N00024-17-R-2462_Amendment_0010.docx

N00024-17-R-2462

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

The following items are applicable to this modification:

REVISED SUMMARY OF CHANGES

The purposes of this amendment to solicitation N00024-17-R-2462 are to:

a) Respond to questions submitted by potential Offerors;

b) Revise SECTION L - INSTRUCTIONS CONDITIONS AND NOTICE TO BIDDERS, and;

c) Revise SECTION J - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS.

1. The following questions were submitted by potential Offerors. The Government’s response follows each question. Questions and Answers 060 through 063 are provided in this Amendment 0010. Questions and Answers 001 through 059 were provided in previous amendments.

Question 060: Will the Government provide a Non-Employee Proposal Preparation Certification template as required by Section L.3.4.3?

Answer 060: No. The Government will not provide a Non-Employee Proposal Preparation Certificate template. The Offeror is permitted to use its own format so long as it meets the requirements of L.3.4.3.

Question 061: Please clarify that only one signature by an authorized official of the Offeror is required on the Proposal Preparation Certification.

Answer 061: Yes. Only one signature by an authorized official is required of the Offeror. As stated in Section L.3.4.3 "a certificate to this effect shall be furnished which must be signed by an authorized official of the Offeror."

Question 062: Under Section L.3.2.1, will the Government consider removing Appendix F, Facility Certifications, from the page limit associated with Volume I Technical Proposal?

Answer 062: Yes. Any Facility Certifications required by L.3.5.1.2.7 shall be submitted as Appendix F and shall not be included in the page count of the Offeror's Volume I Technical Proposal. Sections L.3.2.1 will be revised to incorporate changes to the solicitation as a result of this answer.

Question 063: Can the Government provide clarification on which Facility Certification certificates are required to be submitted in Appendix F, Facility Certifications?

Answer 063: As stated in L.3.5.1.2.7 "The Offeror shall state whether the facilities are certified as required by this solicitation." It is up to the Offeror to determine which certifications are relevant to the LCU 1700 solicitation.

2. As a result of the questions and answers above, the subject solicitation is hereby amended as follows:

SECTION L - INSTRUCTIONS CONDITIONS AND NOTICE TO BIDDERS

Paragraph L.3.2.1 is hereby deleted in its entirety and replaced with the following:

“L.3.2.1 The solicitation response shall be contained in two (2) separate volumes as follows:

For each volume, the number of copies and page limitations are shown below:

(including all Appendices) 1/6 (including all Appendices) 2 (including all Appendices)

* L.3.5.1.1.1.j only of Appendix A, Appendix C, Appendix F, Appendix L, and Appendix M shall not be included in the page count of the Offeror’s Technical Proposal.”

3. As stated in Amendment 0008, the Government has reviewed and prepared revisions to structural drawings. These revisions were not limited solely to clarifications of J-1A, Specifications for Building Landing Craft, Utility 1700, Figure 1, Design Head and Minimum Plate Thickness, but included a materials change in Section 078, various clarifications in Section 100, and necessary bow ramp design information in Section 169. The following specification sections and structural drawings were updated:

i. Attachment J-1A, Specification 078, Table 4 Material Specification, as stated in the basic solicitation, is hereby revised as shown in Attachment “A” to this amendment and is provided via the IDE.

ii. Attachment J-1A, Specification Section 100, Structure, as stated in the basic solicitation, is hereby replaced as shown in Attachment “B” to this amendment and is provided via the IDE. Change pages within Section 100 have been updated with a 28 April 2017 date. Pages that have not been updated maintain the original date as stated in the basic solicitation. Specification Section 169 includes the bow ramp design information.

iii. Attachment J-1A, Specification Section 169, Bow Ramp and Stern Gate, as stated in the basic solicitation, is hereby replaced as shown in Attachment “C” to this amendment and is provided via the IDE. Change pages within Section 169 have been updated with a 28 April 2017 date. Pages that have not been updated maintain the original date as stated in the basic solicitation.

iv. Attachment J-1B, LCU 1700 Preliminary Design Contract Drawings and Data is hereby modified in accordance with Attachments “D”, “E”, “F”, “G”, “H” and “I” to this amendment and are provided via the IDE.

4. As a result of the above, SECTION J - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS, is hereby deleted in its entirety and revised to read as follows:

“Attachment J-1: Landing Craft, Utility (LCU) 1700 Class Technical Data Package

J-1A: Specifications for Building Landing Craft, Utility 1700, dated 09 December 2016, updated through 28 April 2017 J-1B: LCU 1700 Preliminary Design Contract Drawings and Data, dated 14 November 2016, updated through 28 April 2017 J-1C: LCU 1700 Class Commercial Off The Shelf Items List, dated 22 March 2017, updated through 19 April 2017 J-1D: LCU 1700 Performance Verification Matrix, dated 09 December 2016 J-1E: List of Reference Identifications, dated 22 February 2017, updated through 13 March 2017

Attachment J-2: Contract Data Requirements Lists (CDRL), DD Form 1423

J-2A: LCU 1700 Class Contract Data Requirements List (CDRL) Instruction, dated 09 December 2016 J-2B: Exhibit A Index, dated 27 February 2017 J-2C: Exhibit A: Program, dated 27 February 2017 J-2D: Exhibit B Index, dated 27 February 2017, updated through 20 April 2017 J-2E: Exhibit B: Technical, dated 27 February 2017, updated through 20 April 2017 J-2F: Exhibit C Index, dated 27 February 2017 J-2G: Exhibit C: Product Support Program, dated 27 February 2017

Attachment J-3: LCU 1700 Class Command, Control, Communications, Computers, and Navigation (C4N) Turnkey Approach, dated 22 March 2017

Attachment J-4: LCU 1700 Class Government Furnished Equipment, dated 12 December 2016

Attachment J-5: LCU 1700 Class Government Furnished Information Schedule C, dated 22 March 2017

Attachment J-6: Weight Control Plan (To be submitted with the proposal and to be attached at award)

Attachment J-7: Systems Engineering Management Plan (To be submitted with the proposal and to be attached at award)

Attachment J-8: Quality Assurance Plan (To be submitted with the proposal and to be attached at award)

Attachment J-9: Product Support Plan (To be submitted with the proposal and to be attached at award)

Attachment J-10: Integrated Master Schedule (To be submitted with the proposal and to be attached at award)

Attachment J-11: LCU 1700 Class Program Protection Instruction, dated 09 December 2016

Attachment J-12: Technical Manual Contract Requirements (TMCR)

J-12A: Commercial Off-the-Shelf Technical Manual for LCU 1700 Equipment.

TMCR NO. SNIPP-160014-000, dated 20 October 2015 J-12B: Hull, Mechanical, and Electrical (HM&E) Equipment Technical Manual for HM&E Equipment reflecting organizational, intermediate, and depot-level maintenance.

TMCR NO. SNIPP-160006-000, dated 19 October 2015 J-12C: HM&E Technical Manual for HM&E System reflecting organizational, intermediate, and depot level maintenance. TMCR NO. SNIPP-160009-000, dated 19 October 2015 J-12D: HM&E Equipment Technical Repair Standard (TRS) for HM&E.

TMCR NO. SNIPP-160012-000. Dated 20 October 2015 J-12E: Electronic Equipment Technical Manual for Electronic and Interior Communication Equipment reflecting organizational, intermediate, and depot level maintenance.

TMCR NO. SNIPP-160008-000, dated 19 October 2015 J-12F: Electronic System Technical Manual for Electronic and Interior Communication Systems reflecting organizational, intermediate, and depot level maintenance.

TMCR NO. SNIPP-160010-000, dated 19 October 2015 J-12G: Electronic Equipment TRS for Electronic Equipment and Interior Communication.

TMCR NO. SNIPP-160013-000, dated 20 October 2015 J-12H: Non-superseding Revision to LCU 1700 Equipment.

TMCR NO. SNIPP-160015-000, dated 20 October 2015 J-12I: Craft Information Book (CIB) for LCU 1700 Class.

TMCR NO. SNIPP-160007-000, dated 19 October 2015

Attachment J-13: LCU 1700 Class Logistics Product Data (LPD) Data Selection Requirements, dated 09 December 2016

Attachment J-14: LCU 1700 Class Diminishing Manufacturing Sources and Material Shortages (DMSMS) Plan, dated July 2016

Attachment J-15: LCU 1700 Class IUID Implementation Plan, dated 08 August 2016

Attachment J-16: LCU 1700 Class Hazardous Material Management Plan, dated 31 October 2016

J-16A: NAVSEA HAZMAT Avoidance Process, dated September 2015

Attachment J-17: LCU 1700 Class System Safety Program Plan, dated 30 October 2016

Attachment J-18: LCU 1700 Class Maintenance Concept, dated 09 December 2016

Attachment J-19: Identification and Assertion of Restrictions on the Government’s Use, Release, or Disclosure of Technical Data:

J-19A: Technical Data Matrix (To be submitted with the proposal and to be attached at award) J-19B: Defense Federal Acquisition Regulation Supplement (DFARS) 252.227-7017 list. (Note: This list will be referred to as the 7017 List in this document.) (To be submitted with the proposal and to be attached at award)

Attachment J-20: Craft Quantity Step Ladder Pricing Exhibits (OPTION ITEM 0002 and 0004 through 0011) (To be submitted with the proposal and to be attached at award)

Attachment J-21: Table B.1: Steel Commodity Adjustment for OPTION ITEMS 0007, 0008, 0009, 0010, and 0011(To be submitted with the proposal and to be attached at award)

Attachment J-22: Table C.1: OPTION ITEM 0023 Technical Data Package List

Attachment J-23: Table F.1: Proposed Delivery Schedule (To be submitted with the proposal and to be attached at award)”

5. Receipt of Proposals is not extended as a result of this amendment.

6. Except as provided herein, all other terms and conditions of solicitation N00024-17-R-2462 remain unchanged.

image1.wmf