Atch 15 - STO Supplemental Tech Data.doc

HC1028-10-R-2001

Attachment 15

TSO

EXCERPTS

(Supplemental information for the GSM-ETI Sample Task Order) Circuit 1

1.

PURPOSE: START A NEW LEASED DATS 1 LEASED TAIL T-1, ACCESS

2.

GENERAL CIRCUIT/TRUNK INFORMATION

G.

FULL DUPLEX

I.

1.544MB

J.

UNSECURE

K.

FULL PERIOD

L.

NO SIGNALING

3.

FACILITY AND EQUIPMENT INFORMATION

A.

OFFSITE CIRCUIT WITH COMMERCIAL LEASE

B.

(1)

(A) COMMERCIAL DEMARC (SMART JACK)

(B) INTERFACE: DS-1, SMART JACK, B8ZS/ESF; DISN ROUTER PROVIDED TIMING; (ELECTRICAL) B8ZS/ESF

(C) TERM: 4W

C.

(A) ADTRAN-MX2820-M-1/3-MUX (GFE) (DISA CORE PROVIDED)

(B) INTERFACE: PORT #4; LINE CODING: B8ZS; FRAME FORMAT: ESF; LINE BUILD OUT: 0-655FT

(D) RJ45, ADTRAN PATCH PANEL (GFE) (DISA CORE PROVIDED)

(E) CABLE CROSS CONNECT: CAT5

(2)

(A) CCDUJF AD0T NO SIG

D.

(A)

CISCO-ONS-15454-MSPP (GFE, DISA PROVIDED) NODE 40

(B) INTERFACE: VT1.5 ROUTING CROSSCONNECT

(C) TERM: LOGICAL

(A) CCDN9X AB0T NO SIG

(B) EXISTING FIBER

E

(A) CISCO 7613 ROUTER (NODE 40)

(B) INTERFACE: CHANNELIZED DS3, LINE CODING B3ZS, FRAME FORMAT C-BIT DISA ROUTER PROVIDED TIMING

(C) TERM: COAX

(D) UNIQUE INST FACT:

(1) PORT SE 1/0/0/2

Circuit 2

1.

PURPOSE: START A NEW LEASED DATS 1 LEASED TAIL T-1, ACCESS

OFFSITE CIRCUIT WITH COMMERCIAL LEASE

(A) COMMERCIAL DEMARC (SMART JACK)

(B) INTERFACE: DS-1, SMART JACK, B8ZS/ESF; DISN ROUTER PROVIDED TIMING; (ELECTRICAL) B8ZS/ESF

(A) ADTRAN-MX2820-M-1/3-MUX (GFE) (DISA CORE PROVIDED)

(B) INTERFACE: PORT #5; LINE CODING: B8ZS; FRAME FORMAT: ESF; LINE BUILD OUT: 0-655FT

(D) RJ45, ADTRAN PATCH PANEL (GFE) (DISA CORE PROVIDED)

(E) CABLE CROSS CONNECT: CAT5

CCDUJF AE0T NO SIG

CISCO-ONS-15454-MSPP (GFE, DISA PROVIDED) NODE 40

(B) INTERFACE: VT1.5 ROUTING CROSSCONNECT

(C) TERM: LOGICAL

(A) CCDN9X AA0T NO SIG

E

(A) CISCO 7613 ROUTER (NODE 40)

(B) INTERFACE: CHANNELIZED DS3, LINE CODING B3ZS, FRAME FORMAT C-BIT DISA ROUTER PROVIDED TIMING

(C) TERM: COAX

(1) PORT SE 1/0/0/1

Circuit 3

1.

PURPOSE: UPGRADE AN EXISTING NIPRNET ACCESS CIRCUIT FROM 12MB TO 30MB

30MB

ONSITE CUSTOMER ROUTER

(A) CISCO 7507 ROUTER (GFE-DISA) (NODE 40)

(B) INTERFACE: 100BASE-FX (62.5/125-MICRON MULTI-MODE FIBER), SC CONNECTOR

(C) TERM: OPTICAL

(D) UNIQUE INST FACT: CIRCUIT TERMINATES ON NIPERNET ROUTER, PORT FE 05/0/00

Circuit 4

1.

