J-0200000-06 - Service Provider Information.xlsx
XLSX spreadsheet 30 KB Posted
- Solicitation number
- N4019224R6000
About this file
This document provides details for a federal contract solicitation to provide facility management and facility investment services at Marine Corps Base Camp Blaz in Guam. The contractor will be responsible for providing all labor, management, supervision, tools, materials and equipment for facility management services under Annex 1501 and facility investment services under Annex 1502. Services may also be required at other locations on Guam as well as facilities on Rota, Tinian and Saipan in the Marianas chain. The solicitation was issued by the Department of the Navy Naval Facilities Engineering Command for base operations and facility investment services at Marine Corps installations located in Guam. Responses to solicitation number N4019224R6000 are due as specified in the attached request for proposal and associated documents.
View the file
Other files
Show 40 more
Latest 50 of 59 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1-Service Provider Info
ATTACHMENT J-0200000-06
SERVICE PROVIDER INFORMATION
| Interface: Service Provider | |
| VERSION #: | V1 |
| Current as of: | 7/7/2013 |
| Version History |
| V1 - Updated to reflect current interface in MAXIMO |
| TABS | |
| 1-Service Provider Info | This Sheet |
| 2-Service Provider Field List | Service Provider Template Data Format Information |
| 3-Service Provider - Template | Sample Excel Format |
2-Service Provider Field List
ATTACHMENT J-0200000-06
SERVICE PROVIDER INFORMATION
| Interface: Service Provider | ||||
| VERSION #: V1 | ||||
| Current as of: 7/7/2013 | ||||
| Service Provider (BOSC1) is a pipe delimited file. | ||||
| Position | Name | Required | Length | |
| Limit | Data Format Note | Field Definition | Content Notes | |
| <<Note to Spec Writer: Only the "Content Notes" field should be modified on this TAB, Delete this text box prior to publising, no other changes to this document should be made.>> | NAVFAC |
MAXIMO_FIELD
| 1 | Approved Date | N | 10 | MM/DD/YYYY hh:mm:ss | The Date on which the Work Order was last approved. If the file contains an Approved Date, then this date will be pulled over to the record. | |
| If the Approved Date in the file is null, then the Reported Date plus one minute will be displayed in the record. | APPROVEDDATE | |||||
| 2 | Work Type | Y | 15 |
Must match Value List in Maximo.
| (Cross-walked field.). Must match Crosswalk | Identifies the work order's type. |
| Example types are: preventive maintenance, corrective maintenance, emergency maintenance, capital project, and event report. | Value list in REFERENCE SPREADSHEET -or- |
For this contract the following are valid work types:
| CLIN XXXXXX use "XXXX" | WORKTYPE | |||||||
| 3 | Customer Reference Number | Y | 10 | Contractors internal work order tracking number. Will update Record if Value is found in Maximo otherwise new record (Work order) will be created. | SERVPRVREFCODE | |||
| 4 | Description | Y | 150 | Describes the work order. | ||||
| If the Description is null, in the inbound file, then this field is defaulted to CROSSWALK value. | DESCRIPTION | |||||||
| 5 | Location | Y | 30 | Must match Value List in Maximo | Identifies the work order's location. This is not necessarily the asset's location, however, if an asset is entered, its location will default here. | |||
| - If the Location is null, in the inbound file, then this field is defaulted to the site's base location. | Value list in REFERENCE SPREADSHEET | LOCATION | ||||||
| 6 | Reported By | N | 62 | Must match Value List in Maximo | Identifies the person reporting the work order. | Value list in REFERENCE SPREADSHEET -or- |
For this contract:
| - use the following identifier "XXXX" | REPORTEDBY | |||||
| 7 | Master System | N | N/A | Not used | N/A | |
| 8 | Status | Y | 16 | (Cross-walked field.) | ||
| Must match Crosswalk | Status of the work order, for example, in progress, waiting on material, waiting for approval, completed, or closed. | Value list in REFERENCE SPREADSHEET -or- |
For this contract:
| - use the following identifier "XXXX" | STATUS | ||||||
| 9 | Status Date | Y | 10 | MM/DD/YYYY hh:mm:ss | STATUSDATE | ||
| 10 | Priority | Y | 12 | (Cross-walked field.) | |||
| Must match Crosswalk | Identifies the importance of the work order, from 0-999, where 0 is the lowest priority and 999 is the highest. If the Priority is null, in the inbound file, then this field is defaulted. | Value list in REFERENCE SPREADSHEET | WOPRIORITY | ||||
| 11 | Actual Start | N | 10 | MM/DD/YYYY hh:mm:ss | ACTSTART | ||
| 12 | Actual Finish | N | 10 | MM/DD/YYYY hh:mm:ss | ACTFINISH | ||
| 13 | Supervisor | N | 30 | Must match Value List in Maximo | Value list in REFERENCE SPREADSHEET -or- |
For this contract:
| - use the following identifier "XXXX" | SUPERVISOR | |||||
| 14 | Labor Hours(Actual) | Y | 8 | Number (2 decimal places) | ACTLABHRS |
15 Labor Cost(Actual) Y 10 Number (2 decimal places) ACTLABCOST
16 Material Cost(Actual) Y 10 Number (2 decimal places) ACTMATCOST
| 17 | Duration | N | 8 | Number (2 decimal places) | Estimated remaining number of hours needed to complete the work. | ESTDUR | |
| 18 | Asset | N | 25 | Must match an existing ASSETNUM in Maximo | The asset number used must exist in NAVFAC MAXIMO prior to submission, or the record will be rejected. | Value list in REFERENCE SPREADSHEET |
| ASSETNUM | ||||||||
| 19 | Target Finish | N | 10 | MM/DD/YYYY hh:mm:ss | TARGCOMPDATE | |||
| 20 | Target Start | N | 10 | MM/DD/YYYY hh:mm:ss | TARGSTARTDATE | |||
| 21 | Reported Date | Y | 10 | MM/DD/YYYY hh:mm:ss | REPORTDATE | |||
| 22 | Lead | N | 30 | Must match Value List in Maximo | Lead person responsible for the work. | Value list in REFERENCE SPREADSHEET | LEAD | |
| 23 | Scheduled Start | N | 10 | MM/DD/YYYY hh:mm:ss | SCHEDSTART | |||
| 24 | Scheduled Finish | N | 10 | MM/DD/YYYY hh:mm:ss | SCHEDFINISH | |||
| 25 | Modified Date | Y | 10 | LEAVE BLANK | Leave blank/Do Not Use | Leave blank/Do Not Use | CHANGEDATE | |
| 26 | Modified By | Y | 30 | LEAVE BLANK | Leave blank/Do Not Use | Leave blank/Do Not Use | CHANGEBY | |
| 27 | PMNEXTDUEDATE | N | 4 | MM/DD/YYYY hh:mm:ss | PMNEXTDUEDATE | |||
| 28 | Is Task? | Y | 1 | Yes or No | ISTASK | |||
| 29 | Parent WO | N | 10 | Length Limit: 250 | Must exist in NAVFAC MAXIMO prior to submission or the record will be rejected. | Must exist in NAVFAC MAXIMO prior to submission or the record will be rejected. | PARENT | |
| 30 | Work Order | N | 10 | Must match Value List in Maximo | Used in updating record status on existing records. | WONUM | ||
| 31 | Detail Location | N | 250 | DETAILLOC | ||||
| 32 | CLIN | N | 30 | Contract Line Item Number | CLIN | |||
| 33 | Customer Ref Code | N | 8 | Must match Value List in Maximo | Value list in REFERENCE SPREADSHEET | CUSTOMERCODE | ||
| 34 | Sub Work Type | N | 15 | (Cross-walked field). | ||||
| Must match Crosswalk | Defaulted field based on the value of worktype | SUBWORKTYPE | ||||||
| 35 | Work Center | N | 8 | Must match Value List in Maximo | Value list in REFERENCE SPREADSHEET -or- |
For this contract:
- use the following identifier "XXXX" PERSONGROUP
3-Service Provider-Template
| ATTACHMENT J-0200000-06 | ||
| SERVICE PROVIDER INFORMATION | ATTACHMENT J-0200000-XX |
SERVICE PROVIDER INFORMATION
| Interface: Service Provider |
| VERSION #: V1 |
| Current as of: 7/7/2013 |
| Position | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | |
| Name | Approved Date | Work Type | Customer Reference Number | Description | Location | Reported By | Master System | Status | Status Date | Priority | Actual Start | Actual Finish | Supervisor | Labor Hours | ||||||||||||||||||||||
| (Actual) | Labor Cost | |||||||||||||||||||||||||||||||||||
| (Actual) | Material Cost | |||||||||||||||||||||||||||||||||||
| (Actual) | Duration | Asset | Target Finish | Target Start | Reported Date | Lead | Scheduled Start | Scheduled Finish | Modified Date | Modified By | PMNEXTDUEDATE | Is Task? | Parent WO | Work Order | Detail Location | CLIN | Customer Ref Code | Sub Work Type | Work Center | |||||||||||||||||
| Required Field(s) | N | Y | Y | Y | Y | N | N | Y | Y | Y | N | N | N | Y | Y | Y | N | N | N | N | Y | N | N | N | Y | Y | N | Y | N | N | N | N | N | N | N |
NOTES:
• ONLY COLUMNs 1-35, and rows containing data should be be included in the FLAT-FILE SUBMISSION;
• Pipe Delimited (.txt) - | (Pipe is at the end of the column. Must have 35 PIPEs per row.)
File details come from the government source that posted it. Updated .