CenterPanelExtrusion201993428.STEP

STEP file 317 KB Posted

Attached to
Next Generation All Aluminum Pallets Federal contract opportunity
Solicitation number
FA8534-19-R-0001
Issued by
Department of the Air Force Materiel Command Lifecycle Management Center Robins Air Force Base

About this file

Written by GovTribe AI ·

This pre-solicitation notice seeks proposals for an indefinite delivery, requirements-type contract to manufacture and produce 463L Air Cargo Pallets over 18 months with seven one-year option periods and one six-month option period. The Air Force intends to award a basic contract for first article production of five pallets within 12 months of award, followed by decreased rate production of up to 10,000 pallets in the first option year and full rate production of up to 15,000 pallets in the second and third option years. The remaining four, five, six, seven, eight and nine option periods allow for full rate production of up to 13,000 pallets per year. Proposals will be evaluated using tradeoff source selection procedures, with past performance considered equally as important as cost/price. Award will be made to the responsible offeror providing the best value to the government.

From the source

Center Panel Extrusion STEP file

Text of this file

ISO-10303-21;

HEADER;

FILE_DESCRIPTION (( 'STEP AP203' ),

'1' );

FILE_NAME ('Center Panel Extrusion (X201993428).STEP', '2019-06-13T17:45:31', 'SwSTEP 2.0', 'SolidWorks 2017', FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' ));

ENDSEC;

DATA;

#1 = AXIS2_PLACEMENT_3D ( 'NONE', #1396, #3469, #92 ) ;

#2 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#3 = CARTESIAN_POINT ( 'NONE', ( -6.629605443277540600, -0.1260000000516331200, 0.0000000000000000000 ) ) ;

#4 = AXIS2_PLACEMENT_3D ( 'NONE', #2113, #100, #4190 ) ;

#5 = ORIENTED_EDGE ( 'NONE', *, *, #3427, .F. ) ;

#6 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#7 = VERTEX_POINT ( 'NONE', #3242 ) ;

#8 = VERTEX_POINT ( 'NONE', #1570 ) ;

#9 = ADVANCED_FACE ( 'NONE', ( #3555 ), #3823, .T. ) ;

#10 = CARTESIAN_POINT ( 'NONE', ( -14.44842756469173900, -0.1941758300771300200, 0.0000000000000000000 ) ) ;

#11 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#12 = ORIENTED_EDGE ( 'NONE', *, *, #2903, .T. ) ;

#13 = ORIENTED_EDGE ( 'NONE', *, *, #1727, .T. ) ;

#14 = ORIENTED_EDGE ( 'NONE', *, *, #3165, .F. ) ;

#15 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#16 = EDGE_CURVE ( 'NONE', #3959, #4368, #3107, .T. ) ;

#17 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#18 = CARTESIAN_POINT ( 'NONE', ( -6.629605443277540600, -0.1260000000516331200, 114.0000000000000000 ) ) ;

#19 = ORIENTED_EDGE ( 'NONE', *, *, #2797, .T. ) ;

#20 = ORIENTED_EDGE ( 'NONE', *, *, #2350, .T. ) ;

#21 = ORIENTED_EDGE ( 'NONE', *, *, #244, .F. ) ;

#22 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#23 = VECTOR ( 'NONE', #3201, 39.37007874015748100 ) ;

#24 = EDGE_CURVE ( 'NONE', #168, #585, #3001, .T. ) ;

#25 = CARTESIAN_POINT ( 'NONE', ( -4.429605443278219000, -1.379583236800452900E-014, 0.0000000000000000000 ) ) ;

#26 = ORIENTED_EDGE ( 'NONE', *, *, #805, .F. ) ;

#27 = ORIENTED_EDGE ( 'NONE', *, *, #1279, .T. ) ;

#28 = CARTESIAN_POINT ( 'NONE', ( -14.22141164700470000, -0.07200561881726098800, 0.0000000000000000000 ) ) ;

#29 = CYLINDRICAL_SURFACE ( 'NONE', #3006, 0.01600000000000988100 ) ;

#30 = AXIS2_PLACEMENT_3D ( 'NONE', #319, #3453, #3807 ) ;

#31 = CYLINDRICAL_SURFACE ( 'NONE', #1660, 0.01600000000000988100 ) ;

#32 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#33 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#34 = EDGE_CURVE ( 'NONE', #534, #1979, #3662, .T. ) ;

#35 = VECTOR ( 'NONE', #3827, 39.37007874015748100 ) ;

#36 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#37 = CARTESIAN_POINT ( 'NONE', ( -11.14637316924317300, -2.006502125348847100, 114.0000000000000000 ) ) ;

#38 = VECTOR ( 'NONE', #120, 39.37007874015748100 ) ;

#39 = CARTESIAN_POINT ( 'NONE', ( -8.469605443270323200, -2.049000000049303600, 0.0000000000000000000 ) ) ;

#40 = LINE ( 'NONE', #2567, #926 ) ;

#41 = CALENDAR_DATE ( 2019, 13, 6 ) ;

#42 = CARTESIAN_POINT ( 'NONE', ( -1.074172537623120800, -4.727988082850648000, 114.0000000000000000 ) ) ;

#43 = CARTESIAN_POINT ( 'NONE', ( -14.48399999999036300, -2.133999999999374600, 114.0000000000000000 ) ) ;

#44 = CARTESIAN_POINT ( 'NONE', ( -2.229605443278591000, -5.190511187962099900E-015, 0.0000000000000000000 ) ) ;

#45 = CIRCLE ( 'NONE', #330, 0.03200000000000884100 ) ;

#46 = CARTESIAN_POINT ( 'NONE', ( -10.57960544326564200, -2.049000000049302700, 0.0000000000000000000 ) ) ;

#47 = LINE ( 'NONE', #4207, #2374 ) ;

#48 = CARTESIAN_POINT ( 'NONE', ( -0.2576076273283380300, 6.887931279585421200E-011, 114.0000000000000000 ) ) ;

#49 = CIRCLE ( 'NONE', #2042, 0.1499999999999030700 ) ;

#50 = CIRCLE ( 'NONE', #1143, 0.1343749999997285700 ) ;

#51 = FACE_BOUND ( 'NONE', #3990, .T. ) ;

#52 = ORIENTED_EDGE ( 'NONE', *, *, #2853, .F. ) ;

#53 = EDGE_CURVE ( 'NONE', #2114, #3803, #828, .T. ) ;

#54 = ORIENTED_EDGE ( 'NONE', *, *, #145, .T. ) ;

#55 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.050000000056949800, 114.0000000000000000 ) ) ;

#56 = AXIS2_PLACEMENT_3D ( 'NONE', #3624, #1966, #1207 ) ;

#57 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#58 = CARTESIAN_POINT ( 'NONE', ( 0.1427793368952528800, -2.018023290070424000, 114.0000000000000000 ) ) ;

#59 = EDGE_CURVE ( 'NONE', #1627, #3933, #2423, .T. ) ;

#60 = ORIENTED_EDGE ( 'NONE', *, *, #3667, .T. ) ;

#61 = CARTESIAN_POINT ( 'NONE', ( -0.2576076273283380300, 6.887931279585421200E-011, 114.0000000000000000 ) ) ;

#62 = ORIENTED_EDGE ( 'NONE', *, *, #2117, .F. ) ;

#63 = CARTESIAN_POINT ( 'NONE', ( 0.1850011762960982700, -2.007762476812879900, 114.0000000000000000 ) ) ;

#64 = ORIENTED_EDGE ( 'NONE', *, *, #671, .F. ) ;

#65 = ORIENTED_EDGE ( 'NONE', *, *, #2620, .F. ) ;

#66 = VERTEX_POINT ( 'NONE', #3356 ) ;

#67 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#68 = ORIENTED_EDGE ( 'NONE', *, *, #3806, .F. ) ;

#69 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#70 = DIRECTION ( 'NONE', ( -0.9838850379325014800, 0.1788022151220728700, 0.0000000000000000000 ) ) ;

#71 = VERTEX_POINT ( 'NONE', #993 ) ;

#72 = VERTEX_POINT ( 'NONE', #3339 ) ;

#73 = VERTEX_POINT ( 'NONE', #1305 ) ;

#74 = CARTESIAN_POINT ( 'NONE', ( 2.185478394931410600E-015, 0.02399999994722213500, 114.0000000000000000 ) ) ;

#75 = CARTESIAN_POINT ( 'NONE', ( -4.069605443275970700, -2.060000000055777200, 114.0000000000000000 ) ) ;

#76 = ORIENTED_EDGE ( 'NONE', *, *, #2111, .F. ) ;

#77 = ORIENTED_EDGE ( 'NONE', *, *, #3817, .T. ) ;

#78 = EDGE_CURVE ( 'NONE', #736, #3272, #1843, .T. ) ;

#79 = CARTESIAN_POINT ( 'NONE', ( -13.16960544388961700, -1.860229722202817500, 0.0000000000000000000 ) ) ;

#80 = FACE_OUTER_BOUND ( 'NONE', #1995, .T. ) ;

#81 = ORIENTED_EDGE ( 'NONE', *, *, #546, .F. ) ;

#82 = CARTESIAN_POINT ( 'NONE', ( -14.53039455610181500, -1.811188699379577600, 0.0000000000000000000 ) ) ;

#83 = LINE ( 'NONE', #4189, #1551 ) ;

#84 = EDGE_CURVE ( 'NONE', #3112, #1388, #3918, .T. ) ;

#85 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#86 = FACE_OUTER_BOUND ( 'NONE', #1713, .T. ) ;

#87 = AXIS2_PLACEMENT_3D ( 'NONE', #1848, #1783, #108 ) ;

#88 = LINE ( 'NONE', #2875, #2939 ) ;

#89 = CARTESIAN_POINT ( 'NONE', ( -1.779605443289022500, -2.063000000061460300, 0.0000000000000000000 ) ) ;

#90 = CARTESIAN_POINT ( 'NONE', ( -6.629605443277534400, -1.861098245480930600, 0.0000000000000000000 ) ) ;

#91 = EDGE_CURVE ( 'NONE', #2314, #810, #2842, .T. ) ;

#92 = DIRECTION ( 'NONE', ( 4.408496407860398200E-015, -1.000000000000000000, -0.0000000000000000000 ) ) ;

#93 = APPROVAL_PERSON_ORGANIZATION ( #3374, #1282, #1601 ) ;

#94 = ORIENTED_EDGE ( 'NONE', *, *, #2829, .F. ) ;

#95 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.050000000056949800, 114.0000000000000000 ) ) ;

#96 = CARTESIAN_POINT ( 'NONE', ( -3.979605443275458800, -2.060000000055777200, 114.0000000000000000 ) ) ;

#97 = VECTOR ( 'NONE', #1473, 39.37007874015748100 ) ;

#98 = CARTESIAN_POINT ( 'NONE', ( -12.09960544388725100, -1.982895915069527300, 0.0000000000000000000 ) ) ;

#99 = LINE ( 'NONE', #2263, #1839 ) ;

#100 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.778711206737485100E-015, 0.0000000000000000000 ) ) ;

#101 = LINE ( 'NONE', #1024, #1948 ) ;

#102 = ORIENTED_EDGE ( 'NONE', *, *, #4159, .F. ) ;

#103 = VERTEX_POINT ( 'NONE', #1974 ) ;

#104 = CIRCLE ( 'NONE', #4042, 0.03200000000000972900 ) ;

#105 = EDGE_CURVE ( 'NONE', #2082, #3638, #401, .T. ) ;

#106 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#107 = AXIS2_PLACEMENT_3D ( 'NONE', #1127, #1456, #3854 ) ;

#108 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.097915624818269600E-012, 0.0000000000000000000 ) ) ;

#109 = ORIENTED_EDGE ( 'NONE', *, *, #1625, .T. ) ;

#110 = PLANE ( 'NONE', #2738 ) ;

#111 = EDGE_CURVE ( 'NONE', #4223, #2075, #3979, .T. ) ;

#112 = AXIS2_PLACEMENT_3D ( 'NONE', #2106, #1466, #2833 ) ;

#113 = CARTESIAN_POINT ( 'NONE', ( 1.202013117212275700E-014, -2.049000000049261000, 114.0000000000000000 ) ) ;

#114 = ORIENTED_EDGE ( 'NONE', *, *, #770, .F. ) ;

#115 = EDGE_LOOP ( 'NONE', ( #517, #1763, #1298, #2962 ) ) ;

#116 = EDGE_CURVE ( 'NONE', #2018, #3272, #2158, .T. ) ;

#117 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.050000000056949800, 114.0000000000000000 ) ) ;

#118 = ORIENTED_EDGE ( 'NONE', *, *, #406, .T. ) ;

#119 = ORIENTED_EDGE ( 'NONE', *, *, #2625, .F. ) ;

#120 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.166306654118977600E-016, 0.0000000000000000000 ) ) ;

#121 = DIRECTION ( 'NONE', ( 0.5735764382181004500, 0.8191520429816663300, 0.0000000000000000000 ) ) ;

#122 = ADVANCED_FACE ( 'NONE', ( #2375 ), #1239, .F. ) ;

#123 = VERTEX_POINT ( 'NONE', #3677 ) ;

#124 = VERTEX_POINT ( 'NONE', #1628 ) ;

#125 = PLANE ( 'NONE', #1629 ) ;

#126 = CARTESIAN_POINT ( 'NONE', ( -8.829605443273552000, -1.861098245480937700, 0.0000000000000000000 ) ) ;

#127 = EDGE_CURVE ( 'NONE', #1703, #1255, #2888, .T. ) ;

#128 = ORIENTED_EDGE ( 'NONE', *, *, #3279, .T. ) ;

#129 = ORIENTED_EDGE ( 'NONE', *, *, #3071, .F. ) ;

#130 = CARTESIAN_POINT ( 'NONE', ( -14.64277933687643700, -2.018023290070412000, 0.0000000000000000000 ) ) ;

#131 = ORIENTED_EDGE ( 'NONE', *, *, #4095, .F. ) ;

#132 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ;

#133 = LINE ( 'NONE', #2190, #3080 ) ;

#134 = ORIENTED_EDGE ( 'NONE', *, *, #2085, .T. ) ;

#135 = FACE_OUTER_BOUND ( 'NONE', #782, .T. ) ;

#136 = CARTESIAN_POINT ( 'NONE', ( 0.2093674537689422800, -1.814303487464528500, 114.0000000000000000 ) ) ;

#137 = EDGE_CURVE ( 'NONE', #4096, #3286, #1292, .T. ) ;

#138 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#139 = LINE ( 'NONE', #2921, #3643 ) ;

#140 = CIRCLE ( 'NONE', #2201, 0.01600000000004047800 ) ;

#141 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#142 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#143 = DIRECTION ( 'NONE', ( -0.9751493543055790300, -0.2215484976193980400, 0.0000000000000000000 ) ) ;

#144 = LINE ( 'NONE', #4259, #2461 ) ;

#145 = EDGE_CURVE ( 'NONE', #650, #1071, #1997, .T. ) ;

#146 = CARTESIAN_POINT ( 'NONE', ( -14.68500117628368400, -0.04223752317608316800, 114.0000000000000000 ) ) ;

#147 = LINE ( 'NONE', #2214, #2200 ) ;

#148 = PLANE ( 'NONE', #967 ) ;

#149 = ADVANCED_FACE ( 'NONE', ( #2266 ), #730, .F. ) ;

#150 = EDGE_CURVE ( 'NONE', #2968, #534, #3871, .T. ) ;

#151 = PLANE ( 'NONE', #1455 ) ;

#152 = FACE_OUTER_BOUND ( 'NONE', #1079, .T. ) ;

#153 = PLANE ( 'NONE', #1982 ) ;

#154 = FACE_OUTER_BOUND ( 'NONE', #2017, .T. ) ;

#155 = VECTOR ( 'NONE', #1645, 39.37007874015748100 ) ;

#156 = VECTOR ( 'NONE', #1731, 39.37007874015748100 ) ;

#157 = LINE ( 'NONE', #3437, #938 ) ;

#158 = AXIS2_PLACEMENT_3D ( 'NONE', #831, #2197, #512 ) ;

#159 = ORIENTED_EDGE ( 'NONE', *, *, #2562, .T. ) ;

#160 = ORIENTED_EDGE ( 'NONE', *, *, #3134, .F. ) ;

#161 = EDGE_CURVE ( 'NONE', #1213, #2441, #1356, .T. ) ;

#162 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#163 = VERTEX_POINT ( 'NONE', #4400 ) ;

#164 = ADVANCED_FACE ( 'NONE', ( #2741 ), #662, .T. ) ;

#165 = ORIENTED_EDGE ( 'NONE', *, *, #3950, .T. ) ;

#166 = EDGE_CURVE ( 'NONE', #182, #1118, #3440, .T. ) ;

#167 = CARTESIAN_POINT ( 'NONE', ( 0.1440000000093980000, -2.050000000056949800, 0.0000000000000000000 ) ) ;

#168 = VERTEX_POINT ( 'NONE', #733 ) ;

#169 = ORIENTED_EDGE ( 'NONE', *, *, #1859, .T. ) ;

#170 = EDGE_CURVE ( 'NONE', #1584, #4052, #2207, .T. ) ;

#171 = EDGE_LOOP ( 'NONE', ( #2070, #13, #377, #3078, #3063, #3620, #3794, #2180, #755, #3408, #2906, #848 ) ) ;

#172 = ORIENTED_EDGE ( 'NONE', *, *, #2028, .F. ) ;

#173 = CARTESIAN_POINT ( 'NONE', ( -10.81960544327836100, -0.1260000000516466600, 114.0000000000000000 ) ) ;

#174 = EDGE_LOOP ( 'NONE', ( #3513, #4273, #1000, #859 ) ) ;

#175 = ORIENTED_EDGE ( 'NONE', *, *, #2625, .T. ) ;

#176 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#177 = ORIENTED_EDGE ( 'NONE', *, *, #2204, .F. ) ;

#178 = ORIENTED_EDGE ( 'NONE', *, *, #4124, .T. ) ;

#179 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#180 = VECTOR ( 'NONE', #3627, 39.37007874015748100 ) ;

#181 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#182 = VERTEX_POINT ( 'NONE', #1049 ) ;

#183 = ADVANCED_FACE ( 'NONE', ( #2099 ), #502, .F. ) ;

#184 = CYLINDRICAL_SURFACE ( 'NONE', #1134, 0.1790000000000163100 ) ;

#185 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#186 = FACE_OUTER_BOUND ( 'NONE', #422, .T. ) ;

#187 = CARTESIAN_POINT ( 'NONE', ( 0.03039455611363116700, -1.811188699370953200, 114.0000000000000000 ) ) ;

#188 = FACE_OUTER_BOUND ( 'NONE', #693, .T. ) ;

#189 = EDGE_CURVE ( 'NONE', #8, #1088, #298, .T. ) ;

#190 = AXIS2_PLACEMENT_3D ( 'NONE', #1846, #2184, #199 ) ;

#191 = CARTESIAN_POINT ( 'NONE', ( -8.769605443282191700, 3.290510908368604900E-013, 114.0000000000000000 ) ) ;

#192 = CARTESIAN_POINT ( 'NONE', ( 9.445637622893557100E-012, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#193 = ORIENTED_EDGE ( 'NONE', *, *, #620, .F. ) ;

#194 = PLANE ( 'NONE', #3367 ) ;

#195 = FACE_OUTER_BOUND ( 'NONE', #434, .T. ) ;

#196 = VECTOR ( 'NONE', #1435, 39.37007874015748100 ) ;

#197 = PLANE ( 'NONE', #3626 ) ;

#198 = LINE ( 'NONE', #3466, #624 ) ;

#199 = DIRECTION ( 'NONE', ( 1.000000000000000000, -2.084483946945191000E-015, -0.0000000000000000000 ) ) ;

#200 = ORIENTED_EDGE ( 'NONE', *, *, #265, .T. ) ;

#201 = CARTESIAN_POINT ( 'NONE', ( 0.9019272137529894500, -0.8957631243028346700, 114.0000000000000000 ) ) ;

#202 = ORIENTED_EDGE ( 'NONE', *, *, #2802, .F. ) ;

#203 = FACE_OUTER_BOUND ( 'NONE', #1494, .T. ) ;

#204 = ADVANCED_FACE ( 'NONE', ( #454 ), #2728, .F. ) ;

#205 = CARTESIAN_POINT ( 'NONE', ( -14.53039455610181500, -0.2388113006071168100, 0.0000000000000000000 ) ) ;

#206 = CARTESIAN_POINT ( 'NONE', ( -0.4925031286274558200, -2.710069665679393200, 114.0000000000000000 ) ) ;

#207 = EDGE_LOOP ( 'NONE', ( #2001, #2293, #1566, #756 ) ) ;

#208 = CARTESIAN_POINT ( 'NONE', ( -14.66533511926416000, -0.009277884371113973000, 0.0000000000000000000 ) ) ;

#209 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #3435 ) ;

#210 = EDGE_CURVE ( 'NONE', #3455, #1383, #1515, .T. ) ;

#211 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#212 = ORIENTED_EDGE ( 'NONE', *, *, #1773, .F. ) ;

#213 = CARTESIAN_POINT ( 'NONE', ( -14.44842756469169500, -1.855824169911102400, 0.0000000000000000000 ) ) ;

#214 = CARTESIAN_POINT ( 'NONE', ( -2.379605443278498500, -1.880283543910426800, 0.0000000000000000000 ) ) ;

#215 = ORIENTED_EDGE ( 'NONE', *, *, #4267, .F. ) ;

#216 = VERTEX_POINT ( 'NONE', #1020 ) ;

#217 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.057000000058355900, 0.0000000000000000000 ) ) ;

#218 = EDGE_CURVE ( 'NONE', #2644, #2211, #3157, .T. ) ;

#219 = DIRECTION ( 'NONE', ( -0.1788022151338209400, -0.9838850379303666300, 0.0000000000000000000 ) ) ;

#220 = AXIS2_PLACEMENT_3D ( 'NONE', #1069, #1364, #2777 ) ;

#221 = CARTESIAN_POINT ( 'NONE', ( 0.1863962504935542700, -1.991823412599952300, 0.0000000000000000000 ) ) ;

#222 = ORIENTED_EDGE ( 'NONE', *, *, #612, .F. ) ;

#223 = ORIENTED_EDGE ( 'NONE', *, *, #1690, .F. ) ;

#224 = ADVANCED_FACE ( 'NONE', ( #2948 ), #560, .F. ) ;

#225 = AXIS2_PLACEMENT_3D ( 'NONE', #388, #6, #692 ) ;

#226 = VERTEX_POINT ( 'NONE', #1371 ) ;

#227 = ORIENTED_EDGE ( 'NONE', *, *, #887, .T. ) ;

#228 = EDGE_LOOP ( 'NONE', ( #3468, #2919, #2339, #2824 ) ) ;

#229 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#230 = LINE ( 'NONE', #2060, #1659 ) ;

#231 = DIRECTION ( 'NONE', ( 1.000000000000000000, 9.077913341949116900E-015, 0.0000000000000000000 ) ) ;

#232 = ORIENTED_EDGE ( 'NONE', *, *, #3612, .F. ) ;

#233 = VERTEX_POINT ( 'NONE', #3034 ) ;

#234 = VECTOR ( 'NONE', #3787, 39.37007874015748100 ) ;

#235 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#236 = LINE ( 'NONE', #4015, #3753 ) ;

#237 = CARTESIAN_POINT ( 'NONE', ( -14.24239237266218100, 6.887917620345453400E-011, 114.0000000000000000 ) ) ;

#238 = CYLINDRICAL_SURFACE ( 'NONE', #2623, 0.1499999999999850100 ) ;

#239 = VECTOR ( 'NONE', #445, 39.37007874015748100 ) ;

#240 = CYLINDRICAL_SURFACE ( 'NONE', #3722, 3.394547515700841300 ) ;

#241 = AXIS2_PLACEMENT_3D ( 'NONE', #1937, #929, #3299 ) ;

#242 = CALENDAR_DATE ( 2019, 13, 6 ) ;

#243 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#244 = EDGE_CURVE ( 'NONE', #2454, #216, #1039, .T. ) ;

#245 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );

#246 = ADVANCED_FACE ( 'NONE', ( #195 ), #1083, .T. ) ;

#247 = CARTESIAN_POINT ( 'NONE', ( -5.499605443280480600, -6.810609575948879200, 114.0000000000000000 ) ) ;

#248 = VECTOR ( 'NONE', #3357, 39.37007874015748100 ) ;

#249 = CARTESIAN_POINT ( 'NONE', ( -14.39542629615003300, -0.2472405597312094800, 114.0000000000000000 ) ) ;

#250 = CYLINDRICAL_SURFACE ( 'NONE', #3091, 0.1499999999999303800 ) ;

#251 = EDGE_CURVE ( 'NONE', #3331, #1702, #4198, .T. ) ;

#252 = CARTESIAN_POINT ( 'NONE', ( -11.42682977983950100, -2.050000000056949800, 0.0000000000000000000 ) ) ;

#253 = LINE ( 'NONE', #1359, #2525 ) ;

#254 = FACE_OUTER_BOUND ( 'NONE', #3792, .T. ) ;

#255 = FACE_OUTER_BOUND ( 'NONE', #3419, .T. ) ;

#256 = EDGE_LOOP ( 'NONE', ( #745, #3793, #4090, #3512 ) ) ;

#257 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#258 = EDGE_LOOP ( 'NONE', ( #1419, #631, #1695, #2636 ) ) ;

#259 = CARTESIAN_POINT ( 'NONE', ( 9.565838934614784100E-012, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#260 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Center Panel Extrusion (X201993428)', ( #443, #2746 ), #1606 ) ;

#261 = ORIENTED_EDGE ( 'NONE', *, *, #53, .T. ) ;

#262 = ADVANCED_FACE ( 'NONE', ( #934 ), #3818, .T. ) ;

#263 = ORIENTED_EDGE ( 'NONE', *, *, #1805, .T. ) ;

#264 = ORIENTED_EDGE ( 'NONE', *, *, #105, .T. ) ;

#265 = EDGE_CURVE ( 'NONE', #2551, #3112, #4088, .T. ) ;

#266 = CARTESIAN_POINT ( 'NONE', ( -14.47042629615196700, -0.2472405597312094800, 0.0000000000000000000 ) ) ;

#267 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#268 = DIRECTION ( 'NONE', ( -9.077913341949116900E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ;

#269 = ORIENTED_EDGE ( 'NONE', *, *, #3095, .T. ) ;

#270 = VERTEX_POINT ( 'NONE', #1342 ) ;

#271 = ORIENTED_EDGE ( 'NONE', *, *, #2063, .T. ) ;

#272 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#273 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#274 = CARTESIAN_POINT ( 'NONE', ( -14.66533511926416000, -0.009277884371113973000, 114.0000000000000000 ) ) ;

#275 = EDGE_CURVE ( 'NONE', #2768, #468, #3768, .T. ) ;

#276 = ORIENTED_EDGE ( 'NONE', *, *, #3439, .F. ) ;

#277 = ORIENTED_EDGE ( 'NONE', *, *, #3790, .T. ) ;

#278 = CARTESIAN_POINT ( 'NONE', ( -6.569605443282881700, -2.048885995248197600E-014, 0.0000000000000000000 ) ) ;

#279 = CARTESIAN_POINT ( 'NONE', ( -0.02960544389651810100, 0.0000000000000000000, 114.0000000000000000 ) ) ;

#280 = VERTEX_POINT ( 'NONE', #344 ) ;

#281 = ORIENTED_EDGE ( 'NONE', *, *, #170, .F. ) ;

#282 = LINE ( 'NONE', #1365, #1981 ) ;

#283 = CARTESIAN_POINT ( 'NONE', ( -11.33782977983974200, -2.050000000056949800, 114.0000000000000000 ) ) ;

#284 = LINE ( 'NONE', #1111, #4130 ) ;

#285 = CARTESIAN_POINT ( 'NONE', ( -8.979605443273520400, -1.861098245480757400, 0.0000000000000000000 ) ) ;

#286 = ADVANCED_FACE ( 'NONE', ( #2631 ), #371, .T. ) ;

#287 = VECTOR ( 'NONE', #2662, 39.37007874015748100 ) ;

#288 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#289 = AXIS2_PLACEMENT_3D ( 'NONE', #1830, #2166, #1199 ) ;

#290 = FACE_OUTER_BOUND ( 'NONE', #1319, .T. ) ;

#291 = LOCAL_TIME ( 13, 45, 31.00000000000000000, #2731 ) ;

#292 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#293 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.368413117179139600E-015, 0.0000000000000000000 ) ) ;

#294 = EDGE_CURVE ( 'NONE', #1575, #3959, #3271, .T. ) ;

#295 = AXIS2_PLACEMENT_3D ( 'NONE', #2292, #2627, #1560 ) ;

#296 = CARTESIAN_POINT ( 'NONE', ( 0.1653351192758967200, -0.009277884370909083100, 114.0000000000000000 ) ) ;

#297 = CARTESIAN_POINT ( 'NONE', ( -14.39542629615003300, -0.2472405597312094800, 0.0000000000000000000 ) ) ;

#298 = CIRCLE ( 'NONE', #225, 0.1499999999998317700 ) ;

#299 = EDGE_CURVE ( 'NONE', #280, #1815, #253, .T. ) ;

#300 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );

#301 = VECTOR ( 'NONE', #581, 39.37007874015748100 ) ;

#302 = CARTESIAN_POINT ( 'NONE', ( -5.499605443280480600, -6.810609575948879200, 114.0000000000000000 ) ) ;

#303 = VECTOR ( 'NONE', #3375, 39.37007874015748100 ) ;

#304 = AXIS2_PLACEMENT_3D ( 'NONE', #547, #3576, #2916 ) ;

#305 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.601557413521127000E-015, 0.0000000000000000000 ) ) ;

#306 = ORIENTED_EDGE ( 'NONE', *, *, #2416, .F. ) ;

#307 = ORIENTED_EDGE ( 'NONE', *, *, #788, .F. ) ;

#308 = VECTOR ( 'NONE', #4139, 39.37007874015748100 ) ;

#309 = EDGE_CURVE ( 'NONE', #1590, #474, #49, .T. ) ;

#310 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.902588493266487400E-013, 0.0000000000000000000 ) ) ;

#311 = VERTEX_POINT ( 'NONE', #2420 ) ;

#312 = ADVANCED_FACE ( 'NONE', ( #3323 ), #3462, .T. ) ;

#313 = CARTESIAN_POINT ( 'NONE', ( -0.01599999999043857900, -2.149999999999363100, 114.0000000000000000 ) ) ;

#314 = ORIENTED_EDGE ( 'NONE', *, *, #1042, .F. ) ;

#315 = DIRECTION ( 'NONE', ( 2.491590829295708700E-015, -1.000000000000000000, -0.0000000000000000000 ) ) ;

#316 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#317 = ORIENTED_EDGE ( 'NONE', *, *, #649, .F. ) ;

#318 = EDGE_CURVE ( 'NONE', #1411, #1978, #3708, .T. ) ;

#319 = CARTESIAN_POINT ( 'NONE', ( -12.10076041190622800, -5.377443234285981300, 114.0000000000000000 ) ) ;

#320 = DIRECTION ( 'NONE', ( -0.9838850379242501900, 0.1788022151674770500, 0.0000000000000000000 ) ) ;

#321 = ORIENTED_EDGE ( 'NONE', *, *, #2960, .T. ) ;

#322 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 6.887917620345453400E-011, 114.0000000000000000 ) ) ;

#323 = ORIENTED_EDGE ( 'NONE', *, *, #1479, .F. ) ;

#324 = ORIENTED_EDGE ( 'NONE', *, *, #4365, .T. ) ;

#325 = ORIENTED_EDGE ( 'NONE', *, *, #687, .F. ) ;

#326 = ORIENTED_EDGE ( 'NONE', *, *, #1939, .T. ) ;

#327 = EDGE_CURVE ( 'NONE', #1708, #8, #2683, .T. ) ;

#328 = CARTESIAN_POINT ( 'NONE', ( 3.278217592397115900E-015, -2.149999999999363100, 114.0000000000000000 ) ) ;

#329 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 6.887917620345453400E-011, 114.0000000000000000 ) ) ;

#330 = AXIS2_PLACEMENT_3D ( 'NONE', #3041, #17, #350 ) ;

#331 = VERTEX_POINT ( 'NONE', #2770 ) ;

#332 = VERTEX_POINT ( 'NONE', #2102 ) ;

#333 = CIRCLE ( 'NONE', #1237, 4.182000000000291700 ) ;

#334 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#335 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#336 = EDGE_CURVE ( 'NONE', #3527, #1289, #1351, .T. ) ;

#337 = ORIENTED_EDGE ( 'NONE', *, *, #3027, .F. ) ;

#338 = ORIENTED_EDGE ( 'NONE', *, *, #360, .T. ) ;

#339 = CARTESIAN_POINT ( 'NONE', ( -14.44842756469173900, -0.1941758300771300200, 114.0000000000000000 ) ) ;

#340 = VECTOR ( 'NONE', #3048, 39.37007874015748100 ) ;

#341 = FACE_OUTER_BOUND ( 'NONE', #2336, .T. ) ;

#342 = CIRCLE ( 'NONE', #892, 0.07500000000193594900 ) ;

#343 = CARTESIAN_POINT ( 'NONE', ( -8.979605443273461800, 0.02399999994826365300, 0.0000000000000000000 ) ) ;

#344 = CARTESIAN_POINT ( 'NONE', ( -8.769605443282197000, -0.1260000000516399400, 114.0000000000000000 ) ) ;

#345 = LINE ( 'NONE', #3931, #3258 ) ;

#346 = VECTOR ( 'NONE', #613, 39.37007874015748100 ) ;

#347 = VERTEX_POINT ( 'NONE', #2827 ) ;

#348 = AXIS2_PLACEMENT_3D ( 'NONE', #1819, #2526, #823 ) ;

#349 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#350 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#351 = CARTESIAN_POINT ( 'NONE', ( -2.169605443299052800, -1.883283543917935400, 114.0000000000000000 ) ) ;

#352 = LINE ( 'NONE', #113, #4405 ) ;

#353 = FACE_OUTER_BOUND ( 'NONE', #710, .T. ) ;

#354 = EDGE_CURVE ( 'NONE', #1107, #1014, #3264, .T. ) ;

#355 = CARTESIAN_POINT ( 'NONE', ( -4.552785111002957100, -2.024866299596424800, 114.0000000000000000 ) ) ;

#356 = VECTOR ( 'NONE', #2282, 39.37007874015748100 ) ;

#357 = VECTOR ( 'NONE', #2987, 39.37007874015748100 ) ;

#358 = AXIS2_PLACEMENT_3D ( 'NONE', #1311, #3020, #2413 ) ;

#359 = FACE_OUTER_BOUND ( 'NONE', #1662, .T. ) ;

#360 = EDGE_CURVE ( 'NONE', #2819, #946, #2152, .T. ) ;

#361 = CIRCLE ( 'NONE', #3392, 0.1499999999998549700 ) ;

#362 = VERTEX_POINT ( 'NONE', #2129 ) ;

#363 = CARTESIAN_POINT ( 'NONE', ( 0.1964628969611598200, -0.03107378905957933200, 114.0000000000000000 ) ) ;

#364 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#366 = EDGE_CURVE ( 'NONE', #4381, #3573, #987, .T. ) ;

#367 = CARTESIAN_POINT ( 'NONE', ( 0.2093674537689422800, -1.814303487464528500, 0.0000000000000000000 ) ) ;

#368 = CARTESIAN_POINT ( 'NONE', ( -13.37960544388809400, -2.050000000056950700, 0.0000000000000000000 ) ) ;

#369 = ORIENTED_EDGE ( 'NONE', *, *, #2343, .F. ) ;

#370 = VERTEX_POINT ( 'NONE', #1098 ) ;

#371 = PLANE ( 'NONE', #1756 ) ;

#372 = ORIENTED_EDGE ( 'NONE', *, *, #393, .F. ) ;

#373 = ORIENTED_EDGE ( 'NONE', *, *, #487, .T. ) ;

#374 = AXIS2_PLACEMENT_3D ( 'NONE', #3649, #3989, #211 ) ;

#375 = CARTESIAN_POINT ( 'NONE', ( -4.219605443283411400, -0.1260000000514513200, 114.0000000000000000 ) ) ;

#376 = ORIENTED_EDGE ( 'NONE', *, *, #3287, .F. ) ;

#377 = ORIENTED_EDGE ( 'NONE', *, *, #336, .T. ) ;

#378 = CARTESIAN_POINT ( 'NONE', ( -0.02960544389651810100, -0.2494223022180144000, 114.0000000000000000 ) ) ;

#379 = EDGE_CURVE ( 'NONE', #3353, #3721, #2371, .T. ) ;

#380 = ORIENTED_EDGE ( 'NONE', *, *, #1344, .T. ) ;

#381 = EDGE_LOOP ( 'NONE', ( #3471, #3951, #3465, #851 ) ) ;

#382 = AXIS2_PLACEMENT_3D ( 'NONE', #4231, #450, #3486 ) ;

#383 = CARTESIAN_POINT ( 'NONE', ( 0.1863962504936591500, -0.05817658738803091500, 114.0000000000000000 ) ) ;

#384 = VECTOR ( 'NONE', #2175, 39.37007874015748100 ) ;

#385 = EDGE_CURVE ( 'NONE', #72, #71, #877, .T. ) ;

#386 = CARTESIAN_POINT ( 'NONE', ( -14.68500117628368400, -0.04223752317608316800, 114.0000000000000000 ) ) ;

#387 = ORIENTED_EDGE ( 'NONE', *, *, #2960, .F. ) ;

#388 = CARTESIAN_POINT ( 'NONE', ( -2.379605443278494100, -0.1260000000514771300, 114.0000000000000000 ) ) ;

#389 = FACE_OUTER_BOUND ( 'NONE', #2809, .T. ) ;

#390 = AXIS2_PLACEMENT_3D ( 'NONE', #2552, #1900, #893 ) ;

#391 = CIRCLE ( 'NONE', #1400, 0.1790000000000160400 ) ;

#392 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 6.887917620345453400E-011, 0.0000000000000000000 ) ) ;

#393 = EDGE_CURVE ( 'NONE', #2764, #3236, #555, .T. ) ;

#394 = VECTOR ( 'NONE', #673, 39.37007874015748900 ) ;

#395 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#396 = DIRECTION ( 'NONE', ( 1.000000000000000000, -2.033003158079837100E-015, 0.0000000000000000000 ) ) ;

#397 = LINE ( 'NONE', #3198, #4020 ) ;

#398 = LINE ( 'NONE', #2889, #1028 ) ;

#399 = CARTESIAN_POINT ( 'NONE', ( -13.37960544388809400, -1.900000000057047400, 114.0000000000000000 ) ) ;

#400 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#401 = LINE ( 'NONE', #3693, #2318 ) ;

#402 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#403 = VECTOR ( 'NONE', #3483, 39.37007874015748100 ) ;

#404 = CYLINDRICAL_SURFACE ( 'NONE', #2924, 0.1499999999998145600 ) ;

#405 = EDGE_LOOP ( 'NONE', ( #64, #2532, #326, #1535 ) ) ;

#406 = EDGE_CURVE ( 'NONE', #760, #3721, #4081, .T. ) ;

#407 = EDGE_LOOP ( 'NONE', ( #3629, #2976, #1657, #4068 ) ) ;

#408 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#409 = CARTESIAN_POINT ( 'NONE', ( -9.899605443263872900, -6.175345114069704900, 0.0000000000000000000 ) ) ;

#410 = CARTESIAN_POINT ( 'NONE', ( -0.1136151602068908300, 0.5000789953892990100, 0.0000000000000000000 ) ) ;

#411 = VERTEX_POINT ( 'NONE', #2470 ) ;

#412 = EDGE_CURVE ( 'NONE', #636, #1641, #3152, .T. ) ;

#413 = ORIENTED_EDGE ( 'NONE', *, *, #1087, .F. ) ;

#414 = ORIENTED_EDGE ( 'NONE', *, *, #3077, .F. ) ;

#415 = PLANE ( 'NONE', #3075 ) ;

#416 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#417 = ORIENTED_EDGE ( 'NONE', *, *, #2411, .T. ) ;

#418 = ORIENTED_EDGE ( 'NONE', *, *, #2315, .F. ) ;

#419 = PLANE ( 'NONE', #2566 ) ;

#420 = ORIENTED_EDGE ( 'NONE', *, *, #1059, .T. ) ;

#421 = AXIS2_PLACEMENT_3D ( 'NONE', #3669, #2992, #2288 ) ;

#422 = EDGE_LOOP ( 'NONE', ( #3113, #3135, #1174, #3060 ) ) ;

#423 = EDGE_LOOP ( 'NONE', ( #2714, #4200, #1953, #1169 ) ) ;

#424 = DIRECTION ( 'NONE', ( -1.000000000000000000, 2.084483946945191000E-015, 0.0000000000000000000 ) ) ;

#425 = ORIENTED_EDGE ( 'NONE', *, *, #2742, .T. ) ;

#426 = ORIENTED_EDGE ( 'NONE', *, *, #2296, .T. ) ;

#427 = VERTEX_POINT ( 'NONE', #2810 ) ;

#428 = EDGE_CURVE ( 'NONE', #1911, #3222, #352, .T. ) ;

#429 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#430 = CIRCLE ( 'NONE', #1446, 0.1499999999999030700 ) ;

#431 = CARTESIAN_POINT ( 'NONE', ( 1.013219347551358500, -1.447027184563203700, 0.0000000000000000000 ) ) ;

#432 = CARTESIAN_POINT ( 'NONE', ( -4.369605443283312200, -0.1260000000516258700, 114.0000000000000000 ) ) ;

#433 = VERTEX_POINT ( 'NONE', #3147 ) ;

#434 = EDGE_LOOP ( 'NONE', ( #1631, #4227, #2652, #3021 ) ) ;

#435 = DIRECTION ( 'NONE', ( 0.1788022151343214000, -0.9838850379302756000, -0.0000000000000000000 ) ) ;

#436 = LINE ( 'NONE', #3002, #340 ) ;

#437 = EDGE_CURVE ( 'NONE', #1799, #3455, #676, .T. ) ;

#438 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#439 = VECTOR ( 'NONE', #395, 39.37007874015748100 ) ;

#440 = ADVANCED_FACE ( 'NONE', ( #1454 ), #772, .F. ) ;

#441 = AXIS2_PLACEMENT_3D ( 'NONE', #668, #996, #2327 ) ;

#442 = FACE_OUTER_BOUND ( 'NONE', #2605, .T. ) ;

#443 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #1482 ) ;

#444 = VECTOR ( 'NONE', #529, 39.37007874015748100 ) ;

#445 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#446 = CARTESIAN_POINT ( 'NONE', ( 0.05003440964915207400, 0.07145654206231441500, 114.0000000000000000 ) ) ;

#447 = CARTESIAN_POINT ( 'NONE', ( -10.96960544327830800, 0.0000000000000000000, 114.0000000000000000 ) ) ;

#448 = CARTESIAN_POINT ( 'NONE', ( -0.02960544389651810100, -1.800577697901532400, 114.0000000000000000 ) ) ;

#449 = VECTOR ( 'NONE', #70, 39.37007874015748100 ) ;

#450 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#451 = VECTOR ( 'NONE', #2109, 39.37007874015748100 ) ;

#452 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.219801894846721900E-014, 0.0000000000000000000 ) ) ;

#453 = LINE ( 'NONE', #571, #3163 ) ;

#454 = FACE_OUTER_BOUND ( 'NONE', #702, .T. ) ;

#455 = LINE ( 'NONE', #3917, #3982 ) ;

#456 = CARTESIAN_POINT ( 'NONE', ( -14.64277933687643700, -2.018023290070412000, 114.0000000000000000 ) ) ;

#457 = FACE_OUTER_BOUND ( 'NONE', #115, .T. ) ;

#458 = AXIS2_PLACEMENT_3D ( 'NONE', #871, #1868, #2866 ) ;

#459 = ORIENTED_EDGE ( 'NONE', *, *, #34, .F. ) ;

#460 = ADVANCED_FACE ( 'NONE', ( #4296 ), #3974, .F. ) ;

#461 = CARTESIAN_POINT ( 'NONE', ( -14.24239237266218100, -2.050000000056949800, 0.0000000000000000000 ) ) ;

#462 = EDGE_CURVE ( 'NONE', #638, #4329, #2466, .T. ) ;

#463 = CARTESIAN_POINT ( 'NONE', ( -11.02960544388489000, -1.860229722202817500, 0.0000000000000000000 ) ) ;

#464 = CARTESIAN_POINT ( 'NONE', ( -6.779605443277498400, -0.1260000000514659400, 114.0000000000000000 ) ) ;

#465 = CARTESIAN_POINT ( 'NONE', ( -2.229605443278590100, -0.1260000000516196000, 114.0000000000000000 ) ) ;

#466 = CARTESIAN_POINT ( 'NONE', ( -0.1136151602068908300, 0.5000789953892990100, 114.0000000000000000 ) ) ;

#467 = ORIENTED_EDGE ( 'NONE', *, *, #3642, .T. ) ;

#468 = VERTEX_POINT ( 'NONE', #1490 ) ;

#469 = EDGE_CURVE ( 'NONE', #4040, #1263, #1232, .T. ) ;

#470 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.166306654118977600E-016, 0.0000000000000000000 ) ) ;

#471 = CARTESIAN_POINT ( 'NONE', ( 0.1850011762963343100, -0.04223752317509000400, 114.0000000000000000 ) ) ;

#472 = ORIENTED_EDGE ( 'NONE', *, *, #3102, .T. ) ;

#473 = ORIENTED_EDGE ( 'NONE', *, *, #2869, .T. ) ;

#474 = VERTEX_POINT ( 'NONE', #2497 ) ;

#475 = CARTESIAN_POINT ( 'NONE', ( -8.829605443273560900, -3.892883390971575300E-014, 114.0000000000000000 ) ) ;

#476 = CARTESIAN_POINT ( 'NONE', ( 0.1653351192758967200, -0.009277884370909083100, 114.0000000000000000 ) ) ;

#477 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#478 = VERTEX_POINT ( 'NONE', #4244 ) ;

#479 = ORIENTED_EDGE ( 'NONE', *, *, #53, .F. ) ;

#480 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#481 = ORIENTED_EDGE ( 'NONE', *, *, #2797, .F. ) ;

#482 = FACE_BOUND ( 'NONE', #1638, .T. ) ;

#483 = ADVANCED_FACE ( 'NONE', ( #4193 ), #148, .T. ) ;

#484 = ORIENTED_EDGE ( 'NONE', *, *, #4302, .F. ) ;

#485 = EDGE_LOOP ( 'NONE', ( #2757, #807, #536, #3675 ) ) ;

#486 = VECTOR ( 'NONE', #654, 39.37007874015748100 ) ;

#487 = EDGE_CURVE ( 'NONE', #2968, #2900, #1780, .T. ) ;

#488 = LINE ( 'NONE', #4121, #3192 ) ;

#489 = CIRCLE ( 'NONE', #3575, 0.1499999999998863900 ) ;

#490 = AXIS2_PLACEMENT_3D ( 'NONE', #619, #2245, #1581 ) ;

#491 = PLANE ( 'NONE', #3431 ) ;

#492 = CYLINDRICAL_SURFACE ( 'NONE', #4008, 0.01600000000000923300 ) ;

#493 = EDGE_CURVE ( 'NONE', #1432, #4043, #3867, .T. ) ;

#494 = CARTESIAN_POINT ( 'NONE', ( -2.169605443299052800, -0.1499999999310233400, 114.0000000000000000 ) ) ;

#495 = LINE ( 'NONE', #3622, #3199 ) ;

#496 = CARTESIAN_POINT ( 'NONE', ( -1.092739197465705300E-015, -2.050000000056954700, 0.0000000000000000000 ) ) ;

#497 = VECTOR ( 'NONE', #3246, 39.37007874015748100 ) ;

#498 = VERTEX_POINT ( 'NONE', #2335 ) ;

#499 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#500 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#501 = ADVANCED_FACE ( 'NONE', ( #2257, #255, #51, #2791, #3208, #3381, #777, #4301 ), #3727, .F. ) ;

#502 = CYLINDRICAL_SURFACE ( 'NONE', #3257, 0.1499999999999041500 ) ;

#503 = CARTESIAN_POINT ( 'NONE', ( -2.352785111008358400, -2.027866299599808500, 0.0000000000000000000 ) ) ;

#504 = LINE ( 'NONE', #1935, #4031 ) ;

#505 = CARTESIAN_POINT ( 'NONE', ( -14.22141164700470000, -0.07200561881726098800, 114.0000000000000000 ) ) ;

#506 = FACE_OUTER_BOUND ( 'NONE', #2474, .T. ) ;

#507 = AXIS2_PLACEMENT_3D ( 'NONE', #2354, #1680, #1947 ) ;

#508 = DIRECTION ( 'NONE', ( -3.152222846794524900E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ;

#509 = ORIENTED_EDGE ( 'NONE', *, *, #2251, .F. ) ;

#510 = ORIENTED_EDGE ( 'NONE', *, *, #1172, .T. ) ;

#511 = EDGE_CURVE ( 'NONE', #3414, #791, #1681, .T. ) ;

#512 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#513 = ORIENTED_EDGE ( 'NONE', *, *, #4414, .T. ) ;

#514 = AXIS2_PLACEMENT_3D ( 'NONE', #1438, #4153, #1802 ) ;

#515 = DIRECTION ( 'NONE', ( -0.9838850379241830300, -0.1788022151678463100, 0.0000000000000000000 ) ) ;

#516 = VERTEX_POINT ( 'NONE', #3698 ) ;

#517 = ORIENTED_EDGE ( 'NONE', *, *, #2243, .T. ) ;

#518 = EDGE_CURVE ( 'NONE', #684, #2954, #3000, .T. ) ;

#519 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#520 = VERTEX_POINT ( 'NONE', #4013 ) ;

#521 = AXIS2_PLACEMENT_3D ( 'NONE', #2202, #1914, #2591 ) ;

#522 = PLANE ( 'NONE', #4127 ) ;

#523 = VERTEX_POINT ( 'NONE', #2641 ) ;

#524 = ADVANCED_FACE ( 'NONE', ( #4249 ), #3384, .F. ) ;

#525 = EDGE_CURVE ( 'NONE', #750, #1785, #3772, .T. ) ;

#526 = EDGE_LOOP ( 'NONE', ( #264, #160, #1849, #716 ) ) ;

#527 = CARTESIAN_POINT ( 'NONE', ( -11.14637316924317300, -2.006502125348847100, 0.0000000000000000000 ) ) ;

#528 = CARTESIAN_POINT ( 'NONE', ( -6.419605443282923900, 0.02399999994827403300, 114.0000000000000000 ) ) ;

#529 = DIRECTION ( 'NONE', ( -1.000000000000000000, 9.240401603545243000E-014, 0.0000000000000000000 ) ) ;

#530 = ORIENTED_EDGE ( 'NONE', *, *, #2386, .T. ) ;

#531 = ORIENTED_EDGE ( 'NONE', *, *, #944, .F. ) ;

#532 = EDGE_LOOP ( 'NONE', ( #1262, #1385, #4377, #4063 ) ) ;

#533 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#534 = VERTEX_POINT ( 'NONE', #1328 ) ;

#535 = ORIENTED_EDGE ( 'NONE', *, *, #3343, .F. ) ;

#536 = ORIENTED_EDGE ( 'NONE', *, *, #3194, .F. ) ;

#537 = CIRCLE ( 'NONE', #2898, 0.01600000000000988100 ) ;

#538 = CARTESIAN_POINT ( 'NONE', ( -13.05283771853133600, -2.006502125348847500, 114.0000000000000000 ) ) ;

#539 = VERTEX_POINT ( 'NONE', #615 ) ;

#540 = ORIENTED_EDGE ( 'NONE', *, *, #2376, .T. ) ;

#541 = LINE ( 'NONE', #3205, #1272 ) ;

#542 = AXIS2_PLACEMENT_3D ( 'NONE', #1790, #813, #1471 ) ;

#543 = FACE_OUTER_BOUND ( 'NONE', #3003, .T. ) ;

#544 = CARTESIAN_POINT ( 'NONE', ( 0.1850011762960982700, -2.007762476812879900, 114.0000000000000000 ) ) ;

#545 = LINE ( 'NONE', #3377, #721 ) ;

#546 = EDGE_CURVE ( 'NONE', #3692, #906, #3661, .T. ) ;

#547 = CARTESIAN_POINT ( 'NONE', ( -2.513300154171122100E-014, -2.049000000049406600, 114.0000000000000000 ) ) ;

#548 = LINE ( 'NONE', #833, #444 ) ;

#549 = AXIS2_PLACEMENT_3D ( 'NONE', #3964, #1909, #2607 ) ;

#550 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#551 = SHAPE_DEFINITION_REPRESENTATION ( #209, #260 ) ;

#552 = CARTESIAN_POINT ( 'NONE', ( -6.419605443282923900, -0.1260000000516336700, 0.0000000000000000000 ) ) ;

#553 = ORIENTED_EDGE ( 'NONE', *, *, #309, .F. ) ;

#554 = EDGE_CURVE ( 'NONE', #1957, #3665, #3822, .T. ) ;

#555 = LINE ( 'NONE', #1129, #1677 ) ;

#556 = LINE ( 'NONE', #2160, #196 ) ;

#557 = CARTESIAN_POINT ( 'NONE', ( -10.66960544326617100, -2.049000000049303200, 114.0000000000000000 ) ) ;

#558 = VECTOR ( 'NONE', #1956, 39.37007874015748100 ) ;

#559 = CARTESIAN_POINT ( 'NONE', ( -14.70936745375731100, -0.2356965125243393500, 114.0000000000000000 ) ) ;

#560 = CYLINDRICAL_SURFACE ( 'NONE', #4192, 0.1789999999999982700 ) ;

#561 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#562 = ORIENTED_EDGE ( 'NONE', *, *, #4350, .T. ) ;

#563 = CIRCLE ( 'NONE', #4135, 0.1499999999998768400 ) ;

#564 = CARTESIAN_POINT ( 'NONE', ( -10.86500102264599700, -2.004607213588576600, 114.0000000000000000 ) ) ;

#565 = EDGE_CURVE ( 'NONE', #4148, #2858, #3552, .T. ) ;

#566 = CIRCLE ( 'NONE', #289, 3.394547515700840500 ) ;

#567 = EDGE_LOOP ( 'NONE', ( #994, #2232, #3634, #656 ) ) ;

#568 = AXIS2_PLACEMENT_3D ( 'NONE', #3190, #3503, #3473 ) ;

#569 = ADVANCED_FACE ( 'NONE', ( #2745 ), #2471, .T. ) ;

#570 = EDGE_CURVE ( 'NONE', #3837, #960, #2426, .T. ) ;

#571 = CARTESIAN_POINT ( 'NONE', ( -11.33782977983974200, -2.050000000056949800, 114.0000000000000000 ) ) ;

#572 = ORIENTED_EDGE ( 'NONE', *, *, #4391, .F. ) ;

#573 = ORIENTED_EDGE ( 'NONE', *, *, #1022, .F. ) ;

#574 = CARTESIAN_POINT ( 'NONE', ( -0.5623098769976413400, -3.094191389837080800, 114.0000000000000000 ) ) ;

#575 = AXIS2_PLACEMENT_3D ( 'NONE', #3713, #2385, #1711 ) ;

#576 = APPROVAL_ROLE ( '' ) ;

#577 = EDGE_LOOP ( 'NONE', ( #2811, #4104, #2434, #1858 ) ) ;

#578 = CARTESIAN_POINT ( 'NONE', ( 1.202013117212275700E-014, -2.049000000049238800, 114.0000000000000000 ) ) ;

#579 = EDGE_CURVE ( 'NONE', #182, #906, #2000, .T. ) ;

#580 = PLANE ( 'NONE', #295 ) ;

#581 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#582 = EDGE_LOOP ( 'NONE', ( #4056, #4151, #1218, #4297 ) ) ;

#583 = CARTESIAN_POINT ( 'NONE', ( -2.229605443278586600, -1.880283543910362900, 114.0000000000000000 ) ) ;

#584 = ORIENTED_EDGE ( 'NONE', *, *, #210, .T. ) ;

#585 = VERTEX_POINT ( 'NONE', #1994 ) ;

#586 = AXIS2_PLACEMENT_3D ( 'NONE', #297, #4050, #977 ) ;

#587 = EDGE_LOOP ( 'NONE', ( #3354, #3185, #369, #2501 ) ) ;

#588 = EDGE_LOOP ( 'NONE', ( #4330, #897, #2234, #562 ) ) ;

#589 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.057000000058355900, 114.0000000000000000 ) ) ;

#590 = ORIENTED_EDGE ( 'NONE', *, *, #3410, .F. ) ;

#591 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#592 = LINE ( 'NONE', #431, #3416 ) ;

#593 = CARTESIAN_POINT ( 'NONE', ( -14.49999999999043600, 0.08400000001130354700, 114.0000000000000000 ) ) ;

#594 = ORIENTED_EDGE ( 'NONE', *, *, #2222, .F. ) ;

#595 = VERTEX_POINT ( 'NONE', #4084 ) ;

#596 = ADVANCED_FACE ( 'NONE', ( #4033 ), #3345, .F. ) ;

#597 = VECTOR ( 'NONE', #2966, 39.37007874015748100 ) ;

#598 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#599 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.608511739367509100E-015, 0.0000000000000000000 ) ) ;

#600 = AXIS2_PLACEMENT_3D ( 'NONE', #691, #1626, #2316 ) ;

#601 = CARTESIAN_POINT ( 'NONE', ( -9.219605443262105700, -2.049000000049303200, 114.0000000000000000 ) ) ;

#602 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.526172063499451600E-015, 0.0000000000000000000 ) ) ;

#603 = CIRCLE ( 'NONE', #2226, 0.1499999999999041500 ) ;

#604 = CARTESIAN_POINT ( 'NONE', ( -9.899605443263872900, -6.175345114069704900, 114.0000000000000000 ) ) ;

#605 = CYLINDRICAL_SURFACE ( 'NONE', #2850, 0.01600000000000988100 ) ;

#606 = EDGE_CURVE ( 'NONE', #791, #1117, #2686, .T. ) ;

#607 = LINE ( 'NONE', #259, #1932 ) ;

#608 = LINE ( 'NONE', #713, #1772 ) ;

#609 = CARTESIAN_POINT ( 'NONE', ( -14.66533511925712200, -2.040722115617029000, 0.0000000000000000000 ) ) ;

#610 = DIRECTION ( 'NONE', ( 1.008160968303785100E-014, -1.000000000000000000, -0.0000000000000000000 ) ) ;

#611 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#612 = EDGE_CURVE ( 'NONE', #347, #498, #1044, .T. ) ;

#613 = DIRECTION ( 'NONE', ( -0.9751493543054167200, -0.2215484976201121900, 0.0000000000000000000 ) ) ;

#614 = CIRCLE ( 'NONE', #3896, 0.01600000000000982200 ) ;

#615 = CARTESIAN_POINT ( 'NONE', ( -8.829605443273552000, -1.861098245480937700, 114.0000000000000000 ) ) ;

#616 = ORIENTED_EDGE ( 'NONE', *, *, #1842, .F. ) ;

#617 = AXIS2_PLACEMENT_3D ( 'NONE', #3847, #2155, #3479 ) ;

#618 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#619 = CARTESIAN_POINT ( 'NONE', ( -2.379605443278494100, -0.1260000000514771300, 114.0000000000000000 ) ) ;

#620 = EDGE_CURVE ( 'NONE', #3837, #1383, #2633, .T. ) ;

#621 = VECTOR ( 'NONE', #2653, 39.37007874015748100 ) ;

#622 = VECTOR ( 'NONE', #880, 39.37007874015748100 ) ;

#623 = ADVANCED_FACE ( 'NONE', ( #881 ), #404, .F. ) ;

#624 = VECTOR ( 'NONE', #2831, 39.37007874015748100 ) ;

#625 = ORIENTED_EDGE ( 'NONE', *, *, #1671, .F. ) ;

#626 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.119823746700471700E-015, 0.0000000000000000000 ) ) ;

#627 = ORIENTED_EDGE ( 'NONE', *, *, #1665, .T. ) ;

#628 = CARTESIAN_POINT ( 'NONE', ( -13.37960544388809400, -1.900000000057047400, 114.0000000000000000 ) ) ;

#629 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#630 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#631 = ORIENTED_EDGE ( 'NONE', *, *, #753, .F. ) ;

#632 = CARTESIAN_POINT ( 'NONE', ( -0.01599999999046917600, -2.133999999999398200, 114.0000000000000000 ) ) ;

#633 = CARTESIAN_POINT ( 'NONE', ( 0.2106625515008219700, -1.159201144560896100, 114.0000000000000000 ) ) ;

#634 = EDGE_LOOP ( 'NONE', ( #1870, #2691, #2284, #1316 ) ) ;

#635 = DIRECTION ( 'NONE', ( 0.9751493543055790300, 0.2215484976193980400, 0.0000000000000000000 ) ) ;

#636 = VERTEX_POINT ( 'NONE', #3093 ) ;

#637 = PLANE ( 'NONE', #1273 ) ;

#638 = VERTEX_POINT ( 'NONE', #46 ) ;

#639 = EDGE_LOOP ( 'NONE', ( #281, #1104, #3065, #1530 ) ) ;

#640 = EDGE_CURVE ( 'NONE', #4402, #1131, #1740, .T. ) ;

#641 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#642 = ORIENTED_EDGE ( 'NONE', *, *, #150, .T. ) ;

#643 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#644 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.060000000055777200, 0.0000000000000000000 ) ) ;

#645 = ORIENTED_EDGE ( 'NONE', *, *, #91, .F. ) ;

#646 = ORIENTED_EDGE ( 'NONE', *, *, #1594, .T. ) ;

#647 = AXIS2_PLACEMENT_3D ( 'NONE', #4106, #2762, #1697 ) ;

#648 = ADVANCED_FACE ( 'NONE', ( #2103 ), #2701, .T. ) ;

#649 = EDGE_CURVE ( 'NONE', #1164, #3898, #3105, .T. ) ;

#650 = VERTEX_POINT ( 'NONE', #10 ) ;

#651 = EDGE_LOOP ( 'NONE', ( #2773, #3116, #2581, #642 ) ) ;

#652 = DIRECTION ( 'NONE', ( 3.751740694624232300E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ;

#653 = CARTESIAN_POINT ( 'NONE', ( -2.229605443278586600, -1.880283543910362900, 114.0000000000000000 ) ) ;

#654 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#655 = ORIENTED_EDGE ( 'NONE', *, *, #887, .F. ) ;

#656 = ORIENTED_EDGE ( 'NONE', *, *, #837, .T. ) ;

#657 = ORIENTED_EDGE ( 'NONE', *, *, #4039, .T. ) ;

#658 = LINE ( 'NONE', #2694, #3243 ) ;

#659 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#660 = VERTEX_POINT ( 'NONE', #4119 ) ;

#661 = EDGE_LOOP ( 'NONE', ( #2716, #990, #2601, #1379 ) ) ;

#662 = PLANE ( 'NONE', #1431 ) ;

#663 = CIRCLE ( 'NONE', #1414, 0.1499999999999030700 ) ;

#664 = CYLINDRICAL_SURFACE ( 'NONE', #4035, 4.182000000000290800 ) ;

#665 = AXIS2_PLACEMENT_3D ( 'NONE', #4371, #4041, #4390 ) ;

#666 = CIRCLE ( 'NONE', #1944, 0.07500000000193683700 ) ;

#667 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;

#668 = CARTESIAN_POINT ( 'NONE', ( -14.39542629615003300, -1.802759440256980900, 114.0000000000000000 ) ) ;

#669 = VECTOR ( 'NONE', #2274, 39.37007874015748100 ) ;

#670 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;

#671 = EDGE_CURVE ( 'NONE', #1424, #3573, #4146, .T. ) ;

#672 = CIRCLE ( 'NONE', #707, 0.1499999999999795400 ) ;

#673 = DIRECTION ( 'NONE', ( -0.8191520431545779000, 0.5735764379711567600, 0.0000000000000000000 ) ) ;

#674 = ORIENTED_EDGE ( 'NONE', *, *, #3184, .F. ) ;

#675 = AXIS2_PLACEMENT_3D ( 'NONE', #984, #1329, #3745 ) ;

#676 = LINE ( 'NONE', #3191, #2575 ) ;

#677 = EDGE_CURVE ( 'NONE', #739, #72, #101, .T. ) ;

#678 = LINE ( 'NONE', #3824, #4247 ) ;

#679 = VECTOR ( 'NONE', #470, 39.37007874015748100 ) ;

#680 = AXIS2_PLACEMENT_3D ( 'NONE', #2538, #1217, #3966 ) ;

#681 = CARTESIAN_POINT ( 'NONE', ( -6.269605443281901300, -2.057000000058355900, 0.0000000000000000000 ) ) ;

#682 = VERTEX_POINT ( 'NONE', #2759 ) ;

#683 = CARTESIAN_POINT ( 'NONE', ( 9.570209891404647300E-012, -2.133999999999353700, 114.0000000000000000 ) ) ;

#684 = VERTEX_POINT ( 'NONE', #2367 ) ;

#685 = LINE ( 'NONE', #201, #2950 ) ;

#686 = CARTESIAN_POINT ( 'NONE', ( -8.619605443282241100, 0.02399999994826529000, 0.0000000000000000000 ) ) ;

#687 = EDGE_CURVE ( 'NONE', #2395, #1854, #3601, .T. ) ;

#688 = CIRCLE ( 'NONE', #4027, 0.07500000000193375600 ) ;

#689 = VERTEX_POINT ( 'NONE', #2052 ) ;

#690 = PLANE ( 'NONE', #3399 ) ;

#691 = CARTESIAN_POINT ( 'NONE', ( -4.820388402034224900, 6.884228054219925700, 114.0000000000000000 ) ) ;

#692 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#693 = EDGE_LOOP ( 'NONE', ( #3017, #715, #852, #2756 ) ) ;

#694 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;

#695 = ORIENTED_EDGE ( 'NONE', *, *, #3901, .F. ) ;

#696 = CARTESIAN_POINT ( 'NONE', ( -9.219605443262105700, -2.049000000049303200, 0.0000000000000000000 ) ) ;

#697 = CARTESIAN_POINT ( 'NONE', ( -7.699605443268046300, -6.175345114069679100, 0.0000000000000000000 ) ) ;

#698 = PLANE ( 'NONE', #3215 ) ;

#699 = ORIENTED_EDGE ( 'NONE', *, *, #4188, .F. ) ;

#700 = AXIS2_PLACEMENT_3D ( 'NONE', #3028, #4046, #1317 ) ;

#701 = CARTESIAN_POINT ( 'NONE', ( -5.783573335121058500, -8.259798695630854200, 0.0000000000000000000 ) ) ;

#702 = EDGE_LOOP ( 'NONE', ( #1874, #1787, #1367, #261 ) ) ;

#703 = ORIENTED_EDGE ( 'NONE', *, *, #3886, .F. ) ;

#704 = EDGE_CURVE ( 'NONE', #810, #4148, #2845, .T. ) ;

#705 = CARTESIAN_POINT ( 'NONE', ( -4.219605443283411400, 0.02399999994827690200, 114.0000000000000000 ) ) ;

#706 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.030134347584308700E-013, 0.0000000000000000000 ) ) ;

#707 = AXIS2_PLACEMENT_3D ( 'NONE', #935, #561, #2333 ) ;

#708 = ORIENTED_EDGE ( 'NONE', *, *, #1253, .T. ) ;

#709 = ORIENTED_EDGE ( 'NONE', *, *, #3690, .F. ) ;

#710 = EDGE_LOOP ( 'NONE', ( #3505, #3376, #695, #1004 ) ) ;

#711 = VECTOR ( 'NONE', #2141, 39.37007874015748100 ) ;

#712 = CARTESIAN_POINT ( 'NONE', ( 0.1850011762963343100, -0.04223752317509000400, 0.0000000000000000000 ) ) ;

#713 = CARTESIAN_POINT ( 'NONE', ( -0.9663759549654580300, -4.253519652032999900, 114.0000000000000000 ) ) ;

#714 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;

#715 = ORIENTED_EDGE ( 'NONE', *, *, #844, .F. ) ;

#716 = ORIENTED_EDGE ( 'NONE', *, *, #1405, .T. ) ;

#717 = ORIENTED_EDGE ( 'NONE', *, *, #4383, .F. ) ;

#718 = VECTOR ( 'NONE',…

This is the start of the file's text. The full file is on GovTribe.

Other files for this federal contract opportunity

Other files attached to Next Generation All Aluminum Pallets, newest first.
File Type Posted
RFP_Release_-_Questions_from_Industry_6Nov19.docx DOCX document
FA853419R0001_______0004.pdf PDF
MIL-DTL-27443G.pdf PDF
Additional_Questions_from_Industry_2Oct19.docx DOCX document
CargoPalletAssembly201993426.STEP STEP file
FA853419R0001_______0002.pdf PDF
Price_Model_Revised.xlsx XLSX spreadsheet
TieDownRingAssembly201993431.STEP STEP file
IntermediatePanelExtrusion201993427.STEP STEP file
RFP_release_-_Questions_from_Industry.docx DOCX document
FA853419R0001_______0001.pdf PDF
ppi_tool.accdb MDB file
Eng_Data_List.pdf PDF
Next_Gen_Cargo_Pallet_Replacement_MIL_DTL_27443G.pdf PDF
Side_Panel_Extrusion_(X201993429).STEP STEP file
Cargo_Pallet_Assembly_(X201993426).STEP STEP file
Center_Panel_Extrusion_(X201993428).STEP STEP file
Intermediate_Panel_Extrusion_(X201993427).STEP STEP file
Edge_Rail_Extrusion_(X201993430).STEP STEP file
CDRLS_A001_-_A010.pdf PDF
SOW_Next_Gen.pdf PDF
Drawing_Package.pdf PDF
Section_L_Final.pdf PDF
Price_Model,_final.xlsx XLSX spreadsheet
FA853419R0001.pdf PDF
ppi_tool.accdb MDB file
Section_M_Final.pdf PDF
Q&As_4.pdf PDF
Tie-Down_Ring_Assembly_(X201993431).STEP STEP file
Edge_Rail_Extrusion_(X201993430).STEP STEP file
Cargo_Pallet_Assembly_(X201993426).STEP STEP file
Intermediate_Panel_Extrusion_(X201993427).STEP STEP file
Pre-Solicitation_Conference_Questions_Final.pdf PDF
Revised_Drawings.pdf PDF
Agenda.docx DOCX document
Information_Sign_in_Sheet.pdf PDF
REVISED_Price_Model.xlsx XLSX spreadsheet
REVISED_SOW_NextGenPallet.pdf PDF
Revised_Section_L_Aluminum_Pallet.doc DOC document
QA_Mar_19_final.docx DOCX document
Draft_-_Next_Gen_Cargo_Pallet_Replacement_MIL_DTL_27443.docx DOCX document
SectionLAluminum.doc DOC document
FA853419R0001.pdf PDF
SOWNextGenPallet2018.pdf PDF
CargoPalletsCDRLS.pdf PDF
CWBSMatrix.docx DOCX document
PriceModel.xlsx XLSX spreadsheet
DraftForm1653.doc DOC document
PackagingFORM158.pdf PDF
Drawings.pdf PDF
Show all 50

Next Generation All Aluminum Pallets has more files on GovTribe.

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

File details come from the government source that posted it. Updated .