CED 2B07-D Table- Bakery- Double Sided.pdf
PDF 154 KB Posted
- Attached to
- Wood Displays and Fixtures
- Solicitation number
- HQC00426WOOD0001
- Issued by
-
Defense Commissary Agency
About this file
This document is a Minimal Acceptable Standards specification for a bakery display table equipment item (2B07-D) for federal procurement. The specification defines requirements for a double-sided, flat-top shelf table designed to provide 360-degree bakery goods display for patron self-service selections, classified under Federal Supply Class 7310.
The table shall measure 49 inches long/wide by 54 inches deep by 45 inches high, with dimensional tolerances of plus or minus 2 inches in any direction. It must consist of two separate sections: a double-sided table with a flat bed-type top shelf (46 inches long/wide, 25 inches deep, 2 to 5 inches high) and two tier removable side shelves, constructed entirely of oak with moisture-resistant protective sealant. The base requires four steel legs and four casters (2 swivel and minimum 2 locking), with each side featuring a pull-out drawer extending 13 to 19 inches equipped with black plastic or flexible vinyl bumpers. The finish color shall be light oak. The contractor must ship the unit pre-drilled and ready to assemble, and provide a one-year warranty covering parts, service, and labor against defective material and workmanship. At delivery, the contractor must supply a point of contact for service, installation and operating instructions, and a parts list. The contractor must maintain continued parts support for the projected life cycle of the equipment plus five additional years.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
INITIATED
10/30/17
CED
BAKERY
DEPARTMENT
Minimal Acceptable Standards
REVISION
04/12/24
2B07-D Table, bakery, double-sided, flat top shelf PAGE 2 of 4
FY16r.05
1 Purpose of this Equipment: To provide a 360 degree bakery goods display for patron self-service selections.
2 Federal Supply Class: 7310
3 General Operating Specifications:
3.1 Dimensions:
3.1.1 49 inches long / wide, 54 inches deep, 45 inches high. (Double-sided table).
3.1.2 47 inches long / wide, 17 inches deep. (Bottom side shelf)
3.1.3 27 inches long / wide, 13 inches deep. (Top side shelf)
3.1.4 Dimensional sizes may vary plus or minus 2 inches in any direction.
3.2 Salient Characteristics that shall be provided:
3.2.1 Consists of two separate sections, the double-sided table and two tier removable side shelves.
3.2.2 Oak construction.
3.2.3 Moisture resistant protective sealant.
3.2.4 Casters, 2 swivel and minimum 2 locking.
3.2.5 Four steel legs.
3.2.6 Double sided table components:
3.2.6.1 Bed-type top shelf that lies flat. (46 inches long / wide, 25 inches deep, 2 to 5 inches high)
3.2.6.2 Pull-out drawer on each side that extends out 13 to 19 inches.
3.2.6.3 Black plastic or flexible vinyl bumper on both pull-out drawers.
3.3 Industry Standards / Requirement(s):
3.3.1 Warranty period shall be for (1) year from date of delivery against defective material and workmanship and shall include parts, service and labor.
3.4 Information Technology requirements: N / A
3.5 Color Requirement(s): Light Oak
4 Electrical Requirements: N / A
5 Standard Contractor Requirements:
5.1 Must be shipped pre-drilled and ready to assemble.
5.2 Information to be provided by the Contractor to the commissary at the time of delivery:
INITIATED
10/30/17
CED
BAKERY
DEPARTMENT
Minimal Acceptable Standards
REVISION
04/12/24
2B07-D Table, bakery, double-sided, flat top shelf PAGE 3 of 4
FY16r.05
5.2.1 Point of Contact for Service
5.2.2 Installation and Operating Instructions
5.2.3 Parts List
5.3 Maintenance Sustainability Requirements: Continued parts support is required for the projected life cycle of the equipment plus 5 years.
6 Special Coordinating / Safety Instructions: N / A
| 1 Purpose of this Equipment: To provide a 360 degree bakery goods display for patron self-service selections. |
| 3.3 Industry Standards / Requirement(s): |
| 3.5 Color Requirement(s): Light Oak |
| 5 Standard Contractor Requirements: |
| 6 Special Coordinating / Safety Instructions: N / A |
File details come from the government source that posted it. Updated .