CED 2P08 -C CED 2P08- F Table- tilt-top- European style.pdf
PDF 156 KB Posted
- Attached to
- Wooden Display Fixtures
- Solicitation number
- HQC004-25-Q-E014
- Issued by
-
Defense Commissary Agency
About this file
This document is a Minimal Acceptable Standards specification for a tilt-top, European-style produce display table for commissary use, identifying two model variants (2P08-C and 2P08-F) with specific technical requirements. The tables are designed for produce display, featuring oak construction, steel legs, tilt-top functionality with adjustable angles up to 45 degrees, and key safety features including rounded side rails, a clear front guard, and casters with locking capabilities. Detailed specifications include dimensional requirements (48 inches long/wide for 2P08-C, 36 inches long/wide for 2P08-F), a light oak color finish, and a one-year warranty covering parts, service, and labor.
Contractor requirements mandate that the tables be shipped fully assembled and ready for use, with the contractor required to provide a service point of contact, installation and operating instructions, and a parts list at delivery. The specification also stipulates continued parts support for the equipment's projected life cycle plus an additional 5 years. The document is part of a Defense Commissary Agency (DeCA) market research effort for wooden display fixtures, with the solicitation number HQC004-25-Q-E014 seeking wooden display fixtures for various commissary locations.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
INITIATED
10/31/17
CED
PRODUCE
DEPARTMENT
Minimal Acceptable Standards
REVISION
04/12/24
2P08 Table, tilt-top, European style PAGE 3 of 5
FY16r.05
1 Purpose of this Equipment: To display produce on a tilt-top surface to allow commissary patrons an unobstructed view of the product.
2 Federal Supply Class: 7310
3 General Operating Specifications:
3.1 Dimensions:
3.1.1 2P08-C: 48 inches long / wide, 36 inches deep.
3.1.2 2P08-F: 36 inches long / wide, 36 inches deep.
3.1.3 Dimensional sizes may vary plus or minus 2 inches in any direction.
3.2 Salient Characteristics that shall be provided:
3.2.1 Oak construction
3.2.2 Steel or metal legs on all models.
3.2.3 Moisture resistant protective sealant.
3.2.4 Table side rails / slats to be rounded on the edges for safety.
3.2.5 Casters: 2 swivel and minimum 2 locking.
3.2.6 Insert liners to fit flush within the table top.
3.2.7 All screws and fasteners to be finished and covered.
3.2.8 Adjustable steel bars with safety lock support the tilt-top table.
3.2.9 Adjustable steel bars allow a minimum of 5 possible display angles up to 45 degrees.
3.2.10 Table top will extend past the rear of table to allow tables to be placed flush back to back when top is raised.
3.2.11 Pull-out front drawer extending a minimum of 13 to 19 inches.
3.2.12 Clear front guard (product stop) to be approximately the length of the table, 6 inches high, and 4 inches deep with rounded edges for safety and allow unobstructed view of product.
3.2.13 Heavy duty ABS plastic pan insert to protect wooden slats on table top.
3.2.14 Minimum 1 inch wide black plastic bumper on pull out drawer.
3.3 Industry Standards / Requirement(s):
3.3.1 Warranty period shall be for (1) year from date of delivery against defective material and workmanship and shall include parts, service and labor.
3.4 Information Technology requirements: N / A
3.5 Color Requirement(s): Light Oak
INITIATED
10/31/17
CED
PRODUCE
DEPARTMENT
Minimal Acceptable Standards
REVISION
04/12/24
2P08 Table, tilt-top, European style PAGE 4 of 5
FY16r.05
4 Electrical Requirements: N / A
5 Standard Contractor Requirements:
5.1 Must be shipped assembled and ready to use
5.2 Information to be provided by the Contractor to the commissary at the time of delivery:
5.2.1 Point of Contact for Service
5.2.2 Installation and Operating Instructions
5.2.3 Parts List
5.3 Maintenance Sustainability Requirements: Continued parts support is required for the projected life cycle of the equipment plus 5 years.
6 Special Coordinating / Safety Instructions: N / A
| 1 Purpose of this Equipment: To display produce on a tilt-top surface to allow commissary patrons an unobstructed view of the product. |
| 3.3 Industry Standards / Requirement(s): |
| 3.5 Color Requirement(s): Light Oak |
| 5 Standard Contractor Requirements: |
| 6 Special Coordinating / Safety Instructions: N / A |
File details come from the government source that posted it. Updated .