CED 2B07-D Table-Bakery- Double Sided.pdf
PDF 154 KB Posted
- Attached to
- Wooden Display Fixtures
- Solicitation number
- HQC004-25-Q-E014
- Issued by
-
Defense Commissary Agency
About this file
This document is a Minimal Acceptable Standards specification for a bakery display table issued by the Bakery Department. The specification details a double-sided bakery goods display table with precise dimensional requirements: 49 inches long/wide, 54 inches deep, and 45 inches high, with allowable variations of plus or minus 2 inches. Key characteristics include oak construction, a moisture-resistant protective sealant, two-tier removable side shelves, 2 swivel and 2 locking casters, four steel legs, and pull-out drawers with black plastic or flexible vinyl bumpers.
The table is designed for 360-degree patron self-service and must be shipped pre-drilled and ready to assemble in a light oak color. Contractors must provide a point of contact for service, installation and operating instructions, and a parts list. The equipment comes with a one-year warranty covering defective materials and workmanship, and requires continued parts support for the projected life cycle plus 5 additional years. The specification is part of a broader Defense Commissary Agency (DeCA) market research effort for wooden display fixtures at commissary locations.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
INITIATED
10/30/17
CED
BAKERY
DEPARTMENT
Minimal Acceptable Standards
REVISION
04/12/24
2B07-D Table, bakery, double-sided, flat top shelf PAGE 2 of 4
FY16r.05
1 Purpose of this Equipment: To provide a 360 degree bakery goods display for patron self-service selections.
2 Federal Supply Class: 7310
3 General Operating Specifications:
3.1 Dimensions:
3.1.1 49 inches long / wide, 54 inches deep, 45 inches high. (Double-sided table).
3.1.2 47 inches long / wide, 17 inches deep. (Bottom side shelf)
3.1.3 27 inches long / wide, 13 inches deep. (Top side shelf)
3.1.4 Dimensional sizes may vary plus or minus 2 inches in any direction.
3.2 Salient Characteristics that shall be provided:
3.2.1 Consists of two separate sections, the double-sided table and two tier removable side shelves.
3.2.2 Oak construction.
3.2.3 Moisture resistant protective sealant.
3.2.4 Casters, 2 swivel and minimum 2 locking.
3.2.5 Four steel legs.
3.2.6 Double sided table components:
3.2.6.1 Bed-type top shelf that lies flat. (46 inches long / wide, 25 inches deep, 2 to 5 inches high)
3.2.6.2 Pull-out drawer on each side that extends out 13 to 19 inches.
3.2.6.3 Black plastic or flexible vinyl bumper on both pull-out drawers.
3.3 Industry Standards / Requirement(s):
3.3.1 Warranty period shall be for (1) year from date of delivery against defective material and workmanship and shall include parts, service and labor.
3.4 Information Technology requirements: N / A
3.5 Color Requirement(s): Light Oak
4 Electrical Requirements: N / A
5 Standard Contractor Requirements:
5.1 Must be shipped pre-drilled and ready to assemble.
5.2 Information to be provided by the Contractor to the commissary at the time of delivery:
INITIATED
10/30/17
CED
BAKERY
DEPARTMENT
Minimal Acceptable Standards
REVISION
04/12/24
2B07-D Table, bakery, double-sided, flat top shelf PAGE 3 of 4
FY16r.05
5.2.1 Point of Contact for Service
5.2.2 Installation and Operating Instructions
5.2.3 Parts List
5.3 Maintenance Sustainability Requirements: Continued parts support is required for the projected life cycle of the equipment plus 5 years.
6 Special Coordinating / Safety Instructions: N / A
| 1 Purpose of this Equipment: To provide a 360 degree bakery goods display for patron self-service selections. |
| 3.3 Industry Standards / Requirement(s): |
| 3.5 Color Requirement(s): Light Oak |
| 5 Standard Contractor Requirements: |
| 6 Special Coordinating / Safety Instructions: N / A |
File details come from the government source that posted it. Updated .