4.9_Minimum_Team_Complement_Rev_D_8-20.pdf

PWS Appendix 4.9- Minimum Team Complement (MTC)

IAW Clause H-2, Minimum Team Complement, the contractor shall employ at least a minimum number of qualified employees to perform the services described in the PWS. This section represents the specific categories of maintenance workers, and minimum requirements for each CLIN, that are applied to this contract. Full-time equivalent (FTE) personnel shall be in accordance with the Department of Labor (DOL) guidelines, with minimums specified in Table 1 below. In addition, the contractor shall have a minimum supervisor to employee ratio of 1 to 15.

The total MTC will be established at the beginning of a performance period, consisting of the total of all FTEs listed on the CLIN funded for that period. Once the MTC is established, the contractor may utilize the MTC however it prefers. For example, individuals may be allocated identically to the CLIN in the table, cross-utilized amongst CLIN and/or organized in a structure other than what the CLINs suggest. Further, IAW PWS Appendix 4.3, Deliverable Z01, the contractor is required to submit the minimum team complement report monthly. If the contractor fails to meet the MTC for a given month, the PCO will seek consideration IAW Clause H-2, Minimum Team Complement, paragraph (b).

The skill classifications contained in this PWS are consistent with the Department of Labor’s Register of Wage Determinations issued under the Service Contact Act. Job descriptions for each classification are taken from the latest version of the Service Contract Act Directory of Occupations.

Categories:

23400 Heating, Refrigeration And Air-Conditioning Mechanic

Installs, services and repairs environmental-control systems in residences, department stores, office buildings and other commercial establishments, utilizing knowledge of refrigeration theory, pipefitting and structural layout. Mounts compressor and condenser units on platform or floor, using hand tools, following blueprints or engineering specifications. Fabricates, assembles and installs ductwork and chassis parts, using portable metalworking tools and welding equipment. Installs evaporator unit in chassis or in air-duct system, using hand tools. Cuts and bends tubing to correct length and shape, using cutting and bending equipment and tools. Cuts and threads pipe, using machine-threading or hand-threading equipment. Joins tubing or pipes to various refrigerating units by means of sleeves, couplings or unions, and solders joints, using torch, forming complete circuit for refrigerant. Installs expansion and discharge valves in circuit.

Connects motors, compressors, temperature controls, humidity controls and circulating ventilation fans to control panels and connects control panels to power source. Installs air and water filters in completed installation. Injects small amount of refrigerant into compressor to test systems and adds freon gas to build up prescribed operating pressure. Observes pressure and vacuum gauges and adjusts controls to insure proper operation. Tests joints and connections for gas leaks, using gauges or soap-and-water solution. Wraps pipes in insulation batting and secures them in place with cement or wire bands. Replaces defective breaker controls, thermostats, switches, fuses and electrical wiring to repair installed units, using electrician's hand tools and

Revision D 20 Aug 15

1288848080C Highlight test equipment. May install, repair and service air conditioners, ranging from fifteen to twenty tons cooling capacity, in warehouses and small factory buildings.

23430 Heavy Equipment Mechanic

Analyzes malfunctions and repairs, rebuilds and maintains power equipment, such as cranes, power shovels, scrapers, paving machines, motor graders, trench-digging machines, conveyors, bulldozers, dredges, pumps, compressors and pneumatic tools. Operates and inspects machines or equipment to diagnose defects. Dismantles and reassembles equipment, using hoists and hand tools. Examines parts for damage or excessive wear, using micrometers and gauges. Replaces defective engines and subassemblies, such as transmissions. Tests overhauled equipment to insure operating efficiency. Welds broken parts and structural members. May direct workers engaged in cleaning parts and assisting with assembly and disassembly of equipment. May repair, adjust and maintain mining machinery, such as stripping and loading shovels, drilling and cutting machines, and continuous mining machines

23440 Heavy Equipment Operators

Operates heavy equipment such as cranes, clamshells, power shovels, motor graders, heavy loaders, carryalls, bulldozers, rollers, scrapers, and large industrial tractors with pan or scrapper attachments. Equipment is used to excavate, load or move dirt, gravel or other materials.

Operator may read and interpret grade and slope stakes and simple plans. May grease, adjust and make emergency repairs to equipment.

23470 Laborer

Performs tasks which require mainly physical abilities and effort involving little or no specialized skill or prior work experience. The following tasks are typical of this occupation:

Loads and unloads trucks, and other conveyances; moves supplies and materials to proper location by wheelbarrows or handtrucks; stacks materials for storage or binning; collects refuse and salvageable materials. Digs, fills, and tamps earth excavations; levels ground using pick, shovel, tamper and rake; shovels concrete and snow; cleans culverts and ditches; cuts tree and brush; operates power lawnmowers. Moves and arranges heavy pieces of office and household furniture, equipment, and appliances; moves heavy pieces of automotive, medical engineering, and other types of machinery and equipment. Spreads sand and salt on icy roads and walk-ways;

picks up leaves and trash.

