Item 2 Specification

Item # __________________ C.S.I. Section 11420

P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602

BK45749 (08/16)

S L I C I N G a division of ITW Food Equipment Group LLC www.berkelequipment.com

X13AE-PLUS

AUTOMATIC GRAVITY FEED SLICER

Model X13AE-PLUS

STANDARD FEATURES

■■ 1-speed, 1⁄2 HP, permanently lubricated ball bearing knife motor with thermal protection.

■■ Automatic operation in three speeds: 20, 40 or 60 slices/minute.

■■ Three stroke lengths: 1⁄3, 2⁄3 and full stroke.

■■ Furnished in 120/60/1, 8 amps, AC, with 3 wire cord and plug.

■■ One-piece NSF approved polymer base and product table for reduced seams, accessibility and easy cleaning.

■■ Index knob conveniently located outside the drip zone in the upper left to provide quick and easy access.

■■ Variable pitch barrel cam for ultra fine, precise slice adjustment to a thickness of 15⁄16" (34 mm).

■■ 13" (330 mm) diameter, hollow ground, hardened and polished forged stainless steel knife

■■ Large product table with extra capacity:

■■ Articulating and full length rear mounted meat pusher to secure and advance products evenly, fence to hold product during automatic operation.

■■ Ergonomic, multi-grip handle to advance product table.

■■ Submersible, removable product table mounted sharpener for consistent sharpening and easy cleaning.

■■ Borazon sharpening stones for fast, accurate sharpening and extended life.

■■ No-volt release requires restarting the slicer after a power interruption.

■■ Permanent ring guard protects entire non-slicing portion of the knife.

■■ LED indicates power to the slicer.

■■ Sealed start/stop switches conveniently located on the index knob housing out of the food zone.

■■ An easy to use kick stand for easy cleaning under the slicer.

ACCESSORIES

Vegetable chute with pusher

Product fence

Slaw tray

FEATURES

Berkel model X13AE-PLUS automatic gravity feed slicer offers a number of special features. A sanitary one piece engineered polymer base and product table reduces seams and joints while providing an NSF approved surface for easy, effective cleaning. A removable and submersible table mounted sharpener with borazon stones for accurate sharpening.

Precise thickness control is achieved using a variable pitch barrel cam for fine adjustment and wafer thin slices. The index knob and operating controls are mounted outside of the drip zone for quick and easy access. The slicer can be automatically operated in three speeds, and with three different stroke lengths. A permanent ring guard protects the entire non-slicing portion of the knife during slicing and cleaning. A fence is included with the product table. An easy to use kick stand supports the slicer for easy access to clean under the slicer.

COMPLIES WITH NSF/ANSI STANDARD #8

P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602 a division of ITW Food Equipment Group LLC

BK45749 (08/16)

S L I C I N G

NOTE: As we continually strive to improve our products, specifications are necessarily subject to change without notice.

www.berkelequipment.com

X13AE-PLUS

AUTOMATIC GRAVITY FEED SLICER

SPECIFICATIONS

Thickness Control: Index knob controls a precision, variable pitch barrel cam with ultra-fine adjustment in the first revolution and opens to a thickness of 15⁄16" (34 mm) for accurate and consistent slicing. This control is located out of the drip zone on the upper left to provide quick and easy access for operation and cleaning.

Cutting Capacity: Shown in chart below.

Product Table: Full gravity feed 45° angle with articulating rear mounted pusher that runs the entire length of the table to secure product for increased yield and consistency in every slice. A fence provides stability for the product in automatic mode.

Kick Stand: An easy to use kick stand supports the slicer for easy access to clean under the slicer.

No-volt Release: Requires restarting the slicer in the event of a power interruption.

Knife Ring Guard: Permanent tapered guard covers the non-slicing portion of the knife edge.

Controls: Sealed push-button switches located on the index knob housing out of the drip zone.

Warranty: Parts, labor and travel coverage for one year, exclusive of wear items.

Motor: Knife motor is 1-speed, 1⁄2 HP totally enclosed and permanently lubricated ball bearings, thermally protected. Table motor is brushless DC providing three fixed speeds, 20, 40 or 60 slices per minute. Three stroke lengths in the automatic mode, provide more slices/minute at the same speed.

Electrical: Furnished in 120/60/1, 8 amps, AC, ETL Listed, with a 6' long 3-wire cord and plug.

Finish/Construction: Base, product table, pusher, support arm and upper housing are constructed of NSF approved, engineered polymers reducing the number of seams. Gauge plate and center plate are anodized aluminum. All controls are sealed and located out of the drip zone.

Knife: 13" (330 mm) diameter, hollow ground, hardened and polished stainless steel.

Knife Sharpener: Removable and submersible table mounted, two stone, dual action design to ensure correct pressure and contact angle are always applied, thus reducing knife wear and delivering a perfect edge. Borazon stones last longer, sharpen faster and clean easier.

MODEL

NUMBER CUTTING CAPACITY

SLICE

THICKNESS

KNIFE

DIA.

PRODUCT DIMENSIONS

WIDTH DEPTH HEIGHT

X13AE-PLUS

Rectangle 101⁄2" x 63⁄4" (265 x 170 mm)

Square 71⁄2" (190 mm) Round 81⁄2" (220 mm)

15⁄16" (34 mm)

13" (330 mm)

28" (710 mm)

30" (762 mm)

26" (660 mm)

MODEL

NUMBER MOTOR ELECTRICAL WEIGHT

BOX DIMENSIONS

WIDTH DEPTH HEIGHT

X13AE-PLUS

1-speed

1⁄2 HP

120/60/1 8 amps

Net 96 lbs. (43 kg) Ship 126 lbs. (57 kg)

31" (787 mm)

31" (787 mm)

31" (787 mm)