PURPOSE: START A 45MB NIPRNET ACCESS CIRCUIT

45MB

OFFSITE CIRCUIT WITH MSPP SERVICE

CISCO-ONS-15454-MSPP (MULTI-SERVICE PROVISIONING PLATFORM) (GFE); NODE 40; E100T-12 10/100 ETHERNET CARD (GFE-DISA); CONFIG: XMIT/RCVD: NODE 40/SLOT-14/PORT-3

(B) INTERFACE: 100MB FE UNSHIELDED TWISTED PAIR (UTP) (CAT-5) (RJ-45 TO RJ-45); XMIT/RCVD: MSPP TERMINAL RR 123/SLOT-14/PORT-3; RJ-45 TERMINATING PATCH PANEL (GFE) (DISA CORE PROVIDED) (RR TBD, SHELF TBD, PORTS TBD)

(C) TERM: 8W

(A) CCDN9X AB0T NO SIG

(A) CISCO 7507 ROUTER (GFE-DISA) (NODE 40)

(B) INTERFACE: RJ-45, 100BASE-TX FAST ETHERNET

(1) PORT FE 04/0/01

(2) FOR SITE SUPPORT TEAM (SST) CONTRACTOR: PROVIDE:

(A) 100BASE-TX (RJ-45) / 100BASE-FX (MM-SC) MEDIA CONVERTER

(B) DISN-31 CABLE BETWEEN THE MEDIA CONVERTER AND THE MSPP SDP (LENGTH TBD)

(C) MULTIMODE, SC-SC FIBER CABLE BETWEEN THE MEDIA CONVERTER AND THE NIPRNET HUB ROUTER SDP (LENGTH TBD)

Circuit 5

1.

PURPOSE: START A NEW 1.544MB NIPRNET ACCESS CIRCUIT

OFFSITE CIRCUIT FROM OFFSITE M13 AND MSPP

CISCO-ONS-15454-MSPP (GFE) (DISA CORE PROVIDED) NODE 40

(A) CCDU8R AT0T NO SIG

(B) INTERFACE: PORT #20, LINE CODING: B8ZS, LINE BUILD OUT: 0-655FT

(D) ADTRAN-MX2800-M-1/3-MUX

(E) ADTRAN PATCH PANEL

(A) DISN-31 CABLE FROM THE CSU/DSU TO THE HIGH SPEED MOD TAP (GFE)

INTERFACE: NESTED LARSCOM AM-01 CSU/DSU CARD (GFE)

LINE SIDE: B8ZS/ESF, RJ-48C, DISA ROUTER-PROVIDED TIMING

EQUIPMENT SIDE: V.35, SYNCHRONOUT

(B) TERM: 4W

UNIQUE INST FACT:

(1) PORT S4/1/7

(D) CISCO 7507 ROUTER (DISA PROVIDED) (NODE 40)

Circuit 6

1.

PURPOSE: REROUTE CIRCUIT

10MB

(A) TERM : RJ-45

(B) INTERFACE: CAT 5, UNSHIELDED TWISTED PAIR, RJ-45 CONNECTOR

(C) JUNIPER T-1600 ROUTER (GFE-DISA), PORT FE-4/1/1

Circuit 7

1.

PURPOSE: START A NEW LEASED DATS 1 LEASED TAIL T-1, ACCESS

OFFSITE CIRCUIT VIA OFFSITE M13 AND OFFSITE MSPP

(A) CISCO-ONS-15454-MSPP (GFE) (DISA CORE PROVIDED) NODE 40

(A) CCDU8R AP0T NO SIG

(B) INTERFACE: PORT #16; LINE CODING: B8ZS; LINE BUILD OUT: 0-655FT

(D) ADTRAN-MX2820-M-1/3-MUX

(E) ADTRAN PATCH PANEL

(A) DISN-31 CABLE FROM THE CSU/DSU TO THE HIGH SPEED MOD TAP (GFE)

INTERFACE: NESTED LARSCOM AM-01 CSU/DSU CARD (GFE)

LINE SIDE: B8ZS/ESF, RJ-48C, DISN ROUTER-PROVIDED TIMING

EQUIPMENT SIDE: V.35, SYNCHRONOUS

(1) SE4/1/6

(D) CISCO 7507 ROUTER (DISA PROVIDED) (NODE 40)

(2) (I) MSPP NODE 40

Circuit 8

1.

