FA8574-22-R-0003-0004_FINAL.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

JSU

2. AMENDMENT/MODIFICATION NO.

FA8574-22-R-0003-0004

3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO (If applicable)

6. ISSUED BY CODE

POSITIONING, NAVIGATION, AND TIMING, AFLCMC/WNKF

236 MILLEDGEVILLE ST STE F30

ROBINS AFB GA 31098-1663

BUYER: Kevin F. Hinman kevin.hinman.2@us.af.mil Phone: (478) 222- 9820 Fax: (000) 000-0000 No Collect Calls

7. ADMINISTERED BY (If other than item 6) CODEFA8574

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

CODE

X

9A. AMENDMENT OF SOLICITATION NO.

FA857422R0003

9B. DATED (SEE ITEM 11)

1-SEP-2022

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods. ( a ) By completing Items 8 and 15, and returning copies of the amendment; ( b ) By acknowledging receipt of this amendment on each copy of the offer submitted; or ( c ) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return 1 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PLEASE NOTE: The use of non-government advisors to provide technical expertise and evaluation of proposals. Please see Attachment 15 of this Request for Proposal (RFP) for more details.

15A. NAME AND TITLE OF SIGNER (Type or print)

15B. CONTRACTOR/OFFEROR

BY ________________________________________________________

(Signature of person authorized to sign)

15C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16B. UNITED STATES OF AMERICA

BY ____________________________________________________

(Signature of Contracting Officer)

16C. DATE SIGNED

FACILITY CODE

NSN 7540-01-152-8070

PREVIOUS EDITION UNUSABLE

30-105 STANDARD FORM 30 (REV. 10-83)

PRESCRIBED BY GSA

FAR (48 CFR) 53.243

X

X X

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

FA8574-22-R-0003-0004

Continuation of block 14. DESCRIPTION OF AMENDMENT/MODIFICATION

The purpose of this RFP Amendment is to change the method of proposal submissions from PIEE to DoD SAFE. As a result, the following changes are hereby implemented:

A. ATTACH04_Instructions to Register a PIEE Account dated 18 March 2022 is hereby removed in its entirety from this solicitation.

B. ATTACH05_How to Post Offer on PIEE dated 18 March 2022 is hereby removed in its entirety from this solicitation.

C. ATTACH09_SectionLM_Rev03 dated 06 December 2022 is hereby incorporated into the solicitation.

D. The Proposal due date is not extended as a result of this amendment. Proposals are due by 12 December 2022 at 1700 EST.

END OF AMENDMENT

PART I - THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

B.1 GENERAL:This Requirements type contract is in support of Pocket J System. The Contractor (independently and not as an agent of the Government) shall furnish all necessary personnel, labor, supplies and materials (except as otherwise authorized by the Contracting Officer) as required to provide Program Management, Maintenance, GFE/GFP Management, Teardown, Test, and Evaluation (TT&E), Repair, Cybersecurity, Block Cycle and Software Upgrade, Enginering Support, Training, Over and Above, Travel, Contractor Furnished Material requirements identified within the Schedule, Section B, and the Performance Work Statement (PWS). Performance shall be in accordance with all provisions and specifications as stipulated herein.

B.2 CONTRACT TYPE: This is an Indefinite Delivery Requirements type contract as contemplated at FAR

16.503. This contract utilizes a Best Estimated Quantity (BEQ) with a mix of Contract Line Item (CLINs) types, specifically Firm Fixed Price (FFP), Cost Plus Fixed Fee (CPFF), Not Separately Priced (NSP), and Cost Reimbursable No Fee (CRNF). Each CLIN indicates the type used for each particular requirement.

