EdgeRailExtrusion201993430.STEP

STEP file 147 KB Posted

Attached to
Next Generation All Aluminum Pallets Federal contract opportunity
Solicitation number
FA8534-19-R-0001
Issued by
Department of the Air Force Materiel Command Lifecycle Management Center Robins Air Force Base

About this file

Written by GovTribe AI ·

This federal contract opportunity notice seeks proposals for the manufacturing and production of aluminum air cargo pallets described in Military Standard MIL-DTL-27443. The Department of the Air Force Materiel Command Lifecycle Management Center at Robins Air Force Base intends to award an indefinite delivery, requirements-type contract with options for up to 18 years. The contractor shall provide 5 first article pallets for testing at the AFMC 802 MXSS/MXDTA facility at Robins AFB within 12 months of award. Production quantities range from 5 to 15,000 pallets per year depending on the contract period. The agency will use tradeoff source selection procedures and consider past performance equally with cost/price in determining best value.

From the source

Edge Rail Extrusion STEP file

Text of this file

ISO-10303-21;

HEADER;

FILE_DESCRIPTION (( 'STEP AP203' ),

'1' );

FILE_NAME ('Edge Rail Extrusion (X201993430).STEP', '2019-04-11T13:18:06', 'SwSTEP 2.0', 'SolidWorks 2017', FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' ));

ENDSEC;

DATA;

#1 = ADVANCED_FACE ( 'NONE', ( #924 ), #1876, .F. ) ;

#2 = CARTESIAN_POINT ( 'NONE', ( -0.3262296689273199200, 13.48293770529216400, 0.0000000000000000000 ) ) ;

#3 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#4 = EDGE_CURVE ( 'NONE', #1125, #1496, #1243, .T. ) ;

#5 = PLANE ( 'NONE', #206 ) ;

#6 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;

#7 = FACE_OUTER_BOUND ( 'NONE', #1027, .T. ) ;

#8 = AXIS2_PLACEMENT_3D ( 'NONE', #1733, #126, #1917 ) ;

#9 = VECTOR ( 'NONE', #633, 39.37007874015748100 ) ;

#10 = CARTESIAN_POINT ( 'NONE', ( -0.9937187602147470300, 13.37565900934925100, 92.00000000000000000 ) ) ;

#11 = VECTOR ( 'NONE', #1379, 39.37007874015748100 ) ;

#12 = VECTOR ( 'NONE', #1509, 39.37007874015748100 ) ;

#13 = ORIENTED_EDGE ( 'NONE', *, *, #1409, .T. ) ;

#14 = EDGE_CURVE ( 'NONE', #1857, #1394, #273, .T. ) ;

#15 = EDGE_LOOP ( 'NONE', ( #1521, #401, #1422, #1597 ) ) ;

#16 = VECTOR ( 'NONE', #1731, 39.37007874015748100 ) ;

#17 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#18 = EDGE_LOOP ( 'NONE', ( #1696, #1369, #1145, #1878 ) ) ;

#19 = ORIENTED_EDGE ( 'NONE', *, *, #1641, .F. ) ;

#20 = ORIENTED_EDGE ( 'NONE', *, *, #1121, .T. ) ;

#21 = ORIENTED_EDGE ( 'NONE', *, *, #838, .T. ) ;

#22 = EDGE_LOOP ( 'NONE', ( #465, #1056, #1908, #1373 ) ) ;

#23 = ADVANCED_FACE ( 'NONE', ( #1174 ), #43, .F. ) ;

#24 = CARTESIAN_POINT ( 'NONE', ( 0.2813218523358038100, 14.02098479015871400, 92.00000000000000000 ) ) ;

#25 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#26 = CARTESIAN_POINT ( 'NONE', ( 0.6482812397853616700, 14.78481730511251300, 92.00000000000000000 ) ) ;

#27 = EDGE_CURVE ( 'NONE', #603, #369, #1051, .T. ) ;

#28 = VECTOR ( 'NONE', #1224, 39.37007874015748100 ) ;

#29 = DIRECTION ( 'NONE', ( -0.9709959029409684900, 0.2390961239164146000, 0.0000000000000000000 ) ) ;

#30 = LINE ( 'NONE', #594, #1895 ) ;

#31 = VECTOR ( 'NONE', #975, 39.37007874015748100 ) ;

#32 = ORIENTED_EDGE ( 'NONE', *, *, #316, .F. ) ;

#33 = ORIENTED_EDGE ( 'NONE', *, *, #329, .F. ) ;

#34 = CYLINDRICAL_SURFACE ( 'NONE', #1228, 0.1559999999999933400 ) ;

#35 = ORIENTED_EDGE ( 'NONE', *, *, #1863, .F. ) ;

#36 = CARTESIAN_POINT ( 'NONE', ( 2.231951140932127300, 14.82496102565729000, 92.00000000000000000 ) ) ;

#37 = EDGE_LOOP ( 'NONE', ( #168, #1264, #94, #1698 ) ) ;

#38 = VERTEX_POINT ( 'NONE', #1388 ) ;

#39 = EDGE_CURVE ( 'NONE', #926, #1399, #601, .T. ) ;

#40 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#41 = CARTESIAN_POINT ( 'NONE', ( -1.056718760214638400, 13.52891932626251600, 92.00000000000000000 ) ) ;

#42 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#43 = PLANE ( 'NONE', #254 ) ;

#44 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#45 = AXIS2_PLACEMENT_3D ( 'NONE', #1870, #2029, #912 ) ;

#46 = DIRECTION ( 'NONE', ( 0.1253519696126066100, 0.9921123342214025500, 0.0000000000000000000 ) ) ;

#47 = CARTESIAN_POINT ( 'NONE', ( 0.4682812058778531600, 13.10599225205451800, 0.0000000000000000000 ) ) ;

#48 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#49 = EDGE_CURVE ( 'NONE', #1677, #1857, #1392, .T. ) ;

#50 = CIRCLE ( 'NONE', #258, 0.1250000000000043600 ) ;

#51 = CARTESIAN_POINT ( 'NONE', ( 3.023258113327429000, 12.27778683104047100, 92.00000000000000000 ) ) ;

#52 = EDGE_CURVE ( 'NONE', #926, #1000, #1420, .T. ) ;

#53 = LINE ( 'NONE', #365, #1943 ) ;

#54 = CARTESIAN_POINT ( 'NONE', ( -0.3481139596137974900, 13.23668067611259500, 0.0000000000000000000 ) ) ;

#55 = VECTOR ( 'NONE', #686, 39.37007874015748100 ) ;

#56 = VECTOR ( 'NONE', #1833, 39.37007874015748100 ) ;

#57 = ORIENTED_EDGE ( 'NONE', *, *, #511, .T. ) ;

#58 = CARTESIAN_POINT ( 'NONE', ( -0.9937187601974018000, -1.288630196524361800E-012, 92.00000000000000000 ) ) ;

#59 = CIRCLE ( 'NONE', #333, 0.1869999999999892900 ) ;

#60 = DIRECTION ( 'NONE', ( 2.556143483915942100E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;

#61 = VERTEX_POINT ( 'NONE', #1093 ) ;

#62 = LINE ( 'NONE', #1894, #654 ) ;

#63 = ORIENTED_EDGE ( 'NONE', *, *, #1988, .F. ) ;

#64 = ORIENTED_EDGE ( 'NONE', *, *, #768, .F. ) ;

#65 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#66 = EDGE_CURVE ( 'NONE', #980, #419, #62, .T. ) ;

#67 = ORIENTED_EDGE ( 'NONE', *, *, #1706, .T. ) ;

#68 = DIRECTION ( 'NONE', ( 0.6018150231520478200, -0.7986355100472932700, 0.0000000000000000000 ) ) ;

#69 = VERTEX_POINT ( 'NONE', #605 ) ;

#70 = EDGE_CURVE ( 'NONE', #1517, #739, #999, .T. ) ;

#71 = CARTESIAN_POINT ( 'NONE', ( 7.870982483765954100, 11.24092794529358500, 92.00000000000000000 ) ) ;

#72 = ADVANCED_FACE ( 'NONE', ( #1927 ), #1714, .F. ) ;

#73 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#74 = DIRECTION ( 'NONE', ( -0.2390961239164299500, -0.9709959029409647200, 0.0000000000000000000 ) ) ;

#75 = AXIS2_PLACEMENT_3D ( 'NONE', #2059, #2082, #1565 ) ;

#76 = DIRECTION ( 'NONE', ( -1.000000000000000000, -7.878742050412695300E-015, 0.0000000000000000000 ) ) ;

#77 = DIRECTION ( 'NONE', ( -1.457994113941970200E-014, -1.000000000000000000, 0.0000000000000000000 ) ) ;

#78 = DIRECTION ( 'NONE', ( 1.457994113941970200E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ;

#79 = EDGE_CURVE ( 'NONE', #444, #1649, #832, .T. ) ;

#80 = FACE_BOUND ( 'NONE', #1727, .T. ) ;

#81 = APPROVAL_STATUS ( 'not_yet_approved' ) ;

#82 = LINE ( 'NONE', #51, #185 ) ;

