Draft Solicitation 100407.pdf

CODE

(Hour)

PAGE(S)

until 01:00 PM local time 20 May 2010

X

A X B

C X D

E X X

G F 93 - 97

98 - 104 X H 105 - 109

RATING PAGE OF PAGES

7. ISSUED BY

(Date)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

Previous Edition is Unusable 33-134 STANDARD FORM 33 (REV. 9-97)

Prescribed by GSA FAR (48 CFR) 53.214(c)

1 109

(If other than Item 7)

15A. NAME 16. NAME AND TITLE OF PERSON AUTHORIZED TO

AND

ADDRESS SIGN OFFER (Type or print)

OF

OFFEROR

AMENDMENT NO. DATE

15B. TELEPHONE NO (Include area code) 17. SIGNATURE 15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

18. OFFER DATE

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

2. CONTRACT NO.

H92222 8. ADDRESS OFFER TO

See Item 7

9. Sealed offers in original and 1 copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if handcarried, in the depository located in

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all

SEE BLOCK #7

terms and conditions contained in this solicitation.

10. FOR INFORMATION

CALL:

A. NAME (NO COLLECT CALLS)

11. TABLE OF CONTENTS

SOLICITATION/ CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/ COSTS

2 - 55

X I CONTRACT CLAUSES

DESCRIPTION/ SPECS./ WORK STATEMENT X

PACKAGING AND MARKING 56 - 62

J LIST OF ATTACHMENTS

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

63 - 68 X K REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

CONTRACT ADMINISTRATION DATA 69 - 71 X

SPECIAL CONTRACT REQUIREMENTS

OFFER (Must be fully completed by offeror) 72 - 75 X M

L INSTRS., CONDS., AND NOTICES TO OFFERORS

EVALUATION FACTORS FOR AWARD

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments

AMENDMENT NO. DATE

to the SOLICITATION for offerors and related documents numbered and dated):

FACILITY

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period

SOLICITATION, OFFER AND AWARD

X

(X) SEC. DESCRIPTION (X) SEC. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA 28. AWARD DATE

EMAIL: TEL: (Signature of Contracting Officer)

CODE CODE

B. TELEPHONE (Include area code) C. E-MAIL ADDRESS

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

23. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

PART IV - REPRESENTATIONS AND INSTRUCTIONS

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

76 - 91

PART II - CONTRACT CLAUSES

HQ USSOCOM SORDAC-K

ATTN: LEATRICE FREDERICK

7701 TAMPA POINT BLVD

MACDILL AFB FL 33621 813-826-6513

813-826-7504 FAX:

TEL:

FAX:

TEL:

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

6. REQUISITION/PURCHASE NO. 5. DATE ISSUED

20 Apr 2010

4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

[ X ]

3. SOLICITATION NO.

H92222-10-R-0018

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES MAX

QUANTITY

UNIT UNIT PRICE MAX AMOUNT

0001 3 Each TCCC CASEVAC PDM's

FFP

Tactical Combat Casualty Care (TCCC) Casualty Evacuation (CASEVAC) Set Product Demonstration Models (PDM's), IAW contractor's proposed Statement of Work (SOW), based on the Statement of Objectives (SOO), Contractor shall provide TCCC CASEVAC Set, which includes four component Kits: Casualty Extraction Kit, Casualty Mobility Kit, Casualty Transport Kit and Casualty Sustainment Kit.

Period of performance from award date Not to exceed August 2011

FOB: Destination

MAX

NET AMT

UNIT UNIT PRICE MAX AMOUNT

0002 3 Each Casualty Extraction Kit Refurbishment

FFP

Replenishment/Refurbishment: During testing and employment of the Casualty Evacuation Kit, much of the equipment will be consumed, fail or break during the testing events and will require replenishment prior to the next test phase. IAW the Statement of Objectives (SOO), the Government will return each Kit to the contractor for refurbishment and replacement of consumables, and replacement of failed/broken items. Costs for return of the Kit and delivery of replenished/refurbished Casualty Evacuation Kits is included in this CLIN.

CLIN shall be utilized as needed for the duration of the contract base period.

