormwater system and components

• Maintenance and repairs of LID/BMP features

• Permit application and support

• Identify non-point source pollution areas including land use changes

• Investigation and evaluation of illicit discharges

• Stormwater and ambient water quality sampling and analysis including associated Quality Assurance and/or Sampling Analysis plans and self-monitoring reports

• Development of Geographic Information Systems (GIS) data and computer aided design and drafting drawing production

• Developing storm water pollution prevention plans and site compliance evaluations

Wastewater Compliance:

• Wastewater evaluation, investigation, and reuse studies

• Inflow and infiltration studies

• POTW pretreatment applications

• Wastewater permit compliance sampling and analysis

• Sludge and wastewater characterization sampling and analysis

• Preparation of operation and maintenance manuals for wastewater treatment plants

• Sludge management and disposal plans (including land application)

• Industrial wastewater management and pollution minimization plans

• Conveyance system mapping using Geographic Information System (GIS) data obtained through surveying

• Preparing NPDES permit applications and monitoring reports for indirect and direct wastewater discharges for wastewater collection and treatment systems

• Conducting wastewater treatment plant operational evaluations

• Conducting industrial wastewater surveys

• Providing operator training

• Illicit discharge studies

• Other wastewater related tasks

Drinking Water Compliance:

• Source water (surface and groundwater) protection and water quality evaluations

• Sanitary surveys

• Water leakage surveys or investigations and water audits

• Condition Assessments

• Developing vulnerability assessment/emergency response plans

• Completion of various studies: Water conservation, Corrosion control

• Wellhead Protection Assessments

• Drinking water characterization sampling and analysis

• Preparation of operation and maintenance manuals for drinking water treatment plants

• Evaluations for the Upgrading or improving of the operation of existing drinking water facilities

• Distribution system mapping using Geographic Information System (GIS) data obtained through surveying

• Development of sampling monitoring plans

• Hydraulic modeling of distribution systems

• Other drinking water related tasks

Environmental Management System (EMS):

• Training and auditing

• Other EMS related tasks

Other Environmental Liabilities (OEL):

• The OEL Sustainment Process addresses environmental liabilities for a broad range of Navy and Marine

Corps assets, including: facilities, structures, utilities, land, relocatables and non-military equipment

• Assisting in field data collection for new and existing OEL Units

• Populating the OEL Module of the iNFADS database

• Creating and updating cost estimates for new and existing OEL Units

• Completing and submitting Cost Certification Reports

• Other OEL related tasks

Environmental Planning:

• Environmental Assessments (EA)

• Environmental Impact Statements (EIS)

• Studies to support an EA or EIS.

• Other environmental planning related tasks

Natural/Biological Resources:

• Wetlands Delineations, Studies, and Restoration

• Coastal Zone Management, Consistency Determinations and Shoreline Studies Benthic and Water Quality

Studies

• Rare, Threatened and Endangered Species Surveys, assessments and consultations

• Landscape Design/Management

• Aerial Photogrammetric and GIS Mapping

• Natural Resource Damage Assessments

• Forest Inventories and Studies

• Integrated Natural Resource Management Plans

• Bird Avoidance Modeling/Bird/Deer Aircraft Strike Hazard

• Treat and/or eliminate invasive/nuisance plants or animal species

• Other natural/biological resource tasks

Cultural Resources:

• Conduct Phase I, II, and III cultural resources investigations/surveys

• Other cultural resources related tasks

Environmental Restoration:

• Support of Environmental Baseline Surveys (EBS) and Phase I and II Hazardous, Toxic, and Radiological Waste (HTRW) Surveys for real estate actions associated with property acquisition and excessing

• Support of the Defense Department's Environmental Restoration Program in compliance with the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) of 1980 as amended by the Superfund Amendments and Reauthorization Act (SARA) of 1986 and Resource Conservation and Recovery Act (RCRA)

• Support of environmental documentation for base closure efforts

• Perform long term monitoring requirements including CERCLA five year reviews

• Support of assessments, studies, investigations, remedial designs that require coordination with, and understanding of other environmental programs such as air, water, waste water, solid waste, asbestos, and hazardous substance/waste management and complex compliance requirements requiring the integration of knowledge from several media and statues

• Support of site investigation and remediation of unexploded ordnance (UXO) and associated contamination Support of the Navy’s Range Sustainability Environmental Program Assessment (R.S.E.P.A) program

• Other installation restoration related tasks

C.3 PERSONNEL QUALIFICATIONS

The proposed teams shall be multi-disciplinary and shall demonstrate appropriate disciplines to perform the types of work addressed above. The Contractor shall furnish sufficient technical, management and administrative personnel at all times to ensure timely execution of the work.

If, during the performance of this contract, the Contractor must remove, replace, or divert any of the listed or specified personnel, the Contractor must: (1) Notify the Contracting Officer and the Contracting Officer Representative (COR) within (3) three business days; (2) submit justification (including proposed substitutions) in sufficient detail to permit evaluation of the impact on this contract; and (3) obtain the Contracting Officer's written approval. Notwithstanding the foregoing, if the Contractor deems immediate removal or suspension of any member of its management team is necessary to fulfill its obligation to maintain satisfactory standards of employee competency, conduct, and integrity the Contractor may remove or suspend such person at once, although the Contractor must notify Contracting Officer and the COR prior to or concurrently with such action.

If Qualified Personnel are found to devote less effort than stated in the technical proposal or are performing unsatisfactorily, the KO may direct replacement of such personnel, modify or terminate the task order or contract, whichever is appropriate.

The Contracting Officer reserves the right to request resumes and documentation at any time to verify qualifications, and to require such documentation prior to use of personnel on any contract task order. Personnel qualification must include but is not limited to the following:

Principal/Program Manager. Person that is a principal, officer or senior manager of the contractor with full and unlimited authority to represent the interest of the contractor in all matters relating to the contract or to a specific Contract Task Order (CTO). The Program Manager shall be responsible for liaison between contract personnel and the Contracting Officer (KO), Contracting Officer’s Representative (COR) or Navy Technical Representative (NTR), and for maintaining a fully staffed and equipped work force. CTO negotiations shall be accomplished on a one-to-one basis between the Principal/Program Manager and the Contracting Officer. The Principal/Program Manager shall have a minimum of 10 years of full time professional experience in project management, and shall have a minimum of 2 years of experience in a program manager capacity.

QA/QC Manager. The Quality Assurance/Quality Control (QA/QC) Manager shall have a minimum of 5 years of QA/QC experience, with at least 1 of those years involved with multimedia environmental projects. Responsibilities include developing, maintaining and enforcing the contractor’s QA/QC Program.

Project Manager. Minimum of 5 years of experience of full-time professional experience in Fuel Storage Tanks/Spill, Air, and Waste/Materials. Each Project Manager is not required to demonstrate experience in all categories. Collectively, the Project Manager’s resumes must demonstrate experience in all categories with a minimum of a BS degree. Project Managers must have at least 2 years full-time professional experience as a Project Manager for similar scope projects in Maryland, Virginia, and the District of Columbia. Each Project Manager is not required to demonstrate experience in all regulatory jurisdictions. Collectively, the Project Manager’s resumes must demonstrate experience in Maryland, Virginia, and the District of Columbia. The Project Manager coordinates the efforts of the other disciplines (including sub-contractors), ensuring timeliness, forecasting delays, financial performance, etc. Additionally, this person will be the main point of contact for all required results and/or progress on projects.

Technical Specialist. This position shall be filled by persons with a BS degree in the appropriate engineering/science discipline and 10 years in a technical specialty that does not typically fall into one of the standard environmental engineering or science categories. This person would typically have a PhD or some other specific training/certification/specialization that is required for the project.

Senior Engineer. This position shall be filled by persons with a BS degree in the appropriate engineering discipline and 10 years of specifically related experience. Responsible for managing technical groups and/or management of projects of significance, prepares estimates, schedules work to meet completion dates, reviews progress, evaluates results, makes changes in methods or equipment, performs technical work in support of project efforts and may serve as a site manager on major field efforts.

Mid-Level Engineer. This position shall be filled by persons with a BS degree in the appropriate engineering discipline and 5 years of specifically related experience. Collects and analyzes data, develops sections of reports and assists in development and design of projects. Capable of leading projects with a mid to low degree of difficulty.

