J-1502000-04 TRASH DUMPSTER REPAIR ITEMS (NEW).docx
DOCX document 15 KB Posted
- Attached to
- Landfill Maintenance and Repair Services
- Solicitation number
- N4008525R2529
About this file
This attachment (J-1502000-04) details specific requirements for repairing 8 cubic yard trash dumpsters as part of a Navy Facilities Engineering Command solicitation for landfill maintenance services.
The repair requirements include replacing the metal bottom and 6 inches of sides with 10-gauge A36 steel, installing a 1.5" NPT threaded drain flange, adding five structural channels with doubler plates, installing a new 10-gauge steel lid bridge with hinge brackets, and fitting two 58-inch double wall plastic lids with nickel plated hinge rods. The dumpsters must be restored to "like new" condition, including repairs to side sliding doors and front loader arm sleeves. All surfaces must be thoroughly prepared and painted with brown enamel paint, with all deteriorated coatings removed.
View the file
Other files
Show all 31
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ATTACHMENT J-1502000-04
TRASH DUMPSTER REPAIR ITEMS
8 CY TRASH DUMPSTER REPAIRS ITEMS
SPECIFIC REQUIREMENTS. EACH TRASH DUMPSTER SHALL HAVE THE FOLLOWING REPAIRS MADE.
1. REPLACE METAL BOTTOM AND SIX INCHES UP ON EACH OF THE SIDES WITH 10-GAGE A36 STEEL.
2. INSTALL A 1-1/2” NPT THREADED DRAIN FLANGE.
3. INSTALL FIVE NEW 3-INCH STRUCTURAL CHANNELS 6-INCHES LONG (6”X 6”X .130 THICK), A606-4 CORTEN©, DOUBLER PLATES.
THE DOUBLER PLATES ARE WELDED TO THE BOTTOM OF THE DUMPSTER TO PREVENT THE STRUCTURAL CHANNEL FROM PUSHING
THROUGH THE BOTTOM OF THE DUMPSTER.
4. INSTALL A NEW, 10-GAUGE A36 STEEL LID BRIDGE WITH FIVE LID HINGE BRACKETS.
5. INSTALL TWO NEW 58-INCH DOUBLE WALL PLASTIC LIDS, WITH NICKEL PLATED HINGE RODS.
6. INSURE EACH DUMPSTER IS IN “LIKE NEW” CONDITION. EXAMPLE: SIDE SLIDING DOORS MUST BE IN GOOD WORKING CONDITION, SIDE SLEEVES FOR FRONT LOADER ARMS MUST NOT BE SPLIT OR DAMAGED, PATCHING ANY OTHER HOLES IN DUMPSTER
MUST BE PERFORMED, ETC.
7. ALL DUMPSTER SURFACES (INSIDE AND OUT) SHALL BE SANDED, PREPPED, PRIMED, AND PAINTED WITH “TRASH DUMPSTER” BROWN ENAMEL PAINT. REMOVE ALL BLISTERING, CRACKING, FLAKING, PEELING, OR ANY DETERIORATED COATINGS.
File details come from the government source that posted it. Updated .