B.3 MINIMUM/MAXIMUM VALUE: The contractor shall furnish to the Government, if and when ordered, the items of supplies or services specified in this Schedule up to and including the “Maximum” amount of $XXXXXX.XX for all orders issued hereunder. The Government shall order at least the “Minimum” amount of 2,000,000.00 in conjunction with award of the basic contract. The quantities of supplies or services specified in this Schedule are estimates only and are not purchased by this contract. Except as this contract may otherwise provide, if the Government’s requirements do not result in orders in the quantities described as “estimated” or “maximum” in the schedule, that fact shall not constitute the basis for an equitable price adjustment equitable price adjustment.

B.4 ORDERING PERIODS: In accordance with the clause in Section I of this contract, DFARS

252.216 7006 Ordering, orders may be issued hereunder for this 60 month strategy: One, Twelve (12) month base period and four (4), 12 month ordering periods. Orders issued hereunder shall utilize the CLIN representing the period in effect at the time of order award for purposes of pricing. The ordering periods associated with each CLIN series are defined as follows:

ORDERING PERIOD STRUCTURE

Base Ordering Period - 18 June 2023 to 17 June 2024 (000X) Ordering Period 1 - 18 June 2024 to 17 June 2025 (100X) Ordering Period 2 - 18 June 2025 to 17 June 2026 (200X) Ordering Period 3 - 18 June 2026 to 17 June 2027 (300X) Ordering Period 4 - 18 June 2027 to 17 June 2028 (400X)

B.5 AUTHORITY TO ISSUE ORDERS: Orders under this contract may only be issued by members of the Positioning, Navigation, and Timing (PNT) Contracting Office (WNKF).

B.6 PLACE OF PERFORMANCE: Place of performance of orders issued hereunder shall be stipulated within the individual delivery/task orders.

B.7 ACRN, Purchase Request, PR Line Item and Period of Performance to be cited on each order issued hereunder.

B.8 Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.

B.9 In accordance with the OSD AT&L memorandum dated 10 November 2011, any incurred proposal preparation expenses are to be treated as indirect costs and direct charge billings against the resultant task/delivery order are unallowable.

B.10 PAA: Packaging IAW attached AFMC 158

B.11 CDRLs: Attachment 11 of this RFP contains the DD1423 CDRLs for the base year only. The CDRLs for the subsequent Ordering Periods have not been developed. These CDRLs will not change in the subsequent Ordering Periods but their Line Items were not included in this RFP. These CDRLs with their cooresponding Line Items will be Amended into the RFP as soon as they are provided.

Program Management

Basic Performance Period Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R408 Program Management Program Management IAW Paragraph 4.3 of the PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

Program Management

Basic Performance Period

IAW PWS 12 MO

Maintenance Support

Basic Performance Period Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R425 Maintenance Support Maintenance Support Services IAW para. 4.5 of the PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

GFP/GFE Management

Basic Performance Period Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R408 GFE/GFP Management

GFP/GFE Management

Basic Performance Period Consumable/Expendable, Contractor Repair, and MILSTRIP Repair Management of Government Furnished Equipment/Property IAW PWS Para 4.4 dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Teardown, Test, and Evaluation (TT&E)

Basic Performance Period Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

20 EA

R408 Teardown, Test and Evaluation (TT&E) Teardown, Test, and Evaluation IAW para. 4.7.1 of the PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity

Teardown, Test, and Evaluation (TT&E)

Basic Performance Period None none Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 20 EA TBC

Proposed Period of Performance

IAW PWS 20 EA

Repair

Basic Performance Period Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

20 EA

R408 Repair Repair IAW para. 4.7 of the PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 20 EA TBC

Proposed Period of

IAW PWS 20 EA

Cybersecurity

Basic Performance Period Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R408 Cybersecurity Cybersecurity Support IAW Paragraph 6.0 of the PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Block Cycle Upgrade

Basic Performance Period Item No.

Cost Plus Fixed Fee Best Estimated Qty

U/I Unit Price

1 LO

R408 Block Cycle Upgrade Block Cycle Upgrade IAW para. 8.1. of PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Block Cycle Upgrade

Basic Performance Period

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

Engineering Support Services

Basic Performance Period Item No.

