8. H92276-23-R-0029 Updated Solicitation.pdf

SEE ADDENDUM

(No Collect Calls)

H9227623R0029 25-Aug-2023

b. TELEPHONE NUMBER

324-379-9473

8. OFFER DUE DATE/LOCAL TIME

08:00 AM 11 Sep 2023

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W90UKT9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

TABUYAQONA, IRINIETA, T

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

W6MT SPECIAL OPS CMD AFRICA

ATTN SOCAFRICA PBO

UNIT 30401

APO AE 09046

APO AE 09107

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

311999

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF51

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

H9227623R0029

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Kenya Body Armor

FFP

The Contractor shall provide all personnel, equipment, tools, materials, vehicles, supervision, and services to deliver body armor to Nairobi, Kenya. The items, specification and quantities and delivery locations are further detailed on the subsequent Priced SLINS. This CLIN is for information only and no pricing information is required herein.

NET AMT

0001AA 270 Each Plate Carrier- NIJ Level IIIA protection

FFP

The contractor shall deliver Plate Carrier/Vest (Size: SMALL) NIJ Level IIIA protection. The plate carrier shall meet the following specifications: stop 8.1 g (125

gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s)15.6 g (240 gr) .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30 ft/s) :Level IIIA is the fourth level of protection, it should have the ability to also stop all rounds covered by lower levels of body armor (Level I, Level IIA, and Level II)

FOB: Destination

0001AB 675 Each Plate Carrier- NIJ Level IIIA protection

FFP

The contractor shall deliver Plate Carrier/Vest (Size: Medium) NIJ Level IIIA protection. The plate carrier shall meet the following specifications: stop 8.1 g (125

gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s)15.6 g (240 gr) .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30 ft/s) :Level IIIA is the fourth level of protection, it should have the ability to also stop all rounds covered by lower

0001AC 405 Each Plate Carrier- NIJ Level IIIA protection

FFP

The contractor shall deliver Plate Carrier/Vest (Size: Large) NIJ Level IIIA protection. The plate carrier shall meet the following specifications: stop 8.1 g (125

gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s)15.6 g (240 gr) .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30 ft/s) :Level IIIA is the fourth level of protection, it should have the ability to also stop all rounds covered by lower

0001AD 540 Each Level IV Hard Armor Plate

FFP

The contractor shall deliver Level IV Hard Armor Plate that would fit into the small Plate Carrier- NIJ Level IIIA protection supplied in 0001AA. The Level IV

Hard Armor Plate Shall meet or be superior to the following specifications: ESAPI or equivalent stops 3 shots of 147-grain (9.5 g) 7.62×51mm M80 ball bullets at a velocity of 2,750-foot-per-second (840 m/s) +50-foot-per-second (15 m/s) (V0).

0001AE 1,350 Each Level IV Hard Armor Plate

FFP

The contractor shall deliver Level IV Hard Armor Plate that would fit into the

Medium Plate Carrier- NIJ Level IIIA protection supplied in 0001AB. The Level

IV Hard Armor Plate Shall meet or be superior to the following specifications:

ESAPI or equivalent stops 3 shots of 147-grain (9.5 g) 7.62×51mm M80 ball bullets at a velocity of 2,750-foot-per-second (840 m/s) +50-foot-per-second (15 m/s) (V0).

0001AF 810 Each Level IV Hard Armor Plate

FFP

The contractor shall deliver Level IV Hard Armor Plate that would fit into the

Large Plate Carrier- NIJ Level IIIA protection supplied in 0001AC. The Level IV

Hard Armor Plate Shall meet or be superior to the following specifications: ESAPI or equivalent stops 3 shots of 147-grain (9.5 g) 7.62×51mm M80 ball bullets at a

0001AG 270 Each MICH Helmet, Mid- cut (Size: Small)

FFP

The contractor shall deliver MICH Helmet, Mid- cut. The MICH Helmet, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g (125 gr) .357 SIG FMJ

Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s).

Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum Semi Jacketed

Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30 ft/s).

0001AH 675 Each MICH Helmet, Mid- cut- (Size: Medium)

FFP

The contractor shall deliver MICH Helmet, Mid- cut. The MICH Helmet, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g (125 gr) .357 SIG FMJ

Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s).

Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum Semi Jacketed

0001AJ 405 Each MICH Helmet, Mid- cut (Size: Large)

FFP

The contractor shall deliver MICH Helmet, Mid- cut. The MICH Helmet, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g (125 gr) .357 SIG FMJ

Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s).

Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum Semi Jacketed

0001AK 1,350 Each MICH Helmet Cover , Mid- cut

FFP

The contractor shall deliver MICH Helmet Cover, Mid- cut. The MICH Helmet

Cover, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g

(125 gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s

(1470 ft/s ± 30 ft/s). Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum

Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30 ft/s).

0001AL 1 Lot Shipping

FFP

The contracting shall ship ALL ITEMS AND QUANTITIES stated in 0001AA through 0001AH in a single shipping lot. The contractor shall ensure that ALL

ITEMS AND QUANTITIES arrive at the specified location at the same time.