UNIT UNIT PRICE MAX AMOUNT

0003 3 Each Casualty Mobility Kit Refurbishment

FFP

Replenishment/Refurbishment: During testing of the Casualty Mobility Kit, much of the equipment will be consumed, fail or break during the testing events and will require replenishment prior to the next test phase. IAW the Statement of Objectives (SOO), the Government will return each Kit to the contractor for refurbishment and replacement of consumables, and replacement of failed/broken items. Costs for return of the Kit and delivery of replenished/refurbished Casualty Mobility Kits is included in this CLIN.

CLIN shall be utilized as needed for the duration of the contract base period.

UNIT UNIT PRICE MAX AMOUNT

0004 3 Each Casualty Transport Kit Refurbishment

FFP

Replenishment/Refurbishment: During testing of the Casualty Transport Kit, much of the equipment will be consumed, fail or break during the testing events and will require replenishment prior to the next test phase. IAW the Statement of Objectives (SOO), the Government will return each Kit to the contractor for refurbishment and replacement of consumables, and replacement of failed/broken items. Costs for return of the Kit and delivery of replenished/refurbished Casualty Transport Kits is included in this CLIN.

CLIN shall be utilized as needed for the duration of the contract base period.

UNIT UNIT PRICE MAX AMOUNT

0005 3 Each Casualty Sustainment Kit Refurbishment

FFP

Replenishment/Refurbishment: During testing of the Casualty Sustainment Kit, much of the equipment will be consumed, fail or break during the testing events and will require replenishment prior to the next test phase. IAW the Statement of Objectives (SOO), the Government will return each Kit to the contractor for refurbishment and replacement of consumables, and replacement of failed/broken items. Costs for return of the Kit and delivery of replenished/refurbished Casualty Sustainment Kits is included in this CLIN.

CLIN shall be utilized as needed for the duration of the contract base period.

UNIT UNIT PRICE MAX AMOUNT

0006 4 Days $960.00 $3,000.00 Field Representation

FFP

IAW the contractor’s proposed SOW in response to the SOO, the contractor will provide qualified field representation for initial kit instruction and training, calibration of equipment, field assesment and related guidance. The Field Representation CLIN is assigned a predetermined not to exceed (NTE) dollar amount.

$3,000.00

UNIT MAX AMOUNT

0007 UNDEFINED Lot $90,000.00 Travel

COST

All travel shall be conducted in accordance with the Joint Travel Regulation (JTR). The Travel CLIN is assigned a predetermined not to exceed (NTE) dollar amount.

MAX COST $90,000.00

UNIT MAX AMOUNT

0008 1 Job

ECP

FFP

Engineering Change Proposal's may be executed any time within the performance period after Government review and approval. The ECP CLIN is assigned a predetermined not to exceed (NTE) dollar amount.

$100,000.00

$100,000.00

UNIT UNIT PRICE MAX AMOUNT

0009 UNDEFINED Each (NSP) Techincal Data

FFP

Contract Data Requirements List (CDRLs), DD Form 1423 CDRLs are not seperately priced (NSP)

UNIT UNIT PRICE MAX AMOUNT

1001 28 Each

OPTION TCCC CASEVAC

FFP

Contractor shall provide Tactical Combat Casualty Care (TCCC) Casualty Evacuation (CASEVAC) Set, IAW the Statement of Work (SOW) and Performance Specification, which includes four component Kits: Casualty Extraction Kit, Casualty Mobility Kit, Casualty Transport Kit and Casualty Sustainment Kit.

Ordering Period One

UNIT UNIT PRICE MAX AMOUNT

1002 84 Each OPTION Casualty Extraction Kit

FFP

Contractor shall provide the Casualty Evacuation Kit, IAW the Statement of Work (SOW) and Performance Specification, which includes three modules: Casualty Extraction Module 1 (E-1), Casualty Extraction Module 2 (E-2), and Casualty Extraction Module 3 (E-3).

Ordering Period One.

UNIT UNIT PRICE MAX AMOUNT

1003 436 Each OPTION Casualty Extraction Module 1 (E-1)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Evacuation Module (E-1), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

1004 436 Each OPTION Casualty Extraction Module 2 (E-2)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Evacuation Module (E-2), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

1005 436 Each OPTION Casualty Extraction Module 3 (E-3)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Evacuation Module (E-3), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

1006 267 Each OPTION Casualty Mobility Kit

FFP

Contractor shall provide the Casualty Mobility Kit, IAW the Statement of Work (SOW) and Performance Specification, which includes two modules: Casualty Mobility Module 1 (M-1), and Casualty Mobility Module 2 (M-2).

UNIT UNIT PRICE MAX AMOUNT

1007 1,262 Each OPTION Casualty Mobility Module 1 (M-1)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Mobility Module (M-1), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

1008 1,262 Each OPTION Casualty Mobility Module 2 (M-2)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Mobility Module (M-2), IAW the Statement of Work (SOW) and Performance Specification.

1009 UNDEFINED

OPTION Casualty Transport Kit

FFP

Contractor shall provide the Casualty Transport Kit, IAW the Statement of Work (SOW) and Performance Specification, which includes six Modules: Casualty Transport Module 1 (T-1), Casualty Transport Module 2 (T-2), Casualty Transport Module 3 (T-3), Casualty Transport Module 4 (T-4), Casualty Transport Module 5 (T-5), and Casualty Transport Module 6 (T-6).

UNIT UNIT PRICE MAX AMOUNT

1010 81 Each OPTION Casualty Transport Module 1 (T-1)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-1), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

1011 81 Each OPTION Casualty Transport Module 2 (T-2)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-2), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

1012 81 Each OPTION Casualty Transport Module 3 (T-3)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-3), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

1013 81 Each OPTION Casualty Transport Module 4 (T-4)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-4), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

1014 81 Each OPTION Casualty Transport Module 5 (T-5)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-5), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

1015 81 Each OPTION CasualtyTransport Module 6 (T-6)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-6), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

1016 47 Each OPTION Casualty Sustainment Kit

FFP

Contractor shall provide the Casualty Sustainment Kit, IAW the Statement of Work (SOW) and Performance Specification, which includes two Modules:

Casualty Sustainment Module 1 (S-1),and Casualty Sustainment Module 2 (S-2).

UNIT UNIT PRICE MAX AMOUNT

1017 182 Each OPTION Casualty Sustainment Module 1 (S-1)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Sustainment Module (S-1), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

1018 182 Each OPTION Casualty Sustainment Module 2 (S-2)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Sustainment Module (S-2), IAW the Statement of Work (SOW) and Performance Specification.

UNIT MAX AMOUNT

1019 1 Lot $80,000.00 OPTION Field Representation

FFP

IAW the SOW, the contractor will provide qualified field representation for kit instruction and training, calibration of equipment, field assesment and related guidance. The Field Representation CLIN is assigned a predetermined not to exceed (NTE) dollar amount.

Maximum amount is for the life of the contract.

$80,000.00

UNIT MAX AMOUNT

1020 UNDEFINED Lot $45,000.00 OPTION Travel

COST

All travel shall be conducted in accordance with the Joint Travel Regulation (JTR). The Travel CLIN is assigned a predetermined not to exceed (NTE) dollar amount for the life of the contract.

Maximum amount is for the life of the contract.

$45,000.00

UNIT MAX AMOUNT

1021 1 Lot $1,000,000.00

OPTION ECP

FFP

Engineering Change Proposal's may be executed any time within the performance period after Government review and approval. The ECP CLIN is assigned a predetermined not to exceed (NTE) dollar amount.

Maximum amount is for the life of the contract.

Ordering Period One

$1,000,000.00

UNIT MAX AMOUNT

1022 1 Lot $5,900,000.00 OPTION Provisioned Items Order

FFP

The government may procure spare parts via delivery orders with pre-negotiated pricing. The PIO CLIN is assigned a predetermined not to exceed (NTE) dollar amount.

Maximum amount is for the life of the contract.

$5,900,000.00

UNIT MAX AMOUNT

1023 UNDEFINED Each (NSP) OPTION Techincal Data

FFP

Contract Data Requirements List (CDRLs), DD Form 1423 CDRLs are not seperately priced (NSP)

UNIT UNIT PRICE MAX AMOUNT

2001 UNDEFINED Each

OPTION TCCC CASEVAC

FFP

Contractor shall provide Tactical Combat Casualty Care (TCCC) Casualty Evacuation (CASEVAC) Set, IAW the Statement of Work (SOW) and Performance Specification, which includes four component Kits: Casualty Extraction Kit, Casualty Mobility Kit, Casualty Transport Kit and Casualty Sustainment Kit.