Junior Engineer. This position shall be filled by persons with a BS degree in the appropriate engineering discipline with 0 to 5 years of experience. This position documents/evaluates projects/experiments and largely collects and compiles data.

Senior Scientist/Geologist. This position shall be filled by persons with a BS degree in the appropriate science discipline and 10 years of specifically related experience. Responsible for managing technical groups and/or management of projects of significance, prepares estimates, schedules work to meet completion dates, reviews progress, evaluates results, makes changes in methods or equipment, performs technical work in support of project efforts and may serve as a site manager on major field efforts.

Mid-Level Scientist/Geologist. This position shall be filled by persons with a BS degree in the appropriate science discipline and 5 years of specifically related experience. Collects and analyzes data, develops sections of reports and assists in development and design of some aspects of a project.

Junior Scientist/Geologist. This position shall be filled by persons with a BS degree in the appropriate science discipline. Documents/evaluates projects/experiments and largely collects and compiles data.

Senior Field Technician. Minimum of 10 years of full-time professional experience in Fuel Storage Tanks/Spill, Air, and Waste/Materials. Each Senior Technician is not required to demonstrate experience in all categories.

Collectively, the Senior Technician’s resumes must demonstrate experience in all categories. The qualified individual for this position is responsible for major field operations, performs more complex/sophisticated assignments, supervises lower level technicians. Performs field testing and prepares reports associated with data collection.

Senior Field Technicians who work on tanks shall have a minimum of 10 years of full-time professional experience in the repair, maintenance, testing, system design, installation, and removal/remediation of fuel storage tank systems (both above-ground and underground tanks) and be licensed to work with tanks in Maryland, Virginia, and the District of Columbia. Each Senior Technicians is not required to demonstrate licensure in all regulatory jurisdictions. Collectively, the Senior Technicians must have licensure in Maryland, Virginia, and the District of Columbia.

Mid-Level Field Technician. Minimum of 5 years of full-time professional experience in Fuel Storage Tanks/Spill, Air, and Waste/Materials.. Each Technician is not required to demonstrate experience in all categories. Collectively, the Technician’s must have experience in all categories.. The qualified individual for this position performs non-routine and complex assignments; performs technical services, experiments or tests which may require non-standard procedures and complex equipment, programs and/or instrumentation; records computes and analyzes test or study data; prepares appropriate documentation and may supervise lower level technicians.

Mid-Level Field Technicians who work on tanks shall have a minimum of 5 years of full-time professional experience in the repair, maintenance, testing, system design, installation, and removal/remediation of fuel storage tank systems (both above-ground and underground tanks). Each Technician is not required to demonstrate experience in all categories. Collectively, the Technician’s must have experience in all categories.

Junior Field Technician/Laborer. Minimum of 2 years of full-time professional experience in Fuel Storage Tanks/Spill, Air, and Waste/Materials. Each Technician is not required to demonstrate experience in all categories.

Collectively, the Technician’s must have experience in all categories. The qualified individual for this position performs assignments that are normally standardized, may troubleshoot malfunctioning equipment or programs and make simple repairs, extracts and processes test or study data.

Junior Field Technicians/Laborers who work on tanks shall have a minimum of 2 years of full-time professional experience in the repair, maintenance, testing, system design, installation, and removal/remediation of fuel storage tank systems (both above-ground and underground tanks). Each Technician is not required to demonstrate experience in all categories. Collectively, the Technician’s must have experience in all categories.

GIS Analyst. Minimum of 5 years of computer mapping experience with ESRI compatible products. The analyst must be able to collect and interpret mapping data from a variety of sources including field survey data and aerial photography. Knowledge of RDMS (Relational Database Management Systems) and SQL (Structural Query Languages) such as Oracle is required. Produces engineering drawing and other documents from data.

CAD Operator. This position requires someone with demonstrated knowledge and skill in computer graphics or mapping techniques. Produces engineering drawing and other documents from data.