23500 Locksmith

Installs, repairs, modifies, and opens a variety of locking mechanisms found on doors, desks, compartments, mobile equipment, safes, and vaults. Examines locking mechanism and installs new unit or disassembles unit and replaces worn tumblers, springs, and other parts or repairs them by filing, drilling, chiseling and grinding. Opens door locks by moving lockpick in cylinder or opens safe locks by listening to lock sounds or by drilling. Makes new or duplicate keys, using key cutting machine. Changes combination by inserting new or repaired tumblers into lock.

Establishes keying systems for buildings. .

23370 General Maintenance Worker

Performs general maintenance and repair of equipment and buildings requiring practical skill and knowledge (but not proficiency) in such trades as painting, carpentry, plumbing, masonry, and electrical work. Work involves a variety of the following duties: Replacing electrical receptacles, wires, switches, fixtures, and motors; using plaster or compound to patch minor holes and cracks in walls and ceilings; repairing or replacing sinks, water coolers, and toilets; painting structures and equipment; repairing or replacing concrete floors, steps, and sidewalks; replacing damaged panelling and floor tiles; hanging doors and installing door locks; replacing broken window panes; and performing general maintenance on equipment and machinery.

Excluded are:

1. Craft workers included in a formal apprenticeship or progression program based on training and experience;

2. Skilled craft workers required to demonstrate proficiency in one or more trades;

3. Workers performing simple maintenance duties not requiring practical skill and knowledge of a trade(e.g., changing light bulbs and replacing faucet washers).

23290 Fire Alarm System Mechanic

Inspects, tests, maintains, and repairs installed fire alarm detection and suppression systems in accordance with manufacturer's specifications and National Fire Protection Association standards. Inspects fire alarm equipment visually and replaces defective components. Tests initiating and signal circuits, detectors, and system transmitter and makes needed repairs.

Checks pressure gauges on suppression system storage containers and recharges or replaces containers.

23340 Fuel Distribution System Mechanic

Maintains and repairs fuel storage and distribution systems, using hand and power tools and testing instruments. Inspects fuel receiving, storage, and distribution facilities to detect and correct leakage, corrosion, faulty fittings, and malfunction of mechanical units, meters, and gauges such as distribution lines, float gauges, piping valves, pumps, and roof sumps. Inspects electrical wiring, switches, and controls for safe-operating condition, grounding, and adjustment.

Lubricates and repacks valves. Lubricates pumps, replaces gaskets, and seals and corrects pumping equipment misalignment. Cleans strainers and filters, services water separators, and checks meters for correct delivery and calibration. Overhauls system components such as pressure regulating valves and excess valves. Disassembles, adjusts, aligns, and calibrates gauges and meters or replaces them. Removes and installs equipment such as filters and piping to modify system or repair and replace system component. Cleans fuel tanks and distribution lines.

Removes corrosion and repaints surfaces. Overhauls vacuum and pressure vents, floating roof seals, hangers, and roof sumps. Maintains record of inspections and repairs.

23183 Electronics Technician, Maintenance III

Applies advanced technical knowledge to solve unusually complex problems that typically cannot be solved solely by referencing manufacturers' manuals or similar documents. Examples of such problems include determining the location and density of circuitry, evaluating electromagnetic radiation, isolating malfunctions, and incorporating engineering changes.

Work typically requires a detailed understanding of the interrelationships of circuits. Exercises independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow. Uses complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices. May provide technical guidance to lower level technicians.

23182 Electronics Technician, Maintenance II

Applies comprehensive technical knowledge to solve complex problems by interpreting manufacturers' manuals or similar documents. Work requires familiarity with the interrelationships of circuits and judgment in planning work sequence and in selecting tools and testing instruments.

Receives technical guidance, as required, from supervisor or higher level technician, and work is reviewed for compliance with accepted practices. May provide technical guidance to lower level technicians.

23181 Electronics Technician, Maintenance I

Applies technical knowledge to perform simple or routine tasks following detailed instructions.

Performs such tasks as replacing components and wiring circuits; repairing simple electronic equipment; and taking test readings using common instruments such as digital multimeters, signal generators, semiconductor testers, curve tracers, and oscilloscopes.

Receives technical guidance, as required, from supervisor or higher level technician. Work is spot-checked for accuracy.

