CED 2P16-A and B Orchard Bin Iced Alco Designs.pdf
PDF 155 KB Posted
- Attached to
- Wooden Display Fixtures
- Solicitation number
- HQC004-25-Q-E014
- Issued by
-
Defense Commissary Agency
About this file
This document is a Minimal Acceptable Standards specification for an Orchard Bin (2P16) used in the Produce Department. The specification details a wooden display fixture for bulk produce items like pumpkins and watermelons, with two variants: a dry display (2P16-A) and an iced display (2P16-B). Key specifications include oak construction, 48-inch dimensions, 1,600-pound product capacity, reinforced corners, swiveling and locking casters, adjustable plywood bottoms, and a double-sided chalkboard sign. The iced display variant includes a 3-6 inch deep liner, drain port, and drainage system with storage tank, hose, and cutoff valve. The equipment requires a one-year warranty covering parts, service, and labor, and must be shipped ready to use with installation instructions and parts list provided at delivery.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
INITIATED
11/07/2017
CED
Produce
DEPARTMENT
Minimal Acceptable Standards
REVISION
04/12/24
2P16 Orchard bin PAGE 2 of 4
FY16r.05
1 Purpose of this Equipment: To display dry or iced bulk produce items such as pumpkins or watermelons.
2 Federal Supply Class: 7310
3 General Operating Specifications:
3.1 Dimensions:
3.1.1 48 inches long / wide, 48 inches deep, 32 inches high
3.1.2 Dimensional sizes may vary plus or minus 2 inches in any direction.
3.2 Salient Characteristics that shall be provided:
3.2.1 Oak construction.
3.2.2 Moisture resistant protective sealant.
3.2.3 Corners to be reinforced with steel or heavy duty plastic.
3.2.4 Minimum product holding capacity of 1,600 pounds.
3.2.5 One side of bin to be hinged as a door to allow drop down access to upper surface area.
3.2.6 Casters: 2 swiveling and 2 locking.
3.2.7 2 adjustable plywood bottoms for mass display height variation.
3.2.8 Sign:
3.2.8.1 Double sided chalkboard approximately 24 inches long, 12 inches high.
3.2.8.2 Total height with metal sign holder to be approximately 30 inches.
3.2.8.3 Sign holder to include chalk and eraser.
3.2.9 2P16-A: Dry
3 to 6 inch flat top liner for non-iced / dry display.
3.2.1 2P16-B: Iced
3.2.1.1 3 to 6 inch deep liner for iced display.
3.2.1.2 Drain port.
3.2.1.3 Drain system for iced display to include; storage tank, hose and cutoff valve.
3.3 Industry Standards / Requirement(s):
3.3.1 Warranty period shall be for (1) year from date of delivery against defective material and workmanship and shall include parts, service and labor.
3.3.2
3.4 Information Technology requirements: N / A
INITIATED
11/07/2017
CED
Produce
DEPARTMENT
Minimal Acceptable Standards
REVISION
04/12/24
2P16 Orchard bin PAGE 3 of 4
FY16r.05
3.5 Color Requirement(s): N / A
4 Electrical Requirements: N / A
5 Standard Contractor Requirements:
5.1 Must be shipped ready to use.
5.2 Information to be provided by the Contractor to the commissary at the time of delivery:
5.2.1 Point of Contact for Service
5.2.2 Installation and Operating Instructions
5.2.3 Parts List
5.3 Maintenance Sustainability Requirements: Continued parts support is required for the projected life cycle of the equipment plus 5 years.
6 Special Coordinating / Safety Instructions: N / A
| 1 Purpose of this Equipment: To display dry or iced bulk produce items such as pumpkins or watermelons. |
| 3.3 Industry Standards / Requirement(s): |
| 3.5 Color Requirement(s): N / A |
| 5 Standard Contractor Requirements: |
| 6 Special Coordinating / Safety Instructions: N / A |
File details come from the government source that posted it. Updated .