J-1502000-02 REFERENCES AND TECHNICAL SPECIFICATIONS (NEW).docx

ATTACHMENT J-1502000-02

REFERENCES AND TECHNICAL SPECIFICATIONS

4 CY DROP BOTTOM SPECS

Measurements:

Material:

Two full length runners 3 inch x 83 inch channel. (4.1 lbs per foot) on bottom (width, side to side) complete with Corten A606 full length Doubler Plates 6 inch x 83 inch x .130 minimum thickness between the 3 inch channel and the bottom of the drop bottom dumpster.

Solid Top, Sides, Back & Front 3/16 inch plate

Bottoms 3/16, with Dempster style hinged drop bottom.

3” Re-enforced structure channel around Top on inside.

1 ½ inch dia lift eye connected at the center/back edge on top with 19 inch centers

Lift Pins 2 inch dia x 2 inches long with oval shaped end plate 2 inches x 5 inches x ½ inch thick mounted on a 4 inch x 21 inch channel rounded solid at the top where the lift pin connects.

Two 6 inch long x 1 ¼ inch dia chain brace with supports on each side (on back edge) for dumping.

Double sliding doors on back, each door 12 guage 20 inches high x 20 inches wide framed up with 3/16 door tracks.

4 inch wide x ¼ inch thick flat bar to serve as a flange on the inside and outside where the bottom closes against the dumpster 2 inside and 2 outside on each side.

3 inch x 83 inch angle iron welded on the very bottom backside just above the hinges for support.

The service provider shall supply a certificate of authenticity for the A606-4 Corten© doubler plates.

Paint:

Containers Primed and Painted Brown to Government specs (Eco-Friendly Paint Brands) and that will meet and exceed all general Fabrication methods in Quality and Workmanship.

6 CY DROP BOTTOM SPECS

Measurements:

Three full length runners, 3 inch x 83 inch channel. (4.1 lbs per foot) on bottom (width, side to side) complete with Corten A606 full length Doubler Plates 6 inch x 83 inch x .130 minimum thickness between the 3 inch channel and the bottom of the drop bottom dumpster. Runners connect at front at back and in the middle on bottom.

Sides, Back & Front 3/16 inch plate

Bottoms 3/16, with Dempster style hinged drop bottom.

3” Re-enforced structure channel around Top and also to frame up around lift hook.

Lift hook 1 ½ inch dia connected in center/back of dumpster set in at back 16 inches wide and 20 inches high to top of dumpster. Make sure the lift hook is straight across and not curved/bowed.

Lift Pins 2 inch dia x 2 inches long with oval shaped end plate 2 inches x 5 inches x ½ inch thick mounted on a 4 inch x 24 inch channel rounded solid at the top where the lift pin connects.

Two 6 inch long x 1 ¼ inch dia chain brace with supports on each side (on back edge) for dumping.

4 inch wide x 20 inches long x ¼ inch thick flat bar to serve as a flange on the inside and outside where the bottom closes against the dumpster 2 inside and 2 outside on each side.

3 inch x 83 inch angle iron welded on the very bottom backside just above the hinges for support.

The service provider shall supply a certificate of authenticity for the A606-4 Corten© doubler plates

Containers Primed and Painted Brown to Government specs (Eco-Friendly Paint Brands) and that will meet and exceed all general Fabrication methods in Quality and Workmanship.

8 CY DROP BOTTOM OPEN TOP

Three full length runners, 3 inch x 83 inch channel. (4.1 lbs per foot) on bottom (width, side to side) complete with Corten A606 full length Doubler Plates 6 inch x 83 inch x .130 minimum thickness between the 3 inch channel and the bottom of the drop bottom dumpster. Runners connect at front at back and in the middle on bottom.

Open Top, Sides, Back & Front 3/16 inch plate. Sides will have sliding doors.

Bottoms 3/16, with Dempster style hinged drop bottom.

3” Re-enforced structure channel around Top and also to frame up around lift hook. Lift hook 1 ½ inch dia connected in center/back of dumpster set in at back. Make sure the lift hook is straight across and not curved/bowed.

Lift Pins 2 inch dia x 2 inches long with oval shaped end plate 2 inches x 5 inches x ½ inch thick mounted on a 4 inch x 24 inch channel rounded solid at the top where the lift pin connects.

Two 6 inch long x 1 ¼ inch dia chain brace with supports on each side (on back edge) for dumping.

4 inch wide x 20 inches long x ¼ inch thick flat bar to serve as a flange on the inside and outside where the bottom closes against the dumpster 2 inside and 2 outside on each side.

2 sliding doors 30 x 30 12 gauge 3/16 door tracts, one on each side with the door opening towards the lift hook side of the dumpster.

3 inch x 83 inch angle iron welded on the very bottom backside just above the hinges for support.

The service provider shall supply a certificate of authenticity for the A606-4 Corten©

Containers Primed and Painted Brown to Government specs (Eco-Friendly Paint Brands) and that will meet and exceed all general Fabrication methods in Quality and Workmanship.

8 CY DROP BOTTOM SOLID TOP

Three full length runners, 3 inch x 83 inch channel. (4.1 lbs per foot) on bottom (width, side to side) complete with Corten A606 full length Doubler Plates 6 inch x 83 inch x .130 minimum thickness between the 3 inch channel and the bottom of the dropbottom dumpster. Runners connect at front at back and in the middle on bottom.

Solid Top, Sides, Back & Front 3/16 inch plate. Sides will have sliding doors.

Bottoms 3/16, with Dempster style hinged dropbottom.

3” Re-enforced structure channel around Top and also to frame up around lift hook. Lift hook 1 ½ inch dia connected in center/back of dumpster set in at back. Make sure the lift hook is straight across and not curved/bowed.

Lift Pins 2 inch dia x 2 inches long with oval shaped end plate 2 inches x 5 inches x ½ inch thick mounted on a 4 inch x 24 inch channel rounded solid at the top where the lift pin connects.

Two 6 inch long x 1 ¼ inch dia chain brace with supports on each side (on back edge) for dumping.

4 inch wide x 20 inches long x ¼ inch thick flat bar to serve as a flange on the inside and outside where the bottom closes against the dumpster 2 inside and 2 outside on each side.

2 sliding doors 30 x 30 12 gauge 3/16 door tracts, one on each side with the door opening towards the lift hook side of the dumpster.

3 inch x 83 inch angle iron welded on the very bottom backside just above the hinges for support.

The service provider shall supply a certificate of authenticity for the A606-4 Corten©

Containers Primed and Painted Brown to Government specs (Eco-Friendly Paint Brands) and that will meet and exceed all general Fabrication methods in Quality and Workmanship.

8 CY, FRONT END LOADER, SQUARE TOP, TRASH DUMPSTER

step cover

with nickel plated lid hinge rods)

extend 6-inches up the walls of the dumpster

making floor ¼” thick where feet are placed

bottom of dumpster)

Top back slanted for 58 inch lids to fit or must have 10 gauge steel lid bridge

Containers Primed and Painted Brown to Government specs (Eco-Friendly Paint Brands) and that will meet and exceed all general Fabrication methods in Quality and Workmanship.

8 CY, FRONT END LOADER, CARDBOARD DUMPSTER

step cover

with nickel plated lid hinge rods)

extend 6-inches up the walls of the dumpster

making floor ¼” thick where feet are placed

bottom of dumpster)

Top back slanted for 58 inch lids to fit or must have 10 gauge steel lid bridge

Containers Primed and Painted Brown to Government specs (Eco-Friendly Paint Brands) and that will meet and exceed all general Fabrication methods in Quality and Workmanship.