PURPOSE: START A NEW 50MB NIPRNET SERVICE

50MB

OFFSITE CIRCUIT FROM OFFSITE MSPP

CISCO-ONS-15454-MSPP (GFE) NODE 40, CE-100T-8, 8 PORT CARD FAST ETHERNET (DISA CORE PROVIDED), SLOT 16/PORT 5

(B) INTERFACE: FAST ETHERNET, 10/100BASE-T, RJ-45 CONNECTOR

(D) CABLE CROSS CONNECT, MAX 328 FT; TIA/EIA T568B, CAT 5 (SST PROVIDED)

(E) UNIQUE INST FACT:

(2) NO DISA PROVIDED PATCH PANEL. CONNECTION WILL BE DIRECTLY INTO THE INTERFACE CARD

C

(A) UNIQUE INST FACT:

(1) PORT GI9/4

INTERFACE: 10/100/1000BASE-TX; (PHYSICAL) RJ-45; (ELECTRICAL) ETHERNET

(D) CISCO 7613 ROUTER (DISA-GFE) (NODE 40)

Circuit 9

1.

PURPOSE: REROUTE CIRCUIT

60MB

(A) FIBER PATCH PANEL

(B) INTERFACE: MM FIBER, SC CONNECTOR

(C) TERM: OPTICAL

(A) TERM: OPTICAL

(B) INTERFACE: FAST ETHERNET, MM FIBER, SC CONNECTOR

(C) CISCO 7613 ROUTER, (DISA PROVIDED), PORT FA6/1 (NODE 40)

Circuit 10

1.

PURPOSE: REROUTE CIRCUIT

ONSITE CUSTOMER ROUTER, 100BASE-TX, RJ-45, FAST ETHERNET

CISCO-ONS-15454-MSPP (DISA PROVIDED), NODE 30

INTERFACE: INTERFACE CARD: CE-100T-88 PORT CARD FAST ETHERNET, SLOT 4/PORT 2

INTERFACE : FAST ETHERNET, 10/100BASE-T, RJ-45 CONNECTOR ; (PHYSICAL RJ-45 ; (ELECTRICAL) ETHERNET

OFFSITE MSPP AND OFFSITE CISCO 7613 NIPR ROUTER

Circuit 11

1.

PURPOSE: INCREASE BANDWIDTH FROM 30MB TO 60MB

ONSITE CUSTOMER PROVIDED ROUTER

INTERFACE: 100MB FE UNSHIELDED TWISTED PAIR (UTP) (CAT-5) (RJ-45 TO RJ-45)

XMIT/RCVD: MSPP TERMINAL RR 2018/SLOT-1/PORT-1

RJ-45 TERMINATING PATCH PANEL (GFE) (DISA CORE PROVIDED) RR 2017

(B)

E100T-12 10/100 ETHERNET CARD (GFE-DISA)

CISCO-ONS-15454-MSPP (MULTI-SERVICE PROVISIONING PLATFORM) (GFE); NODE 20; CONFIG: XMIT/RCVD: SLOT-1/PORT-1

TERM: 4W

OFFSITE MSPP AND OFFSITE CISCO 7613 NIPR ROUTER

Circuit 12

1.

PURPOSE: UPDATE CIRCUIT DATA, DOCUMENT ROUTER UPGRADE TO 7613 VICE 7507, CHANGE PORT ASSIGNMENTS TO PORT FA 6/6 VICE PORT FE 6/1/1

9MB

OFFSITE CUSTOMER ROUTER WITH OFFSITE SERVICE THROUGH DISA PROVIDED FORE SYSTEMS POWERHUB 7000 AND ASX-1000-FORE-SYSTEMS-ATM NODE

INTERFACE: SC, LINE CODING: OPTIC, FRAME FORMAT: SONET, FIBER CABLE

(B) MULTI MODE OC-3 INTERFACE CARD FABRIC-1/SLOT-A/PORT-1 (DISA DATMS TRUNK)

ASX-1000-FORE-SYSTEMS-ATM NODE

(D)

TERM: OPTICAL

CCDV09 001I NO SIG

(B) 1-A-1

INTERFACE:

EQUIP SIDE: 100BASE-TX, RJ-45

LINE SIDE: FIBER CABLE, LINE CODING: OPTIC, FRAME FORMAT: SONET

FORE SYSTEMS POWER HUB 7000 (PN 7105-00) (DISA PROVIDED), FAST ETHERNET BOARD (FORE PN 7360-00) WITH MEDIA ADAPTER (FORE PN 7262-00) (DISA PROVIDED) (ALREADY IN PLACE) (ST), SLOT-3, PORT-2

(D) INTERNAL FE MEDIA ADAPTER (GFE-DISA PROVIDED)

(E)

INTERFACE: 100BASE-FX, (62.5/125-MICRON MULTI-MODE FIBER), SC CONNECTOR

CISCO 7613 ROUTER (DISA PROVIDED) (NODE 40)

PORT FA 6/6

CONFIG: RJ-45

Circuit 13

1.