Ordering Period Two

UNIT UNIT PRICE MAX AMOUNT

2002 UNDEFINED Each OPTION Casualty Extraction Kit

FFP

Contractor shall provide the Casualty Evacuation Kit, IAW the Statement of Work (SOW) and Performance Specification, which includes three modules: Casualty Extraction Module 1 (E-1), Casualty Extraction Module 2 (E-2), and Casualty Extraction Module 3 (E-3).

UNIT UNIT PRICE MAX AMOUNT

2003 UNDEFINED Each OPTION Extraction Module 1 (E-1)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Evacuation Module (E-1), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

2004 UNDEFINED Each OPTION Extraction Module 2 (E-2)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Evacuation Module (E-2), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

2005 UNDEFINED Each OPTION Extraction Module 3 (E-3)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Evacuation Module (E-3), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

2006 UNDEFINED Each OPTION Casualty Mobility Kit

FFP

Contractor shall provide the Casualty Mobility Kit, IAW the Statement of Work (SOW) and Performance Specification, which includes two modules: Casualty Mobility Module 1 (M-1), and Casualty Mobility Module 2 (M-2).

UNIT UNIT PRICE MAX AMOUNT

2007 UNDEFINED Each OPTION Mobility Module 1 (M-1)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Mobility Module (M-1), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

2008 UNDEFINED Each OPTION Casualty Mobility Module 2 (M-2)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Mobility Module (M-2), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

2009 UNDEFINED Each OPTION Casualty Transport Kit

FFP

Contractor shall provide the Casualty Transport Kit, IAW the Statement of Work (SOW) and Performance Specification, which includes six Modules: Casualty Transport Module 1 (T-1), Casualty Transport Module 2 (T-2), Casualty Transport Module 3 (T-3), Casualty Transport Module 4 (T-4), Casualty Transport Module 5 (T-5), and Casualty Transport Module 6 (T-6).

UNIT UNIT PRICE MAX AMOUNT

2010 UNDEFINED Each OPTION Casualty Transport Module 1 (T-1)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-1), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

2011 UNDEFINED Each OPTION Casualty Transport Module 2 (T-2)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-2), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

2012 UNDEFINED Each OPTION Casualty Transport Module 3 (T-3)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-3), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

2013 UNDEFINED Each OPTION Casualty Transport Module 4 (T-4)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-4), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

2014 UNDEFINED Each OPTION Casualty Transport Module 5 (T-5)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-5), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

2015 UNDEFINED Each OPTION Casualty Transport Module 6 (T-6)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-6), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

2016 UNDEFINED Each OPTION Casualty Sustainment Kit

FFP

Contractor shall provide the Casualty Sustainment Kit, IAW the Statement of Work (SOW) and Performance Specification, which includes two modules:

Casualty Sustainment Module 1 (S-1),and Casualty Sustainment Module 2 (S-2).

UNIT UNIT PRICE MAX AMOUNT

2017 UNDEFINED Each OPTION Casualty Sustainment Module 1 (S-1)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Sustainment Module (S-1), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

2018 UNDEFINED Each OPTION Casualty Sustainment Module 2 (S-2)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Sustainment Module (S-2), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

2019 UNDEFINED Hours OPTION Field Representation

FFP

IAW the SOW, the contractor will provide qualified field representation for kit instruction and training, calibration of equipment, field assesment and related guidance. The Field Representation CLIN is assigned a predetermined not to exceed (NTE) dollar amount.

UNIT UNIT PRICE MAX AMOUNT

2020 UNDEFINED Lot OPTION Travel

FFP

All travel shall be conducted in accordance with the Joint Travel Regulation (JTR). The Travel CLIN is assigned a predetermined not to exceed (NTE) dollar amount for the life of the contract.

UNIT UNIT PRICE MAX AMOUNT

2021 UNDEFINED Job

OPTION ECP

FFP

Engineering Change Proposal's may be executed any time within the performance period after Government review and approval. The ECP CLIN is assigned a predetermined not to exceed (NTE) dollar amount.

