N00024-17-R-2462_Amendment_0002.docx

N00024-17-R-2462

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

The following items are applicable to this modification:

REVISED SUMMARY OF CHANGES

The purpose of this amendment to solicitation N00024-17-R-2462 is to:

a) Respond to questions submitted by potential Offerors;

b) Revise SECTION J - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS,

c) Extend the proposal receipt date.

1. The following questions were submitted by potential Offerors. The Government’s response follows each question. Questions and Answers 017 through 021 are provided in this Amendment 0002. Questions and Answers 001 through 016 were provided in Amendment 0001.

Question 017: Section L.3.5.2. lists specific page numbering for each item that should come before Chapter 1. This appears to limit each topic to one page. Will the Government allow an Offeror to combine topics, so long as the order/sequence of these items remains as specified in the RFP?

Answer 017: The requirements in Section L.3.5.2 were not intended to restrict each topic to one page. The Offeror may deviate from the order of the topics identified in RFP Section L.3.5.2 as long as it facilitates a logical flow of information. However, the Offeror shall utilize lowercase roman numeral page numbering as specified in the RFP. Additionally, all seven topics listed in L.3.5.2 shall be included in this section.

Question 018: If a prime Offeror has a Department of State Technical Assistance Agreement with a foreign company, is the foreign company authorized to receive RFP documents marked with the Distribution Statement D?

Answer 018: No. All distribution statements for RFP documents should be followed. Distribution Statement D restricts distribution to Department of Defense (DoD) and U.S. DoD contractors only. Any Non-U.S. DoD Contractors who wishes to receive RFP documents marked as Distribution Statement D must submit a separate request, through the prime contractor, to PEO Ships, PMS 377. The request must include all pertinent documentation/substantiation in support of its request.

Question 019: What level of detail is required for the Contractor Work Breakdown Structure (CWBS)?

Answer 019: The Offeror shall develop a CWBS and CWBS Dictionary that defines the work encompassed in each CWBS element down to the cost account level and then successively extend it to lower levels of detail, as necessary, to manage the program and to define work packages and bills. It is up to the Offeror to determine what level of work breakdown is sufficient to accomplish this requirement.

Question 020: Section L.3.5.1.3.2 calls for identification of management resources required under Factor 3 - Management, similar to the requirement in L.3.5.1.2.10 for identification of labor (by trade) required for production, and in L.3.5.1.1.4 for design and engineering resources required for craft design. Please clarify whether the response to L.3.5.1.3.2 is to focus on management resources only, or if this is intended to provide a broader view of total project resources for all labor categories.

Answer 020: Under Factor 1, the Offeror shall identify the design and engineering resources required to support the design and engineering requirements of this solicitation. Under Factor 2, the Offeror shall identify production resources required to support the production requirements of this solicitation. Under Factor 3, the Offeror shall identify the management resources required to support the management requirements of this solicitation. Whether certain activities, such as first level supervision or quality assurance, are applicable to Factor 1 or 2 or 3 is dependent upon each Offeror's unique organizational structure. It is expected that the resources specified under each of the three factors will result in the sum of the resources (prime and subcontractor) needed to accomplish the total effort described.

Question 021: Are the National Stock Numbers (NSNs) for the mattresses shown in Specification sections 640b and 640c correct?

Answer 021: No, the mattress NSNs contained typographical errors. Attachment "A" to this amendment, change pages to Attachment J-1A, Section 640b, Craftmaster's Stateroom and Section 640c, Crew Berthing Space, and Attachment "B" to this amendment, change pages to Attachment J-1E, List of Reference Identifications, NSNs, are provided via the IDE and correct the errors.

2. As a result of the above, SECTION J - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS, is hereby deleted in its entirety and revised to read as follows:

“Attachment J-1: Landing Craft, Utility (LCU) 1700 Class Technical Data Package

J-1A: Specifications for Building Landing Craft, Utility 1700, dated 09 December 2016, updated through 13 March 2017 J-1B: LCU 1700 Preliminary Design Contract Drawings and Data, dated 14 November 2016 J-1C: LCU 1700 Class Commercial Off The Shelf Items List, dated 09 December 2016 J-1D: LCU 1700 Performance Verification Matrix, dated 09 December 2016 J-1E: List of Reference Identifications, dated 22 February 2017, updated through 13 March 2017

Attachment J-2: Contract Data Requirements Lists (CDRL), DD Form 1423

J-2A: LCU 1700 Class Contract Data Requirements List (CDRL) Instruction, dated 09 December 2016 J-2B: Exhibit A Index, dated 27 February 2017 J-2C: Exhibit A: Program, dated 27 February 2017 J-2D: Exhibit B Index, dated 27 February 2017, updated through 6 March 2017 J-2E: Exhibit B: Technical, dated 27 February 2017, updated through 6 March 2017 J-2F: Exhibit C Index, dated 27 February 2017 J-2G: Exhibit C: Product Support Program, dated 27 February 2017

Attachment J-3: LCU 1700 Class Command, Control, Communications, Computers, and Navigation (C4N) Turnkey Approach, dated 09 December 2016

Attachment J-4: LCU 1700 Class Government Furnished Equipment, dated 12 December 2016

Attachment J-5: LCU 1700 Class Government Furnished Information Schedule C, dated 09 December 2016

Attachment J-6: Weight Control Plan (To be submitted with the proposal and to be attached at award)

Attachment J-7: Systems Engineering Management Plan (To be submitted with the proposal and to be attached at award)

Attachment J-8: Quality Assurance Plan (To be submitted with the proposal and to be attached at award)

Attachment J-9: Product Support Plan (To be submitted with the proposal and to be attached at award)

Attachment J-10: Integrated Master Schedule (To be submitted with the proposal and to be attached at award)

Attachment J-11: LCU 1700 Class Program Protection Instruction, dated 09 December 2016

Attachment J-12: Technical Manual Contract Requirements (TMCR)

J-12A: Commercial Off-the-Shelf Technical Manual for LCU 1700 Equipment.

TMCR NO. SNIPP-160014-000, dated 20 October 2015 J-12B: Hull, Mechanical, and Electrical (HM&E) Equipment Technical Manual for HM&E Equipment reflecting organizational, intermediate, and depot-level maintenance.

TMCR NO. SNIPP-160006-000, dated 19 October 2015 J-12C: HM&E Technical Manual for HM&E System reflecting organizational, intermediate, and depot level maintenance. TMCR NO. SNIPP-160009-000, dated 19 October 2015 J-12D: HM&E Equipment Technical Repair Standard (TRS) for HM&E.

TMCR NO. SNIPP-160012-000. Dated 20 October 2015 J-12E: Electronic Equipment Technical Manual for Electronic and Interior Communication Equipment reflecting organizational, intermediate, and depot level maintenance.

TMCR NO. SNIPP-160008-000, dated 19 October 2015 J-12F: Electronic System Technical Manual for Electronic and Interior Communication Systems reflecting organizational, intermediate, and depot level maintenance.

TMCR NO. SNIPP-160010-000, dated 19 October 2015 J-12G: Electronic Equipment TRS for Electronic Equipment and Interior Communication.

TMCR NO. SNIPP-160013-000, dated 20 October 2015 J-12H: Non-superseding Revision to LCU 1700 Equipment.

TMCR NO. SNIPP-160015-000, dated 20 October 2015 J-12I: Craft Information Book (CIB) for LCU 1700 Class.

TMCR NO. SNIPP-160007-000, dated 19 October 2015

Attachment J-13: LCU 1700 Class Logistics Product Data (LPD) Data Selection Requirements, dated 09 December 2016

Attachment J-14: LCU 1700 Class Diminishing Manufacturing Sources and Material Shortages (DMSMS) Plan, dated July 2016

Attachment J-15: LCU 1700 Class IUID Implementation Plan, dated 08 August 2016

Attachment J-16: LCU 1700 Class Hazardous Material Management Plan, dated 31 October 2016

J-16A: NAVSEA HAZMAT Avoidance Process, dated September 2015

Attachment J-17: LCU 1700 Class System Safety Program Plan, dated 30 October 2016

Attachment J-18: LCU 1700 Class Maintenance Concept, dated 09 December 2016

Attachment J-19: Identification and Assertion of Restrictions on the Government’s Use, Release, or Disclosure of Technical Data:

J-19A: Technical Data Matrix (To be submitted with the proposal and to be attached at award) J-19B: Defense Federal Acquisition Regulation Supplement (DFARS) 252.227-7017 list. (Note: This list will be referred to as the 7017 List in this document.) (To be submitted with the proposal and to be attached at award)

Attachment J-20: Craft Quantity Step Ladder Pricing Exhibits (OPTION ITEM 0002 and 0004 through 0011) (To be submitted with the proposal and to be attached at award)

Attachment J-21: Table B.1: Steel Commodity Adjustment for OPTION ITEMS 0007, 0008, 0009, 0010, and 0011(To be submitted with the proposal and to be attached at award)

Attachment J-22: Table C.1: OPTION ITEM 0023 Technical Data Package List

Attachment J-23: Table F.1: Proposed Delivery Schedule (To be submitted with the proposal and to be attached at award)”

3. Receipt of Proposals is hereby extended until 02:00 PM local time 08 May 2017.

4. Except as provided herein, all other terms and conditions of solicitation N00024-17-R-2462 remain unchanged.

image1.wmf