CED 2P17 Orchard Bin Set.pdf
PDF 153 KB Posted
- Attached to
- Wood Displays and Fixtures
- Solicitation number
- HQC00426WOOD0001
- Issued by
-
Defense Commissary Agency
About this file
This document is a Minimal Acceptable Standards specification for the Produce Department's Orchard Bin Set (2P17), revised on 04/12/24. The specification establishes requirements for a wood-constructed floor display merchandising unit consisting of four separate orchard bin components that can be used independently.
The orchard bin set shall be constructed of oak with light oak coloring and moisture-resistant protective sealant. Three dimensional configurations are specified: one unit measuring 24"L/W x 24"D x 36"H, two units measuring 36"L/W x 24"D x 30"H, and one unit measuring 36"L/W x 36"D x 22"H, with dimensional tolerances of plus or minus 2 inches in any direction. Each bin requires black plastic liners and shall include a square pedestal riser measuring 18"L/W x 8"H with a ¾ inch lip. The product must ship ready for use and be accompanied by a point of contact for service, installation and operating instructions, and a parts list. A one-year warranty covering defective material and workmanship, including parts, service, and labor, is required from the date of delivery. The contractor must provide continued parts support for the projected equipment lifecycle plus five years. No electrical requirements or special safety instructions apply to this equipment. The Federal Supply Class is 7195.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
INITIATED
11/24/17
CED
PRODUCE
DEPARTMENT
Minimal Acceptable Standards
REVISION
04/12/24
2P17 Orchard Bin Set PAGE 2 of 4
FY16r.05
1 Purpose of this Equipment: To accent and merchandise selected produce in a walk around floor display.
2 Federal Supply Class: 7195
3 General Operating Specifications:
3.1 Dimensions:
3.1.1 1 unit: 24 inches long / wide, 24 inches deep, 36 inches high.
3.1.2 2 units: 36 inches long / wide, 24 inches deep, 30 inches high.
3.1.3 1 unit: 36 inches long / wide, 36 inches deep, 22 inches high.
3.1.4 Dimensional sizes may vary plus or minus 2 inches in any direction.
3.2 Salient Characteristics that shall be provided:
3.2.1 Oak construction
3.2.2 Orchard bin design consisting of 4 (four) units that can be used separately.
3.2.3 Moisture resistant protective sealant.
3.2.4 Black plastic liners for all units.
3.2.5 Square Pedestal Riser
3.2.5.1 18 inches long/wide, 8 inches high, ¾ inch lip.
3.3 Industry Standards / Requirement(s):
3.3.1 Warranty period shall be for (1) year from date of delivery against defective material and workmanship and shall include parts, service and labor.
3.4 Information Technology requirements: N / A
3.5 Color Requirement(s): Light Oak
4 Electrical Requirements: N / A
5 Standard Contractor Requirements:
5.1 Must be shipped ready to use.
5.2 Information to be provided by the Contractor to the commissary at the time of delivery:
5.2.1 Point of Contact for Service
5.2.2 Installation and Operating Instructions
5.2.3 Parts List
5.3 Maintenance Sustainability Requirements: Continued parts support is required for the projected life cycle of the equipment plus 5 years.
INITIATED
11/24/17
CED
PRODUCE
DEPARTMENT
Minimal Acceptable Standards
REVISION
04/12/24
2P17 Orchard Bin Set PAGE 3 of 4
FY16r.05
6 Special Coordinating / Safety Instructions: N / A
| 1 Purpose of this Equipment: To accent and merchandise selected produce in a walk around floor display. |
| 3.3 Industry Standards / Requirement(s): |
| 3.5 Color Requirement(s): Light Oak |
| 5 Standard Contractor Requirements: |
| 6 Special Coordinating / Safety Instructions: N / A |
File details come from the government source that posted it. Updated .