#83 = CARTESIAN_POINT ( 'NONE', ( 0.04945217052909295400, 12.78503726172554900, 92.00000000000000000 ) ) ;

#84 = VECTOR ( 'NONE', #134, 39.37007874015748900 ) ;

#85 = ORIENTED_EDGE ( 'NONE', *, *, #1460, .F. ) ;

#86 = AXIS2_PLACEMENT_3D ( 'NONE', #384, #1493, #1676 ) ;

#87 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#88 = ORIENTED_EDGE ( 'NONE', *, *, #223, .T. ) ;

#89 = LINE ( 'NONE', #1705, #1748 ) ;

#90 = ORIENTED_EDGE ( 'NONE', *, *, #867, .T. ) ;

#91 = CARTESIAN_POINT ( 'NONE', ( -0.9937187601974018000, -1.288630196524361800E-012, 92.00000000000000000 ) ) ;

#92 = VERTEX_POINT ( 'NONE', #1250 ) ;

#93 = ORIENTED_EDGE ( 'NONE', *, *, #1831, .F. ) ;

#94 = ORIENTED_EDGE ( 'NONE', *, *, #846, .T. ) ;

#95 = VERTEX_POINT ( 'NONE', #1406 ) ;

#96 = EDGE_LOOP ( 'NONE', ( #1932, #1703, #1796, #1346 ) ) ;

#97 = DIRECTION ( 'NONE', ( 0.9986295347545748300, -0.05233595624292371900, 0.0000000000000000000 ) ) ;

#98 = EDGE_CURVE ( 'NONE', #95, #1394, #1080, .T. ) ;

#99 = PLANE ( 'NONE', #327 ) ;

#100 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );

#101 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#102 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#103 = CARTESIAN_POINT ( 'NONE', ( 2.693281239785361600, 0.0000000000000000000, 92.00000000000000000 ) ) ;

#104 = AXIS2_PLACEMENT_3D ( 'NONE', #58, #389, #1797 ) ;

#105 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#106 = LINE ( 'NONE', #1374, #1454 ) ;

#107 = EDGE_CURVE ( 'NONE', #1677, #1131, #673, .T. ) ;

#108 = CARTESIAN_POINT ( 'NONE', ( 2.693281239785150700, -3.926788194797081400E-014, 0.0000000000000000000 ) ) ;

#109 = CARTESIAN_POINT ( 'NONE', ( -1.181718760214644600, 13.32093239929062100, 92.00000000000000000 ) ) ;

#110 = EDGE_CURVE ( 'NONE', #707, #1958, #221, .T. ) ;

#111 = VECTOR ( 'NONE', #346, 39.37007874015748100 ) ;

#112 = LINE ( 'NONE', #715, #416 ) ;

#113 = DIRECTION ( 'NONE', ( 8.001668097024184200E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ;

#114 = EDGE_LOOP ( 'NONE', ( #1267, #930, #1982, #275 ) ) ;

#115 = VECTOR ( 'NONE', #503, 39.37007874015748100 ) ;

#116 = EDGE_LOOP ( 'NONE', ( #1169, #542, #1906, #493, #1151, #1626, #1343, #1173, #1751, #734, #142, #374, #449, #546, #166, #783, #580, #829, #807, #680, #350, #467, #602, #88, #1494, #595 ) ) ;

#117 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#118 = LINE ( 'NONE', #1133, #1147 ) ;

#119 = ORIENTED_EDGE ( 'NONE', *, *, #1513, .T. ) ;

#120 = AXIS2_PLACEMENT_3D ( 'NONE', #634, #610, #129 ) ;

#121 = VERTEX_POINT ( 'NONE', #1236 ) ;

#122 = PLANE ( 'NONE', #1537 ) ;

#123 = ORIENTED_EDGE ( 'NONE', *, *, #641, .T. ) ;

#124 = ORIENTED_EDGE ( 'NONE', *, *, #1233, .F. ) ;

#125 = CARTESIAN_POINT ( 'NONE', ( 2.148281239785359900, 13.08909918920041300, 92.00000000000000000 ) ) ;

#126 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#127 = EDGE_CURVE ( 'NONE', #1803, #779, #974, .T. ) ;

#128 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#129 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#130 = AXIS2_PLACEMENT_3D ( 'NONE', #588, #1552, #1086 ) ;

#131 = CARTESIAN_POINT ( 'NONE', ( 0.04945217052909295400, 12.78503726172554900, 92.00000000000000000 ) ) ;

#132 = FACE_BOUND ( 'NONE', #1397, .T. ) ;

#133 = EDGE_CURVE ( 'NONE', #1651, #568, #1954, .T. ) ;

#134 = DIRECTION ( 'NONE', ( 0.9986295347545748300, -0.05233595624292371900, 0.0000000000000000000 ) ) ;

#135 = FACE_BOUND ( 'NONE', #1398, .T. ) ;

#136 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#137 = EDGE_CURVE ( 'NONE', #1516, #1263, #1775, .T. ) ;

#138 = ORIENTED_EDGE ( 'NONE', *, *, #380, .T. ) ;

#139 = ORIENTED_EDGE ( 'NONE', *, *, #1706, .F. ) ;

#140 = ORIENTED_EDGE ( 'NONE', *, *, #107, .F. ) ;

#141 = VECTOR ( 'NONE', #97, 39.37007874015748900 ) ;

#142 = ORIENTED_EDGE ( 'NONE', *, *, #1073, .F. ) ;

#143 = VERTEX_POINT ( 'NONE', #10 ) ;

#144 = DIRECTION ( 'NONE', ( 0.05233595624292372600, 0.9986295347545749400, -0.0000000000000000000 ) ) ;

#145 = ORIENTED_EDGE ( 'NONE', *, *, #1225, .T. ) ;

#146 = AXIS2_PLACEMENT_3D ( 'NONE', #909, #2035, #931 ) ;

#147 = ORIENTED_EDGE ( 'NONE', *, *, #638, .F. ) ;

#148 = CARTESIAN_POINT ( 'NONE', ( 0.6482812397853591200, -1.159190005256953500E-016, 92.00000000000000000 ) ) ;

#149 = ADVANCED_FACE ( 'NONE', ( #1103 ), #1924, .F. ) ;

#150 = DIRECTION ( 'NONE', ( 0.05233595624292291400, 0.9986295347545750500, -0.0000000000000000000 ) ) ;

#151 = EDGE_CURVE ( 'NONE', #1421, #499, #700, .T. ) ;

#152 = CARTESIAN_POINT ( 'NONE', ( -0.3327716634576857200, 13.35810901344783200, 92.00000000000000000 ) ) ;

#153 = CARTESIAN_POINT ( 'NONE', ( 0.7732812397853617800, 14.78481730511251300, 0.0000000000000000000 ) ) ;

#154 = CARTESIAN_POINT ( 'NONE', ( 2.693281239785366900, 14.82891932626244400, 92.00000000000000000 ) ) ;

#155 = AXIS2_PLACEMENT_3D ( 'NONE', #1396, #1111, #438 ) ;

#156 = PERSON_AND_ORGANIZATION ( #1704, #1533 ) ;

#157 = ADVANCED_FACE ( 'NONE', ( #622 ), #481, .T. ) ;

#158 = VECTOR ( 'NONE', #1248, 39.37007874015748100 ) ;

#159 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#160 = CIRCLE ( 'NONE', #688, 0.1250000000000008600 ) ;

#161 = CARTESIAN_POINT ( 'NONE', ( 2.116669052543316300, 14.88921791233642700, 92.00000000000000000 ) ) ;

#162 = EDGE_CURVE ( 'NONE', #521, #1619, #495, .T. ) ;

#163 = VECTOR ( 'NONE', #361, 39.37007874015748900 ) ;

#164 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#165 = CIRCLE ( 'NONE', #1707, 0.5919999999999999700 ) ;

#166 = ORIENTED_EDGE ( 'NONE', *, *, #606, .T. ) ;

#167 = VECTOR ( 'NONE', #385, 39.37007874015748100 ) ;

#168 = ORIENTED_EDGE ( 'NONE', *, *, #223, .F. ) ;

#169 = ADVANCED_FACE ( 'NONE', ( #397 ), #728, .F. ) ;

#170 = VERTEX_POINT ( 'NONE', #1756 ) ;

#171 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#172 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#173 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#174 = EDGE_CURVE ( 'NONE', #170, #1852, #118, .T. ) ;

#175 = EDGE_CURVE ( 'NONE', #926, #1152, #1339, .T. ) ;

#176 = ADVANCED_FACE ( 'NONE', ( #323 ), #1430, .T. ) ;

#177 = CARTESIAN_POINT ( 'NONE', ( -0.3780009751033490700, 13.11530618824497600, 0.0000000000000000000 ) ) ;

#178 = CARTESIAN_POINT ( 'NONE', ( 0.02823988193395230600, 13.17593402975036600, 92.00000000000000000 ) ) ;

#179 = PERSON_AND_ORGANIZATION ( #1704, #1533 ) ;

#180 = PLANE ( 'NONE', #671 ) ;