Health & Safety Manager. Minimum of 2 years of experience with environmental sites where EPA Level C and/or Level B personal protective equipment was in use. Has specialized training in personal and respiratory protective equipment, program implementation, proper use of air monitoring instruments, air sampling methods, and interpretation of results. Has working knowledge of applicable Federal, State, and local occupational safety and health regulations. Responsibilities include ensuring that the elements of the approved site health and safety plan are implemented and enforced on site. Closely monitors worker compliance/accident statistics and implements corrective action.

Administrative. This position requires someone with demonstrated ability to handle administrative duties.

Compiles and maintains files and records for project invoices and correspondence. Supports contract from proposal development through project closeout.

Senior Contracts. Minimum of 10 years of experience with government contracting.

Junior Contracts. Minimum of 2 years of experience with government contracting.

Tank Inspectors. Minimum of 10 years of full-time professional experience in fuel storage tank inspection of above-ground shop tanks, above-ground field erected tanks, and under-ground tanks. Each employee is not required to demonstrate experience in all categories. Collectively, the Tank Inspectors must demonstrate experience in all categories.

Certifications

1. The Contractor shall furnish staff with the following certificates: At least 1 employee who holds a AHERA Asbestos Management Planner certificate;

2. At least 1 employee who holds a AHERA Asbestos Project Design Manager certificate;

3. At least 1 employee who is certified by National Radon Proficiency Program (NRPP) or National Radon

Safety Program (NRSB) to conduct Radon testing;

4. At least 1 employee who is accredited per AHERA as an asbestos inspector;

5. At least 1 employee who is certified to perform inspections and/or surveys required under 40 CFR 745, 26

COMAR 16.01, 20 DCMR, and 9-VAC-20;

6. At least 4 employees who hold STI SP001 Inspector certificates;

7. At least 2 employees who hold NACE Corrosion and Cathodic Protection Technician certificates;

8. At least 1 employee who holds a ASNT SNT-TC-1A Ultrasonic Technician certificate;

9. At least 2 employees who hold Confined Space Entry certificates;

10. At least 1 Lead Project Designer

11. The Offeror must hold a Maryland Underground Storage Tank Technician, Inspector, Installer/Remover certificate

12. The Offeror must hold a District of Columbia Underground Storage Tank Installer, Remover, and Tester certificate.

The following have been deleted:

STATEMENT OF WORK

SECTION I - CONTRACT CLAUSES

52.216-19 ORDER LIMITATIONS (OCT 1995)

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than $10,000.00, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor -

(1) Any order for a single item in excess of $30,000,000.00;

(2) Any order for a combination of items in excess of $30,000,000.00 or

(3) A series of orders from the same ordering office within 15 days that together call for quantities exceeding the limitation in paragraph (b) (1) or (2) of this section.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.

(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 15 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

(End of clause)

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND OTHER STATEMENTS OF OFFERORS

52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2018)

(a)(1) The North American Industry Classification System (NAICS) code for this acquisition is 541620.

(2) The small business size standard is $16,500,000.00

(3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.

(b)(1) If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies.

(2) If the provision at 52.204-7, System for Award Management, is not included in this solicitation, and the Offeror has an active registration in the System for Award Management (SAM), the Offeror may choose to use paragraph (d) of this provision instead of completing the corresponding individual representations and certifications in the solicitation. The Offeror shall indicate which option applies by checking one of the following boxes:

( ) Paragraph (d) applies.

( ) Paragraph (d) does not apply and the offeror has completed the individual representations and certifications in the solicitation.

(c) (1) The following representations or certifications in SAM are applicable to this solicitation as indicated:

(i) 52.203-2, Certificate of Independent Price Determination. This provision applies to solicitations when a firm-fixed-price contract or fixed-price contract with economic price adjustment is contemplated, unless—

(A) The acquisition is to be made under the simplified acquisition procedures in Part 13;

(B) The solicitation is a request for technical proposals under two-step sealed bidding procedures; or

(C) The solicitation is for utility services for which rates are set by law or regulation.

(ii) 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions. This provision applies to solicitations expected to exceed $150,000.

(iii) 52.203-18, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements--Representation. This provision applies to all solicitations.

(iv) 52.204-3, Taxpayer Identification. This provision applies to solicitations that do not include the provision at 52.204-7, System for Award Management.

(v) 52.204-5, Women-Owned Business (Other Than Small Business). This provision applies to solicitations that—

(A) Are not set aside for small business concerns;

(B) Exceed the simplified acquisition threshold; and

(C) Are for contracts that will be performed in the United States or its outlying areas.

(vi) 52.209-2; Prohibition on Contracting with Inverted Domestic Corporations--Representation.

(vii) 52.209-5; Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold.

(viii) 52.209-11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. This provision applies to all solicitations.

(ix) 52.214-14, Place of Performance--Sealed Bidding. This provision applies to invitations for bids except those in which the place of performance is specified by the Government.

(x) 52.215-6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government.

(xi) 52.219-1, Small Business Program Representations (Basic & Alternate I). This provision applies to solicitations when the contract will be performed in the United States or its outlying areas.

(A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the Coast Guard.

(B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard.

(xii) 52.219-2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract will be performed in the United States or its outlying areas.

(xiii) 52.222-22, Previous Contracts and Compliance Reports. This provision applies to solicitations that include the clause at 52.222-26, Equal Opportunity.

(xiv) 52.222-25, Affirmative Action Compliance. This provision applies to solicitations, other than those for construction, when the solicitation includes the clause at 52.222-26, Equal Opportunity.

(xv) 52.222-38, Compliance with Veterans' Employment Reporting Requirements. This provision applies to solicitations when it is anticipated the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial items.

(xvi) 52.223-1, Biobased Product Certification. This provision applies to solicitations that require the delivery or specify the use of USDA-designated items; or include the clause at 52.223-2, Affirmative Procurement of Biobased Products Under Service and Construction Contracts.

(xvii) 52.223-4, Recovered Material Certification. This provision applies to solicitations that are for, or specify the use of, EPA- designated items.

(xviii) 52.223-22, Public Disclosure of Greenhouse Gas Emissions and Reduction Goals--Representation. This provision applies to solicitations that include the clause at 52.204-7.)

(xix) 52.225-2, Buy American Certificate. This provision applies to solicitations containing the clause at 52.225-1.

(xx) 52.225-4, Buy American--Free Trade Agreements--Israeli Trade Act Certificate. (Basic, Alternates I, II, and III.) This provision applies to solicitations containing the clause at 52.225- 3.

(A) If the acquisition value is less than $25,000, the basic provision applies.

(B) If the acquisition value is $25,000 or more but is less than $50,000, the provision with its Alternate I applies.

(C) If the acquisition value is $50,000 or more but is less than $80,317, the provision with its Alternate II applies.

(D) If the acquisition value is $80,317 or more but is less than $100,000, the provision with its Alternate III applies.

(xxi) 52.225-6, Trade Agreements Certificate. This provision applies to solicitations containing the clause at 52.225- 5.

(xxii) 52.225-20, Prohibition on Conducting Restricted Business Operations in Sudan--Certification. This provision applies to all solicitations.

(xxiii) 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran—Representation and Certification. This provision applies to all solicitations.

(xxiv) 52.226-2, Historically Black College or University and Minority Institution Representation. This provision applies to solicitations for research, studies, supplies, or services of the type normally acquired from higher educational institutions.

(2) The following representations or certifications are applicable as indicated by the Contracting Officer:

[Contracting Officer check as appropriate.]

(i) 52.204-17, Ownership or Control of Offeror.

(ii) 52.204-20, Predecessor of Offeror.

(iii) 52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products.

(iv) 52.222-48, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Certification.

(v) 52.222-52 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Certification.

(vi) 52.223-9, with its Alternate I, Estimate of Percentage of Recovered Material Content for EPA- Designated Products (Alternate I only).

(vii) 52.227-6, Royalty Information.

(A) Basic.

(B) Alternate I.

(viii) 52.227-15, Representation of Limited Rights Data and Restricted Computer Software.

(d) The Offeror has completed the annual representations and certifications electronically in SAM accessed through https://www.sam.gov. After reviewing the SAM information, the Offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in paragraph (c) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [ offeror to insert changes, identifying change by clause number, title, date]. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

FAR Clause Title Date Change

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on SAM.

(End of provision)

SECTION L - INSTRUCTIONS, CONDITIONS AND NOTICES TO BIDDERS

5252.215-9300 Content of Proposals.

CONTENT OF PROPOSALS (FEB 2016)

(a) PROPOSAL REQUIREMENTS. The price/cost proposal and non-price proposal shall be submitted in separate volumes. The non-price proposal shall not contain any cost/pricing information. The non-price proposal presented by the offeror to whom the award is made will be incorporated into the contract at time of award.

(b) The offeror shall submit the following information:

(1) Price Proposal Binder 1: 2 (1 original and 1 copy) copies of the cost/price proposal. With the price proposal, submit the following:

a) Executed SF33. Offeror shall insert its company name and address in Block #13, telephone number in Block #15B, acknowledge all amendments in Block #14 (if applicable), name and title of person authorized to sign in Block #16, signature in Block #17, and offer date in Block #18 of the SF33. In addition, offeror shall provide its DUNS Number, CAGE code, and Federal Tax ID number with its proposal.

b) Offerors shall utilize the pricing attachment provided as “Attachment F Revised Storage Tank/Spill, Air and Waster/Materials Services IDIQ Cost Tmeplate” to submit pricing.

Because the pricing evaluation will concentrate on the electronic files submitted, in the event of a discrepancy between the price proposal hard copies and the price proposal electronic copies, the price proposal electronic copies will take precedence.

c) Submit individual representations and certifications if System for Award Management (SAM) representations and certifications are not complete in accordance with FAR 52.204- 7.

d) Provide confirmation of most recent VETS-4212 filing or an explanation of the offeror’s exemption from this requirement.

e) Submit one copy of the entire Price Proposal on CD in readable/searchable electronic format and filed inside the cover of the "Original" hard copy Price Proposal binder. Acceptable readable/searchable formats include MS Word, Excel, and searchable PDF. Note: do NOT .submit a USB flash/jump drive in lieu of CD

f) Paper should be white, 8 ½ by 11 inches and have margins of 1 inch on all four sides. Text will be black utilizing a minimum Arial Font of 11 with pages numbered.

g) Double-sided printing is permitted.

h) There is no page limitation on the pricing proposal.

(2) Non-Price Proposal Binder 2: 5 (1 original and 4 copies) copies of the non-price proposal. With the non-price proposal, submit the following:

a) If joint venture is being proposed, include copy of the joint venture agreement signed by the appropriate individuals of each firm. Agreements must include company name, DUNS number, address, point of contact, email address, phone number and fax number for the joint venture and each member of the joint venture. The agreements shall demonstrate the relationship between firms and identify contractual relationships and authorities to bind the firm/joint venture/team/partnership.

b) Submit all Non-Price factor requirements divided. Each Non-Price factor must have an individual tab divider

c) Submit one copy of the entire Non-Price Proposal on CD in readable/searchable electronic format and filed inside the cover of the "Original" hard copy Non-Price Proposal binder.

Acceptable readable/searchable formats include Word, Excel, and searchable PDF. Note: Do NOT submit a USB flash/jump drive in lieu of CD.

d) The non-price proposal shall not exceed 150 pages. Blank tab dividers are excluded from the page limitation. Past Performance Questionnaires and Contractor Performance Assessment Reports will not count towards the page limitations.

(e) Offerors shall put company name on every Non-Price page. Paper will be white, 8 ½ by 11 inches and have margins of 1 inch on all four sides. Text will be black utilizing a minimum Arial Font of 11 with pages numbered.

(f) All binder covers and spine inserts will contain the solicitation number and title, the offeror’s name including individual point of contact, with phone number AND email address.

(End of clause)

SECTION M - EVALUATION FACTORS FOR AWARD

M2. REVISED EVALUATION FACTORS FOR AWARD

D. EVALUATION FACTORS FOR AWARD

1. The solicitation requires the evaluation of price and the following non-price factors:

Factor 1 – Technical/Management Approach Factor 2 – Corporate Experience/Personnel Qualifications Factor 3 – Safety Factor 4 – Past Performance

The distinction between corporate experience and past performance is corporate experience pertains to the types of work and volume of work completed by a contractor that are comparable to the types of work covered by this requirement, in terms of size, scope, and complexity. Past performance pertains to both the relevance of recent efforts and how well a contractor has performed on the contracts.

2. Basis of Evaluation and Submittal Requirements for Each Factor.

(a) Price:

(1) Solicitation Submittal Requirements:

Provide one (1) original, one (1) copy and one electronic copy (CD format) of the solicitation submittal requirements identified below:

(i) Executed SF33. Offeror shall insert its company name and address in Block #13, telephone number in Block #15B, acknowledge all amendments in Block #14 (if applicable), name and title of person authorized to sign in Block #16, signature in Block #17, and offer date in Block #18 of the SF33. In addition, offeror shall provide its DUNS Number, CAGE code, and Federal Tax ID number with its proposal.

(ii) Offerors shall submit one set of fully burdened rates. The fully burdened rates submitted must include costs for all firms proposed under Factor 1 as well as direct labor, indirect costs, overhead, general & administrative, profit, and escalation rate (applicable to Years 2-5 and the 6 month option period), for each labor classification necessary to support this project.

The offeror must submit the price proposal using Attachment F- Revised Storage Tank/Spill, Air and Waste/Materials Services IDIQ Cost Template provided.

(iii) SAM registration. Offeror shall ensure current registration on the SAM Website, www.sam.gov, including Annual Representations and Certifications are complete and updated for this procurement at the time the offer is submitted. If a Representation of Certification required by Section K of the RFP is not provided in SAM, include the representation or certification in your price proposal.

(iv) FAPIIS Certification. Offeror shall ensure that the information provided in Federal

Awardee Performance and Integrity Information System (FAPIIS) is current, accurate, and complete.

(v) VETS-4212 registration. If the Offeror is required to submit a VETS-4212 report, the Offeror shall ensure it has submitted a current VETS-4212 report to the Department of Labor (DOL) website, http://www.dol.gov/vets/vets4212.htm. An email confirmation of the submission can be requested and received by the Offeror from the DOL website and submitted in the price proposal. If the Offeror is not required to submit a report to VETS-4212, the Offeror shall include a brief statement and justification explaining why the Offeror is not required to submit a report. Offerors may visit the VETS-4212 website to obtain information on whether your company is required to submit a VETS-4212 report.

(2) Basis of Evaluation: The Government will evaluate each offeror's total proposed price for fairness and reasonableness. The Government will evaluate each offeror’s burdened hourly rates against the number of labor hours that are anticipated for use during the five (5) year ordering period of performance (CLIN 0001) and the extension of services (CLIN 0002). The total price will consist of the basic requirement (CLIN 0001) and option for extension of services for six (6) months (CLIN 0002). (See FAR Clause 52.217-8).

Analysis will be performed by one or more of the following techniques to ensure a fair and reasonable price:

(i) Comparison of proposed prices received in response to the RFP.

(ii) Comparison of proposed prices with the IGE.

(iii) Comparison of proposed prices with available historical information.

(iv) Comparison of market survey results.

The Government intends to evaluate the FAR 52.217-8 Option, and has included the provision FAR 52.217-5, Evaluation of Options (JUL 1990) in Section M of the solicitation.

In accordance with FAR 52.217-5, evaluation of options will not obligate the Government to exercise the option(s).

(b) Technical Factors:

Provide one (1) original, four (4) copies, and one (1) electronic copy (CD) of the solicitation submittal requirements for Factors 1-3 identified below. Entire proposal shall not exceed 150 pages in length (single-sided), utilizing a minimum Arial Font of 11 with pages numbered.

Factor 1 – Technical/Management Approach

(i) Solicitation Submittal Requirements:

The composition and management of the Offerors proposed teaming arrangement(s) for this contract will be evaluated in this factor.

The Offeror shall submit the following information:

(1) Provide a narrative describing the Offeror’s contractor teaming arrangement(s) proposed for this contract and the rationale for proposing this arrangement. Provide the role, responsibilities, and contractual relationships between the various firms (see FAR Subpart 9.6). The narrative shall clearly describe the type and percentage of work that each firm will perform.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .