FA8574-22-R-0003_FINAL.pdf
PDF 1 MB Posted
- Attached to
- Pocket - J CLS Support Federal contract opportunity
- Solicitation number
- FA8574-22-R-0003
About this file
This Request for Proposals (RFP) solicits competitive proposals to provide lifecycle support services for the Pocket J System. Key requirements include program management, maintenance support, management of government furnished equipment, teardown and evaluation, repair, cybersecurity support, block cycle upgrades, engineering support, training, over and above work, travel, contractor furnished property, and data deliverables. The contract will have a basic period of performance with four ordering periods through June 2028. It will utilize firm fixed price, cost plus fixed fee, and cost reimbursable line items. This is a 100% competitive small business set-aside utilizing LPTA source selection procedures. Proposals are due by 31 October 2022 with award anticipated thereafter.
View the file
Other files for this federal contract opportunity
Show all 37
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 1447 (REV. 8/2016)
PREVIOUS EDITION NOT USABLE Prescribed by GSA - FAR (48 CFR) 53.214(d)
23. ACCOUNTING AND APPROPRIATION DATA
SEE SCHEDULE
24. TOTAL AWARD AMOUNT (For Government Use Only)
TELEPHONE NUMBER
UNIQUE ENTITY
IDENTIFIER
CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER
NO COLLECT CALLS
4. SOLICITATION NUMBER
FA8574-22-R-0003
X
X
6.SOLICITATION ISSUE DATE
8. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: 100 % FOR
SMALL BUSINESS WOMEN-OWNED SMALL BUSINESS (WOSB)
ELIGIBLE UNDER THE WOSB PROGRAM
HUBZONE SMALL
BUSINESS EDWOSB
SERVICE-DISABLED VETERAN-
OWNED SMALL BUSINESS NAICS: 541330
8(A) SIZE STANDARD: $41.50
DATE SIGNED
28. UNITED STATES OF AMERICA (Signature of Contracting Officer)
26. AWARD OF CONTRACT: YOUR OFFER ON SOLICITATION NUMBER
SHOWN IN BLOCK 4 INCLUDING ANY ADDITIONS OR CHANGES WHICH
ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:
THIS IS A TOTAL SMALL BUSINESS SET-ASIDE.
Subject to the terms and conditions stated herein, the Contractor agrees to hold its offered prices firm for 120 days.
PLEASE NOTE: The use of non-government advisors to provide technical expertise and evaluation of proposals. Please see Attachment 15 of this Request for Proposal (RFP) for more details.
SEE LINE ITEM SCHEDULE
22.
AMOUNT
16. AUTHORITY FOR USING OTHER THAN 10 USC 2304 41 USC 253
FULL AND OPEN COMPETITION (c) ( ) (c) ( )
DATE SIGNED
27. SIGNATURE OF OFFEROR/CONTRACTOR
20.
UNIT
21.
UNIT PRICE
19.
QUANTITY
13. CONTRACTOR OFFEROR CODE FACILITY CODE
11. IF OFFER IS ACCEPTED BY THE GOVERNMENT WITHIN * ___ CALENDAR DAYS (60 CALENDAR
DAYS UNLESS OFFEROR INSERTS A DIFFERENT PERIOD) FROM THE DATE SET FORTH IN BLOCK 9
ABOVE, THE CONTRACTOR AGREES TO HOLD ITS OFFERED PRICES FIRM FOR THE ITEMS
SOLICITED HEREIN AND TO ACCEPT ANY RESULTING CONTRACT SUBJECT TO THE TERMS AND
CONDITIONS STATED HEREIN. *120
RATING
DO: A7
3. AWARD/EFFECTIVE DATE
FA8574
2. CONTRACT NUMBER
X
17.
ITEM NUMBER
12. ADMINISTERED BY CODE
Total
SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK: 14
SCD:B
NAME AND TITLE OF SIGNER (Type or Print) NAME OF CONTRACTING OFFICER
5. SOLICITATION TYPE
SEALED BIDS NEGOTIATED
(IFB) (RFP)
15. PROMPT PAYMENT DISCOUNT
25. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 1
COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SETFORTH
OR OTHERWISE IDENTIFIED ABOVE AND ON ANY CONTINUATION SHEETS SUBJECT
THE TERMS AND CONDITIONS SPECIFIED HEREIN.
10. ITEMS TO BE PURCHASED (Brief Description)
SUPPLIES SERVICES Military and Aerospace Equipment and Military Weapons
9. (Agency Use)
Offers will be received at the issuing office until the date and time specified below. Late offers are subject to late proposal provisions incorporated herein. All offers are subject to provisions, representations, certifications, and specifications as are attached or incorporated by reference.
31-OCT-2022 5:00PM
18.
SCHEDULE OF SUPPLIES/SERVICES
14. PAYMENT WILL BE MADE BY CODE
X
7. ISSUED BY CODE
POSITIONING, NAVIGATION, AND TIMING, AFLCMC/WNKF
236 MILLEDGEVILLE ST STE F30
ROBINS AFB GA 31098-1663
BUYER: Kevin F. Hinman kevin.hinman.2@us.af.mil Phone: (478) 222- 9820 Fax: (000) 000-0000
X
1. THIS CONTRACT IS A RATED ORDER
UNDER DPAS (15 CFR 700)SOLICITATION/CONTRACT
BIDDER/OFFEROR TO COMPLETE BLOCKS 11, 13, 15, 21, 22, & 27.
JSU
STANDARD FORM 1447 (REV. 8/2016) BACK
NO RESPONSE FOR REASONS CHECKED
TYPE OR PRINT NAME AND TITLE OF SIGNER
SIGNATURENAME AND ADDRESS OF FIRM (Include Zip Code)
WE DO NOT DESIRE TO BE RETAINED ON THE MAILING LIST FOR FUTURE PROCUREMENT OF THE TYPE OF
ITEMS INVOLVED
WE DO
OTHER (Specify)
UNABLE TO IDENTIFY THE ITEM(S)
CANNOT COMPLY WITH SPECIFICATIONS CANNOT MEET DELIVERY REQUIREMENT
DO NOT REGULARILY MANUFACTURE OR SELL THE TYPE
OF ITEMS INVOLVED
DATE AND LOCAL TIME 31 OCT 2022 5:00 PM
SOLICITATION NUMBER FA857422R0003
FROM: AFFIX
STAMP
HERE
TO:
ATTN: Kevin F Hinman
POSITIONING, NAVIGATION, AND TIMING, AFLCMC/WNKF
236 MILLEDGEVILLE ST STE F30
ROBINS AFB GA 31098-1663
FA8574-22-R-0003
PART I - THE SCHEDULE
SECTION B
SUPPLIES OR SERVICES AND PRICES/COSTS
B.1 GENERAL:This Requirements type contract is in support of Pocket J System. The Contractor (independently and not as an agent of the Government) shall furnish all necessary personnel, labor, supplies and materials (except as otherwise authorized by the Contracting Officer) as required to provide Program Management, Maintenance, GFE/GFP Management, Teardown, Test, and Evaluation (TT&E), Repair, Cybersecurity, Block Cycle and Software Upgrade, Enginering Support, Training, Over and Above, Travel, Contractor Furnished Material requirements identified within the Schedule, Section B, and the Performance Work Statement (PWS). Performance shall be in accordance with all provisions and specifications as stipulated herein.
B.2 CONTRACT TYPE: This is an Indefinite Delivery Requirements type contract as contemplated at FAR 16.503. This contract utilizes a Best Estimated Quantity (BEQ) with a mix of Contract Line Item (CLINs) types, specifically Firm Fixed Price (FFP), Cost Plus Fixed Fee (CPFF), Not Separately Priced (NSP), and Cost Reimbursable No Fee (CRNF). Each CLIN indicates the type used for each particular requirement.
B.3 MINIMUM/MAXIMUM VALUE: The contractor shall furnish to the Government, if and when ordered, the items of supplies or services specified in this Schedule up to and including the “Maximum” amount of $XXXXXX.XX for all orders issued hereunder. The Government shall order at least the “Minimum” amount of 2,000,000.00 in conjunction with award of the basic contract. The quantities of supplies or services specified in this Schedule are estimates only and are not purchased by this contract. Except as this contract may otherwise provide, if the Government’s requirements do not result in orders in the quantities described as “estimated” or “maximum” in the schedule, that fact shall not constitute the basis for an equitable price adjustment equitable price adjustment.
B.4 ORDERING PERIODS: In accordance with the clause in Section I of this contract, DFARS
252.216 7006 Ordering, orders may be issued hereunder for this 60 month strategy: One, Twelve (12) month base period and four (4), 12 month ordering periods. Orders issued hereunder shall utilize the CLIN representing the period in effect at the time of order award for purposes of pricing. The ordering periods associated with each CLIN series are defined as follows:
ORDERING PERIOD STRUCTURE
Base Ordering Period - 18 June 2023 to 17 June 2024 (000X) Ordering Period 1 - 18 June 2024 to 17 June 2025 (100X) Ordering Period 2 - 18 June 2025 to 17 June 2026 (200X) Ordering Period 3 - 18 June 2026 to 17 June 2027 (300X) Ordering Period 4 - 18 June 2027 to 17 June 2028 (400X)
B.5 AUTHORITY TO ISSUE ORDERS: Orders under this contract may only be issued by members of the Positioning, Navigation, and Timing (PNT) Contracting Office (WNKF).
B.6 PLACE OF PERFORMANCE: Place of performance of orders issued hereunder shall be stipulated within the individual delivery/task orders.
B.7 ACRN, Purchase Request, PR Line Item and Period of Performance to be cited on each order issued hereunder.
B.8 Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.
B.9 In accordance with the OSD AT&L memorandum dated 10 November 2011, any incurred proposal preparation expenses are to be treated as indirect costs and direct charge billings against the resultant task/delivery order are unallowable.
B.10 PAA: Packaging IAW attached AFMC 158
B.11 CDRLs: Attachment 11 of this RFP contains the DD1423 CDRLs for the base year only. The CDRLs for the subsequent Ordering Periods have not been developed. These CDRLs will not change in the subsequent Ordering Periods but their Line Items were not included in this RFP. These CDRLs with their cooresponding Line Items will be Amended into the RFP as soon as they are provided.
Program Management
Basic Performance Period Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 Program Management Program Management IAW Paragraph 4.3 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Maintenance Support
Basic Performance Period Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R425 Maintenance Support Maintenance Support Services IAW para. 4.5 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
GFP/GFE Management
Basic Performance Period Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 GFE/GFP Management Consumable/Expendable, Contractor Repair, and MILSTRIP Repair Management of Government Furnished Equipment/Property IAW PWS Para 4.4 dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
GFP/GFE Management
Basic Performance Period
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Teardown, Test, and Evaluation (TT&E)
Basic Performance Period Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 Teardown, Test and Evaluation (TT&E) Teardown, Test, and Evaluation IAW para. 4.7.1 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of
Teardown, Test, and Evaluation (TT&E)
Basic Performance Period IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Repair
Basic Performance Period Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
20 EA
R408 Repair Repair IAW para. 4.7 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 20 EA *12 Months
Proposed Period of Performance
IAW PWS 20 EA
Cybersecurity
Basic Performance Period Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
Cybersecurity
Basic Performance Period
12 MO
R408 Cybersecurity Cybersecurity Support IAW Paragraph 6.0 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Block Cycle Upgrade
Basic Performance Period Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 Block Cycle Upgrade Block Cycle Upgrade IAW para. 8.1. of PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Block Cycle Upgrade
Basic Performance Period Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Engineering Support Services
Basic Performance Period Item No.
Cost Plus Fixed Fee Best Estimated Qty
U/I Unit Price
1 LO
R408 Engineering Support Services Engineering Support Services IAW para. 4.6 of PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 1 LO *12 Months
Proposed Period of
IAW PWS 1 LO
Training
Basic Performance Period Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
5 EA
R408 Training Training Requirements as outlined IAW PWS para. 9.0 dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 5 EA *12 Months
Proposed Period of Performance
IAW PWS 5 EA
Over and Above
Basic Performance Period Item No.
Cost Plus Fixed Fee Best Estimated Qty
U/I Unit Price
1 LO
R408 Over and Above Over and Above IAW PWS para. 4.8 dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required
Over and Above
Basic Performance Period Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 1 LO *12 Months
Proposed Period of Performance
IAW PWS 1 LO
Travel
Basic Performance Period Item No.
Cost Reimbursement - No Fee Best Estimated Qty
U/I Unit Price
1 LO
TRAV
TRAVEL
TRAVEL AS APPROVED IN ADVANCE BY CONTRACTING OFFICER IAW PWS para. 4.9 dated 04 August 2022 TRAVEL IN SUPPORT OF CLINs 0002, 0004, 0005, 0007, 0008, and 0010. TRAVEL REIMBURSED IAW FAR 31.2 and JTR Priority: R ROUTINE Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 1 LO *12 Months
Proposed Period of Performance
IAW PWS 1 LO
Contractor Furnished Property
Basic Performance Period Item No.
Cost Reimbursable No Fee Best Estimated Qty
1 LO
Contractor Furnished Property
Basic Performance Period R408 Contractor Furnished Property Contractor Furnished Property IAW PWS para. 4.4.1 dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 1 LO *12 Months
Proposed Period of Performance
IAW PWS 1 LO
DATA
Basic Performance Period Item No.
Not Separately Priced Quantity U/I Unit Price
1 LO NSP
DATA
DATA
Provide requested Data IAW the PWS dated 04 August 2022 and applicable DD1423s listed in Attachment 11
Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Exhibit: A Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
+ IAW1423 1 LO *12 Months
Proposed Period of Performance
+ IAW1423 1 LO
Program Management
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 Program Management Program Management IAW Paragraph 4.3 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of
Maintenance Support
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R425 Maintenance Support Maintenance Support Services IAW para. 4.5 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Government Furnished Property
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 GFE/GFP Management Consumable/Expendable, Contractor Repair, and MILSTRIP Repair Management of Government Furnished Equipment/Property IAW PWS Para 4.4 dated 04 August 2022
Government Furnished Property
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Teardown, Test, and Evaluation (TT&E)
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 Teardown, Test and Evaluation (TT&E) Teardown, Test, and Evaluation IAW para. 4.7.1 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Teardown, Test, and Evaluation (TT&E)
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Repair
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
20 EA
R408 Repair Repair IAW para. 4.7 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 20 EA *12 Months
Proposed Period of
IAW PWS 20 EA
Cybersecurity
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 Cybersecurity Cybersecurity Support IAW Paragraph 6.0 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Block Cycle Upgrade
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 Block Cycle Upgrade Block Cycle Upgrade IAW para. 8.1. of PWS dated 04 August 2022
Block Cycle Upgrade
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Engineering Support Services
Item No.
Cost Plus Fixed Fee Best Estimated Qty
U/I Unit Price
1 LO
R408 Engineering Support Services Engineering Support Services IAW para. 4.6 of PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of
IAW PWS 1 LO *12 Months
Engineering Support Services
Proposed Period of Performance
IAW PWS 1 LO
Training
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price Total Price
5 EA
R408 Training Training Requirements as outlined IAW PWS para. 9.0 dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 5 EA *12 Months
Proposed Period of Performance
IAW PWS 5 EA
Over and Above
Item No.
Cost Plus Fixed Fee Best Estimated Qty
U/I Unit Price
1 LO
R408
Over and Above
Over and Above Over and Above IAW PWS para. 4.8 dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 1 LO *12 Months
Proposed Period of Performance
IAW PWS 1 LO
Travel
Item No.
Cost Reimbursement - No Fee Best Estimated Qty
U/I Unit Price
1 LO
TRAV
TRAVEL
TRAVEL AS APPROVED IN ADVANCE BY CONTRACTING OFFICER IAW PWS para. 4.9 dated 04 August 2022 TRAVEL IN SUPPORT OF CLINs 1002, 1004, 1005, 1007, 1008, and 1010. TRAVEL REIMBURSED IAW FAR 31.2 and JTR Priority: R ROUTINE Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 1 LO *12 Months
Proposed Period of
Contractor Furnished Property
Item No.
Cost Reimbursable No Fee Best Estimated Qty
U/I Unit Price
1 LO
R408 Contractor Furnished Property Contractor Furnished Property IAW PWS para. 4.4.1 dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 1 LO *12 Months
Proposed Period of Performance
IAW PWS 1 LO
DATA
Item No.
Not Separately Priced Quantity U/I Unit Price
1 LO NSP
DATA
DATA
Provide requested Data IAW the PWS dated 04 August 2022and applicable DD1423s listed in Attachment 11
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Exhibit: A Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
+ IAW1423 1 LO *12 Months
Proposed Period of Performance
+ IAW1423 1 LO
Program Management
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 Program Management Program Management IAW Paragraph 4.3 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required
Program Management
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Maintenance Support
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R425 Maintenance Support Maintenance Support Services IAW para. 4.5 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Government Furnished Property
Item No.
Firm Fixed Price
Government Furnished Property
Best Estimated Qty
U/I Unit Price
12 MO
R408 GFE/GFP Management Consumable/Expendable, Contractor Repair, and MILSTRIP Repair Management of Government Furnished Equipment/Property IAW PWS Para 4.4 dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Teardown, Test, and Evaluation (TT&E)
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 Teardown, Test and Evaluation (TT&E) Teardown, Test, and Evaluation IAW para. 4.7.1 of the PWS dated 04 August 2022
Teardown, Test, and Evaluation (TT&E)
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Repair
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
20 EA
R408 Repair Repair IAW para. 4.7 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required
Repair
IAW PWS 20 EA *12 Months
Proposed Period of Performance
IAW PWS 20 EA
Cybersecurity
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 Cybersecurity Cybersecurity Support IAW Paragraph 6.0 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of
Block Cycle Upgrade
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 Block Cycle Upgrade Block Cycle Upgrade IAW para. 8.1. of PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Engineering Support Services
Item No.
Cost Plus Fixed Fee Best Estimated Qty
U/I Unit Price
1 LO
R408 Engineering Support Services Engineering Support Services IAW para. 4.6 of PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required
Engineering Support Services
Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 1 LO *12 Months
Proposed Period of Performance
IAW PWS 1 LO
Training
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
5 EA
R408 Training Training Requirements as outlined IAW PWS para. 9.0 dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 5 EA *12 Months
Proposed Period of
IAW PWS 5 EA
Over and Above
Item No.
Cost Plus Fixed Fee Best Estimated Qty
U/I Unit Price
1 LO
R408 Over and Above Over and Above IAW PWS para. 4.8 dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 1 LO *12 Months
Proposed Period of Performance
IAW PWS 1 LO
Travel
Item No.
Cost Reimbursement - No Fee Best Estimated Qty
U/I Unit Price
1 LO
TRAV
TRAVEL
TRAVEL AS APPROVED IN ADVANCE BY CONTRACTING OFFICER IAW PWS para. 4.9 dated 04 August 2022 TRAVEL IN SUPPORT OF CLINs 2002, 2004, 2005, 2007, 2008, and 2010. TRAVEL REIMBURSED IAW FAR 31.2 and JTR Priority: R ROUTINE Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required
Travel
IAW PWS 1 LO *12 Months
Proposed Period of Performance
IAW PWS 1 LO
Contractor Furnished Property
Item No.
Cost Reimbursable No Fee Best Estimated Qty
U/I Unit Price
1 LO
R408 Contractor Furnished Property Contractor Furnished Property IAW PWS para. 4.4.1 dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 1 LO *12 Months
Proposed Period of Performance
IAW PWS 1 LO
DATA
Item No.
Not Separately Priced Best Estimated
DATA
1 LO NSP
DATA
DATA
Provide requested Data IAW the PWS dated 04 August 2022 and applicable DD1423s listed in Attachment 11
Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Exhibit: A Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
+ IAW1423 1 LO *12 Months
Proposed Period of Performance
+ IAW1423 1 LO
Program Management
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 Program Management Program Management IAW Paragraph 4.3 of the PWS dated 04 August 2022
Program Management
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Maintenance Support
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R425 Maintenance Support Maintenance Support Services IAW para. 4.5 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None
Maintenance Support
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Government Furnished Property
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 GFE/GFP Management Consumable/Expendable, Contractor Repair, and MILSTRIP Repair Management of Government Furnished Equipment/Property IAW PWS Para 4.4 dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of
Tearown, Test, and Evaluation (TT&E)
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 Teardown, Test and Evaluation (TT&E) Teardown, Test, and Evaluation IAW para. 4.7.1 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Repair
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
20 EA
R408 Repair Repair IAW para. 4.7 of the PWS dated 04 August 2022
Repair
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 20 EA *12 Months
Proposed Period of Performance
IAW PWS 20 EA
Cybersecurity
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 Cybersecurity Cybersecurity Support IAW Paragraph 6.0 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None
Cybersecurity
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Block Cycle Upgrade
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 Block Cycle Upgrade Block Cycle Upgrade IAW para. 8.1. of PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Engineering Support Services
Item No.
Cost Plus Fixed Fee
Engineering Support Services
Best Estimated Qty
U/I Unit Price
1 LO
R408 Engineering Support Services Engineering Support Services IAW para. 4.6 of PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 1 LO *12 Months
Proposed Period of Performance
IAW PWS 1 LO
Training
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
5 EA
R408 Training Training Requirements as outlined IAW PWS para. 9.0 dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
Training
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 5 EA *12 Months
Proposed Period of Performance
IAW PWS 5 EA
Over and Above
Item No.
Cost Plus Fixed Fee Best Estimated Qty
U/I Unit Price
1 LO
R408 Over and Above Over and Above IAW PWS para. 4.8 dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 1 LO *12 Months
Proposed Period of
Travel
Item No.
Cost Reimbursement - No Fee Best Estimated Qty
U/I Unit Price
1 LO
TRAV
TRAVEL
TRAVEL AS APPROVED IN ADVANCE BY CONTRACTING OFFICER IAW PWS para. 4.9 dated 04 August 2022 TRAVEL IN SUPPORT OF CLINs 3002, 3004, 3005, 3007, 3008, and 3010. TRAVEL REIMBURSED IAW FAR 31.2 and JTR Priority: R ROUTINE Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 1 LO *12 Months
Proposed Period of Performance
IAW PWS 1 LO
Contractor Furnished Property
Item No.
Cost Reimbursable No Fee Best Estimated Qty
U/I Unit Price
1 LO
R408 Contractor Furnished Property Contractor Furnished Property IAW PWS para. 4.4.1 dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required
Contractor Furnished Property
IAW PWS 1 LO *12 Months
Proposed Period of Performance
IAW PWS 1 LO
DATA
Item No.
Not Separately Priced Best Estimated Qty
U/I Unit Price
1 LO NSP
DATA
DATA
Provide requested Data IAW the PWS dated 04 August 2022 and applicable DD1423s listed in Attachment 11
Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Exhibit: A Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
+ IAW1423 1 LO *12 Months
Proposed Period of
+ IAW1423 1 LO
Program Management
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 Program Management Program Management IAW Paragraph 4.3 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Maintenance Support
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R425 Maintenance Support Maintenance Support Services IAW para. 4.5 of the PWS dated 04 August 2022
Maintenance Support
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Government Furnished Property
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 GFE/GFP Management Consumable/Expendable, Contractor Repair, and MILSTRIP Repair Management of Government Furnished Equipment/Property IAW PWS Para 4.4 dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None
Government Furnished Property
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of Performance
IAW PWS 12 MO
Teardown, Test, and Evaluation (TT&E)
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
12 MO
R408 Teardown, Test and Evaluation (TT&E) Teardown, Test, and Evaluation IAW para. 4.7.1 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Class I ODS Substance Application/Use Quantity None none Place of Perf Quantity (U/I) *ARO Contract _ Req No / Pri
Required Period of Performance
IAW PWS 12 MO *12 Months
Proposed Period of
Repair
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price
20 EA
R408 Repair Repair IAW para. 4.7 of the PWS dated 04 August 2022 Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Place…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .