WI_1011_-_TROLLEY_STOWAGE_ARMS_MOD_ARCTICROH14R2.pdf

USNS ARCTIC

(T-AOE 8)

UNREP GEAR RFP NO. N32205-14-R-2000

6 January, 2014 ITEM NO. 1011 Category "A" PHDNSWC/KRUG/jb

STATION NO.6 TROLLEY STOWAGE ARMS MODIFICATIONS

1011-1

1.0 ABSTRACT

This item describes the requirements for modifications to the Station No. 6 Trolley Stowage Arms

2.0 REFERENCES

2.1 NAVSEA Drawing No. 8287352, Stowage Arm, Machining

3.0 ITEM LOCATION/DESCRIPTION

3.1 Location/Quantity

3.1.1 Location: Various

3.1.2 Quantity: 2

3.2 Item Description/Manufacturer's Data

3.2.1 Bill of Materials

PC No. QTY Description 1 2 Right and left hand trolley stowage arms. See Reference 2.1.

3.2.2 Quantities are considered estimates. The

Contractor shall provide the exact quantities and additional material such as miscellaneous pipe fittings, elbows, caps, valves, pipe hangers, weld material, cable hangers, cable tags, buswork, etc., which are not included in the List of Materials, in order to install a fully functional system which meets the requirements of this specification.

4.0 GOVERNMENT FURNISHED EQUIPMENT/MATERIAL/SERVICES

4.1 Government Furnished Equipment (GFE): None Additional.

4.2 Government Furnished Material (GFM): None Additional.

1011-2

4.3 Government Furnished Services (GFS)

Port Hueneme representative will provide technical support/guidance during the accomplishment of this work item.

4.4 Government Furnished Information (GFI): None Additional.

5.0 NOTES

5.1 The contractor and all subcontractors, regardless of

tier must consult the General Technical Requirements (GTR) to determine applicability to this work item. In performance of this work item, the contractor and all subcontractors regardless of tier must comply with the requirements of all applicable GTR’s including but not limited to GTR’s 1-7, 22, 23, 24, 28 and 29.

5.2 The contractor and all subcontractors, regardless of

tier, are advised to review other work items under this contract to determine their effect on the work required under this work item.

5.3 Contractor Furnished Materials (CFM)

Contractor is to supply Anti-seize compound (MIL-PRF- 907), Grease (MIL-PRF-24139A), and other consumables as required.

5.4 All equipment identified for removal and re-installation

shall be tagged, segregated and preserved to ensure equipment availability upon request of installing activity

6.0 QUALITY ASSURANCE REQUIREMENTS: None Additional.

7.0 STATEMENT OF WORK REQUIRED

7.1 Arrangements/Outfitting: None Additional.

7.2 Structural: None Additional.

7.3 Mechanical/Fluids

1011-3

7.3.1 Fabrication

Fabricate right and left hand trolley stowage arms in accordance with Reference 2.1.

7.3.2 Removals

Remove existing trolley stowage arms on Station No. 6 Heavy Unrep Transfer Head.

7.3.3 Installations

Install fabricated trolley stowage arms on Station No. 6 Heavy Unrep Transfer Head.

7.4 Electrical: None Additional.

7.5 Electronics: None Additional.

7.6 Preparation of Drawings/Documentation/Test Memo: None

Additional.

7.7 Inspection/Test

7.7.1 Operational test

a. Trolley arms will be tested by swinging open and closed to ensure freedom of movement.

b. During system operation, trolley should seat properly in the trolley stowage arms. Proper seating can be verified by Port Hueneme and/or ship personnel.

7.8 Painting

Paint all new and modified surfaces to match surrounding surfaces.

1011-4

7.9 Marking

Install name plates, notices, and markings for all new and modified systems (or areas).

7.10 Manufacturer's Representative

Government representatives from NSWC will be on site to provide technical oversight and guidance upon request from contractor

8.0 GENERAL REQUIREMENTS: None Additional.