576Final_hzmat_report_part_9_of_9.pdf

Appendix D: Regulatory Matrix

REGULATIONS MATRIX FOR ASBESTOS AND LEAD

Descriptions 29 CFR 1926.1101 and 29 CFR

1960 (OSHA Construction Standard)

40 CFR 61

(Asbestos NESHAP)

40 CFR 170-179 and Other Citations (DOT)

8 AAC 61-600-790

(Alaska OSHA)

18 AAC 60.450

(ADEC)

Miscellaneous construction mastics Transite Pipe

Class II asbestos work when removed intact and with an NEA may be removed without critical barriers.

Category I non-friable ACM which has not or will not be subjected to sanding, grinding, cutting, or abrading does not become an asbestos-containing waste material. No requirements for wetting, bagging, or labeling. Can be left in facility during demolition and disposed of as construction debris.

N/A, unless intact then it becomes a Hazard Class 9.

Class II asbestos work when removed intact and an NEA conducted may be removed without Neg. pressure encl. or critical barriers with approval of dept.

Wetting, bagging, and labeling required. Minimum worker training 40-hr MAP supervisor training and department certification. Regulated area must be established.

Disposal of non- RACM allowed in municipal landfill if: it is permitted, the waste is covered within 24 hrs.

using procedures that prevent the release of asbestos fibers to the air or to surface water, no fires have occurred in the landfill for more than 1 year, and the landfill will accept the waste.

ACM – Asbestos Containing Material ADEC – Alaska Department of Environmental Conservation CFR – Code of Federal Regulations DOT – Department of Transportation MAP – Model Accreditation Plan NEA – Negative Exposure Assessment NESHAP - National Emission Standards for Hazardous Air Pollutants OSHA – Occupational Safety and Health Administration RACM – Regulated Asbestos Containing Material

REGULATIONS MATRIX FOR ASBESTOS AND LEAD

Descriptions HUD Guidelines EPA TSCA Section 403

Standard – January 2001

29 CFR 1926.62

(OSHA Construction Standard)

40 CFR 261

(RCRA)

Safe Drinking Water Act

(EPA)

Organic Lead Lead Paint

Action Levels 0.5% by weight = 5,000 ppm

(Atomic Absorption Spectroscopy)

1.0 mg/cm2 (XRF) Requires worker HUD/EPA worker training.

Soils > 400 ppm Hazardous in play areas > 1,200 ppm Bare soil yard wide average

Dust

> 40ug/ft2 Floors > 250 ug/ft2 Interior window sills > 400 ug/ft2 Window troughs

Air 50 ug/m3; OSHA PEL 8 hour

TWA

30 ug/m3; OSHA Action Level

8 hour TWA Requires worker training for Class 1, Class 2 or Class 3 tasks

Waste TTLC lead only 1000mg/kg STLC lead only 5.0 mg/L TCLP lead only 5.0 mg/L

Action Level 15 ppb

< - Less than > - Greater than XRF – X-ray Florescence CFR – Code of Federal Regulations RCRA – Resource Conservation and Recovery Act HUD – Housing Urban Development TSCA – Toxic Substances Control Act EPA – Environmental Protection Agency mg/L – Milligrams per Liter OSHA – Occupational Safety and Health ug/m3 – Micrograms per cubic meter TTLC – Total Threshold Concentration ug/ft2 – Micrograms per square foot STLC – Soluble Threshold Limit Concentration ug/cm2 – Micrograms per centimeter squared TCLP – Toxicity Characteristic Concentration mg/kg – Milligrams per Kilograms PEL – Permissible Exposure Limit TWA – Time Weighted Average ppb – parts per billion ppm – parts per million

5.2Lead Results

6.2Lead Results