J-1502000-04-1 CARDBOARD DUMPSTER REPAIR ITEMS (NEW).docx
DOCX document 16 KB Posted
- Attached to
- Landfill Maintenance and Repair Services
- Solicitation number
- N4008525R2529
About this file
This is a technical specification document (Attachment J-1502000-04-1) detailing repair requirements for 8 cubic yard cardboard dumpsters. The document outlines eight specific repair and refurbishment requirements for each dumpster, including replacing the metal bottom and 6 inches of sides with 10-gauge A36 steel, installing a 1-1/2" NPT threaded drain flange, and adding five structural channels with doubler plates to reinforce the bottom.
Additional requirements include installing a new 10-gauge A36 steel lid bridge with hinge brackets, adding new 58-inch double wall plastic lids with nickel-plated hinge rods, and ensuring dumpsters are restored to "like new" condition. The specifications mandate comprehensive surface preparation and painting with "cardboard dumpster" green enamel paint, both inside and out. Each dumpster must be equipped with lock bars across the top of lids. This document appears to be part of a larger Naval Facilities Engineering Command solicitation (N4008525R2529) for Landfill Maintenance and Repair Services posted on February 27, 2025.
View the file
Other files
Show all 31
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ATTACHMENT J-1502000-04-1
CARDBOARD DUMPSTER REPAIR ITEMS
8 CY CARDBOARD DUMPSTER REPAIRS ITEMS
SPECIFIC REQUIREMENTS. EACH CARDBOARD DUMPSTER SHALL HAVE THE FOLLOWING REPAIRS MADE.
1. REPLACE METAL BOTTOM AND SIX INCHES UP ON EACH OF THE SIDES WITH 10-GAGE A36 STEEL.
2. INSTALL A 1-1/2” NPT THREADED DRAIN FLANGE.
3. INSTALL FIVE NEW 3-INCH STRUCTURAL CHANNELS 6-INCHES LONG (6”X 6”X .130 THICK), A606-4 CORTEN©, DOUBLER PLATES.
THE DOUBLER PLATES ARE WELDED TO THE BOTTOM OF THE DUMPSTER TO PREVENT THE STRUCTURAL CHANNEL FROM PUSHING
THROUGH THE BOTTOM OF THE DUMPSTER.
4. INSTALL A NEW, 10-GAUGE A36 STEEL LID BRIDGE WITH FIVE LID HINGE BRACKETS.
5. INSTALL TWO NEW 58-INCH DOUBLE WALL PLASTIC LIDS, WITH NICKEL PLATED HINGE RODS.
6. INSURE EACH DUMPSTER IS IN “LIKE NEW” CONDITION. EXAMPLE: SIDE SLIDING DOORS MUST BE IN GOOD WORKING CONDITION, SIDE SLEEVES FOR FRONT LOADER ARMS MUST NOT BE SPLIT OR DAMAGED, PATCHING ANY OTHER HOLES IN DUMPSTER
MUST BE PERFORMED, ETC.
7. ALL DUMPSTER SURFACES (INSIDE AND OUT) SHALL BE SANDED, PREPPED, PRIMED, AND PAINTED WITH “CARDBOARD DUMPSTER” GREEN ENAMEL PAINT. REMOVE ALL BLISTERING, CRACKING, FLAKING, PEELING, OR ANY DETERIORATED COATINGS.
8.ALL CARBOARD DUMPSTER MUST HAVE LOCK BARS ACROSS THE TOP OF LIDS.
File details come from the government source that posted it. Updated .