PURPOSE: UPDATE CIRCUIT DATA TO CHANGE FROM A CISCO 7507 TO A CISCO 7613, CHANGE PORT ASSIGNMENT FROM S4/1/3 TO SE4/0/7

OFFSITE CUSTOMER PROVIDED ROUTER WITH COMMERCIAL CIRCUIT LEASE

(A) COMMERCIAL INTERFACE CROSS CONNECT

(B) INTERFACE: CROSS-CONNECT, 1.544MB, B8ZS/ESF, SYNCHRONOUS, GOVERNMENT PROVIDED TIMING

DISN-31 CABLE (SITE PROVIDED) (ALREADY IN PLACE) FROM THE COMMERCIAL DEMARC TO THE DISA NESTED CSU/DSU

INTERFACE: LARSCOM ACCESS T-1500 NEST WITH AM-101 MODULE (DISA PROVIDED) (ALREADY IN PLACE)

LINE SIDE: B8ZS/ESF, UNCHANNELIZED, RJ-45, DISA ROUTER PROVIDED TIMING

EQUIPMENT SIDE: RS-530, SYNCHRONOUS

DISN-04 CABLE (SITE PROVIDED) (ALREADY IN PLACE) FROM THE DISA CSU/DSU TO THE BLACK PATCH PANEL

(D) BLACK PATCH PANEL (DISA PROVIDED) (ALREADY IN PLACE)

DISN-49 CABLE (DISA PROVIDED) (ALREADY IN PLACE)

(F) CISCO 7613 ROUTER (DISA PROVIDED) (ALREADY IN PLACE), CONFIG: RS-530 (NODE 40)

(G) TERM: 4W

(H) UNIQUE INST FACT: PORT SE 4/0/7

Circuit 14

1.

PURPOSE: REROUTE CIRCUIT

800MB

TERM: OPTICAL

INTERFACE: GIGABIT ETHERNET, SINGLE MODE, LC TO SC CONNECTORS

JUNIPER T-1600 ROUTER (GFE-DISA, PORT GE-7/0/1

Circuit 15

1.

PURPOSE: UPGRADE THE BANDWIDTH OF NIPRNET ACCESS CIRCUIT FROM 45MB TO 90MB

90MB

ONSITE CUSTOMER PROVIDED ROUTER, EXISTING CIRCUIT WILL BE REUSED

INTERFACE: 100BASEFX FAST ETHERNET, SC CONNECTORS

CISCO 7507 ROUTER (DISA PROVIDED) (ALREADY IN PLACE), CONFIG: SC CONNECTOR (NODE 40)

TERM: FIBER

UNIQUE INST FACT: PORT FA6/1/0

Circuit 16

1.

PURPOSE: REROUTE CIRCUIT

ONSITE USER PROVIDED ROUTER

(A) TERM: OPTICAL

(B) INTERFACE: 100MB FE E100T-12 10/100 ETHERNET CARD, TIA/EIA T568B (DISA) (SLOT 14, AND PORT 2); (PHYSICAL) MULTI-MODE 1310NM, SC CONNECTORS; (ELECTRICAL) ETHERNET

CISCO-ONS-15454-MSPP (MULTI-SERVICE PROVISIONING PLATFORM) (GFE), NODE 80

OFFSITE MSPP AND NIPR ROUTER

Circuit 17

1.

PURPOSE: START A 20MB NIPRNET ACCESS CIRCUIT

20MB

ONSITE CUSTOMER PROVIDED ROUTER AND SITE PROVIDED NORTEL ERS5530 SWITCH

NORTEL ERS5530 SWITCH (SITE PROVIDED) (ALREADY IN PLACE), PORT 14

CAT 5 CROSS CONNECT CABLE (SITE PROVIDED)

CISCO 7613 ROUTER (DISA PROVIDED) (ALREADY IN PLACE), (NODE 40)

CONFIG: RJ-45

INTERFACE: 10/100/1000BASE-TX, RJ-45 CONNECTOR, GIG-ETHERNET

(F)

UNIQUE INST FACT: PORT 9/2

Circuit 18

1.

PURPOSE: START 50MB NIPRNET SERVICE

50MB

OFFSITE CUSTOMER ROUTER, OFFSITE MSPP

CISCO-ONS-15454-MSPP (GFE) (DISA PROVIDED), NODE 40

INTERFACE CARD: CE-100T-8 8 PORT CARD FAST ETHERNET, SLOT 16/PORT 4

(B) INTERFACE: FAST ETHERNET, 10/100BASE-T, RJ-45 CONNECTOR

CABLE CROSS CONNECT, MAX 328 FT; TIA/EIA T568B, CAT 5

INTERFACE: 10/100/1000BASE-TX, RJ-45 CONNECTOR, ETHERNET

CISCO 7613 ROUTER (DISA-GFE), (NODE 40), PORT GI9/6

Circuit 19

1.

PURPOSE: START A 20MB NIPRNET SERVICE

20MB

ONSITE CUSTOMER PROVIDED ROUTER

INTER FACILITY SM FIBER

MEDIA CONVERTER (CUSTOMER PROVIDED)

CONFIG:

LINE SIDE: SC, SM FIBER

EQPT SIDE: RJ-45, CAT-6

INTERFACE: GIG-ETHERNET, 10/100/1000BASE-TX, RJ-45 CONNECTOR

TERM; 8W

CISCO 7613 ROUTER (DISA-GFE), (NODE 40), CONFIG: RJ-45

UNIQUE INST FACT: PORT 9/8

Circuit 20

1.

PURPOSE: UPDATE FOR CONFIGURATION CHANGES AT CUSTOMER SITE

OFFSITE ROUTER, OFFSITE MSPP

CISCO-ONS-15454-MSPP (GFE) (DISA CORE PROVIDED) NODE 40

(B) INTERFACE CARD: E100T-12 12 PORT CARD FAST ETHERNET, SLOT 14/PORT 2 (GFE)

INTERFACE: FAST ETHERNET, 10/100BASE-T, RJ-45 CONNECTOR

(D) TERM: 8W

CABLE CROSS CONNECT, MAX 328 FT; TIA/EIA T568B, CAT 5

CISCO 7613 ROUTER (GFE) (DISA PROVIDED); (NODE 40)

TERM: RJ45

INTERFACE: 10/100/1000BASE-TX, RJ-45 CONNECTOR, GIG-ETHERNET

(1) PORT GI9/7

Circuit 21

1.

PURPOSE: NIPR ACCESS CIRCUIT

OFFSITE CUSTOMER PROVIDED ROUTER, PROMINA-800 CIRCUIT

NET.COM PROMINA-800, PRC MODULE (GFE)

CONFIG: 1/536MB, DS0 PASS THROUGH

(B) PATCH PANEL (GFE)

CONFIG: B8ZS/ESF, 4W

CISCO 7507 ROUTER, DISA PROVIDED, (NODE 40)

(1) PORT S4/1/1

Circuit 22

1.

PURPOSE: UPDATE CIRCUIT DATA, UPDATE ROUTER INFORMATION TO INDICATE MODEL 7613

5.120MB

CISCO ROUTER 7613 (DISA PROVIDED), (NODE 40), PORT SE4/0/1

INTERFACE :

(A) CABLE CROSS CONNECT

(B) SERIAL INTERFACE SE4/0/1

(D) SUBNET MASK: N/A ; (PHYSICAL) DB-25 ; (ELECTRICAL) V.35

CABLE CROSS CONNECT; BLACK PATCH AND TEST

INTERFACE: RS-530

(A) 11 C NO SIG; (PHYSICAL) DB-25; (ELECTRICAL) V.35

PROMINA 800, HSD-2B CARD (GFE)

(B) INTERFACE:

(A) PROMINA 800

(B) FRONT CARD: HSD-2B

(C) REAR CARD: DCE: (PHYSICAL) DB-25; (ELECTRICAL) V.35

D. OFFSITE CUSTOMER PROVIDED ROUTER, PROMINA CIRCUIT