CED 2P30-S3R and S3L Display- produce- end cap- crate style.pdf
PDF 221 KB Posted
- Attached to
- Wooden Display Fixtures
- Solicitation number
- HQC004-25-Q-E014
- Issued by
-
Defense Commissary Agency
About this file
This document is a Minimal Acceptable Standards specification for produce department display fixtures (2P30-S) issued by the Defense Commissary Agency (DeCA). The specification details requirements for wooden end cap displays designed to increase merchandising area, with two model variations (2P30-S3R and 2P30-S3L) that are 36 inches long/wide, 12 inches deep, and 50 inches high. Key technical requirements include oak construction, moisture-resistant sealant, 2 swivel and 2 locking casters, a stacked crate aesthetic, and a solid wood bottom merchandising area in light oak color.
The document provides comprehensive procurement details including recommended manufacturers (Alco Designs and JSI Store Fixtures), contract number HDEC04-20-D-0008, and an estimated 8-year equipment lifecycle. Contractor requirements mandate shipping assembled and ready to use, providing a one-year warranty covering parts and labor, and maintaining parts support for the equipment's projected lifecycle plus 5 years. The specification is part of a broader DeCA market research effort for wooden display fixtures, with an order request form included to facilitate procurement by individual commissary locations.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
INITIATED
11/07/17
CED
PRODUCE
DEPARTMENT
Minimal Acceptable Standards
REVISION
04/12/24
2P30-S Display, produce, end cap, crate style PAGE 1 of 4
FY16r.05
ORIGINATOR: Dionne Kuria
CHECKED BY: Shameika Majors
APPROVED BY: Russell Ellison
Revisions Revision No Revision Date Description/Location of Change(s) Initials
1 9/24/2018 3.1.3 Removed “such as length/width, and height” SM
RECOMMENDED SOURCES
(Basis of Design)
MANUFACTURER MODEL NUMBER WEBSITE
Alco Designs 2P30S3R/2P30S3R www.alcodesigns.com
JSI Store Fixtures EC0363/EC0364 www.jsistorefixtures.com
CONTRACT NUMBER MODEL SELECTED EQUIPMENT COST (FINAL YEAR)
HDEC04-20-D-0008
ESTIMATED LIFE CYCLE UNIT OF PACK NSN IF APPLICABLE
8 Each N / A
Basis of Allocation: K-1A and K-1 (1 each), K-2 and K-3 (1 each), K-4 (1 each), K-5 (1 each), the amount allowed per store is / is not a mandatory requirement.
CED UPDATED TO:
COPY IN BOOK COPY POSTED TO ACED ELECTRONIC COPY TO LELE DRIVE
INITIALS: INITIALS: INITIALS:
DEPARTMENT
Minimal Acceptable Standards
REVISION
2P30-S Display, produce, end cap, crate style PAGE 2 of 4
1 Purpose of this Equipment: To serve as end caps for produce displays and increase usable merchandising area.
2 Federal Supply Class: 7125
3 General Operating Specifications:
3.1 Dimensions:
3.1.1 2P30-S3R 36 inches long / wide, 12 inches deep, 50 inches high.
3.1.2 2P30-S3L 36 inches long / wide, 12 inches deep, 50 inches high.
3.1.3 Dimensional sizes may vary plus or minus 3 inches in any direction.
3.2 Salient Characteristics that shall be provided:
3.2.1 Oak construction.
3.2.2 Moisture resistant protective sealant.
3.2.3 Casters: 2 swivel and minimum 2 locking per end cap.
3.2.4 Creating a stacked crate effect.
3.2.5 Bottom of crate merchandising area to be one solid piece of wood.
3.3 Industry Standards / Requirement(s):
3.3.1 Warranty period shall be for (1) year from date of delivery against defective material and workmanship and shall include parts, service and labor.
3.4 Information Technology requirements: N / A
3.5 Color Requirement(s): Light Oak
4 Electrical Requirements: N / A
5 Standard Contractor Requirements:
5.1 Must be shipped assembled and ready to use
5.2 Information to be provided by the Contractor to the commissary at the time of delivery:
5.2.1 Point of Contact for Service
5.2.2 Installation and Operating Instructions
5.2.3 Parts List
5.3 Maintenance Sustainability Requirements: Continued parts support is required for the projected life cycle of the equipment plus 5 years.
DEPARTMENT
Minimal Acceptable Standards
REVISION
2P30-S Display, produce, end cap, crate style PAGE 3 of 4
6 Special Coordinating / Safety Instructions: N / A
DEPARTMENT
Minimal Acceptable Standards
REVISION
2P30-S Display, produce, end cap, crate style PAGE 4 of 4
ORDER REQUEST
STORE NAME: __________________________ DODAAC: ____________________
QUANTITY: _____ (ea) 2P30-S3R _____ (ea) 2P30-S3L
| 1 Purpose of this Equipment: To serve as end caps for produce displays and increase usable merchandising area. |
| 3.3 Industry Standards / Requirement(s): |
| 3.5 Color Requirement(s): Light Oak |
| 5 Standard Contractor Requirements: |
| 6 Special Coordinating / Safety Instructions: N / A |
File details come from the government source that posted it. Updated .