Separate shipment of items is not permitted. The shipping address is:

SENIOR STORES OFFICER

ATTN: Mr. Bill Wayne

KENYA ARMY ORDNANCE CORPS

KAHAWA BARRACKS THIKA ROAD

P.O BOX 30565 – 00100

NAIROBI KENYA

TELEPHONE: +254 203636401 EXT 6461

Cote d'Ivoire Body Armor

FFP

The Contractor shall provide all personnel, equipment, tools, materials, vehicles, supervision, and services to deliver body armor to Cote d'Ivoire . The items, specification and quantities and delivery locations are further detailed on the

0002AA 300 Each Plate Carrier- NIJ Level IIIA protection

FFP

The contractor shall deliver Plate Carrier/Vest (Size: SMALL) NIJ Level IIIA protection. The plate carrier shall meet the following specifications: stop 8.1 g (125

gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s)15.6 g (240 gr) .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30 ft/s) :Level IIIA is the fourth level of protection, it should have the ability to also stop all rounds covered by lower

0002AB 300 Each Plate Carrier- NIJ Level IIIA protection

FFP

The contractor shall deliver Plate Carrier/Vest (Size: Medium) NIJ Level IIIA protection. The plate carrier shall meet the following specifications: stop 8.1 g (125

gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s)15.6 g (240 gr) .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30 ft/s) :Level IIIA is the fourth level of protection, it should have the ability to also stop all rounds covered by lower

0002AC 750 Each Plate Carrier- NIJ Level IIIA protection

FFP

The contractor shall deliver Plate Carrier/Vest (Size: Large) NIJ Level IIIA protection. The plate carrier shall meet the following specifications: stop 8.1 g (125

gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s)15.6 g (240 gr) .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30 ft/s) :Level IIIA is the fourth level of protection, it should have the ability to also stop all rounds covered by lower

0002AD 600 Each Level IV Hard Armor Plate

FFP

The contractor shall deliver Level IV Hard Armor Plate that would fit into the small Plate Carrier- NIJ Level IIIA protection supplied in 0002AA. The Level IV

Hard Armor Plate Shall meet or be superior to the following specifications: ESAPI or equivalent stops 3 shots of 147-grain (9.5 g) 7.62×51mm M80 ball bullets at a

0002AE 600 Each Level IV Hard Armor Plate

FFP

The contractor shall deliver Level IV Hard Armor Plate that would fit into the

Medium Plate Carrier- NIJ Level IIIA protection supplied in 0002AB. The Level

IV Hard Armor Plate Shall meet or be superior to the following specifications:

ESAPI or equivalent stops 3 shots of 147-grain (9.5 g) 7.62×51mm M80 ball bullets at a velocity of 2,750-foot-per-second (840 m/s) +50-foot-per-second (15

0002AF 1,500 Each Level IV Hard Armor Plate

FFP

The contractor shall deliver Level IV Hard Armor Plate that would fit into the

Large Plate Carrier- NIJ Level IIIA protection supplied in 0002AC. The Level IV

Hard Armor Plate Shall meet or be superior to the following specifications: ESAPI or equivalent stops 3 shots of 147-grain (9.5 g) 7.62×51mm M80 ball bullets at a

0002AG 300 Each MICH Helmet, Mid- cut (Size: Small)

FFP

The contractor shall deliver MICH Helmet, Mid- cut. The MICH Helmet, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g (125 gr) .357 SIG FMJ

Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s).

Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum Semi Jacketed

0002AH 300 Each MICH Helmet, Mid- cut (Size: Medium)

FFP

The contractor shall deliver MICH Helmet, Mid- cut. The MICH Helmet, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g (125 gr) .357 SIG FMJ

Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s).

Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum Semi Jacketed

0002AJ 800 Each MICH Helmet, Mid- cut- (Size: Large)

FFP

The contractor shall deliver MICH Helmet, Mid- cut. The MICH Helmet, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g (125 gr) .357 SIG FMJ

Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s).

Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum Semi Jacketed

0002AK 1,350 Each MICH Helmet Cover , Mid- cut

FFP

The contractor shall deliver MICH Helmet Cover, Mid- cut. The MICH Helmet

Cover, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g

(125 gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s

(1470 ft/s ± 30 ft/s). Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum

Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30

0002AL 1 Lot Shipping

FFP

The contracting shall ship ALL ITEMS AND QUANTITIES stated in 0002AA through 0002AH in a single shipping lot. The contractor shall ensure that ALL

ITEMS AND QUANTITIES arrive at the specified location at the same time.

Separate shipment of items is not permitted. The shipping address is:

U.S. EMBASSY ABIDJAN

BP 730 Abidjan Cidex 03

Republic of Cote d'Ivoire

Benin Body Armor

FFP

The Contractor shall provide all personnel, equipment, tools, materials, vehicles, supervision, and services to deliver body armor to Benin. The items, specification and quantities and delivery locations are further detailed on the subsequent Priced

SLINS. This CLIN is for information only and no pricing information is required herein.

0003AA 300 Each Plate Carrier- NIJ Level IIIA protection

FFP

The contractor shall deliver Plate Carrier/Vest (Size: SMALL) NIJ Level IIIA protection. The plate carrier shall meet the following specifications: stop 8.1 g (125

gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s)15.6 g (240 gr) .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30 ft/s) :Level IIIA is the fourth level of protection, it should have the ability to also stop all rounds covered by lower

0003AB 300 Each Plate Carrier- NIJ Level IIIA protection

FFP

The contractor shall deliver Plate Carrier/Vest (Size: Medium) NIJ Level IIIA protection. The plate carrier shall meet the following specifications: stop 8.1 g (125

gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s)15.6 g (240 gr) .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30 ft/s) :Level IIIA is the fourth level of protection, it should have the ability to also stop all rounds covered by lower

0003AC 750 Each Plate Carrier- NIJ Level IIIA protection

FFP

The contractor shall deliver Plate Carrier/Vest (Size: Large) NIJ Level IIIA protection. The plate carrier shall meet the following specifications: stop 8.1 g (125

gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s)15.6 g (240 gr) .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30 ft/s) :Level IIIA is the fourth level of protection, it should have the ability to also stop all rounds covered by lower

0003AD 600 Each Level IV Hard Armor Plate

FFP

The contractor shall deliver Level IV Hard Armor Plate that would fit into the small Plate Carrier- NIJ Level IIIA protection supplied in 0003AA. The Level IV

Hard Armor Plate Shall meet or be superior to the following specifications: ESAPI or equivalent stops 3 shots of 147-grain (9.5 g) 7.62×51mm M80 ball bullets at a

0003AE 600 Each Level IV Hard Armor Plate

FFP

The contractor shall deliver Level IV Hard Armor Plate that would fit into the

Medium Plate Carrier- NIJ Level IIIA protection supplied in 0003AB. The Level

IV Hard Armor Plate Shall meet or be superior to the following specifications:

ESAPI or equivalent stops 3 shots of 147-grain (9.5 g) 7.62×51mm M80 ball bullets at a velocity of 2,750-foot-per-second (840 m/s) +50-foot-per-second (15

0003AF 1,500 Each Level IV Hard Armor Plate

FFP

The contractor shall deliver Level IV Hard Armor Plate that would fit into the

Large Plate Carrier- NIJ Level IIIA protection supplied in 0003AC. The Level IV

Hard Armor Plate Shall meet or be superior to the following specifications: ESAPI or equivalent stops 3 shots of 147-grain (9.5 g) 7.62×51mm M80 ball bullets at a

0003AG 300 Each MICH Helmet, Mid- cut (Size: Small)

FFP

The contractor shall deliver MICH Helmet, Mid- cut. The MICH Helmet, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g (125 gr) .357 SIG FMJ

Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s).

Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum Semi Jacketed

0003AH 300 Each MICH Helmet, Mid- (Size: Medium )

FFP

The contractor shall deliver MICH Helmet, Mid- cut. The MICH Helmet, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g (125 gr) .357 SIG FMJ

Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s).

Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum Semi Jacketed

0003AJ 750 Each MICH Helmet, Mid- cut (Size: Large )

FFP

The contractor shall deliver MICH Helmet, Mid- cut. The MICH Helmet, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g (125 gr) .357 SIG FMJ

Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s).

Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum Semi Jacketed

0003AK 1,350 Each MICH Helmet Cover , Mid- cut

FFP

The contractor shall deliver MICH Helmet Cover, Mid- cut. The MICH Helmet

Cover, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g

(125 gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s

(1470 ft/s ± 30 ft/s). Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum

Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30

0003AL 1 Lot Shipping

FFP

The contracting shall ship ALL ITEMS AND QUANTITIES stated in 0003AA through 0003AH in a single shipping lot. The contractor shall ensure that ALL

ITEMS AND QUANTITIES arrive at the specified location at the same time.

Separate shipment of items is not permitted. The shipping address is:

AMERICAN EMBASSY COTONOU

BLVD DE LA MARINA 01 P.O. BOX 2012

ATTN: OSC

TEL: 22997974752

COTONOU, BENIN

Togo Body Armor

FFP

The Contractor shall provide all personnel, equipment, tools, materials, vehicles, supervision, and services to deliver body armor to LOME, TOGO. The items, specification and quantities and delivery locations are further detailed on the

0004AA 300 Each Plate Carrier- NIJ Level IIIA protection

FFP

The contractor shall deliver Plate Carrier/Vest (Size: SMALL) NIJ Level IIIA protection. The plate carrier shall meet the following specifications: stop 8.1 g (125

gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s)15.6 g (240 gr) .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30 ft/s) :Level IIIA is the fourth level of protection, it should have the ability to also stop all rounds covered by lower

0004AB 300 Each Plate Carrier- NIJ Level IIIA protection

FFP

The contractor shall deliver Plate Carrier/Vest (Size: Medium) NIJ Level IIIA protection. The plate carrier shall meet the following specifications: stop 8.1 g (125

gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s)15.6 g (240 gr) .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30 ft/s) :Level IIIA is the fourth level of protection, it should have the ability to also stop all rounds covered by lower

0004AC 750 Each Plate Carrier- NIJ Level IIIA protection

FFP

The contractor shall deliver Plate Carrier/Vest (Size: Large) NIJ Level IIIA protection. The plate carrier shall meet the following specifications: stop 8.1 g (125

gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s)15.6 g (240 gr) .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30 ft/s) :Level IIIA is the fourth level of protection, it should have the ability to also stop all rounds covered by lower

0004AD 600 Each Level IV Hard Armor Plate

FFP

The contractor shall deliver Level IV Hard Armor Plate that would fit into the small Plate Carrier- NIJ Level IIIA protection supplied in 0004AA. The Level IV

Hard Armor Plate Shall meet or be superior to the following specifications: ESAPI or equivalent stops 3 shots of 147-grain (9.5 g) 7.62×51mm M80 ball bullets at a

0004AE 600 Each Level IV Hard Armor Plate

FFP

The contractor shall deliver Level IV Hard Armor Plate that would fit into the

Medium Plate Carrier- NIJ Level IIIA protection supplied in 0004AB. The Level

IV Hard Armor Plate Shall meet or be superior to the following specifications:

ESAPI or equivalent stops 3 shots of 147-grain (9.5 g) 7.62×51mm M80 ball bullets at a velocity of 2,750-foot-per-second (840 m/s) +50-foot-per-second (15

0004AF 1,500 Each Level IV Hard Armor Plate

FFP

The contractor shall deliver Level IV Hard Armor Plate that would fit into the

Large Plate Carrier- NIJ Level IIIA protection supplied in 0004AC. The Level IV

Hard Armor Plate Shall meet or be superior to the following specifications: ESAPI or equivalent stops 3 shots of 147-grain (9.5 g) 7.62×51mm M80 ball bullets at a

0004AG 300 Each MICH Helmet, Mid- cut - (Size: Small)

FFP

The contractor shall deliver MICH Helmet, Mid- cut. The MICH Helmet, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g (125 gr) .357 SIG FMJ

Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s).

Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum Semi Jacketed

0004AH 300 Each MICH Helmet, Mid- cut - (Size: Medium)

FFP

The contractor shall deliver MICH Helmet, Mid- cut. The MICH Helmet, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g (125 gr) .357 SIG FMJ

Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s).

Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum Semi Jacketed

0004AJ 750 Each MICH Helmet, Mid- cut - (Size: Large)

FFP

The contractor shall deliver MICH Helmet, Mid- cut. The MICH Helmet, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g (125 gr) .357 SIG FMJ

Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s).

Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum Semi Jacketed

0004AK 1,350 Each MICH Helmet Cover , Mid- cut

FFP

The contractor shall deliver MICH Helmet Cover, Mid- cut. The MICH Helmet

Cover, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g

(125 gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s

(1470 ft/s ± 30 ft/s). Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum

Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30

0004AL 1 Lot Shipping

FFP

The contracting shall ship ALL ITEMS AND QUANTITIES stated in 0004AA through 0004AH in a single shipping lot. The contractor shall ensure that ALL

ITEMS AND QUANTITIES arrive at the specified location at the same time.

Separate shipment of items is not permitted. The shipping address is:

EMBASSY OF THE UNITED STATES OF AMERICA

Attn: OSC

4332, BLVD EYADEMA, CITE OUA

BP: 852, LOME, TOGO

TEL: +228 22 61 54 70

SETAF Cote d'Ivoire Body Armor

FFP

The Contractor shall provide all personnel, equipment, tools, materials, vehicles, supervision, and services to deliver body armor to Cote d'Ivoire . The items, specification and quantities and delivery locations are further detailed on the

0005AA 1,200 Each Plate Carrier- NIJ Level IIIA protection

FFP

The contractor shall deliver Plate Carrier/Vest (Size: SMALL) NIJ Level IIIA protection. The plate carrier shall meet the following specifications: stop 8.1 g (125

gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s)15.6 g (240 gr) .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30 ft/s) :Level IIIA is the fourth level of protection, it should have the ability to also stop all rounds covered by lower

0005AB 1,200 Each Plate Carrier- NIJ Level IIIA protection

FFP

The contractor shall deliver Plate Carrier/Vest (Size: Medium) NIJ Level IIIA protection. The plate carrier shall meet the following specifications: stop 8.1 g (125

gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s)15.6 g (240 gr) .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30 ft/s) :Level IIIA is the fourth level of protection, it should have the ability to also stop all rounds covered by lower

0005AC 2,000 Each Plate Carrier- NIJ Level IIIA protection

FFP

The contractor shall deliver Plate Carrier/Vest (Size: Large) NIJ Level IIIA protection. The plate carrier shall meet the following specifications: stop 8.1 g (125

gr) .357 SIG FMJ Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s)15.6 g (240 gr) .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets at a velocity of 436 m/s (1430 ft/s ± 30 ft/s) :Level IIIA is the fourth level of protection, it should have the ability to also stop all rounds covered by lower

0005AD 2,400 Each Level IV Hard Armor Plate

FFP

The contractor shall deliver Level IV Hard Armor Plate that would fit into the small Plate Carrier- NIJ Level IIIA protection supplied in 0005AA. The Level IV

Hard Armor Plate Shall meet or be superior to the following specifications: ESAPI or equivalent stops 3 shots of 147-grain (9.5 g) 7.62×51mm M80 ball bullets at a

0005AE 2,400 Each Level IV Hard Armor Plate

FFP

The contractor shall deliver Level IV Hard Armor Plate that would fit into the

Medium Plate Carrier- NIJ Level IIIA protection supplied in 0005AB. The Level

IV Hard Armor Plate Shall meet or be superior to the following specifications:

ESAPI or equivalent stops 3 shots of 147-grain (9.5 g) 7.62×51mm M80 ball bullets at a velocity of 2,750-foot-per-second (840 m/s) +50-foot-per-second (15

0005AF 4,000 Each Level IV Hard Armor Plate

FFP

The contractor shall deliver Level IV Hard Armor Plate that would fit into the

Large Plate Carrier- NIJ Level IIIA protection supplied in 0005AC. The Level IV

Hard Armor Plate Shall meet or be superior to the following specifications: ESAPI or equivalent stops 3 shots of 147-grain (9.5 g) 7.62×51mm M80 ball bullets at a

0005AG 1,200 Each MICH Helmet, Mid- cut (Size: Small)

FFP

The contractor shall deliver MICH Helmet, Mid- cut. The MICH Helmet, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g (125 gr) .357 SIG FMJ

Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s).

Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum Semi Jacketed

0005AH 1,200 Each MICH Helmet, Mid- cut (Size: Medium )

FFP

The contractor shall deliver MICH Helmet, Mid- cut. The MICH Helmet, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g (125 gr) .357 SIG FMJ

Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s).

Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum Semi Jacketed

0005AJ 2,000 Each MICH Helmet, Mid- cut (Size: Large )

FFP

The contractor shall deliver MICH Helmet, Mid- cut. The MICH Helmet, Mid- cut shall meet or be superior to the following specifications requirement: Ballistic protection meets NIJ level IIIA or equivalent. Stops 8.1 g (125 gr) .357 SIG FMJ

Flat Nose (FN) bullets at a velocity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s).

Fragmentation Protection meets U.S. Mil Std 662F. Protection against fragments from V50 650 m/sec (17gr FSP) 15.6 g (240 gr) .44 Magnum Semi Jacketed

0005AK 1 Lot Shipping

FFP

The contracting shall ship ALL ITEMS AND QUANTITIES stated in 0005AA through 0005AG in a single shipping lot. The contractor shall ensure that ALL

ITEMS AND QUANTITIES arrive at the specified location at the same time.

Separate shipment of items is not permitted. The shipping address is:

U.S. EMBASSY ABIDJAN

BP 730 Abidjan Cidex 03

Republic of Cote d'Ivoire

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 N/A N/A N/A N/A

0001AA Destination Government Destination Government

0001AB Destination Government Destination Government

0001AC Destination Government Destination Government

0001AD Destination Government Destination Government

0001AE Destination Government Destination Government

0001AF Destination Government Destination Government

0001AG Destination Government Destination Government

0001AH Destination Government Destination Government

0001AJ Destination Government Destination Government

0001AK Destination Government Destination Government

0001AL Destination Government Destination Government

0002 N/A N/A N/A N/A

0002AA Destination Government Destination Government

0002AB Destination Government Destination Government

0002AC Destination Government Destination Government

0002AD Destination Government Destination Government

0002AE Destination Government Destination Government

0002AF Destination Government Destination Government

0002AG Destination Government Destination Government

0002AH Destination Government Destination Government

0002AJ Destination Government Destination Government

0002AK Destination Government Destination Government

0002AL Destination Government Destination Government

0003 N/A N/A N/A N/A

0003AA Destination Government Destination Government

0003AB Destination Government Destination Government

0003AC Destination Government Destination Government

0003AD Destination Government Destination Government

0003AE Destination Government Destination Government

0003AF Destination Government Destination Government

0003AG Destination Government Destination Government

0003AH Destination Government Destination Government

0003AJ Destination Government Destination Government

0003AK Destination Government Destination Government

0003AL Destination Government Destination Government

0004 N/A N/A N/A N/A

0004AA Destination Government Destination Government

0004AB Destination Government Destination Government

0004AC Destination Government Destination Government

0004AD Destination Government Destination Government

0004AE Destination Government Destination Government

0004AF Destination Government Destination Government

0004AG Destination Government Destination Government

0004AH Destination Government Destination Government

0004AJ Destination Government Destination Government

0004AK Destination Government Destination Government

0004AL Destination Government Destination Government

0005 N/A N/A N/A N/A

0005AA Destination Government Destination Government

0005AB Destination Government Destination Government

0005AC Destination Government Destination Government

0005AD Destination Government Destination Government

0005AE Destination Government Destination Government

0005AF Destination Government Destination Government

0005AG Destination Government Destination Government

0005AH Destination Government Destination Government

0005AJ Destination Government Destination Government

0005AK Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 N/A N/A N/A N/A

0001AA 90 dys. ADC 270 N/A

0001AB 90 dys. ADC 675 N/A

0001AC 90 hrs. ADC 405 N/A

0001AD 90 dys. ADC 540 N/A

0001AE 90 dys. ADC 1,350 N/A

0001AF 90 dys. ADC 810 N/A

0001AG 90 dys. ADC 270 N/A

0001AH 90 dys. ADC 675 N/A

0001AJ 90 dys. ADC 405 N/A

0001AK 90 dys. ADC 1,350 N/A

0001AL 90 dys. ADC 1 N/A

0002 N/A N/A N/A N/A

0002AA 120 dys. ADC 300 N/A

0002AB 120 dys. ADC 300 N/A

0002AC 120 dys. ADC 750 N/A

0002AD 120 dys. ADC 600 N/A

0002AE 120 dys. ADC 600 N/A

0002AF 120 dys. ADC 1,500 N/A

0002AG 120 dys. ADC 300 N/A

0002AH 120 dys. ADC 300 N/A

0002AJ 120 dys. ADC 800 N/A

0002AK 120 dys. ADC 1,350 N/A

0002AL 120 hrs. ADC 1 N/A

0003 N/A N/A N/A N/A

0003AA 150 dys. ADC 300 N/A

0003AB 150 dys. ADC 300 N/A

0003AC 150 dys. ADC 750 N/A

0003AD 150 dys. ADC 600 N/A

0003AE 150 dys. ADC 600 N/A

0003AF 150 dys. ADC 1,500 N/A

0003AG 150 dys. ADC 300 N/A

0003AH 150 dys. ADC 300 N/A

0003AJ 150 dys. ADC 750 N/A

0003AK 150 dys. ADC 1,350 N/A

0003AL 150 dys. ADC 1 N/A

0004 N/A N/A N/A N/A

0004AA 180 dys. ADC 300 N/A

0004AB 180 dys. ADC 300 N/A

0004AC 180 dys. ADC 750 N/A

0004AD 180 dys. ADC 600 N/A

0004AE 180 dys. ADC 600 N/A

0004AF 180 dys. ADC 1,500 N/A

0004AG 180 dys. ADC 300 N/A

0004AH 180 dys. ADC 300 N/A

0004AJ 180 dys. ADC 750 N/A

0004AK 180 dys. ADC 1,350 N/A

0004AL 180 dys. ADC 1 N/A

0005 N/A N/A N/A N/A

0005AA 280 dys. ADC 1,200 N/A

0005AB 280 dys. ADC 1,200 N/A

0005AC 280 dys. ADC 2,000 N/A

0005AD 280 dys. ADC 2,400 N/A

0005AE 280 dys. ADC 2,400 N/A

0005AF 280 dys. ADC 4,000 N/A

0005AG 280 dys. ADC 1,200 N/A

0005AH 280 dys. ADC 1,200 N/A

0005AJ 280 dys. ADC 2,000 N/A

0005AK 280 dys. ADC 1 N/A

CLAUSES INCORPORATED BY REFERENCE

52.202-1 Definitions JUN 2020

52.203-3 Gratuities APR 1984

52.203-5 Covenant Against Contingent Fees MAY 2014

52.203-6 Restrictions On Subcontractor Sales To The Government JUN 2020

52.203-7 Anti-Kickback Procedures JUN 2020

52.203-12 Limitation On Payments To Influence Certain Federal

Transactions

JUN 2020

52.203-16 Preventing Personal Conflicts of Interest JUN 2020

52.203-18 Prohibition on Contracting With Entities That Require Certain

Internal Confidentiality Agreements or Statements--

Representation

JAN 2017

52.203-19 Prohibition on Requiring Certain Internal Confidentiality

Agreements or Statements

JAN 2017

52.204-6 Unique Entity Identifier OCT 2016

52.204-7 System for Award Management OCT 2018

52.204-10 Reporting Executive Compensation and First-Tier

Subcontract Awards

JUN 2020

52.204-13 System for Award Management Maintenance OCT 2018

52.204-16 Commercial and Government Entity Code Reporting AUG 2020

52.204-18 Commercial and Government Entity Code Maintenance AUG 2020

52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-23 Prohibition on Contracting for Hardware, Software, and

Services Developed or Provided by Kaspersky Lab and Other

Covered Entities

NOV 2021

52.204-24 Representation Regarding Certain Telecommunications and

Video Surveillance Services or Equipment

NOV 2021

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

NOV 2021

52.204-26 Covered Telecommunications Equipment or Services--

Representation.

OCT 2020

52.204-27 Prohibition on a ByteDance Covered Application JUN 2023

52.209-2 Prohibition on Contracting with Inverted Domestic

Corporations--Representation

NOV 2015

52.209-7 Information Regarding Responsibility Matters OCT 2018

52.209-10 Prohibition on Contracting With Inverted Domestic

Corporations

NOV 2015

52.210-1 Market Research NOV 2021

52.211-16 Variation In Quantity APR 1984

52.212-3 Offeror Representations and Certifications--Commercial

Products and Commercial Services

DEC 2022

52.212-4 Contract Terms and Conditions--Commercial Products and

Commercial Services

DEC 2022

52.222-10 Compliance with Copeland Act Requirements FEB 1988

52.222-11 Subcontracts (Labor Standards) MAY 2014

52.222-12 Contract Termination-Debarment MAY 2014

52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

JUN 2020

52.223-19 Compliance with Environmental Management Systems MAY 2011

52.224-1 Privacy Act Notification APR 1984

52.225-13 Restrictions on Certain Foreign Purchases FEB 2021

52.225-19 Contractor Personnel in a Designated Operational Area or

Supporting a Diplomatic or Consular Mission Outside the

United States

MAY 2020

52.232-1 Payments APR 1984

52.232-8 Discounts For Prompt Payment FEB 2002

52.232-11 Extras APR 1984

52.232-18 Availability Of Funds APR 1984

52.232-33 Payment by Electronic Funds Transfer--System for Award

Management

OCT 2018

52.232-38 Submission of Electronic Funds Transfer Information with

Offer

JUL 2013

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

MAR 2023

52.233-1 Disputes MAY 2014

52.233-3 Protest After Award AUG 1996

52.233-4 Applicable Law for Breach of Contract Claim OCT 2004

52.242-13 Bankruptcy JUL 1995

52.242-14 Suspension of Work APR 1984

52.242-15 Stop-Work Order AUG 1989

52.242-17 Government Delay Of Work APR 1984

52.246-2 Alt I Inspection Of Supplies Fixed Price (Aug 1996) - Alternate I JUL 1985

52.246-16 Responsibility For Supplies APR 1984

52.246-17 Warranty Of Supplies Of A Noncomplex Nature JUN 2003

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022

252.203-7005 Representation Relating to Compensation of Former DoD

Officials

SEP 2022

252.204-7003 Control Of Government Personnel Work Product APR 1992

252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

JAN 2023

252.204-7015 Notice of Authorized Disclosure of Information for Litigation

Support

JAN 2023

252.204-7016 Covered Defense Telecommunications Equipment or Services

-- Representation

DEC 2019

252.204-7017 Prohibition on the Acquisition of Covered Defense

Telecommunications Equipment or Services -- Representation

MAY 2021

252.204-7018 Prohibition on the Acquisition of Covered Defense

Telecommunications Equipment or Services

JAN 2023

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements MAR 2022

252.204-7020 NIST SP 800-171 DoD Assessment Requirements JAN 2023

252.204-7021 Contractor Compliance with the Cybersecurity Maturity

Model Certification Level Requirement

JAN 2023

252.205-7000 Provision Of Information To Cooperative Agreement Holders JUN 2023

252.223-7004 Drug Free Work Force SEP 1988

252.223-7008 Prohibition of Hexavalent Chromium JAN 2023

252.225-7005 Identification Of Expenditures In The United States JUN 2005

252.225-7012 Preference For Certain Domestic Commodities APR 2022

252.225-7015 Restriction on Acquisition of Hand Or Measuring Tools JUN 2005

252.225-7031 Secondary Arab Boycott Of Israel JUN 2005

252.225-7040 Contractor Personnel Supporting U.S. Armed Forces

Deployed Outside the United States

OCT 2015

252.225-7043 Antiterrorism/Force Protection Policy for Defense

Contractors Outside the United States

JUN 2015

252.225-7048 Export-Controlled Items JUN 2013

252.225-7051 Prohibition on Acquisition of Certain Foreign Commercial

Satellite Services.

DEC 2022

252.225-7055 Representation Regarding Business Operations with the

Maduro Regime

MAY 2022

252.225-7056 Prohibition Regarding Business Operations with the Maduro

Regime

JAN 2023

252.225-7059 Prohibition on Certain Procurements from the Xinjiang

Uyghur Autonomous Region - Representation

JUN 2023

252.225-7060 Prohibition on Certain Procurements from the Xinjiang

Uyghur Autonomous Region

JUN 2023

252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic

Enterprises, and Native Hawaiian Small Business Concerns

JAN 2023

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7006 Wide Area WorkFlow Payment Instructions JAN 2023

252.232-7008 Assignment of Claims (Overseas) JUN 1997

252.232-7010 Levies on Contract Payments DEC 2006

252.232-7011 Payments in Support of Emergencies and Contingency

Operations

MAY 2013

252.237-7010 Prohibition on Interrogation of Detainees by Contractor

Personnel

JAN 2023

252.237-7019 Training for Contractor Personnel Interacting with Detainees JAN 2023

252.239-7010 Cloud Computing Services JAN 2023

252.239-7018 Supply Chain Risk DEC 2022

252.243-7002 Requests for Equitable Adjustment DEC 2022

252.244-7000 Subcontracts for Commercial Products or Commercial

Services

JAN 2023

252.244-7000 Subcontracts for Commercial Products or Commercial

Services

JAN 2023

252.246-7008 Sources of Electronic Parts JAN 2023

252.247-7023 Transportation of Supplies by Sea JAN 2023

CLAUSES INCORPORATED BY FULL TEXT

52.204-1 APPROVAL OF CONTRACT (DEC 1989)

This contract is subject to the written approval of the designated Contracting Officer at SOCAFRICA J42 and shall not be binding until so approved.

(End of clause)

52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

(MAR 2023)

Addendum to FAR 52.212-1 Instructions to Offerors

Addendum to 52.212-1(c), Period for Acceptance of Offers. The paragraph is tailored as follows: The offeror agrees to hold the prices in its offer firm for 90 calendar days from the date specified for receipt of offers.

To assure timely and equitable evaluation of proposals, offerors must follow the instructions contained herein. Offerors are required to meet all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements. Failure to meet a requirement may result in an offer being ineligible for award. Offerors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale.

Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show:

1. The solicitation number;

2. The time specified in the solicitation for receipt of offers;

3. The name, address, and telephone number of the offeror;

4. A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

5. Terms of any express warranty;

6. Price and any discount terms;

7. "Remit to" address, if different than mailing address;

8. A completed copy of the representations and certifications at Federal Acquisition Regulation

(FAR) 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically);

9. Acknowledgment of Solicitation Amendments;

10. Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and

11. If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

Specific Instructions

PART I: PRICE PROPOSAL – Submit an original and one copy

a. Complete blocks 12, 17a, 30a, b and c of the SF1449. In doing so, the offeror accedes to the contract terms and conditions as written in the RFP, with attachments.

These sections constitute the model contract.

b. Insert proposed unit prices in Section B for each Contract Line Item Number

(CLIN) or SubClin (SCLIN), including all option periods. The extended amount must equal the whole dollar unit price multiplied by the number of units.

c. Complete the necessary fill-ins and certifications in Provisions. Provision

52.212-3 shall be returned in its entirety.

https://www.gsa.gov/forms-library/solicitationcontractorder-commercial-items https://www.acquisition.gov/far/52.212-3#FAR_52_212_3 https://www.acquisition.gov/far/52.212-3#FAR_52_212_3 https://www.gsa.gov/forms-library/solicitationcontractorder-commercial-items

PART II: PAST PERFORMANCE. Limited to no more than 1 page per contract listed. Only references for same or similar type contract desired. Offeror may submit documents that demonstrate record of successfully performing similar contracts, including the quality of performance, adherence to schedules, and customer satisfaction. Offerors will provide references and relevant contract information.

PART III: TECHNICAL CAPABILITIES.

a. Item Qualifications Certification: The Offeror will submit documentation validating the items required (Plate carrier, plates, helmet and helmet covers) meet relevant standards as outlined in NIJ Standard 0101.06, NIJ Standard 0108.01 or equivalent.

b. Technical Approach: The Offeror will submit documentation describing/verifying the manufacturing, production capabilities and stock level availability to meet the required quantities.

c. Delivery Schedule & Logistics: The offeror shall provide a schedule narrative document/ chart /diagram that demonstrates efficient and logical sequencing of item delivery to different locations, long lead item submissions/procurement, and execution shipment to meet the timelines and requirements of this solicitation, including the phased shipping/delivery requirements

(End of provision)

52.212-2 EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)

Addendum to FAR 52.212-2: Evaluation—Commercial Products and Commercial Services

The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation requirements pursuant to FAR 52.212-1 and shall be the most advantageous and provided best value to the Government, price and other non-price factors considered.

BASIS FOR CONTRACT AWARD: This acquisition will utilize the Lowest Price Technically

Acceptable (LPTA) to make an integrated assessment for a best value award decision. By submission of its offer an in accordance with the instructions provided in clause FAR 52.212-1, Instruction to Offerors, the offeror accedes to the terms of this contract, and all such offers shall be treated equally except for their prices and technical narratives. Failure to meet a requirement may result in an offer being determined unacceptable. Offerors must clearly identify any exception to the solicitation terms and conditions and provide a complete accompanying rationale. The evaluation process shall proceed as follows:

I: Price

II: Technical Acceptability of Non-Price Factors

Price Evaluation: Initially, the government will review the Offerors proposed price. The offeror's proposed prices will be determined by the Contracting Officer by multiplying the quantities identified in

Section B by the proposed unit price for each Contract Line-Item Number to confirm the extended amount for each. If there is any difference between the offeror’s total price submitted in the proposal and the total price computed by the contracting…