#181 = AXIS2_PLACEMENT_3D ( 'NONE', #1414, #1117, #457 ) ;

#182 = CC_DESIGN_APPROVAL ( #1229, ( #704 ) ) ;

#183 = LINE ( 'NONE', #331, #265 ) ;

#184 = CARTESIAN_POINT ( 'NONE', ( 3.023258113327246900, 12.27778683104056700, 92.00000000000000000 ) ) ;

#185 = VECTOR ( 'NONE', #1183, 39.37007874015748100 ) ;

#186 = ORIENTED_EDGE ( 'NONE', *, *, #1303, .F. ) ;

#187 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#188 = FACE_OUTER_BOUND ( 'NONE', #1511, .T. ) ;

#189 = EDGE_LOOP ( 'NONE', ( #376, #1311, #123, #1031 ) ) ;

#190 = EDGE_CURVE ( 'NONE', #672, #520, #2053, .T. ) ;

#191 = EDGE_LOOP ( 'NONE', ( #627, #928, #1306, #1105 ) ) ;

#192 = VECTOR ( 'NONE', #1760, 39.37007874015748100 ) ;

#193 = ORIENTED_EDGE ( 'NONE', *, *, #875, .F. ) ;

#194 = VERTEX_POINT ( 'NONE', #1424 ) ;

#195 = ORIENTED_EDGE ( 'NONE', *, *, #1665, .F. ) ;

#196 = ORIENTED_EDGE ( 'NONE', *, *, #1556, .T. ) ;

#197 = ORIENTED_EDGE ( 'NONE', *, *, #629, .T. ) ;

#198 = ORIENTED_EDGE ( 'NONE', *, *, #190, .T. ) ;

#199 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#200 = AXIS2_PLACEMENT_3D ( 'NONE', #1922, #1937, #480 ) ;

#201 = ADVANCED_FACE ( 'NONE', ( #883 ), #5, .F. ) ;

#202 = CARTESIAN_POINT ( 'NONE', ( 2.488281239785361500, 14.82891932626244400, 92.00000000000000000 ) ) ;

#203 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#204 = EDGE_CURVE ( 'NONE', #1057, #598, #1621, .T. ) ;

#205 = CARTESIAN_POINT ( 'NONE', ( 0.4682812058778531600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#206 = AXIS2_PLACEMENT_3D ( 'NONE', #2069, #1774, #982 ) ;

#207 = VECTOR ( 'NONE', #381, 39.37007874015748100 ) ;

#208 = LINE ( 'NONE', #713, #1687 ) ;

#209 = CARTESIAN_POINT ( 'NONE', ( 0.5932812058778604800, 13.34041455382665100, 0.0000000000000000000 ) ) ;

#210 = FACE_OUTER_BOUND ( 'NONE', #1001, .T. ) ;

#211 = CARTESIAN_POINT ( 'NONE', ( 2.318281239785353600, 14.95391932920243000, 92.00000000000000000 ) ) ;

#212 = AXIS2_PLACEMENT_3D ( 'NONE', #257, #252, #1504 ) ;

#213 = VECTOR ( 'NONE', #674, 39.37007874015748100 ) ;

#214 = ORIENTED_EDGE ( 'NONE', *, *, #175, .T. ) ;

#215 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#216 = EDGE_CURVE ( 'NONE', #1152, #1625, #1983, .T. ) ;

#217 = VECTOR ( 'NONE', #918, 39.37007874015748100 ) ;

#218 = ORIENTED_EDGE ( 'NONE', *, *, #780, .F. ) ;

#219 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#220 = ORIENTED_EDGE ( 'NONE', *, *, #281, .T. ) ;

#221 = CIRCLE ( 'NONE', #575, 0.1249999999999993500 ) ;

#222 = EDGE_LOOP ( 'NONE', ( #1312, #1959, #494, #1718 ) ) ;

#223 = EDGE_CURVE ( 'NONE', #170, #1859, #1283, .T. ) ;

#224 = CARTESIAN_POINT ( 'NONE', ( -0.009059113397005824600, 13.02445866889158300, 92.00000000000000000 ) ) ;

#225 = ORIENTED_EDGE ( 'NONE', *, *, #1435, .F. ) ;

#226 = ORIENTED_EDGE ( 'NONE', *, *, #1807, .F. ) ;

#227 = CARTESIAN_POINT ( 'NONE', ( 0.05299928068521205000, 13.46306315820313800, 92.00000000000000000 ) ) ;

#228 = CARTESIAN_POINT ( 'NONE', ( 0.04483487151131960300, 13.30727695078143000, 92.00000000000000000 ) ) ;

#229 = AXIS2_PLACEMENT_3D ( 'NONE', #1928, #3, #1444 ) ;

#230 = CARTESIAN_POINT ( 'NONE', ( 2.122623677539706000, 14.76435982312652200, 0.0000000000000000000 ) ) ;

#231 = DIRECTION ( 'NONE', ( 0.8191520442890191100, -0.5735764363510070800, 0.0000000000000000000 ) ) ;

#232 = CARTESIAN_POINT ( 'NONE', ( 0.4682812058778531600, 13.29326068231989700, 92.00000000000000000 ) ) ;

#233 = ADVANCED_FACE ( 'NONE', ( #445 ), #1567, .F. ) ;

#234 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 13.65391932626251600, 0.0000000000000000000 ) ) ;

#235 = EDGE_CURVE ( 'NONE', #903, #1958, #375, .T. ) ;

#236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#237 = CARTESIAN_POINT ( 'NONE', ( -0.9937187601974018000, -1.288630196524361800E-012, 0.0000000000000000000 ) ) ;

#238 = VECTOR ( 'NONE', #682, 39.37007874015748100 ) ;

#239 = AXIS2_PLACEMENT_3D ( 'NONE', #1120, #1787, #17 ) ;

#240 = LINE ( 'NONE', #1688, #1141 ) ;

#241 = DATE_TIME_ROLE ( 'classification_date' ) ;

#242 = LINE ( 'NONE', #1719, #84 ) ;

#243 = VERTEX_POINT ( 'NONE', #1952 ) ;

#244 = ADVANCED_FACE ( 'NONE', ( #1851 ), #679, .F. ) ;

#245 = ORIENTED_EDGE ( 'NONE', *, *, #890, .T. ) ;

#246 = VECTOR ( 'NONE', #1829, 39.37007874015748100 ) ;

#247 = ORIENTED_EDGE ( 'NONE', *, *, #2038, .T. ) ;

#248 = EDGE_LOOP ( 'NONE', ( #2030, #727, #2051, #853 ) ) ;

#249 = VERTEX_POINT ( 'NONE', #177 ) ;

#250 = VERTEX_POINT ( 'NONE', #662 ) ;

#251 = ORIENTED_EDGE ( 'NONE', *, *, #2061, .F. ) ;

#252 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#253 = ORIENTED_EDGE ( 'NONE', *, *, #2023, .T. ) ;

#254 = AXIS2_PLACEMENT_3D ( 'NONE', #1480, #1562, #733 ) ;

#255 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#256 = CARTESIAN_POINT ( 'NONE', ( 2.273281239785358600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#257 = CARTESIAN_POINT ( 'NONE', ( -0.8587187602147405800, 13.37565900934922600, 92.00000000000000000 ) ) ;

#258 = AXIS2_PLACEMENT_3D ( 'NONE', #2067, #1497, #856 ) ;

#259 = PLANE ( 'NONE', #1858 ) ;

#260 = CARTESIAN_POINT ( 'NONE', ( 2.318281239785353600, 14.95391932920243000, 0.0000000000000000000 ) ) ;

#261 = VECTOR ( 'NONE', #791, 39.37007874015748100 ) ;

#262 = EDGE_CURVE ( 'NONE', #1131, #1394, #1545, .T. ) ;

#263 = FACE_OUTER_BOUND ( 'NONE', #248, .T. ) ;

#264 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ;

#265 = VECTOR ( 'NONE', #483, 39.37007874015748100 ) ;

#266 = VECTOR ( 'NONE', #694, 39.37007874015748100 ) ;

#267 = AXIS2_PLACEMENT_3D ( 'NONE', #1156, #1650, #1308 ) ;

#268 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#269 = VECTOR ( 'NONE', #1579, 39.37007874015748100 ) ;

#270 = ORIENTED_EDGE ( 'NONE', *, *, #1641, .T. ) ;

#271 = CARTESIAN_POINT ( 'NONE', ( -0.3262296689273199200, 13.48293770529216400, 92.00000000000000000 ) ) ;

#272 = ORIENTED_EDGE ( 'NONE', *, *, #380, .F. ) ;

#273 = LINE ( 'NONE', #719, #167 ) ;

#274 = EDGE_LOOP ( 'NONE', ( #1200, #833, #1678, #1540 ) ) ;

#275 = ORIENTED_EDGE ( 'NONE', *, *, #1460, .T. ) ;

#276 = CARTESIAN_POINT ( 'NONE', ( -0.2240999178361226000, 13.22101167991101900, 0.0000000000000000000 ) ) ;

#277 = ORIENTED_EDGE ( 'NONE', *, *, #1886, .F. ) ;

#278 = EDGE_CURVE ( 'NONE', #785, #630, #294, .T. ) ;

#279 = ORIENTED_EDGE ( 'NONE', *, *, #987, .T. ) ;

#280 = DIRECTION ( 'NONE', ( -0.8191520442889876900, -0.5735764363510519300, 0.0000000000000000000 ) ) ;

#281 = EDGE_CURVE ( 'NONE', #440, #1749, #2031, .T. ) ;

#282 = CARTESIAN_POINT ( 'NONE', ( -0.8587187602147405800, 13.37270970391462100, 92.00000000000000000 ) ) ;

#283 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#284 = LINE ( 'NONE', #103, #28 ) ;

#285 = CARTESIAN_POINT ( 'NONE', ( 0.04483487151131960300, 13.30727695078143000, 0.0000000000000000000 ) ) ;

#286 = EDGE_CURVE ( 'NONE', #630, #831, #1077, .T. ) ;

#287 = CIRCLE ( 'NONE', #469, 0.1869999999999892900 ) ;

#288 = VECTOR ( 'NONE', #583, 39.37007874015748100 ) ;

#289 = CARTESIAN_POINT ( 'NONE', ( 2.117626791544234200, 12.91804575904026500, 0.0000000000000000000 ) ) ;

#290 = VECTOR ( 'NONE', #647, 39.37007874015748100 ) ;

#291 = ORIENTED_EDGE ( 'NONE', *, *, #1549, .F. ) ;

#292 = CARTESIAN_POINT ( 'NONE', ( 0.04945217052909295400, 12.78503726172554900, 0.0000000000000000000 ) ) ;

#293 = ORIENTED_EDGE ( 'NONE', *, *, #1295, .T. ) ;

#294 = LINE ( 'NONE', #685, #809 ) ;

#295 = VERTEX_POINT ( 'NONE', #202 ) ;

#296 = AXIS2_PLACEMENT_3D ( 'NONE', #1063, #911, #1214 ) ;

#297 = ORIENTED_EDGE ( 'NONE', *, *, #638, .T. ) ;

#298 = CC_DESIGN_APPROVAL ( #1581, ( #1405 ) ) ;

#299 = CARTESIAN_POINT ( 'NONE', ( -1.184089786680838400E-013, 15.02891932626243100, 92.00000000000000000 ) ) ;

#300 = ORIENTED_EDGE ( 'NONE', *, *, #4, .F. ) ;

#301 = ORIENTED_EDGE ( 'NONE', *, *, #1807, .T. ) ;

#302 = ORIENTED_EDGE ( 'NONE', *, *, #1233, .T. ) ;

#303 = CARTESIAN_POINT ( 'NONE', ( 2.257608703177824700, 13.02849798666969500, 92.00000000000000000 ) ) ;

#304 = VERTEX_POINT ( 'NONE', #1964 ) ;

#305 = EDGE_CURVE ( 'NONE', #1496, #243, #540, .T. ) ;

#306 = CARTESIAN_POINT ( 'NONE', ( 0.9313349601968988800, 14.90391932626244300, 0.0000000000000000000 ) ) ;

#307 = ADVANCED_FACE ( 'NONE', ( #1389 ), #34, .F. ) ;

#308 = PERSON_AND_ORGANIZATION ( #1704, #1533 ) ;

#309 = CARTESIAN_POINT ( 'NONE', ( 2.148281239785361700, 14.71807235555150800, 92.00000000000000000 ) ) ;

#310 = PERSON_AND_ORGANIZATION ( #1704, #1533 ) ;

#311 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#312 = FACE_OUTER_BOUND ( 'NONE', #1340, .T. ) ;

#313 = EDGE_CURVE ( 'NONE', #628, #808, #1334, .T. ) ;

#314 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#315 = VECTOR ( 'NONE', #231, 39.37007874015748100 ) ;

#316 = EDGE_CURVE ( 'NONE', #1647, #2008, #165, .T. ) ;

#317 = CARTESIAN_POINT ( 'NONE', ( 0.8732812397853728600, 6.987706636120344300E-016, 92.00000000000000000 ) ) ;

#318 = CIRCLE ( 'NONE', #1130, 0.1249999999999750300 ) ;

#319 = EDGE_LOOP ( 'NONE', ( #124, #1489, #421, #1081 ) ) ;

#320 = ADVANCED_FACE ( 'NONE', ( #828 ), #830, .T. ) ;

#321 = CARTESIAN_POINT ( 'NONE', ( -0.8516534061219495100, 13.51047399654111900, 92.00000000000000000 ) ) ;

#322 = VECTOR ( 'NONE', #73, 39.37007874015748100 ) ;

#323 = FACE_OUTER_BOUND ( 'NONE', #398, .T. ) ;

#324 = CARTESIAN_POINT ( 'NONE', ( -0.3327716634576857200, 13.35810901344783200, 92.00000000000000000 ) ) ;

#325 = ORIENTED_EDGE ( 'NONE', *, *, #1429, .F. ) ;

#326 = ORIENTED_EDGE ( 'NONE', *, *, #1734, .F. ) ;

#327 = AXIS2_PLACEMENT_3D ( 'NONE', #1193, #563, #78 ) ;

#328 = DIRECTION ( 'NONE', ( 1.000000000000000000, 8.001668097024184200E-016, -0.0000000000000000000 ) ) ;

#329 = EDGE_CURVE ( 'NONE', #92, #1218, #879, .T. ) ;

#330 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#331 = CARTESIAN_POINT ( 'NONE', ( -6.901198134545317100, 9.158199247424811100, 0.0000000000000000000 ) ) ;

#332 = CARTESIAN_POINT ( 'NONE', ( -0.1099346526272045500, 13.32683185804107100, 92.00000000000000000 ) ) ;

#333 = AXIS2_PLACEMENT_3D ( 'NONE', #2001, #1020, #1345 ) ;

#334 = FACE_OUTER_BOUND ( 'NONE', #1291, .T. ) ;

#335 = DIRECTION ( 'NONE', ( -0.9988647136793632500, -0.04763699997106977300, 0.0000000000000000000 ) ) ;

#337 = ADVANCED_FACE ( 'NONE', ( #1281 ), #991, .F. ) ;

#336 = VECTOR ( 'NONE', #637, 39.37007874015748100 ) ;

#338 = CARTESIAN_POINT ( 'NONE', ( 2.318281239785359400, 12.77891932626244800, 92.00000000000000000 ) ) ;

#339 = EDGE_CURVE ( 'NONE', #194, #1749, #59, .T. ) ;

#340 = VECTOR ( 'NONE', #76, 39.37007874015748100 ) ;

#341 = VECTOR ( 'NONE', #858, 39.37007874015748100 ) ;

#342 = VERTEX_POINT ( 'NONE', #1992 ) ;

#343 = ORIENTED_EDGE ( 'NONE', *, *, #1061, .T. ) ;

#344 = VECTOR ( 'NONE', #42, 39.37007874015748100 ) ;

#345 = ORIENTED_EDGE ( 'NONE', *, *, #1609, .T. ) ;

#346 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#347 = ORIENTED_EDGE ( 'NONE', *, *, #1225, .F. ) ;

#348 = VERTEX_POINT ( 'NONE', #379 ) ;

#349 = AXIS2_PLACEMENT_3D ( 'NONE', #639, #1451, #810 ) ;

#350 = ORIENTED_EDGE ( 'NONE', *, *, #1528, .F. ) ;

#351 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;

#352 = ORIENTED_EDGE ( 'NONE', *, *, #1472, .F. ) ;

#353 = ADVANCED_FACE ( 'NONE', ( #1717 ), #1653, .T. ) ;

#354 = CARTESIAN_POINT ( 'NONE', ( -1.181718760215038300, 3.492345004626923700E-014, 0.0000000000000000000 ) ) ;

#355 = CARTESIAN_POINT ( 'NONE', ( 2.488281239785361100, 13.10844526853865600, 92.00000000000000000 ) ) ;

#356 = EDGE_CURVE ( 'NONE', #61, #976, #1821, .T. ) ;

#357 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#358 = DATE_AND_TIME ( #989, #1837 ) ;

#359 = CARTESIAN_POINT ( 'NONE', ( 0.9923266147889764400, 14.83559673627397000, 0.0000000000000000000 ) ) ;

#360 = DATE_AND_TIME ( #1475, #1738 ) ;

#361 = DIRECTION ( 'NONE', ( -0.4848096202456977900, -0.8746197071397501200, 0.0000000000000000000 ) ) ;

#362 = AXIS2_PLACEMENT_3D ( 'NONE', #965, #1465, #1294 ) ;

#363 = LINE ( 'NONE', #1548, #2021 ) ;

#364 = CIRCLE ( 'NONE', #1107, 0.1249999999999985300 ) ;

#365 = CARTESIAN_POINT ( 'NONE', ( -1.765575161107041400, 0.2230778877660258300, 0.0000000000000000000 ) ) ;

#366 = VECTOR ( 'NONE', #314, 39.37007874015748100 ) ;

#367 = ORIENTED_EDGE ( 'NONE', *, *, #612, .F. ) ;

#368 = EDGE_CURVE ( 'NONE', #1667, #573, #597, .T. ) ;

#369 = VERTEX_POINT ( 'NONE', #534 ) ;

#370 = CARTESIAN_POINT ( 'NONE', ( 0.3122812058778587400, 13.29326068231989700, 0.0000000000000000000 ) ) ;

#371 = LINE ( 'NONE', #1813, #1307 ) ;

#372 = CARTESIAN_POINT ( 'NONE', ( -3.797416933633937800, 2.104942578449682200, 92.00000000000000000 ) ) ;

#373 = ORIENTED_EDGE ( 'NONE', *, *, #910, .F. ) ;

#374 = ORIENTED_EDGE ( 'NONE', *, *, #1295, .F. ) ;

#375 = LINE ( 'NONE', #1157, #344 ) ;

#376 = ORIENTED_EDGE ( 'NONE', *, *, #1272, .F. ) ;

#377 = ORIENTED_EDGE ( 'NONE', *, *, #908, .F. ) ;

#378 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#379 = CARTESIAN_POINT ( 'NONE', ( -0.1099346526272045500, 13.32683185804107100, 0.0000000000000000000 ) ) ;

#380 = EDGE_CURVE ( 'NONE', #860, #956, #1026, .T. ) ;

#381 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#382 = CARTESIAN_POINT ( 'NONE', ( -0.7036691172997907600, 14.75471276116302400, 92.00000000000000000 ) ) ;

#383 = EDGE_CURVE ( 'NONE', #61, #1175, #1542, .T. ) ;

#384 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.98344526853865800, 92.00000000000000000 ) ) ;

#385 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#386 = FACE_OUTER_BOUND ( 'NONE', #1675, .T. ) ;

#387 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#388 = LINE ( 'NONE', #321, #1663 ) ;

#389 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.296775554753918600E-012, -0.0000000000000000000 ) ) ;

#390 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.642464134336091200E-015, 0.0000000000000000000 ) ) ;

#391 = ORIENTED_EDGE ( 'NONE', *, *, #751, .T. ) ;

#392 = CARTESIAN_POINT ( 'NONE', ( 0.2812812397853641800, 13.65391932626251600, 92.00000000000000000 ) ) ;

#393 = CIRCLE ( 'NONE', #1991, 0.1249999999999987400 ) ;

#394 = ORIENTED_EDGE ( 'NONE', *, *, #1380, .F. ) ;

#395 = CARTESIAN_POINT ( 'NONE', ( -6.901198134545317100, 9.158199247424811100, 92.00000000000000000 ) ) ;

#396 = ORIENTED_EDGE ( 'NONE', *, *, #1338, .T. ) ;

#397 = FACE_OUTER_BOUND ( 'NONE', #2083, .T. ) ;

#398 = EDGE_LOOP ( 'NONE', ( #1643, #140, #1108, #1487 ) ) ;

#399 = ORIENTED_EDGE ( 'NONE', *, *, #98, .T. ) ;

#400 = EDGE_CURVE ( 'NONE', #1516, #419, #1669, .T. ) ;

#401 = ORIENTED_EDGE ( 'NONE', *, *, #1352, .F. ) ;

#402 = EDGE_LOOP ( 'NONE', ( #1446, #1390, #1084, #67 ) ) ;

#403 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#404 = CARTESIAN_POINT ( 'NONE', ( -1.252265614835453200E-014, 12.77891932626244700, 0.0000000000000000000 ) ) ;

#405 = AXIS2_PLACEMENT_3D ( 'NONE', #1658, #708, #1636 ) ;

#406 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #2019, #1506, ( #1913 ) ) ;

#407 = DIRECTION ( 'NONE', ( 1.296775554753918600E-012, -1.000000000000000000, 0.0000000000000000000 ) ) ;

#408 = EDGE_CURVE ( 'NONE', #1046, #1803, #1772, .T. ) ;

#409 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#410 = DIRECTION ( 'NONE', ( -0.4848096202463241200, 0.8746197071394028500, 0.0000000000000000000 ) ) ;

#411 = APPROVAL_PERSON_ORGANIZATION ( #156, #1229, #1697 ) ;

#412 = CARTESIAN_POINT ( 'NONE', ( 2.693281239785367800, 14.86639338692621800, 92.00000000000000000 ) ) ;

#413 = LINE ( 'NONE', #1679, #1559 ) ;

#414 = AXIS2_PLACEMENT_3D ( 'NONE', #1944, #839, #986 ) ;

#415 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#416 = VECTOR ( 'NONE', #1502, 39.37007874015748100 ) ;

#417 = LINE ( 'NONE', #1809, #1119 ) ;

#418 = CARTESIAN_POINT ( 'NONE', ( -0.1277601180660399000, 13.17593402975036600, 92.00000000000000000 ) ) ;

#419 = VERTEX_POINT ( 'NONE', #1047 ) ;

#420 = LINE ( 'NONE', #1355, #217 ) ;

#421 = ORIENTED_EDGE ( 'NONE', *, *, #151, .T. ) ;

#422 = EDGE_CURVE ( 'NONE', #573, #249, #393, .T. ) ;

#423 = ORIENTED_EDGE ( 'NONE', *, *, #1655, .F. ) ;

#424 = ORIENTED_EDGE ( 'NONE', *, *, #1257, .T. ) ;

#425 = VERTEX_POINT ( 'NONE', #712 ) ;

#426 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#427 = EDGE_CURVE ( 'NONE', #1046, #959, #468, .T. ) ;

#428 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#429 = DIRECTION ( 'NONE', ( 9.799464124183601300E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ;

#430 = AXIS2_PLACEMENT_3D ( 'NONE', #936, #150, #943 ) ;

#431 = CARTESIAN_POINT ( 'NONE', ( 0.3204456150517510600, 13.44904688974160400, 92.00000000000000000 ) ) ;

#432 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#433 = CARTESIAN_POINT ( 'NONE', ( 0.02823988193395230600, 13.17593402975036600, 92.00000000000000000 ) ) ;

#434 = EDGE_CURVE ( 'NONE', #1619, #2027, #972, .T. ) ;

#435 = CARTESIAN_POINT ( 'NONE', ( 2.273281239785358600, 0.0000000000000000000, 92.00000000000000000 ) ) ;

#436 = VECTOR ( 'NONE', #585, 39.37007874015748100 ) ;

#437 = LINE ( 'NONE', #1254, #336 ) ;

#438 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.748382715945116500E-014, 0.0000000000000000000 ) ) ;

#439 = FACE_OUTER_BOUND ( 'NONE', #760, .T. ) ;

#440 = VERTEX_POINT ( 'NONE', #1681 ) ;

#441 = FACE_OUTER_BOUND ( 'NONE', #274, .T. ) ;

#442 = ORIENTED_EDGE ( 'NONE', *, *, #1790, .F. ) ;

#443 = DIRECTION ( 'NONE', ( -0.8191520442890191100, 0.5735764363510070800, 0.0000000000000000000 ) ) ;

#444 = VERTEX_POINT ( 'NONE', #1184 ) ;

#445 = FACE_OUTER_BOUND ( 'NONE', #884, .T. ) ;

#446 = ORIENTED_EDGE ( 'NONE', *, *, #1815, .F. ) ;

#447 = ORIENTED_EDGE ( 'NONE', *, *, #962, .F. ) ;

#448 = PLANE ( 'NONE', #1659 ) ;

#449 = ORIENTED_EDGE ( 'NONE', *, *, #987, .F. ) ;

#450 = EDGE_LOOP ( 'NONE', ( #1344, #547, #1106, #1076 ) ) ;

#451 = EDGE_CURVE ( 'NONE', #69, #2027, #371, .T. ) ;

#452 = ORIENTED_EDGE ( 'NONE', *, *, #1549, .T. ) ;

#453 = DIRECTION ( 'NONE', ( -0.4848096202456977900, -0.8746197071397501200, 0.0000000000000000000 ) ) ;

#454 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;

#455 = AXIS2_PLACEMENT_3D ( 'NONE', #872, #48, #554 ) ;

#456 = CARTESIAN_POINT ( 'NONE', ( 0.02823988193395230600, 13.17593402975036600, 92.00000000000000000 ) ) ;

#457 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#458 = CARTESIAN_POINT ( 'NONE', ( 2.148281239785361700, 14.71807235555150800, 0.0000000000000000000 ) ) ;

#459 = VECTOR ( 'NONE', #1187, 39.37007874015748100 ) ;

#460 = AXIS2_PLACEMENT_3D ( 'NONE', #1099, #1888, #280 ) ;

#461 = CYLINDRICAL_SURFACE ( 'NONE', #1195, 0.1559999999999922000 ) ;

#462 = CARTESIAN_POINT ( 'NONE', ( 7.993492510370524300, 4.430865251218143900, 92.00000000000000000 ) ) ;

#463 = CIRCLE ( 'NONE', #1966, 0.1250000000000003100 ) ;

#464 = CIRCLE ( 'NONE', #349, 0.3669999999999974900 ) ;