Cost Plus Fixed Fee Best Estimated Qty

U/I Unit Price

1 LO

R408 Engineering Support Services Engineering Support Services IAW para. 4.6 of PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of

IAW PWS 1 LO TBC

Engineering Support Services

Basic Performance Period Proposed Period of Performance

IAW PWS 1 LO

Training

Basic Performance Period Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

5 EA

R408 Training Training Requirements as outlined IAW PWS para. 9.0 dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 5 EA TBC

Proposed Period of Performance

IAW PWS 5 EA

Over and Above

Basic Performance Period Item No.

Cost Plus Fixed Fee Best Estimated Qty

U/I Unit Price

1 LO

Over and Above

Basic Performance Period Over and Above Over and Above IAW PWS para. 4.8 dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

Travel

Basic Performance Period Item No.

Cost Reimbursement - No Fee Best Estimated Qty

U/I Unit Price

1 LO

TRAV

TRAVEL

TRAVEL AS APPROVED IN ADVANCE BY CONTRACTING OFFICER IAW PWS para. 4.9 dated 18 November 2022 TRAVEL IN SUPPORT OF CLINs 0002, 0004, 0005, 0007, 0008, and 0010. TRAVEL REIMBURSED IAW FAR 31.2 and JTR Priority: R ROUTINE Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of

IAW PWS 1 LO

Contractor Furnished Property

Basic Performance Period Item No.

Cost Reimbursable No Fee Best Estimated Qty

U/I Unit Price

1 LO

R408 Contractor Furnished Property Contractor Furnished Property IAW PWS para. 4.4.1 dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

DATA

Basic Performance Period Item No.

Not Separately Priced Quantity U/I Unit Price

1 LO NSP

DATA

DATA

Provide requested Data IAW the PWS dated 18 November 2022 and applicable DD1423s listed in Attachment 11

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Exhibit: A Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

+ IAW1423 1 LO TBC

Proposed Period of Performance

+ IAW1423 1 LO

Program Management

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R408 Program Management Program Management IAW Paragraph 4.3 of the PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Program Management

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Maintenance Support

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R425 Maintenance Support Maintenance Support Services IAW para. 4.5 of the PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of

IAW PWS 12 MO

Government Furnished Property

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R408 GFE/GFP Management Consumable/Expendable, Contractor Repair, and MILSTRIP Repair Management of Government Furnished Equipment/Property IAW PWS Para 4.4 dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Teardown, Test, and Evaluation (TT&E)

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

20 EA

R408 Teardown, Test and Evaluation (TT&E) Teardown, Test, and Evaluation IAW para. 4.7.1 of the PWS dated 18 November 2022

Teardown, Test, and Evaluation (TT&E)

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 20 EA TBC

Proposed Period of Performance

IAW PWS 20 EA

Repair

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

20 EA

R408 Repair Repair IAW para. 4.7 of the PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required

Repair

IAW PWS 20 EA TBC

Proposed Period of Performance

IAW PWS 20 EA

Cybersecurity

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R408 Cybersecurity Cybersecurity Support IAW Paragraph 6.0 of the PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of

Block Cycle Upgrade

Item No.

Cost Plus Fixed Fee Best Estimated Qty

U/I Unit Price

1 LO

R408 Block Cycle Upgrade Block Cycle Upgrade IAW para. 8.1. of PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

Engineering Support Services

Item No.

Cost Plus Fixed Fee Best Estimated Qty

U/I Unit Price

1 LO

R408 Engineering Support Services Engineering Support Services IAW para. 4.6 of PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required

Engineering Support Services

Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

Training

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Total Price

5 EA

R408 Training Training Requirements as outlined IAW PWS para. 9.0 dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 5 EA TBC

Proposed Period of

IAW PWS 5 EA

Over and Above

Item No.