UNIT UNIT PRICE MAX AMOUNT

2022 UNDEFINED Lot OPTION Provisioned Items Order (PIO)

FFP

The government may procure spare parts via delivery orders with pre-negotiated pricing. The PIO CLIN is assigned a predetermined not to exceed (NTE) dollar amount.

UNIT UNIT PRICE MAX AMOUNT

2023 UNDEFINED Each OPTION Techincal Data

FFP

Contract Data Requirements List (CDRLs), DD Form 1423 CDRLs are not seperately priced (NSP)

UNIT UNIT PRICE MAX AMOUNT

3001 UNDEFINED Each

OPTION TCCC CASEVAC

FFP

Contractor shall provide Tactical Combat Casualty Care (TCCC) Casualty Evacuation (CASEVAC) Set, IAW the Statement of Work (SOW) and Performance Specification, which includes four component Kits: Casualty Extraction Kit, Casualty Mobility Kit, Casualty Transport Kit and Casualty Sustainment Kit.

Ordering Period Three

UNIT UNIT PRICE MAX AMOUNT

3002 UNDEFINED Each OPTION Casualty Extraction Kit

FFP

Contractor shall provide the Casualty Evacuation Kit, IAW the Statement of Work (SOW) and Performance Specification, which includes three modules: Casualty Extraction Module 1 (E-1), Casualty Extraction Module 2 (E-2), and Casualty Extraction Module 3 (E-3).

UNIT UNIT PRICE MAX AMOUNT

3003 UNDEFINED Each OPTION Extraction Module 1 (E-1)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Evacuation Module (E-1), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

3004 UNDEFINED Each OPTION Extraction Module 2 (E-2)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Evacuation Module (E-2), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

3005 UNDEFINED Each OPTION Extraction Module 3 (E-3)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Evacuation Module (E-3), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

3006 UNDEFINED Each OPTION Casualty Mobility Kit

FFP

Contractor shall provide the Casualty Mobility Kit, IAW the Statement of Work (SOW) and Performance Specification, which includes two modules: Casualty Mobility Module 1 (M-1), and Casualty Mobility Module 2 (M-2).

UNIT UNIT PRICE MAX AMOUNT

3007 UNDEFINED Each OPTION Mobility Module 1 (M-1)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Mobility Module (M-1), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

3008 UNDEFINED Each OPTION Casualty Mobility Module 2 (M-2)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Mobility Module (M-2), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

3009 UNDEFINED Each OPTION Casualty Transport Kit

FFP

Contractor shall provide the Casualty Transport Kit, IAW the Statement of Work (SOW) and Performance Specification, which includes six Modules: Casualty Transport Module 1 (T-1), Casualty Transport Module 2 (T-2), Casualty Transport Module 3 (T-3), Casualty Transport Module 4 (T-4), Casualty Transport Module 5 (T-5), and Casualty Transport Module 6 (T-6).

UNIT UNIT PRICE MAX AMOUNT

3010 UNDEFINED Each OPTION Casualty Transport Module 1 (T-1)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-1), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

3011 UNDEFINED Each OPTION Casualty Transport Module 2 (T-2)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-2), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

3012 UNDEFINED Each OPTION Casualty Transport Module 3 (T-3)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-3), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

3013 UNDEFINED Each OPTION Casualty Transport Module 4 (T-4)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-4), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

3014 UNDEFINED Each OPTION Casualty Transport Module 5 (T-5)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-5), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

3015 UNDEFINED Each OPTION Casualty Transport Module 6 (T-6)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-6), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

3016 UNDEFINED Each OPTION Casualty Sustainment Kit

FFP

Contractor shall provide the Casualty Sustainment Kit, IAW the Statement of Work (SOW) and Performance Specification, which includes two Modules:

Casualty Sustainment Module 1 (S-1), and Casualty Sustainment Module 2 (S-2).

UNIT UNIT PRICE MAX AMOUNT

3017 UNDEFINED Each OPTION Casualty Sustainment Module 1 (S-1)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Sustainment Module (S-1), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

3018 UNDEFINED Each OPTION Casualty Sustainment Module 2 (S-2)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Sustainment Module (S-2), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

3019 UNDEFINED Hours OPTION Field Representation

FFP

IAW the SOW, the contractor will provide qualified field representation for kit instruction and training, calibration of equipment, field assesment and related guidance. The Field Representation CLIN is assigned a predetermined not to exceed (NTE) dollar amount.

UNIT UNIT PRICE MAX AMOUNT

3020 UNDEFINED Lot OPTION Travel

FFP

All travel shall be conducted in accordance with the Joint Travel Regulation (JTR). The Travel CLIN is assigned a predetermined not to exceed (NTE) dollar amount for the life of the contract.

UNIT UNIT PRICE MAX AMOUNT

3021 UNDEFINED Job

OPTION ECP

FFP

Engineering Change Proposal's may be executed any time within the performance period after Government review and approval. The ECP CLIN is assigned a predetermined not to exceed (NTE) dollar amount.

Ordering Period Three.

UNIT UNIT PRICE MAX AMOUNT

3022 UNDEFINED Lot OPTION Provisioned Items Order

FFP

The government may procure spare parts via delivery orders with pre-negotiated pricing. The PIO CLIN is assigned a predetermined not to exceed (NTE) dollar amount.

UNIT UNIT PRICE MAX AMOUNT

3023 UNDEFINED Each OPTION Techincal Data

FFP

Contract Data Requirements List (CDRLs), DD Form 1423 CDRLs are not seperately priced (NSP)

UNIT UNIT PRICE MAX AMOUNT

4001 UNDEFINED Each

OPTION TCCC CASEVAC

FFP

Contractor shall provide Tactical Combat Casualty Care (TCCC) Casualty Evacuation (CASEVAC) Set, IAW the Statement of Work (SOW) and Performance Specification, which includes four component Kits: Casualty Extraction Kit, Casualty Mobility Kit, Casualty Transport Kit and Casualty Sustainment Kit.

Ordering Period Four

UNIT UNIT PRICE MAX AMOUNT

4002 UNDEFINED Each OPTION Casualty Extraction Kit

FFP

Contractor shall provide the Casualty Evacuation Kit, IAW the Statement of Work (SOW) and Performance Specification, which includes three modules: Casualty Extraction Module 1 (E-1), Casualty Extraction Module 2 (E-2), and Casualty Extraction Module 3 (E-3).

UNIT UNIT PRICE MAX AMOUNT

4003 UNDEFINED Each OPTION Extraction Module 1 (E-1)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Evacuation Module (E-1), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

4004 UNDEFINED Each OPTION Extraction Module 2 (E-2)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Evacuation Module (E-2), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

4005 UNDEFINED Each OPTION Extraction Module 3 (E-3)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Evacuation Module (E-3), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

4006 UNDEFINED Each OPTION Casualty Mobility Kit

FFP

Contractor shall provide the Casualty Mobility Kit, IAW the Statement of Work (SOW) and Performance Specification, which includes two modules: Casualty Mobility Module 1 (M-1), and Casualty Mobility Module 2 (M-2).

UNIT UNIT PRICE MAX AMOUNT

4007 UNDEFINED Each OPTION Mobility Module 1 (M-1)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Mobility Module (M-1), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

4008 UNDEFINED Each OPTION Casualty Mobility Module 2 (M-2)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Mobility Module (M-2), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

4009 UNDEFINED Each OPTION Casualty Transport Kit

FFP

Contractor shall provide the Casualty Transport Kit, IAW the Statement of Work (SOW) and Performance Specification, which includes six Modules: Casualty Transport Module 1 (T-1), Casualty Transport Module 2 (T-2), Casualty Transport Module 3 (T-3), Casualty Transport Module 4 (T-4), Casualty Transport Module 5 (T-5), and Casualty Transport Module 6 (T-6).

UNIT UNIT PRICE MAX AMOUNT

4010 UNDEFINED Each OPTION Casualty Transport Module 1 (T-1)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-1), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

4011 UNDEFINED Each OPTION Casualty Transport Module 2 (T-2)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-2), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

4012 UNDEFINED Each OPTION Casualty Transport Module 3 (T-3)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-3), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

4013 UNDEFINED Each OPTION Casualty Transport Module 4 (T-4)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-4), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

4014 UNDEFINED Each OPTION Casualty Transport Module 5 (T-5)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-5), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

4015 UNDEFINED Each OPTION Casualty Transport Module 6 (T-6)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Transport Module (T-6), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

4016 UNDEFINED Each OPTION Casualty Sustainment Kit

FFP

Contractor shall provide the Casualty Sustainment Kit, IAW the Statement of Work (SOW) and Performance Specification, which includes two Modules:

Casualty Sustainment Module 1 (S-1), and Casualty Sustainment Module 2 (S-2).

UNIT UNIT PRICE MAX AMOUNT

4017 UNDEFINED Each OPTION Casualty Sustainment Module 1 (S-1)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Sustainment Module (S-1), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

4018 UNDEFINED Each OPTION Casualty Sustainment Module 2 (S-2)

FFP

Refurbishment/Replacement: Contractor shall refurbish and replace consumables within the Casualty Sustainment Module (S-2), IAW the Statement of Work (SOW) and Performance Specification.

UNIT UNIT PRICE MAX AMOUNT

4019 UNDEFINED Hours OPTION Field Representation

FFP

IAW the SOW, the contractor will provide qualified field representation for kit instruction and training, calibration of equipment, field assesment and related guidance. The Field Representation CLIN is assigned a predetermined not to exceed (NTE) dollar amount.

UNIT UNIT PRICE MAX AMOUNT

4020 UNDEFINED Lot OPTION Travel

FFP

All travel shall be conducted in accordance with the Joint Travel Regulation (JTR). The Travel CLIN is assigned a predetermined not to exceed (NTE) dollar amount for the life of the contract.

UNIT UNIT PRICE MAX AMOUNT

4021 UNDEFINED Job

OPTION ECP

FFP

Engineering Change Proposal's may be executed any time within the performance period after Government review and approval. The ECP CLIN is assigned a predetermined not to exceed (NTE) dollar amount.

UNIT UNIT PRICE MAX AMOUNT

4022 UNDEFINED Lot OPTION Provisioned Items Order

FFP

The government may procure spare parts via delivery orders with pre-negotiated pricing. The PIO CLIN is assigned a predetermined not to exceed (NTE) dollar amount.

UNIT UNIT PRICE MAX AMOUNT

4023 UNDEFINED Each OPTION Techincal Data

FFP

Contract Data Requirements List (CDRLs), DD Form 1423 CDRLs are not seperately priced (NSP)

CLIN DELIVERY/TASK ORDER MINIMUM/MAXIMUM QUANTITY AND CLIN ORDER

VALUE

The minimum quantity and order value for the given Delivery/Task Order issued for this CLIN shall not be less than the minimum quantity and order value stated in the attachement 03 of Section J. The maximum quantity and order value for the given Delivery/Task Order issued for this CLIN shall not exceed the maximum quantity and order value stated in the table in attachment of Section J.

CLAUSES INCORPORATED BY FULL TEXT

MARKING, LABELING, AND PACKAGING REQUIREMENTS FOR TACTICAL COMBAT CASUALTY

CARE (TCCC) ITEMS

1.0 Marking

1.1 General marking: In addition to any special markings called out by the contract, all unit packages, intermediate packs, and exterior shipping containers shall be marked in accordance with MIL-STD-129P, Change 4, dated 19 September 2007 (Standard Practice for Military Marking). The contractor is responsible for application of the special markings as discussed in the Military Standard regardless of whether specified in the contract or not.

Special markings include, but are not limited to, shelf-life markings and transportation special handling markings.

The marking of pilferable and sensitive materiel will not identify the nature of the materiel. Unless otherwise specified, shipments shall have the address markings applied to the identification marked side of the exterior shipping container. The following shall be marked “FROM: name and address of consignor and TO: name and address of the consignee”.

2.0 Military Shipment Labels (MSLs): The MSLs may be created using commercially available program. These commercial programs can generate a MIL-STD-129 and Defense Transportation Regulation compliant MSLs package labels. Insure that the “ship to” and “mark for” in-the-clear delivery address is complete including:

consignee’s name, organization, department name, office, building, room, street address, city, state, country code, and DODAAC.

3.0 Hazardous Materials

Hazardous Materials is defined as a substance, or waste which has been determined by the Secretary of Transportation to be capable of posing an unreasonable risk to health, safety, and property when transported in commerce and which has been so designated. (This includes all items listed as hazardous in Titles 29, 40 and 49 CFR and other applicable modal regulations effective at the time of shipment.)

4.0 Packaging and marking for hazardous material shall comply with the requirements for the mode of transport and the applicable performance packaging contained in the following documents:

International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air

International Maritime Dangerous Goods Code (IMDG)

__ Code of Federal Regulations (CFR) Title 29, Title 40 and Title 49

Joint Service Regulation AFJMAN24-204/TM38-250/NAVSUPPUB 505/MCO P4030.19/DLAM

4145.23 (for military air shipments)

5.0 Product Material Safety Data Sheets (MSDS): The MSDS is required to be included with every unit pack and intermediate container and shall be included with the packing list inside a waterproof sealed pouch attached to the outside of the package.

6.0 Packaging

6.1 Packing slip requirements: The vendor must use a COMBO report that is generated from Wide Area Work Flow (WAWF) for all complete sets, modules, and individually shipped items delivered to Special Operations Forces Supply Activity (SOFSA). Each package shipped into SOFSA is required to include two copies of the COMBO report; one attached inside a waterproof sealed pouch to the exterior and the other inserted into the package.

7.0 Complete CASEVAC Set requirements: Complete CASEVAC sets delivered to Special Operations Forces Supply (SOFSA) must be packaged inside one stackable container that is moveable by a forklift or pallet jack. The prime integrator is required to provide a diagram inserted into each module containing photographs of each item included in that module plus an itemized list for that module. The itemized list must be separated into two categories. The first of the two categories will include all items that have special requirements (e.g., requires calibration, requires periodic preventative maintenance, items with a limited shelf life, hazardous material, or controlled substances). The second of the two categories will include all the remaining items of the module. All items classified as hazardous material must contain the material safety data sheet (MSDS) for that item, and the container should be marked appropriately. Contents of each module should be packed inside the module container but are not required to be in any specific order within that container.

8.0 Complete Module requirements: The contents of each module should be packed inside the module container but are not required to be in any specific order within that container. The prime integrator is required to provide a diagram containing photographs of each item included in the module and an itemized list for that module. The itemized list will include the NSN, nomenclature, special requirements and quantity of each item. The itemized list must be separated into two categories. The first of the two categories will include all items that have special requirements (e.g., requires calibration, requires periodic preventative maintenance, items with a limited shelf life, hazardous material, or controlled substances). The second of the two categories will include all the remaining items of the module. All items classified as hazardous material must contain the material safety data sheet (MSDS) for that item, and the container should be marked appropriately.

9.0 SPARES or Parts: The prime integrator is required to provide an itemized list, within each package that documents the NSN, nomenclature, special requirements, quantities, and the corresponding module(s) of each item, for packages containing multiple items of different nomenclatures. All items classified as hazardous material must contain the material safety data sheet (MSDS) for that item, and the container should be marked appropriately.

252.211-7003 ITEM IDENTIFICATION AND VALUATION (AUG 2008)

(a) Definitions. As used in this clause'

Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means--

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number;

and serial number within the original part, lot, or batch number.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

DoD unique item identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.

Government's unit acquisition cost means--

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

Issuing agency means an organization responsible for assigning a non-repeatable identifier to an enterprise (i.e., Dun & Bradstreet's Data Universal Numbering System (DUNS) Number, GS1 Company Prefix, or Defense Logistics Information System (DLIS) Commercial and Government Entity (CAGE) Code).

Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.

Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) All delivered items for which the Government's unit acquisition cost is $5,000 or more.

(ii) The following items for which the Government's unit acquisition cost is less than $5,000:

See Packing and Marking Instructions Contract line, subline, or exhibit line item No. Item description

(iii) Subassemblies, components, and parts embedded within delivered items as specified in Attachment Number ----.

(2) The unique item identifier and the component data elements of the DoD unique item identification shall not change over the life of the item.

(3) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The encoded data elements (except issuing agency code) of the unique item identifier are marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology--Transfer Syntax for High Capacity Automatic Data Capture Media.

(4) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent; and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in the version of MIL-STD-130, Identification Marking of U.S. Military Property, cited in the contract Schedule.

(ii) The issuing agency code--

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires unique item identification under paragraph (c)(1)(i) or (ii) of this clause, in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, either as part of, or associated with, the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition…