Att 2 - WBL Spec Response Matrix.xlsx

XLSX spreadsheet 20 KB Posted

Attached to
Workboat Large
Solicitation number
N00024-17-R-2217
Issued by

About this file

Attachment 2

View the file

Other files

File Type Posted
N00024-17-R-2217_Amendment_06.pdf PDF
N00024-17-R-2217-0005.pdf PDF
Att_1_-_WBL_Specification_Rev_C_20June2017.pdf PDF
Att_4_-_WBL_Delivery_Schedule_Rev1.xls XLS spreadsheet
N00024-17-R-2217-0004.pdf PDF
Att_1_-_WBL_Specification_Rev_C_20June2017.pdf PDF
N00024-17-R-2217_Amend_0003.pdf PDF
Att_1_-_WBL_Specification_Rev_B_07June2017.pdf PDF
N00024-17-R-2217_Amendment_0002.pdf PDF
Att_9_-_CLIN_Pricing_Chart_(Rev_06.12.17).xlsx XLSX spreadsheet
N00024-17-R-2217 Conformed RFP Redline —
Att 9 - CLIN Pricing Chart —
N00024-17-R-2217 Amend 0001.docx DOCX document
N00024-17-R-2217_Workboat_Large.pdf PDF
Att 6 - ID of Noncommercial Data.doc DOC document
Att 3 - WBL Vendor Provided Spare Parts List.xlsx XLSX spreadsheet
Att 1 - WBL Specification.pdf PDF
Att 4 - WBL Delivery Schedule.xls XLS spreadsheet
Att 9 - CLIN Pricing Chart.xlsx XLSX spreadsheet
Att 8 - Unique Item Identification.doc DOC document
Att 10 - Past Performance Questionnaire.doc DOC document
Att 11 - WBL Sketch.pdf PDF
Att 7 - ID of Commercial Data Rights.doc DOC document
Att 5 - Past Performance Information.doc DOC document
Q&A_3_(05.11.17).pdf PDF
Att_11_WB_Large_Sketch.pdf PDF
Q&A_2_(05.08.17)_Rev.pdf PDF
Q&A_2_(05.08.17).pdf PDF
N0002417R2217_-_WBL_-_Q&A_1_(05.01.17).pdf PDF
DRAFT_Workboat_Large_Specification.pdf PDF
Show all 30

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Att 2 Spec Response Matrix

ATTACHMENT 2
CNIC WORK BOAT LARGE
SPECIFICATION RESPONSE MATRIX

NOTES & INSTRUCTIONS:

Offerors to submit Attachment 2 with response for parameters identified in the Specification (See Section J).

1. Where specific parameters or other technical information are required in the Specification (indicated by red text in the Specification), Offerors shall fill in the specific parameters/information for their proposed design for each boat configuration (as applicable) in this attachment and include supporting data in Vol I as directed. At bottom Offerors shall respond with 'Comply' to indicate their design meets all Specification requirements; or 'Comply w/Exceptions' to indicate disagreement with any specific section of the Specification.

2. A response of 'Comply w/Exceptions' shall be accompanied by amplifying notes in the 'Offeror's Notes' section at bottom, providing rationale for any exceptions. Each exception shall list the Specification section, the specific rationale for non-compliance with the section, and a proposed alternative approach. Any proposed alternative approach must meet the minimum requirement of the Specification to the Government's satisfaction. Description of Offeror's alternative approach shall include the detailed approach to achieving the minimum Specification requirement; applicable material specifications, make and model numbers for all parts/components; compliance with any requisite commercial or military standard, or associated “best practice”; and shall include any supporting product performance, test data, or other empirical evidence for the proposed product or service capability where applicable. The Government reserves the right to reject (without discussion) any proposed alternative which is incomplete or fails to meet minimum requirements of the Specification.

3. A response is required for each Specification section identified herein. The Government reserves the right to evaluate incomplete responses as non-compliant with the Specification and unacceptable for Factor 1 (Technical Approach).

Specification Item Specification Parameter Offeror Response (See Note 1) 070-1 Enter Length Overall (LOA): xx.xx feet (ft) [Maximum of 41 feet]

070-1Enter Hull Length (Lhull): xx.xx ft
070-1Enter Beam Overall (BOA): xx.x ft

[Maximum of 17 ft]

070-1Enter Beam at waterline: xx.x ft
070-1Enter Height, Keel to Fixed Structure: xx.x ft
070-1Enter Height, Keel to Moveable Structure: xx.x ft
070-1Enter Height, Waterline to Fixed Structure or Equipment: xx.x ft

[Maximum of 13 ft] 070-1 Enter Total Installed Fuel Capacity: xxx gallons [Minimum of 1200 gallons]

070-1Enter Full Load Weight (as defined in Section 070-3): xx,xxx lbs incl x% margin
070-1Enter Longitudinal Center of Gravity (LCG) in Full Load: xx.x ft forward of transom/keel intersect
070-1Enter Vertical Center of Gravity (VCG) in Full Load:

xx.x ft above reference baseline 070-1 Enter Full Load Draft to lowest extremity: x.x ft at Full Load [Maximum of 7 feet, (objective of 6 feet)]

070-1Enter Full Load Draft to center of propulsor: x.x ft
070-1Enter Full Load Freeboard (Forward): x.x ft
070-1Enter Full Load Freeboard (Aft): x.x ft

[Maximum of 48 inches] 070-1 Enter Transom Swim Platform Freeboard: x.x ft [Maximum of 18 inches] 070-1 Enter Bollard Thrust: x.x ft [Minimum of 22,000 lbs] 070-1 Enter Maximum Speed (at x,xxx engine RPM): xx knots (kts) at Full Load in calm water [Minimum of 9 kts] 070-1 Enter Height when Rigged for Transport: x.x ft [Maximum of 11 feet]

070-9Enter list of submitted drawings describing the proposed boat.
083-1Initial Spares List - Verify Attachment 3 submitted in Vol II for each configuration.
100General Requirements for Hull Structure - Verify that a description of the Offeror's welding qualification program is included in Vol I.
233-1Inboard Diesel Engines - Verify speed and static bollard pull required in Spec can be achieved on proposed boat using specified engines.
582-4Hydraulic Deck Winches - Provide proposed winch OEM and model.
582-5Hydraulic Deck Capstan - Provide proposed capstan OEM and model.
AllCNIC Work Boat Large Specification - Enter "Comply"; or enter "Comply w/Exceptions" AND provide rationale for exceptions in notes below. If “or equal” equipment is proposed, Offeror shall provide documentation demonstrating compliance with Specification Section 042-3.
Offeror's Notes:

&12RFP N00024-17-R-2217 &10

&P of &N

Example Response

ATTACHMENT 2
CNIC WORK BOAT LARGE
SPECIFICATION RESPONSE MATRIX - EXAMPLE RESPONSE

See below for partial example responses.

Specification Item Specification Parameter Offeror Response (See Note 1)

070-1Enter Length Overall (LOA): xx.xx feet (ft)40.5 ft
070-1Enter Hull Length (Lhull): xx.xx ft39.5 ft
070-1Enter Beam Overall (BOA): xx.x ft16.0 ft
070-1Enter Maximum Speed (at x,xxx engine RPM): xx knots (kts) at Full Load in calm water9.5 kts at 2,100 rpm
070-3Enter list of submitted drawings describing the proposed boat.100-123456 Gen'l Arr

100-123457 Transport (Continue per Sect L)

083-1Initial Spares List - Verify Attachment 2 submitted in Vol II for each configuration.Verified
223-1Inboard Diesel Engines - Verify speeds and static bollard pull required in Spec can be achieved on proposed boat using specified engines.Verified
AllCNIC Work Boat Large Specification - Enter "Comply"; or enter "Comply w/ Exceptions" AND provide rationale for exceptions in notes below.Comply w/ Exceptions
Offeror's Notes:
313-3: Exception: Offeror has no local distributor for Blue Seas voltmeters. Offeror proposes a BrandX Model xxx123 voltmeter in lieu of a Blue Seas voltmeter specified. A catalog sheet for BrandX Model xxx123 is included in Vol I. Offeror has used BrandX voltmeters in 300 boats in similar applications.

RFP N00024-17-R-2216

File details come from the government source that posted it. Updated .