Cost Plus Fixed Fee Best Estimated Qty

U/I Unit Price

1 LO

R408 Over and Above Over and Above IAW PWS para. 4.8 dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

Travel

Item No.

Cost Reimbursement - No Fee Best Estimated Qty

U/I Unit Price

1 LO

TRAV

TRAVEL

TRAVEL AS APPROVED IN ADVANCE BY CONTRACTING OFFICER IAW PWS para. 4.9 dated 18 November 2022 TRAVEL IN SUPPORT OF CLINs 1002, 1004, 1005, 1007, 1008, and 1010. TRAVEL REIMBURSED IAW FAR 31.2 and JTR Priority: R ROUTINE Place of Perf Quantity (U/I) To be cited on individual orders issued

Travel

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

Contractor Furnished Property

Item No.

Cost Reimbursable No Fee Best Estimated Qty

U/I Unit Price

1 LO

R408 Contractor Furnished Property Contractor Furnished Property IAW PWS para. 4.4.1 dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

DATA

Item No.

Not Separately Priced

DATA

Quantity U/I Unit Price

1 LO NSP

DATA

DATA

Provide requested Data IAW the PWS dated 18 November 2022 and applicable DD1423s listed in Attachment 11

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Exhibit: A Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

+ IAW1423 1 LO TBC

Proposed Period of Performance

+ IAW1423 1 LO

Program Management

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R408 Program Management Program Management IAW Paragraph 4.3 of the PWS dated 18 November 2022

Program Management

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Maintenance Support

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R425 Maintenance Support Maintenance Support Services IAW para. 4.5 of the PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None

Maintenance Support

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Government Furnished Property

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R408 GFE/GFP Management Consumable/Expendable, Contractor Repair, and MILSTRIP Repair Management of Government Furnished Equipment/Property IAW PWS Para 4.4 dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of

Teardown, Test, and Evaluation (TT&E)

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

20 EA

R408 Teardown, Test and Evaluation (TT&E) Teardown, Test, and Evaluation IAW para. 4.7.1 of the PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 20 EA TBC

Proposed Period of Performance

IAW PWS 20 EA

Repair

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

20 EA

R408 Repair Repair IAW para. 4.7 of the PWS dated 18 November 2022

Repair

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 20 EA TBC

Proposed Period of Performance

IAW PWS 20 EA

Cybersecurity

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R408 Cybersecurity Cybersecurity Support IAW Paragraph 6.0 of the PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) To be cited on individual orders issued

Cybersecurity

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Block Cycle Upgrade

Item No.

Cost Plus Fixed Fee Best Estimated Qty

U/I Unit Price

1 LO

R408 Block Cycle Upgrade Block Cycle Upgrade IAW para. 8.1. of PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

Engineering Support Services

Item No.

Cost Plus Fixed Fee

Engineering Support Services

Best Estimated Qty

U/I Unit Price

1 LO

R408 Engineering Support Services Engineering Support Services IAW para. 4.6 of PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

Training

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

5 EA

R408 Training Training Requirements as outlined IAW PWS para. 9.0 dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

Training

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 5 EA TBC

Proposed Period of Performance

IAW PWS 5 EA

Over and Above

Item No.

Cost Plus Fixed Fee Best Estimated Qty

U/I Unit Price

1 LO

R408 Over and Above Over and Above IAW PWS para. 4.8 dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of

Travel

Item No.

Cost Reimbursement - No Fee Best Estimated Qty

U/I Unit Price

1 LO

TRAV

TRAVEL

TRAVEL AS APPROVED IN ADVANCE BY CONTRACTING OFFICER IAW PWS para. 4.9 dated 18 November 2022 TRAVEL IN SUPPORT OF CLINs 2002, 2004, 2005, 2007, 2008, and 2010. TRAVEL REIMBURSED IAW FAR 31.2 and JTR Priority: R ROUTINE Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

Contractor Furnished Property

Item No.

Cost Reimbursable No Fee Best Estimated Qty

U/I Unit Price

1 LO

R408 Contractor Furnished Property Contractor Furnished Property IAW PWS para. 4.4.1 dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued

Contractor Furnished Property

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

DATA

Item No.

Not Separately Priced Best Estimated Qty

U/I Unit Price

1 LO NSP

DATA

DATA

Provide requested Data IAW the PWS dated 18 November 2022 and applicable DD1423s listed in Attachment 11

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Exhibit: A Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

+ IAW1423 1 LO TBC

Proposed Period of

+ IAW1423 1 LO

Program Management

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R408 Program Management Program Management IAW Paragraph 4.3 of the PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Maintenance Support

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R425 Maintenance Support Maintenance Support Services IAW para. 4.5 of the PWS dated 18 November 2022

Maintenance Support

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Government Furnished Property

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R408 GFE/GFP Management Consumable/Expendable, Contractor Repair, and MILSTRIP Repair Management of Government Furnished Equipment/Property IAW PWS Para 4.4 dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None none

Government Furnished Property

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Tearown, Test, and Evaluation (TT&E)

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

20 EA

R408 Teardown, Test and Evaluation (TT&E) Teardown, Test, and Evaluation IAW para. 4.7.1 of the PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 20 EA TBC

Proposed Period of

Repair

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

20 EA

R408 Repair Repair IAW para. 4.7 of the PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 20 EA TBC

Proposed Period of Performance

IAW PWS 20 EA

Cybersecurity

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R408 Cybersecurity Cybersecurity Support IAW Paragraph 6.0 of the PWS dated 18 November 2022

Cybersecurity

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Block Cycle Upgrade

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R408 Block Cycle Upgrade Block Cycle Upgrade IAW para. 8.1. of PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required

Block Cycle Upgrade

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Engineering Support Services

Item No.

Cost Plus Fixed Fee Best Estimated Qty

U/I Unit Price

1 LO

R408 Engineering Support Services Engineering Support Services IAW para. 4.6 of PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

Training

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

Training

5 EA

R408 Training Training Requirements as outlined IAW PWS para. 9.0 dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 5 EA TBC

Proposed Period of Performance

IAW PWS 5 EA

Over and Above

Item No.

Cost Plus Fixed Fee Best Estimated Qty

U/I Unit Price

1 LO

R408 Over and Above Over and Above IAW PWS para. 4.8 dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

ISO 9001-2008 2008

Over and Above

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

Travel

Item No.

Cost Reimbursement - No Fee Best Estimated Qty

U/I Unit Price

1 LO

TRAV

TRAVEL

TRAVEL AS APPROVED IN ADVANCE BY CONTRACTING OFFICER IAW PWS para. 4.9 dated 18 November 2022 TRAVEL IN SUPPORT OF CLINs 3002, 3004, 3005, 3007, 3008, and 3010. TRAVEL REIMBURSED IAW FAR 31.2 and JTR Priority: R ROUTINE Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

Contractor Furnished Property

Item No.

Cost Reimbursable No Fee Best Estimated Qty

U/I Unit Price

1 LO

Contractor Furnished Property

Contractor Furnished Property

Contractor Furnished Property IAW PWS para. 4.4.1 dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

DATA

Item No.

Not Separately Priced Best Estimated Qty

U/I Unit Price

1 LO NSP

DATA

DATA

Provide requested Data IAW the PWS dated 18 November 2022 and applicable DD1423s listed in Attachment 11

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Exhibit: A Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

+ IAW1423 1 LO TBC

Proposed Period of Performance

+ IAW1423 1 LO

Program Management

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R408 Program Management Program Management IAW Paragraph 4.3 of the PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of

Maintenance Support

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

12 MO

R425 Maintenance Support Maintenance Support Services IAW para. 4.5 of the PWS dated 18 November 2022 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed…