N00024-17-R-2462_Amendment_0009.docx

N00024-17-R-2462

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

The following items are applicable to this modification:

REVISED SUMMARY OF CHANGES

The purposes of this amendment to solicitation N00024-17-R-2462 are to:

a) Respond to questions submitted by potential Offerors;

b) Revise SECTION H - SPECIAL CONTRACT REQUIREMENTS, and;

c) Revise SECTION J - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS.

1. The following questions were submitted by potential Offerors. The Government’s response follows each question. Questions and Answers 058 through 059 are provided in this Amendment 0008. Questions and Answers 001 through 057 were provided in previous amendments.

Question 058: Our propulsion system vendor recommends a similar propeller and nozzle type to that which is required by the Specification in Section 245c. Please clarify this requirement.

Answer 058: Yes. The propeller and nozzle type were provided in the Specification for illustrative purposes only. Similar propellers may be used but shall meet all of the performance requirements for LCU 1700. Attachment "A" to this amendment, change pages to Attachment J-1A, Section 245c, General, will be provided via the Integrated Digital Environment (IDE) to clarify the requirement.

Question 059: Freeman Marine no longer manufactures the Pilothouse Windows that are required by the Specification. Please advise which Pilothouse Windows should be used.

Answer 059: Attachment "B" to this amendment, change pages to Attachment J-1A, Section 625, Pilothouse Windows, will be provided via the Integrated Digital Environment (IDE) to update the Pilothouse Windows to the Series 5140 CRES weld-in windows. As a result, an updated Attachment J-1C, LCU 1700 Class Commercial Off The Shelf Items List, will be provided as Attachment “C” to this amendment via the IDE.

2. SECTION H- SPECIAL CONTRACT REQUIREMENTS, first table, is hereby revised to read as follows:

a. Delete: “H1 5252.202 9101 ADDITIONAL DEFINITIONS (FT) - ALTERNATE II (MAY 1993)(MODIFIED)(XXX 2017)”

Add: “H1 5252.202-9101 ADDITIONAL DEFINITIONS (MAY 1993)”

b. Clause H1 5252.202 9101 ADDITIONAL DEFINITIONS (FT) - ALTERNATE II (MAY 1993)(MODIFIED)(XXX 2017) is hereby deleted in its entirety and revised to read as follows:

“5252.202-9101 ADDITIONAL DEFINITIONS (MAY 1993)

As used throughout this contract, the following terms shall have the meanings set forth below:

(a) DEPARTMENT - means the Department of the Navy.

(b) REFERENCES TO THE FEDERAL ACQUISITION REGULATION (FAR) - All references to the FAR in this contract shall be deemed to also reference the appropriate sections of the Defense FAR Supplement (DFARS), unless clearly indicated otherwise.

(c) REFERENCES TO ARMED SERVICES PROCUREMENT REGULATION OR DEFENSE ACQUISITION REGULATION - All references in this document to either the Armed Services Procurement Regulation (ASPR) or the Defense Acquisition Regulation (DAR) shall be deemed to be references to the appropriate sections of the

FAR/DFARS.

(d) COMMANDER, NAVAL SEA SYSTEMS COMMAND means the Commander of the Naval Sea Systems Command of the Department of the Navy or his duly appointed successor or duly authorized representative.

(e) SUPERVISOR means the cognizant Supervisor of Shipbuilding, Conversion and Repair, Department of the Navy.

(f) PROJECT MANAGER (SHAPM)(PMS) means the (List appropriate PM) Program Manager, or his duly appointed successor or duly authorized representative, of the Naval Sea Systems Command of the Department of the Navy.

(g) LEAD SHIP OR FIRST SHIP OF THE CLASS means LCU 1700.

(h) FOLLOW SHIP means any ship of the LCU 1700 Class other than the first ship.

(i) ADJUSTMENT IN CONTRACT PRICE means adjustment in target cost, target profit, target price and ceiling price or fixed price, as appropriate under the circumstances and except as otherwise provided in the contract.

(j) NATIONAL STOCK NUMBERS Whenever the term Federal Item Identification Number and its acronym FIIN or the term Federal Stock Number and its acronym FSN appear in the contract, order or their cited specifications and standards, the terms and acronyms shall be interpreted as National Item Identification Number (NIIN) and National Stock Number (NSN) respectively which shall be defined as follows:

1. National Item Identification Number (NIIN). The number assigned to each approved Item Identification under the Federal Cataloging Program. It consists of nine numeric characters, the first two of which are the National Codification Bureau (NCB) Code. The remaining positions consist of a seven digit non significant number.

2. National Stock Number (NSN). The National Stock Number (NSN) for an item of supply consists of the applicable four position Federal Supply Class (FSC) plus the applicable nine position National Item Identification Number (NIIN) assigned to the item of supply.

(k) NAVY REORGANIZATION Pursuant to the reorganization within the Department of the Navy, effective 1 July 1974, the Naval Sea Systems Command has become the successor to the Naval Ship Systems Command and the Naval Ordnance Systems Command. The Naval Ship Systems Command was the successor to the Bureau of Ships. The Naval Ordnance Systems Command and the Naval Air Systems Command were the successors to the Bureau of Naval Weapons, which was the successor to the Bureau of Ordnance and the Bureau of Aeronautics. Accordingly, as appropriate in view of the foregoing, reference in the contract and in the documents referenced therein to the Naval Ship Systems Command, the Bureau of Ships, the Naval Ordnance Systems Command, the Naval Air Systems Command, the Bureau of Naval Weapons, the Bureau of Ordnance or the Bureau of Aeronautics shall be deemed to refer to the Naval Sea Systems Command.”

3. As a result of the questions and answers above, SECTION J - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS, is hereby deleted in its entirety and revised to read as follows:

“Attachment J-1: Landing Craft, Utility (LCU) 1700 Class Technical Data Package

J-1A: Specifications for Building Landing Craft, Utility 1700, dated 09 December 2016, updated through 17 April 2017 J-1B: LCU 1700 Preliminary Design Contract Drawings and Data, dated 14 November 2016, updated through 17 April 2017 J-1C: LCU 1700 Class Commercial Off The Shelf Items List, dated 22 March 2017, updated through 19 April 2017 J-1D: LCU 1700 Performance Verification Matrix, dated 09 December 2016 J-1E: List of Reference Identifications, dated 22 February 2017, updated through 13 March 2017

Attachment J-2: Contract Data Requirements Lists (CDRL), DD Form 1423

J-2A: LCU 1700 Class Contract Data Requirements List (CDRL) Instruction, dated 09 December 2016 J-2B: Exhibit A Index, dated 27 February 2017 J-2C: Exhibit A: Program, dated 27 February 2017 J-2D: Exhibit B Index, dated 27 February 2017, updated through 20 April 2017 J-2E: Exhibit B: Technical, dated 27 February 2017, updated through 20 April 2017 J-2F: Exhibit C Index, dated 27 February 2017 J-2G: Exhibit C: Product Support Program, dated 27 February 2017

Attachment J-3: LCU 1700 Class Command, Control, Communications, Computers, and Navigation (C4N) Turnkey Approach, dated 22 March 2017

Attachment J-4: LCU 1700 Class Government Furnished Equipment, dated 12 December 2016

Attachment J-5: LCU 1700 Class Government Furnished Information Schedule C, dated 22 March 2017

Attachment J-6: Weight Control Plan (To be submitted with the proposal and to be attached at award)

Attachment J-7: Systems Engineering Management Plan (To be submitted with the proposal and to be attached at award)

Attachment J-8: Quality Assurance Plan (To be submitted with the proposal and to be attached at award)

Attachment J-9: Product Support Plan (To be submitted with the proposal and to be attached at award)

Attachment J-10: Integrated Master Schedule (To be submitted with the proposal and to be attached at award)

Attachment J-11: LCU 1700 Class Program Protection Instruction, dated 09 December 2016

Attachment J-12: Technical Manual Contract Requirements (TMCR)

J-12A: Commercial Off-the-Shelf Technical Manual for LCU 1700 Equipment.

TMCR NO. SNIPP-160014-000, dated 20 October 2015 J-12B: Hull, Mechanical, and Electrical (HM&E) Equipment Technical Manual for HM&E Equipment reflecting organizational, intermediate, and depot-level maintenance.

TMCR NO. SNIPP-160006-000, dated 19 October 2015 J-12C: HM&E Technical Manual for HM&E System reflecting organizational, intermediate, and depot level maintenance. TMCR NO. SNIPP-160009-000, dated 19 October 2015 J-12D: HM&E Equipment Technical Repair Standard (TRS) for HM&E.

TMCR NO. SNIPP-160012-000. Dated 20 October 2015 J-12E: Electronic Equipment Technical Manual for Electronic and Interior Communication Equipment reflecting organizational, intermediate, and depot level maintenance.

TMCR NO. SNIPP-160008-000, dated 19 October 2015 J-12F: Electronic System Technical Manual for Electronic and Interior Communication Systems reflecting organizational, intermediate, and depot level maintenance.

TMCR NO. SNIPP-160010-000, dated 19 October 2015 J-12G: Electronic Equipment TRS for Electronic Equipment and Interior Communication.

TMCR NO. SNIPP-160013-000, dated 20 October 2015 J-12H: Non-superseding Revision to LCU 1700 Equipment.

TMCR NO. SNIPP-160015-000, dated 20 October 2015 J-12I: Craft Information Book (CIB) for LCU 1700 Class.

TMCR NO. SNIPP-160007-000, dated 19 October 2015

Attachment J-13: LCU 1700 Class Logistics Product Data (LPD) Data Selection Requirements, dated 09 December 2016

Attachment J-14: LCU 1700 Class Diminishing Manufacturing Sources and Material Shortages (DMSMS) Plan, dated July 2016

Attachment J-15: LCU 1700 Class IUID Implementation Plan, dated 08 August 2016

Attachment J-16: LCU 1700 Class Hazardous Material Management Plan, dated 31 October 2016

J-16A: NAVSEA HAZMAT Avoidance Process, dated September 2015

Attachment J-17: LCU 1700 Class System Safety Program Plan, dated 30 October 2016

Attachment J-18: LCU 1700 Class Maintenance Concept, dated 09 December 2016

Attachment J-19: Identification and Assertion of Restrictions on the Government’s Use, Release, or Disclosure of Technical Data:

J-19A: Technical Data Matrix (To be submitted with the proposal and to be attached at award) J-19B: Defense Federal Acquisition Regulation Supplement (DFARS) 252.227-7017 list. (Note: This list will be referred to as the 7017 List in this document.) (To be submitted with the proposal and to be attached at award)

Attachment J-20: Craft Quantity Step Ladder Pricing Exhibits (OPTION ITEM 0002 and 0004 through 0011) (To be submitted with the proposal and to be attached at award)

Attachment J-21: Table B.1: Steel Commodity Adjustment for OPTION ITEMS 0007, 0008, 0009, 0010, and 0011(To be submitted with the proposal and to be attached at award)

Attachment J-22: Table C.1: OPTION ITEM 0023 Technical Data Package List

Attachment J-23: Table F.1: Proposed Delivery Schedule (To be submitted with the proposal and to be attached at award)”

i. Attachment J-1A, Specifications for Building Landing Craft, Utility 1700, is hereby modified in accordance with Attachments “A” and “B” to this amendment and are provided via the IDE.

ii. Attachment J-1C, LCU 1700 Class Commercial Off The Shelf Items List, is hereby modified in accordance with Attachment “C” to this amendment and is provided via the IDE.

4. Receipt of Proposals is not extended as a result of this amendment.

5. Except as provided herein, all other terms and conditions of solicitation N00024-17-R-2462 remain unchanged.

image1.wmf