#465 = ORIENTED_EDGE ( 'NONE', *, *, #1926, .T. ) ;

#466 = PLANE ( 'NONE', #1524 ) ;

#467 = ORIENTED_EDGE ( 'NONE', *, *, #2048, .F. ) ;

#468 = LINE ( 'NONE', #1499, #1363 ) ;

#469 = AXIS2_PLACEMENT_3D ( 'NONE', #615, #797, #1916 ) ;

#470 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #310, #895, ( #704 ) ) ;

#471 = ORIENTED_EDGE ( 'NONE', *, *, #1211, .F. ) ;

#472 = ORIENTED_EDGE ( 'NONE', *, *, #1043, .F. ) ;

#473 = ORIENTED_EDGE ( 'NONE', *, *, #278, .F. ) ;

#474 = PLANE ( 'NONE', #430 ) ;

#475 = CARTESIAN_POINT ( 'NONE', ( 2.231951140932127300, 14.82496102565729000, 92.00000000000000000 ) ) ;

#476 = EDGE_CURVE ( 'NONE', #1240, #250, #1695, .T. ) ;

#477 = ADVANCED_FACE ( 'NONE', ( #2050 ), #878, .F. ) ;

#478 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#479 = CARTESIAN_POINT ( 'NONE', ( 2.231951140932127300, 14.82496102565729000, 0.0000000000000000000 ) ) ;

#480 = DIRECTION ( 'NONE', ( 0.9510565162951460900, -0.3090169943749703200, 0.0000000000000000000 ) ) ;

#481 = PLANE ( 'NONE', #1009 ) ;

#482 = LOCAL_TIME ( 9, 18, 6.000000000000000000, #1324 ) ;

#483 = DIRECTION ( 'NONE', ( -0.7986355100472932700, -0.6018150231520477100, 0.0000000000000000000 ) ) ;

#484 = CIRCLE ( 'NONE', #771, 0.1249999999999993500 ) ;

#485 = EDGE_CURVE ( 'NONE', #1046, #440, #89, .T. ) ;

#486 = CARTESIAN_POINT ( 'NONE', ( 0.9313349601968988800, 14.90391932626244300, 92.00000000000000000 ) ) ;

#487 = CYLINDRICAL_SURFACE ( 'NONE', #651, 0.1249999999999911600 ) ;

#488 = EDGE_CURVE ( 'NONE', #860, #598, #754, .T. ) ;

#489 = LINE ( 'NONE', #1349, #2070 ) ;

#490 = ORIENTED_EDGE ( 'NONE', *, *, #14, .F. ) ;

#491 = DIRECTION ( 'NONE', ( 0.9988647136793632500, 0.04763699997106977300, 0.0000000000000000000 ) ) ;

#492 = VECTOR ( 'NONE', #1015, 39.37007874015748100 ) ;

#493 = ORIENTED_EDGE ( 'NONE', *, *, #659, .T. ) ;

#494 = ORIENTED_EDGE ( 'NONE', *, *, #1158, .T. ) ;

#495 = LINE ( 'NONE', #1933, #192 ) ;

#496 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#497 = ORIENTED_EDGE ( 'NONE', *, *, #133, .T. ) ;

#498 = ADVANCED_FACE ( 'NONE', ( #441 ), #1880, .F. ) ;

#499 = VERTEX_POINT ( 'NONE', #762 ) ;

#500 = ORIENTED_EDGE ( 'NONE', *, *, #383, .F. ) ;

#501 = CARTESIAN_POINT ( 'NONE', ( 2.148281239785361700, 14.71807235555150800, 92.00000000000000000 ) ) ;

#502 = EDGE_CURVE ( 'NONE', #1240, #1175, #572, .T. ) ;

#503 = DIRECTION ( 'NONE', ( 0.8191520442889876900, 0.5735764363510519300, 0.0000000000000000000 ) ) ;

#504 = AXIS2_PLACEMENT_3D ( 'NONE', #1628, #1940, #984 ) ;

#505 = PERSON_AND_ORGANIZATION ( #1704, #1533 ) ;

#506 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #1016, #552, ( #1913 ) ) ;

#507 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 5, 0, .BEHIND. ) ;

#508 = DIRECTION ( 'NONE', ( -2.955309776068393200E-014, -1.000000000000000000, 0.0000000000000000000 ) ) ;

#509 = LINE ( 'NONE', #1732, #1791 ) ;

#510 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#511 = EDGE_CURVE ( 'NONE', #1647, #521, #1262, .T. ) ;

#512 = LINE ( 'NONE', #71, #315 ) ;

#513 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.85891932626244300, 92.00000000000000000 ) ) ;

#514 = CYLINDRICAL_SURFACE ( 'NONE', #8, 0.1250000000000003100 ) ;

#515 = ORIENTED_EDGE ( 'NONE', *, *, #2061, .T. ) ;

#516 = EDGE_LOOP ( 'NONE', ( #1701, #300, #119, #732 ) ) ;

#517 = VECTOR ( 'NONE', #1011, 39.37007874015748100 ) ;

#518 = ORIENTED_EDGE ( 'NONE', *, *, #1655, .T. ) ;

#519 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.65391932626251600, 92.00000000000000000 ) ) ;

#520 = VERTEX_POINT ( 'NONE', #1527 ) ;

#521 = VERTEX_POINT ( 'NONE', #599 ) ;

#522 = AXIS2_PLACEMENT_3D ( 'NONE', #2012, #65, #717 ) ;

#523 = CARTESIAN_POINT ( 'NONE', ( 2.273281239785358600, 14.71807235555148300, 92.00000000000000000 ) ) ;

#524 = ORIENTED_EDGE ( 'NONE', *, *, #1782, .F. ) ;

#525 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#526 = CARTESIAN_POINT ( 'NONE', ( 2.273281239785358600, 13.08909918920041300, 0.0000000000000000000 ) ) ;

#527 = EDGE_CURVE ( 'NONE', #1399, #1691, #857, .T. ) ;

#528 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#529 = EDGE_CURVE ( 'NONE', #1131, #2027, #950, .T. ) ;

#530 = APPROVAL_PERSON_ORGANIZATION ( #179, #2033, #1062 ) ;

#531 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.98344526853865800, 92.00000000000000000 ) ) ;

#532 = AXIS2_PLACEMENT_3D ( 'NONE', #1935, #1143, #823 ) ;

#533 = CYLINDRICAL_SURFACE ( 'NONE', #1981, 0.1350000000000060600 ) ;

#534 = CARTESIAN_POINT ( 'NONE', ( 2.693281239785366900, 14.82891932626244400, 92.00000000000000000 ) ) ;

#535 = CYLINDRICAL_SURFACE ( 'NONE', #1090, 0.1559999999999922000 ) ;

#536 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 14.82891932626244400, 92.00000000000000000 ) ) ;

#537 = LINE ( 'NONE', #154, #1538 ) ;

#538 = EDGE_CURVE ( 'NONE', #1722, #1619, #1798, .T. ) ;

#539 = CARTESIAN_POINT ( 'NONE', ( 2.257608703177824700, 13.02849798666969500, 0.0000000000000000000 ) ) ;

#540 = CIRCLE ( 'NONE', #1383, 0.1350000000000060600 ) ;

#541 = VECTOR ( 'NONE', #609, 39.37007874015748100 ) ;

#542 = ORIENTED_EDGE ( 'NONE', *, *, #339, .T. ) ;

#543 = ORIENTED_EDGE ( 'NONE', *, *, #1158, .F. ) ;

#544 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#545 = ORIENTED_EDGE ( 'NONE', *, *, #813, .F. ) ;

#546 = ORIENTED_EDGE ( 'NONE', *, *, #70, .T. ) ;

#547 = ORIENTED_EDGE ( 'NONE', *, *, #1061, .F. ) ;

#548 = ADVANCED_FACE ( 'NONE', ( #1485 ), #2020, .T. ) ;

#549 = CARTESIAN_POINT ( 'NONE', ( 0.7018802156211160200, 13.60433786160795600, 92.00000000000000000 ) ) ;

#550 = AXIS2_PLACEMENT_3D ( 'NONE', #1216, #584, #1210 ) ;

#551 = ORIENTED_EDGE ( 'NONE', *, *, #98, .F. ) ;

#552 = DATE_TIME_ROLE ( 'creation_date' ) ;

#553 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#554 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#555 = CARTESIAN_POINT ( 'NONE', ( -1.056718760214637500, 13.65391932626251600, 92.00000000000000000 ) ) ;

#556 = EDGE_CURVE ( 'NONE', #1152, #2081, #649, .T. ) ;

#557 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ;

#558 = CARTESIAN_POINT ( 'NONE', ( 2.318281239785358900, 12.85891932626244300, 92.00000000000000000 ) ) ;

#559 = CALENDAR_DATE ( 2019, 11, 4 ) ;

#560 = CARTESIAN_POINT ( 'NONE', ( -0.2240999178361226000, 13.22101167991101900, 92.00000000000000000 ) ) ;

#561 = AXIS2_PLACEMENT_3D ( 'NONE', #513, #351, #1799 ) ;

#562 = CIRCLE ( 'NONE', #1469, 0.1559999999999933700 ) ;

#563 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.457994113941970200E-014, 0.0000000000000000000 ) ) ;

#564 = CYLINDRICAL_SURFACE ( 'NONE', #1053, 0.1869999999999892900 ) ;

#565 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#566 = FACE_BOUND ( 'NONE', #1598, .T. ) ;

#567 = LINE ( 'NONE', #1602, #290 ) ;

#568 = VERTEX_POINT ( 'NONE', #1206 ) ;

#569 = CARTESIAN_POINT ( 'NONE', ( 0.3122812058778587900, 13.10599225205451800, 92.00000000000000000 ) ) ;

#570 = ORIENTED_EDGE ( 'NONE', *, *, #1637, .F. ) ;

#571 = EDGE_LOOP ( 'NONE', ( #1825, #347, #1083, #13 ) ) ;

#572 = LINE ( 'NONE', #2015, #141 ) ;

#573 = VERTEX_POINT ( 'NONE', #276 ) ;

#574 = VERTEX_POINT ( 'NONE', #1386 ) ;

#575 = AXIS2_PLACEMENT_3D ( 'NONE', #1110, #1251, #403 ) ;

#576 = CARTESIAN_POINT ( 'NONE', ( -1.181718760214638400, 13.52891932626251400, 92.00000000000000000 ) ) ;

#577 = ORIENTED_EDGE ( 'NONE', *, *, #1172, .T. ) ;

#578 = VERTEX_POINT ( 'NONE', #260 ) ;

#579 = VERTEX_POINT ( 'NONE', #1523 ) ;

#580 = ORIENTED_EDGE ( 'NONE', *, *, #110, .T. ) ;

#581 = AXIS2_PLACEMENT_3D ( 'NONE', #1761, #1739, #1247 ) ;

#582 = CARTESIAN_POINT ( 'NONE', ( 2.257608703177787400, 14.77867355808227000, 0.0000000000000000000 ) ) ;

#583 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#584 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#585 = DIRECTION ( 'NONE', ( -1.000000000000000000, -9.799464124183601300E-016, 0.0000000000000000000 ) ) ;

#586 = EDGE_CURVE ( 'NONE', #1951, #1800, #420, .T. ) ;

#587 = CARTESIAN_POINT ( 'NONE', ( -1.765575161107041400, 0.2230778877660258300, 92.00000000000000000 ) ) ;

#588 = CARTESIAN_POINT ( 'NONE', ( 0.9682812058778588200, 13.34041455382665100, 0.0000000000000000000 ) ) ;

#589 = FACE_OUTER_BOUND ( 'NONE', #15, .T. ) ;

#590 = AXIS2_PLACEMENT_3D ( 'NONE', #1498, #1526, #255 ) ;

#591 = CARTESIAN_POINT ( 'NONE', ( 2.318281239785359400, 12.77891932626244800, 0.0000000000000000000 ) ) ;

#592 = CYLINDRICAL_SURFACE ( 'NONE', #181, 0.1249999999999987400 ) ;

#593 = VECTOR ( 'NONE', #496, 39.37007874015748100 ) ;

#594 = CARTESIAN_POINT ( 'NONE', ( 2.318281239785407800, 8.444256269222555800E-015, 92.00000000000000000 ) ) ;

#595 = ORIENTED_EDGE ( 'NONE', *, *, #751, .F. ) ;

#596 = PRODUCT ( 'Edge Rail Extrusion (X201993430)', 'Edge Rail Extrusion (X201993430)', '', ( #1055 ) ) ;

#597 = LINE ( 'NONE', #560, #12 ) ;

#598 = VERTEX_POINT ( 'NONE', #740 ) ;

#599 = CARTESIAN_POINT ( 'NONE', ( 0.5932812058778604800, 13.34041455382665100, 92.00000000000000000 ) ) ;

#600 = EDGE_CURVE ( 'NONE', #1930, #730, #1646, .T. ) ;

#601 = LINE ( 'NONE', #1682, #16 ) ;

#602 = ORIENTED_EDGE ( 'NONE', *, *, #174, .F. ) ;

#603 = VERTEX_POINT ( 'NONE', #412 ) ;

#604 = CARTESIAN_POINT ( 'NONE', ( 2.568281239785354900, 14.95391932920243000, 92.00000000000000000 ) ) ;

#605 = CARTESIAN_POINT ( 'NONE', ( 0.5932812058778610400, 13.09994847575156200, 92.00000000000000000 ) ) ;

#606 = EDGE_CURVE ( 'NONE', #739, #38, #1594, .T. ) ;

#607 = EDGE_LOOP ( 'NONE', ( #1284, #1907, #1671, #836 ) ) ;

#608 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#609 = DIRECTION ( 'NONE', ( 0.8191520442890191100, -0.5735764363510070800, 0.0000000000000000000 ) ) ;

#610 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#611 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#612 = EDGE_CURVE ( 'NONE', #1057, #2003, #1122, .T. ) ;

#613 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;

#614 = CYLINDRICAL_SURFACE ( 'NONE', #736, 0.3749999999999986100 ) ;

#615 = CARTESIAN_POINT ( 'NONE', ( -0.9947187602146384500, 13.32093239929059100, 92.00000000000000000 ) ) ;

#616 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;

#617 = LINE ( 'NONE', #558, #56 ) ;

#618 = AXIS2_PLACEMENT_3D ( 'NONE', #1337, #1654, #387 ) ;

#619 = ORIENTED_EDGE ( 'NONE', *, *, #1322, .F. ) ;

#620 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.748382715945116500E-014, 0.0000000000000000000 ) ) ;

#621 = EDGE_LOOP ( 'NONE', ( #1265, #139, #33, #812 ) ) ;

#622 = FACE_OUTER_BOUND ( 'NONE', #189, .T. ) ;

#623 = ORIENTED_EDGE ( 'NONE', *, *, #27, .T. ) ;

#624 = ORIENTED_EDGE ( 'NONE', *, *, #1118, .T. ) ;

#625 = ORIENTED_EDGE ( 'NONE', *, *, #204, .T. ) ;

#626 = CARTESIAN_POINT ( 'NONE', ( 0.8732812397853728600, 6.987706636120344300E-016, 92.00000000000000000 ) ) ;

#627 = ORIENTED_EDGE ( 'NONE', *, *, #1482, .T. ) ;

#628 = VERTEX_POINT ( 'NONE', #2056 ) ;

#629 = EDGE_CURVE ( 'NONE', #1647, #1722, #2028, .T. ) ;

#630 = VERTEX_POINT ( 'NONE', #1376 ) ;

#631 = CARTESIAN_POINT ( 'NONE', ( 0.08807929482596171800, 12.77891932626244700, 92.00000000000000000 ) ) ;

#632 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 12.98344526853865800, 0.0000000000000000000 ) ) ;

#633 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#634 = CARTESIAN_POINT ( 'NONE', ( 2.488281239785361100, 13.10844526853865600, 92.00000000000000000 ) ) ;

#635 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#636 = ADVANCED_FACE ( 'NONE', ( #778 ), #2074, .F. ) ;

#637 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#638 = EDGE_CURVE ( 'NONE', #250, #1393, #242, .T. ) ;

#639 = CARTESIAN_POINT ( 'NONE', ( 0.2812812397853641200, 14.02091932626251300, 0.0000000000000000000 ) ) ;

#640 = VECTOR ( 'NONE', #870, 39.37007874015748100 ) ;

#641 = EDGE_CURVE ( 'NONE', #499, #2008, #1744, .T. ) ;

#642 = CIRCLE ( 'NONE', #939, 0.1559999999999922000 ) ;

#643 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#644 = LINE ( 'NONE', #1286, #1330 ) ;

#645 = LINE ( 'NONE', #1967, #213 ) ;

#646 = EDGE_LOOP ( 'NONE', ( #1439, #545, #2007, #343 ) ) ;

#647 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#648 = ADVANCED_FACE ( 'NONE', ( #697 ), #466, .T. ) ;

#649 = LINE ( 'NONE', #766, #1978 ) ;

#650 = ORIENTED_EDGE ( 'NONE', *, *, #846, .F. ) ;

#651 = AXIS2_PLACEMENT_3D ( 'NONE', #501, #1134, #1786 ) ;

#652 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#653 = EDGE_LOOP ( 'NONE', ( #1934, #1445, #952, #1779 ) ) ;

#654 = VECTOR ( 'NONE', #1401, 39.37007874015748100 ) ;

#655 = ORIENTED_EDGE ( 'NONE', *, *, #66, .T. ) ;

#656 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#657 = ORIENTED_EDGE ( 'NONE', *, *, #1782, .T. ) ;

#658 = ORIENTED_EDGE ( 'NONE', *, *, #934, .T. ) ;

#659 = EDGE_CURVE ( 'NONE', #440, #779, #1590, .T. ) ;

#660 = ADVANCED_FACE ( 'NONE', ( #900 ), #514, .F. ) ;

#661 = CARTESIAN_POINT ( 'NONE', ( 2.232023861546514400, 12.98234171055567600, 92.00000000000000000 ) ) ;

#662 = CARTESIAN_POINT ( 'NONE', ( 0.05299928068521205000, 13.46306315820313800, 0.0000000000000000000 ) ) ;

#663 = FACE_OUTER_BOUND ( 'NONE', #1572, .T. ) ;

#664 = EDGE_CURVE ( 'NONE', #1399, #2081, #1387, .T. ) ;

#665 = CARTESIAN_POINT ( 'NONE', ( -1.056718760214637500, 13.65391932626251600, 0.0000000000000000000 ) ) ;

#667 = ADVANCED_FACE ( 'NONE', ( #2002 ), #1642, .F. ) ;

#666 = LINE ( 'NONE', #303, #1998 ) ;

#668 = LINE ( 'NONE', #1038, #1357 ) ;

#669 = LINE ( 'NONE', #1477, #266 ) ;

#670 = ORIENTED_EDGE ( 'NONE', *, *, #1918, .T. ) ;

#671 = AXIS2_PLACEMENT_3D ( 'NONE', #1640, #1630, #1962 ) ;

#672 = VERTEX_POINT ( 'NONE', #2065 ) ;

#673 = LINE ( 'NONE', #1412, #1490 ) ;

#674 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#675 = ORIENTED_EDGE ( 'NONE', *, *, #408, .T. ) ;

#676 = EDGE_LOOP ( 'NONE', ( #399, #490, #377, #737 ) ) ;

#677 = ORIENTED_EDGE ( 'NONE', *, *, #1409, .F. ) ;

#678 = ORIENTED_EDGE ( 'NONE', *, *, #368, .T. ) ;

#679 = PLANE ( 'NONE', #1604 ) ;

#680 = ORIENTED_EDGE ( 'NONE', *, *, #137, .T. ) ;

#681 = ADVANCED_FACE ( 'NONE', ( #1898 ), #448, .F. ) ;

#682 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#683 = CARTESIAN_POINT ( 'NONE', ( 3.762150438307426000, 11.57870846835447600, 92.00000000000000000 ) ) ;

#684 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.748382715945477800E-014, 0.0000000000000000000 ) ) ;

#685 = CARTESIAN_POINT ( 'NONE', ( -1.765575161107041400, 0.2230778877660258300, 92.00000000000000000 ) ) ;

#686 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#687 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#688 = AXIS2_PLACEMENT_3D ( 'NONE', #153, #1427, #620 ) ;

#689 = PERSON_AND_ORGANIZATION ( #1704, #1533 ) ;

#690 = VECTOR ( 'NONE', #1712, 39.37007874015748100 ) ;

#691 = EDGE_CURVE ( 'NONE', #730, #194, #802, .T. ) ;

#692 = FACE_OUTER_BOUND ( 'NONE', #1900, .T. ) ;

#693 = CARTESIAN_POINT ( 'NONE', ( -1.052504938162762900, 13.14308483074342800, 92.00000000000000000 ) ) ;

#694 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#695 = FACE_OUTER_BOUND ( 'NONE', #96, .T. ) ;

#696 = CARTESIAN_POINT ( 'NONE', ( 2.488281239785361100, 13.10844526853865600, 0.0000000000000000000 ) ) ;

#697 = FACE_OUTER_BOUND ( 'NONE', #811, .T. ) ;

#698 = ORIENTED_EDGE ( 'NONE', *, *, #1942, .F. ) ;

#699 = ORIENTED_EDGE ( 'NONE', *, *, #151, .F. ) ;

#700 = CIRCLE ( 'NONE', #1755, 0.1250000000000003100 ) ;

#701 = ORIENTED_EDGE ( 'NONE', *, *, #1112, .F. ) ;

#702 = AXIS2_PLACEMENT_3D ( 'NONE', #1728, #933, #1097 ) ;

#703 = ORIENTED_EDGE ( 'NONE', *, *, #70, .F. ) ;

#704 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #596, .NOT_KNOWN. ) ;

#705 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#706 = ORIENTED_EDGE ( 'NONE', *, *, #919, .T. ) ;

#707 = VERTEX_POINT ( 'NONE', #1256 ) ;

#708 = DIRECTION ( 'NONE', ( 1.000000000000000000, -2.955309776068393200E-014, 0.0000000000000000000 ) ) ;

#709 = EDGE_CURVE ( 'NONE', #865, #61, #1023, .T. ) ;

#710 = CARTESIAN_POINT ( 'NONE', ( -0.9937187602147431500, 13.37270970391462100, 92.00000000000000000 ) ) ;

#711 = EDGE_CURVE ( 'NONE', #1722, #1805, #724, .T. ) ;

#712 = CARTESIAN_POINT ( 'NONE', ( 0.6482812397853616700, 14.78481730511251300, 0.0000000000000000000 ) ) ;

#713 = CARTESIAN_POINT ( 'NONE', ( -1.052504938162762900, 13.14308483074342800, 92.00000000000000000 ) ) ;

#714 = APPROVAL_STATUS ( 'not_yet_approved' ) ;

#715 = CARTESIAN_POINT ( 'NONE', ( 2.488281239785361500, 14.82891932626244400, 92.00000000000000000 ) ) ;

#716 = LINE ( 'NONE', #604, #690 ) ;

#717 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#718 = VECTOR ( 'NONE', #1617, 39.37007874015748900 ) ;

#719 = CARTESIAN_POINT ( 'NONE', ( 2.117626791544234200, 12.91804575904026500, 92.00000000000000000 ) ) ;

#720 = ADVANCED_FACE ( 'NONE', ( #969 ), #1416, .F. ) ;

#721 = DIRECTION ( 'NONE', ( 0.9709959029409647200, -0.2390961239164299500, 0.0000000000000000000 ) ) ;

#722 = LINE ( 'NONE', #1868, #288 ) ;

#723 = EDGE_CURVE ( 'NONE', #603, #739, #1168, .T. ) ;

#724 =…

This is the start of the file's text. The full file is on GovTribe.

Other files for this federal contract opportunity

Other files attached to Next Generation All Aluminum Pallets, newest first.
File Type Posted
RFP_Release_-_Questions_from_Industry_6Nov19.docx DOCX document
RFP_release_-_Questions_from_Industry_15Oct19.docx DOCX document
CDRL_A006_Incoming_Inspection_and_Inventory_Report.pdf PDF
SectionL.doc DOC document
FA853419R0001_______0003.pdf PDF
Amended_MIL-DTL-27443G.pdf PDF
CargoPalletAssembly201993426.STEP STEP file
CenterPanelExtrusion201993428.STEP STEP file
FA853419R0001_______0002.pdf PDF
TieDownRingAssembly201993431.STEP STEP file
IntermediatePanelExtrusion201993427.STEP STEP file
SidePanelExtrusion201993429.STEP STEP file
Amended_Drawings_201993426.pdf PDF
HuckRivetToolNoseAssembly201993432.STEP STEP file
FA853419R0001_______0001.pdf PDF
ppi_tool.accdb MDB file
Transportation_DD_Form_1653.pdf PDF
Eng_Data_List.pdf PDF
Next_Gen_Cargo_Pallet_Replacement_MIL_DTL_27443G.pdf PDF
Packaging_AF_Form_158.pdf PDF
Tie-Down_Ring_Assembly_(X201993431).STEP STEP file
Side_Panel_Extrusion_(X201993429).STEP STEP file
Cargo_Pallet_Assembly_(X201993426).STEP STEP file
Intermediate_Panel_Extrusion_(X201993427).STEP STEP file
Edge_Rail_Extrusion_(X201993430).STEP STEP file
Next_Gen_Past_Performance_Questionnaire_FINAL.docx DOCX document
CDRLS_A001_-_A010.pdf PDF
SOW_Next_Gen.pdf PDF
Section_M_Final.pdf PDF
Center_Panel_Extrusion_(X201993428).STEP STEP file
Side_Panel_Extrusion_(X201993429).STEP STEP file
Q&As_4.pdf PDF
Tie-Down_Ring_Assembly_(X201993431).STEP STEP file
Revised_Drawings.pdf PDF
Information_Sign_in_Sheet.pdf PDF
FA853419R0001.pdf PDF
Revised_Section_M_Aluminum_Pallet.doc DOC document
Revised_Section_L_Aluminum_Pallet.doc DOC document
REVISED_Price_Model.xlsx XLSX spreadsheet
Q&As_Feb_19_final.docx DOCX document
QA_Mar_19_final.docx DOCX document
Draft_-_Next_Gen_Cargo_Pallet_Replacement_MIL_DTL_27443.docx DOCX document
SectionLAluminum.doc DOC document
FA853419R0001.pdf PDF
Drawings.pdf PDF
SectionMAluminum.doc DOC document
SOWNextGenPallet2018.pdf PDF
CargoPalletsCDRLS.pdf PDF
CWBSMatrix.docx DOCX document
PriceModel.xlsx XLSX spreadsheet
Show all 50

Next Generation All Aluminum Pallets has more files on GovTribe.

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

File details come from the government source that posted it. Updated .