File A Bill of Materials Handler.xlsx

This is a Bill of Materials document for the University of New Hampshire (UNH) SERC Mechanical to Network Lockset Equipment & Installation project, administered by USNH. The bill of materials specifies all hardware and equipment required for a turnkey networked lockset system installation in SERC residence halls. The procurement includes eight iSTAR Ultra G2 GCM boards, one conversion kit to upgrade existing Pro systems to Ultra G2 SE, six power supply units rated at 6A with 120VAC input, four power distribution modules, two equipment enclosures, and two 8-port Gigabit Ethernet network switches. Additionally, the project calls for 52 Schlage Engage Gateways for installed locations with three units allocated to attic stock, along with 104 left-hand and 117 right-hand Schlage LE Mobile Enabled Wireless Mortise Locks for installed locations. Eight door escutcheon plate sets are also required, with the bidder responsible for sourcing these with UNH approval.

The bill of materials indicates that certain items have been pre-purchased and are on hand, specifically 100 left-hand and 115 right-hand Schlage LE Mobile Enabled Wireless Mortise Locks designated for installed use. Attic stock allocations include two units each of the left-hand and right-hand mortise locks, three Schlage Engage Gateways, and eight GCM board kits. All equipment is specified with manufacturer names and part numbers, with products sourced from vendors including SoftwareHouse, Altronix, NETGEAR, Allegion-Schlage, and others. The door escutcheon plate sets lack a specific part number, requiring bidder selection subject to UNH approval. This comprehensive equipment list represents the infrastructure and access control components necessary for the complete networked lockset system deployment.