23160 Electrician, Maintenance

Performs a variety of electrical trade functions such as the installation, maintenance, or repair of equipment for the generation, distribution, or utilization of electric energy. Work involves most of the following: Installing or repairing any of a variety of electrical equipment such as generators, transformers, switchboards, controllers, circuit breakers, motors, heating units, conduit systems, or other transmission equipment; working from blueprints, drawings, layouts, or other specifications; locating and diagnosing trouble in the electrical system or equipment;

working standard computations relating to load requirements of wiring or electrical equipment;

and using a variety of electrician's hand tools and measuring and testing instruments. In general, the work of the maintenance electrician requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience.

23130 Carpenter, Maintenance

Performs the carpentry duties necessary to maintain in good repair building woodwork and equipment such as bins, cribs, counters, benches, partitions, doors, floors, stairs, casings, and trim made of wood. Work involves most of the following: Planning and laying out of work from blueprints, drawings, models, or verbal instructions, using a variety of carpenter's hand tools, portable power tools and standard measuring instruments; making standard shop computations relating to dimensions of work; and selecting materials necessary for the work. In general, the work of the maintenance carpenter requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience.

23530 Machinery Maintenance Mechanic

Repairs machinery or mechanical equipment. Work involves most of the following: Examining machines and mechanical equipment to diagnose source of trouble; dismantling or partly dismantling machines and performing repairs that mainly involve the use of hand tools in scraping and fitting parts; replacing broken or defective parts with items obtained from stock;

ordering the production of a replacement part by a machine shop or sending the machine to a machine shop for major repairs; preparing written specifications for major repairs or for the production of parts ordered from machine shops; reassembling machines and making all necessary adjustments for operation. In general, the work of a Machinery Maintenance Mechanic requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience. Excluded from this classification are workers whose primary duties involve setting up or adjusting machines.

23580 Maintenance Trades Helper

Assists one or more workers in the skilled maintenance trades by performing specific or general duties of lesser skill, such as keeping a worker supplied with materials and tools; cleaning working area, machine, and equipment; assisting journeyman by holding materials or tools; and performing other unskilled tasks as directed by journeyman. The kind of work the helper is permitted to perform varies from trade to trade. In some trades the helper is confined to supplying, lifting, and holding materials and tools, and cleaning working areas; and in others the worker is permitted to perform specialized machine operations, or parts of a trade that are also performed by workers on a full-time basis.

23760 Painter, Maintenance

Paints and redecorates walls, woodwork and fixtures. Work involves the following: Knowledge of surface peculiarities and types of paint required for different applications; preparing surface for painting by removing old finish or by placing putty or filler in nail holes and interstices; and applying paint with spray gun or brush. May mix colors, oils, white lead and other paint ingredients to obtain proper color or consistency. In general, the work of the maintenance painter requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience.

23790 Pipefitter, Maintenance

Installs or repairs water, steam, gas or other types of pipe and pipefittings. Work involves most of the following: Laying out work and measuring to locate position of pipe from drawings or other written specifications; cutting various sizes of pipe to correct lengths with chisel and hammer, oxyacetylene torch or pipe-cutting machines; threading pipe with stocks and dies, bending pipe by hand-driven or power-driven machines; assembling pipe with couplings and fastening pipe to hangers; making standard shop computations relating to pressures, flow and size of pipe required; and making standard tests to determine whether finished pipes meet specifications. In general, the work of the maintenance pipefitter requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience.

23800 Plumber, Maintenance

Assembles, installs and repairs pipes, fittings and fixtures of heating, water, and drainage systems, according to specifications and plumbing codes. Studies building plans and working drawings to determine work aids required and sequence of installations. Inspects structure to ascertain obstructions to be avoided to prevent weakening of structure resulting from installation of pipe. Locates and marks position of pipe and pipe connections and passage holes for pipes in walls and floors, using ruler, spirit level and plumb bob. Cuts openings in walls and floors to accommodate pipe and pipe fittings, using hand tools and power tools. Cuts and threads pipe, using pipe cutters, cutting torch, and pipe-threading machine. Bends pipe to required angle by use of pipe-bending machine or by placing pipe over block and bending it by hand. Assembles and installs valves, pipe fittings, and pipes composed of metals, such as iron, steel, brass and lead, and nonmetals, such as glass, vitrified clay, and plastic, using hand tools and power tools.

Joins pipe by use of screws, bolts, fittings, solder, plastic solvent, and calks joints. Fills pipe system with water or air and reads pressure gauges to determine whether system is leaking.

Installs and repairs plumbing fixtures, such as sinks, commodes, bathtubs, water heaters, hot water tanks, garbage disposal units, dishwashers, and water softeners. Repairs and maintains plumbing by replacing washers in leaky faucets, mending burst pipes, and opening clogged drains. May weld holding fixtures to steel structural members.

23890 Sheet-Metal Worker, Maintenance

Fabricates, installs and maintains in good repair the sheet-metal equipment and fixtures (such as machine guards, grease pans, shelves, lockers, tanks, ventilators, chutes, ducts, metal roofing) of an establishment. Work involves most of the following: Planning and laying out all types of sheet-metal maintenance work from blueprints, models, or other specifications; setting up and operating all available types of sheet-metal working machines; using a variety of hand tools in cutting, bending, forming, shaping, fitting and assembling; and installing sheet-metal articles as required. In general, the work of the maintenance sheet-metal worker requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience.

23960 Welder, Combination, Maintenance

Welds metal components together to fabricate or repair products, such as machine parts, plant equipment, mobile homes, motors and generators, according to layouts, blueprints or work orders, using brazing and a variety of arc and gas welding equipment. Welds metal parts together, using both gas welding or brazing and any combination of arc welding processes.

Performs related tasks such as thermal cutting and grinding. Repairs broken or cracked parts, fills holes and increases size of metal parts. Positions and clamps together components of fabricated metal products preparatory to welding. May locate and repair cracks in industrial engine cylinder heads, using inspection equipment and gas torch. May perform repairs only. May be required to pass employer performance tests or standard tests to meet certification standards of governmental agencies or professional and technical associations

25210 Water Treatment Plant Operator

Controls treatment plant machines and equipment to purify and clarify water for human consumption and for industrial use. Operates and controls electric motors, pumps, and valves to regulate flow of raw water into treating plant. Dumps specified amounts of chemicals, such as chlorine, ammonia, and lime into water or adjusts automatic devices that admit specified amounts of chemicals into tanks to disinfect, deodorize, and clarify water. Starts agitators to mix chemicals and allows impurities to settle to bottom of tank. Turns valves to regulate water through filter beds to remove impurities. Pumps purified water into water mains. Monitors panel board and adjusts controls to regulator flow rates, loss of head pressure and water elevation and distribution of water. Cleans tanks and filter beds, using backwashing (reverse flow of water).

Repairs and lubricates machines and equipment, using hand- and power tools. Tests water samples to determine acidity, color, and impurities, using colorimeter, turbidimeter, and conductivity meter. Dumps chemicals such as alum into tanks to coagulate impurities and reduce acidity. Records data, such as residual content of chemicals, water turbidity, and water pressure.

May operate portable water-purification plant to supply drinking water. May purify waste water from plant preparatory to pumping water into rivers and steams or city mains.

25040 Sewage Plant Operator (Wastewater Treatment Plant Operator)

Operates sewage treatment, sludge processing, and disposal equipment in wastewater (sewage) treatment plant to control flow and processing of sewage: Monitors control panels and adjusts valves and gates manually or by remote control to regulate flow of sewage. Observes variations in operating conditions and interprets meter and gauge readings, and tests results to determine load requirements. Starts and stops pumps, engines and generators to control flow of raw sewage through filtering, settling, aeration, and sludge digestion processes. Maintains log of operations and records meter and gas readings. Gives directions to wastewater treatment-plant attendants and sewage-disposal workers in performing routine operations and maintenance. May collect sewage sample, using dipper or bottle and conduct laboratory tests, using testing equipment, such as colorimeter. May operate and maintain power generating equipment to provide steam and electricity for plant.

25070 Stationary Engineer

Operates and maintains one or more systems which provide an establishment with such services as heat, air-conditioning (cool, humidify, dehumidify, filter, and circulate air), refrigeration, steam or high-temperature water or electricity. Duties involve: Observing and interpreting readings on gauges, meters and charts which register various aspects of the system's operation, adjusting controls to insure safe and efficient operation of the system and to meet demands for the service provided; recording in logs various aspects of the system's operation; keeping the engines, machinery and equipment of the system in good working order. May direct and coordinate activities of other workers (not stationary engineers) in performing tasks directly related to operating and maintaining the system or systems. The classification excludes head or chief engineers in establishments employing more than one engineer; workers required to be skilled in the repair of electronic control equipment; workers in establishments producing electricity, steam, or heated or cooled air primarily for sale; and Boiler Tenders

25010 Boiler Tender

Tends one or more boilers to produce steam or high-temperature water for use in an establishment. Fires boiler. Observes and interprets readings on gauges, meters, and charts which register various aspects of boiler operation. Adjusts controls to insure safe and efficient boiler operation and to meet demands for steam or high-temperature water. May also do one or more of the following: Maintain a log in which various aspects of boiler operation are recorded; clean, oil, make minor repairs or assist in repair to boiler room equipment; and following prescribed methods, treat boiler water with chemicals and analyze boiler water for such things as acidity, causticity, and alkalinity.

11270 Pest Controller (Exterminator)

Sprays chemical solutions or toxic gases and sets mechanical traps to kill pests that infest buildings and surrounding areas. Fumigates rooms and buildings, using toxic gases. Sprays chemical solutions or dusts powders in rooms and work areas. Places poisonous paste or bait and mechanical traps where pests are present. May clean areas that harbor pests, using rakes, brooms, shovels, and mops preparatory to fumigating. May be required to hold State license.

25190 Ventilation Equipment Tender

Tends ventilating and heating equipment, such as fans, vacuum pumps, air compressors, vents and ducts, and lubrication-oil coolers used in buildings or industrial processes: Adjusts valves to regulate temperature of lubrication oil and flow of water through system. Moves controls to regulate speed of fans and to adjust vents and ducts. Records gauge readings, repairs completed, and time lost because of inoperative equipment. Writes repair work order tickets and out-of-order tags preparatory to equipment repair. Inspects equipment to detect excessive noise and heat.

Replaces gauges and tightens and chalks leaky fittings, using wrenches, hammers, and chalking tool. Cleans carbon deposits, pitch, and grease from fans, vents and ducts, using scrapers, hammer, and compressed air or steam.

Lagger (Thermal Insulation Engineer) A thermal insulation engineer covers pipes, boilers and ductwork with insulating material and metal cladding. The purpose of this is to keep heat in – in the case of heating systems – or to keep heat out – in the case of refrigeration or air conditioning systems. The lagger must have minimum of two (2) years of experience in industrial facilities. Must be able to install, remove or repair any type of insulation on HVAC systems but not limited to; insulates surfaces of pipes, ducts, valves, fittings, flanges, boilers, tanks, turbines, evaporators, refrigerating units, and similar structures. Lagger must also perform fabrication, interpret blueprints and sketches & perform surface measurements and mathematical calculations for various insulating projects.

Asbestos Abatement Technician Asbestos abatement technician is required to abide by industry and AF guidelines pertaining to hazardous waste handling norms. The technician must be well conversant with the rules and regulations of the U.S. Environmental Protection Agency (EPA) or Occupational Safety and Health Administration (OSHA). In order to perform professionally as asbestos abatement work technician, must hold a license from an institute that teaches essential asbestos removal techniques through academic instructions and hands-on training programs.

Employee removes and disposes of hazardous materials and prepares worksite to insure safety of the public during removal. Material removal may include asbestos found in pipe lagging, ceilings, floors or other hazardous materials.

Job duties includes but not limited to; Prepares job sites for hazardous materials removal and disposal, including constructing containment and negative air pressure systems as appropriate.

Removes, disposal or encapsulates hazardous materials in accordance with applicable Air Force, state and federal regulations. Uses high efficiency particulate matter vacuum system to clean areas where asbestos dust and fibers are present.

Assists in planning work assignments, determining material needs, and estimating time and cost of hazardous material removal or encapsulation. Posts appropriate signs to warn facility users of potential hazards; informs facility users about removal or encapsulation projects. Keeps required records of work performed, such as asbestos removal and air quality.

Training must have been provided by any accredited training provider approved by the U. S Environmental Protection Agency or Oklahoma Department of Labor.

CLIN # Total Full-Time Equivalent (FTE)

Work Request & Management of Service Calls

(DSW) X001

Work Control Clerk - Electrician (1) Work Control Clerk - HVAC Tech (1) Work Control Clerk - HVAC Tech (1) Work Control Clerk - Plumber (1) Work Control Clerk - General Maintenance Worker (1) Planner - Electrician (1) Planner - HVAC (1)

Planner - Plumber (1) Planner - Sheet Metal (1) Planner - General Maintenance Worker (1) Data Entry (1) Data Entry (1) Data Entry (1)

Work Request Review Board Management X002 Work Control Lead (1)

Work Order Allocation Program Management X003 Work Control Manager (1) Work Control Lead (1) 2

Preventive Maintenance Program Management X004 RWP Manager (1) 1

Operations Overhead Management X005

Program Manager (1) Deputy program manager (1) Operations manager (1) QC manager (1) Safety manager (1) Operations Engineer (1)

Emergency Corrective

Scheduled Sustainment Work

Base Wide (less work covered in CLINS 13-25)

COLS 1 - Priority 1 & 3A thru 3C (100%)

X006

HVAC/R Technician (22) Electronics Technician, Maintenance II (4) Electronics Technician, Maintenance III (4) Plumber (10) Electrician, Maintenance (10) Sheet Metal Technician (6) General Maintenance Worker (4) Painter (3) Asbestos Abatement Technician (3) Fire Suppression Mechanic (2)

Machinery Maintenance Mechanic (3) Machinist, Maintenance (3) Welder (3) High Voltage Electrician (2) Fire Alarm System Mechanic (2) Fuels Mechanic (6) Carpenter (6) Roofer (4) Locksmith (2) Pipe Fitter (4) Lagger (2)

Scheduled Sustainment Work

Base Wide

COLS 2 - Priority 1, 3A and 3B (100%); 3C (50%)

X006

HVAC/R Technician (20) Electronics Technician, Maintenance II (4) Electronics Technician, Maintenance III (3) General Maintenance Worker (4) Plumber (8) Electrician, Maintenance (10) Sheet Metal Technician (6) Painter(3) Fire Suppression Mechanic (2) Asbestos Abatement Technician (2)

Machinery Maintenance Mechanic (3) Machinist, Maintenance (3) Welder (3) High Voltage Electrician (2) Fire Alarm System Mechanic (2) Fuels Mechanic (6) Carpenter (6) Roofer (4) Locksmith (2) Pipe Fitter (4) Lagger(2)

Scheduled Sustainment Work

Base Wide

COLS 3 - Priority 1, 3A and 3B (100%); 3C (25%)

X006

HVAC/R Technician (16) Electronics Technician, Maintenance II (4) Electronics Technician, Maintenance III (3) General Maintenance Worker (4) Plumber (8) Electrician, Maintenance (8) Sheet Metal Technician (6) Painter(3) Fire Suppression Mechanic (1) Asbestos Abatement Technician (1)

Machinery Maintenance Mechanic (3) Machinist, Maintenance (3) Welder (3) High Voltage Electrician (2) Fire Alarm System Mechanic (1) Fuels Mechanic (6) Carpenter (6) Roofer (4) Locksmith (2) Pipe Fitter (4) Lagger(1)

Scheduled Sustainment Work

Base Wide

COLS 4 - Priority 1, 3A and 3B (100%); 3C (10%)

X006

HVAC/R Technician (14) Electronics Technician, Maintenance II (4) Electronics Technician, Maintenance III (3)\ General Maintenance Worker (4) Plumber (7) Electrician, Maintenance (9) Sheet Metal Technician (6) Painter (3) Fire Suppression Mechanic (.5) Asbestos Abatement Technician (1)

Machinery Maintenance Mechanic (3) Machinist, Maintenance (3) Welder (3) High Voltage Electrician (2) Fire Alarm System Mechanic (.5) Fuels Mechanic (6) Carpenter (6) Roofer (4) Locksmith (2) Pipe Fitter (4) Lagger (1)

Table 1- Tinker AFB Civil Engineer (CE)- Operations Management Minimum Team Complement Position Titles (FTE)

Position Titles (FTE)

Scheduled Sustainment Work

Base Wide

COLS 5 - Priority 1, 3A (100%); 3B (50%); 3C (10%)

X006

HVAC/R Technician (14) Electronics Technician, Maintenance II (3) Electronics Technician, Maintenance III (3) General Maintenance Worker - HVAC/R (2) Plumber (7) Electrician, Maintenance (6) Sheet Metal Technician (8) Painter (3) Fire Suppression Mechanic (.5) Asbestos Abatement Technician (1)

General Maintenance Worker (3) Machinery Maintenance Mechanic (3) Machinist, Maintenance (3) Welder (2) High Voltage Electrician (2) Fire Alarm System Mechanic (.5) Fuels Mechanic (5) Carpenter (3) Roofer (4) Locksmith (2) Pipe Fitter (4) Lagger (1)

Scheduled Sustainment Work

Base Wide

COLS 6 - Priority 1, 3A (100%); 3B (25%); 3C (10%)

X006

HVAC/R Technician (14) Electronics Technician, Maintenance II (3) Electronics Technician, Maintenance III (3) General Maintenance Worker - HVAC/R (2) Plumber (5) Electrician, Maintenance (4) Sheet Metal Technician (6) General Maintenance Worker (3) Painter(2) Fire Suppression Mechanic (.5) Asbestos Abatement Technician (1)

Machinery Maintenance Mechanic (2) Machinist, Maintenance (3) Welder (2) High Voltage Electrician (2) Fire Alarm System Mechanic (.5) Fuels Mechanic (5) Carpenter (3) Roofer (4) Locksmith (2) Pipe Fitter (4) Lagger (1)

PM for Facilities/Infrastructure (SRM)

Base Wide (less DMAG, Navy, DLA, & work covered in CLINS 13-25)

COLS 1 - 100% of PM Workload

X007

HVAC/R Technician (11) Electronics Technician, Maintenance II (1) Electronics Technician, Maintenance III (1) Laborer (1) General Maintenance Worker (3) Data Entry (3) Plumbers (5) Backflow Prevention Technician (2) Fire Suppression Mechanic (1.5)

Electrician, Maintenance (5) High Voltage Electrician (1) Fire Alarm System Mechanic (1.5) Fuels Mechanic (2) Carpenter (1) Roofer (1)

PM for Facilities/Infrastructure

Base Wide (SRM)

COLS 2 - TMDI (50-99) & ORM (>4)

X007

HVAC/R Technician (10) Electronics Technician, Maintenance II (1) Electronics Technician, Maintenance III (1) General Maintenance Worker (2) Data Entry (3) Plumbers (5) Backflow Prevention Technician (2) Fire Suppression Mechanic (1)

Electrician, Maintenance (4) High Voltage Electrician (1) Fire Alarm System Mechanic (1) Fuels Mechanic (2) Carpenter (1) Roofer (1)

PM for Facilities/Infrastructure

Base Wide (SRM)

COLS 3 - TMDI (60-99) & ORM (>4.15)

X007

HVAC/R Technician (7) Electronics Technician, Maintenance II (1) Electronics Technician, Maintenance III (1) General Maintenance Worker (2) Data Entry (2) Plumbers (4) Backflow Prevention Technician (2) Fire Suppression Mechanic (.5)

Electrician, Maintenance (3) High Voltage Electrician (1) Fire Alarm System Mechanic(.5) Fuels Mechanic (2) Carpenter (1) Roofer (1)

PM for Facilities/Infrastructure

Base Wide (SRM)

COLS 4 - TMDI (80-99) & ORM (>0)

X007

HVAC/R Technician (5) Electronics Technician, Maintenance II (1) Electronics Technician, Maintenance III (1) General Maintenance Worker (2) Data Entry (2) Plumbers (3) Backflow Prevention Technician (2) Fire Suppression Mechanic (.25)

Electrician, Maintenance (2) High Voltage Electrician (1) Fire Alarm System Mechanic (.25) Fuels Mechanic (2) Carpenter (1) Roofer (1)

23.5

PM for Facilities/Infrastructure

DMAG (less Base Wide, Navy, DLA, & work covered in CLINS 13-25)

COLS 1 - 100% of PM Workload

X008

HVAC/R Technician (7) Electronics Technician, Maintenance II (1) Electronics Technician, Maintenance III (1) General Maintenance Worker (1) Data Entry (2) Plumbers (2) Fire Suppression Mechanic (2)

Backflow Prevention Technician (1) Electrician, Maintenance (2) High Voltage Electrician (1) Fire Alarm System Mechanic (1) Fuels Mechanic (1) Carpenter (1) Roofer (1)

Position Titles (FTE)

PM for Facilities/Infrastructure

DMAG

COLS 2 - ORM (>4.0)

X008

HVAC/R Technician (5) Electronics Technician, Maintenance II (1) Electronics Technician, Maintenance III (1) General Maintenance Worker (1) Data Entry (2) Plumbers (2) Backflow Prevention Technician (1) Fire Suppression Mechanic (2)

Electrician, Maintenance (2) High Voltage Electrician (1) Fire Alarm System Mechanic (.5) Fuels Mechanic (1) Carpenter (1) Roofer (1) 21.5

PM for Facilities/Infrastructure

DMAG

COLS 3 - ORM (>4.5)

X008

HVAC/R Technician (4) Electronics Technician, Maintenance II (1) Electronics Technician, Maintenance III (1) General Maintenance Worker (1) Data Entry (1) Plumbers (2) Backflow Prevention Technician (1) Fire Suppression Mechanic (1)

Electrician, Maintenance (2) High Voltage Electrician (1) Fire Alarm System Mechanic (.5) Fuels Mechanic (1) Carpenter (1) Roofer (1)

18.5

PM for Facilities/Infrastructure

DMAG

COLS 4 - ORM (>4.7)

X008

HVAC/R Technician (3) Electronics Technician, Maintenance II (1) Electronics Technician, Maintenance III (1) General Maintenance Worker (1) Plumbers (2) Backflow Prevention Technician (1) Fire Suppression Mechanic (.5)

Electrician, Maintenance (2) High Voltage Electrician (1) Fire Alarm System Mechanic (.5) Fuels Mechanic (1) Carpenter (1) Roofer (1)

PM for Facilities/Infrastructure

U.S. Navy (less Base Wide, DMAG, DLA, & work covered in CLINS 13-25)

COLS 1 - 100% of PM Workload

X009

HVAC/R Technician (1) Plumbers (0.25) Electrician, Maintenance (0.25) Fire Alarm System Mechanic (.25) Roofer (0.5), Carpenter (0.5) ,Fuels Mechanic (0.5) Fire Suppression Mechanic (.25)

3.5

PM for Facilities/Infrastructure

U.S. Navy

COLS 2 - ORM (>4)

X009

HVAC/R Technician (0.5) Plumbers (0.25) Electrician, Maintenance (0.25) Fire Alarm System Mechanic (0.25) Roofer (0.5), Carpenter (0.5) ,Fuels Mechanic (0.5) Fire Suppression Mechanic (.25)

PM for Facilities/Infrastructure

U.S. Navy

COLS 3 - ORM (>4.15)

X009

HVAC/R Technician (0.5) Plumbers (0.5) Electrician, Maintenance (0.25) Fire Alarm System Mechanic (0.25) Roofer(0.25), Carpenter(0.25) ,Fuels Mechanic (0.25) Fire Suppression Mechanic (.25)

2.5

PM for Facilities/Infrastructure

U.S. Navy

COLS 4 - ORM (>4.25)

X009

HVAC/R Technician (0.25) Plumbers (0.25) Electrician, Maintenance (0.25) Fire Alarm System Mechanic (0.25) Roofer (0.25), Carpenter (0.25),Fuels Mechanic (0.25) Fire Suppression Mechanic (.25)

PM for Facilities/Infrastructure

DLA (less Base Wide, DMAG, Navy, & work covered in CLINS 13-25)

COLS 1 - 100% of PM Workload

X010

HVAC/R Technician (1) Plumbers (1) Electrician, Maintenance (1) Fire Alarm System Mechanic (.25) General Maintenance Worker (1) Fire Suppression Mechanic (.25)

4.5

PM for Facilities/Infrastructure

DLA

COLS 2 - ORM (>4.0)

X010

HVAC/R Technician (1) Plumbers (1) Electrician, Maintenance (1) Fire Alarm System Mechanic (.25) General Maintenance Worker (.5) Fire Suppression Mechanic (.25)

PM for Facilities/Infrastructure

DLA

COLS 3 - ORM (>4.15)

X010

HVAC/R Technician (1) Plumbers (1) Electrician, Maintenance (.5) Fire Alarm System Mechanic (.25) General Maintenance Worker (.5) Fire Suppression Mechanic (.25)

3.5

Position Titles (FTE)

PM for Facilities/Infrastructure

DLA

COLS 4 - ORM (>4.7)

X010

HVAC/R Technician (1) Plumbers (.5) Electrician, Maintenance (.5) Fire Alarm System Mechanic (.25) General Maintenance Worker (.5) Fire Suppression Mechanic (.25)

WOAP Execution

COLS 1 - 50,000 man-hours (mh) X011

HVAC/R Technician (4) Plumber (4) Electrician, Maintenance (4) Sheet Metal Technician (1) General Maintenance Worker (4)

Machinery Maintenance Mechanic (1) Machinist, Maintenance (1) Pipefitter, Maintenance (4) Carpenter (1) 24

WOAP Execution

COLS 2 - 45,000 mh X011

HVAC/R Technician (3) Plumber (4) Electrician, Maintenance (3) Sheet Metal Technician (1) General Maintenance Worker (4)

Machinery Maintenance Mechanic (1) Machinist, Maintenance (1) Pipefitter, Maintenance (3.6) Carpenter (1) 21.6

WOAP Execution

COLS 3 - 40,000 mh X011

HVAC/R Technician (3) Plumber (3) Electrician, Maintenance (3) Sheet Metal Technician (1) General Maintenance Worker (4)

Machinery Maintenance Mechanic (1) Machinist, Maintenance (1) Pipefitter, Maintenance (2.2) Carpenter (1)

19.2

WOAP Execution

COLS 4 - 35,000 mh X011

HVAC/R Technician (3) Plumber (3) Electrician, Maintenance (3) Sheet Metal Technician (1)

General Maintenance Worker (3.8) Pipefitter, Maintenance (2) Carpenter (1)

16.8

WOAP Execution

COLS 5 - 30,000 mh X011

HVAC/R Technician (3) Plumber (2.2) Electrician, Maintenance (3) Sheet Metal Technician (1)

General Maintenance Worker (2.2) Pipefitter, Maintenance (2) Carpenter (1)

14.4

WOAP Execution

COLS 6 - 25,000 mh X011

HVAC/R Technician (3) Plumber (2) Electrician, Maintenance (2) Sheet Metal Technician (1)

General Maintenance Worker (2) Pipefitter, Maintenance (1) Carpenter (1)

Repair & Maintenance Pavements and Fence

COLS 1 - 100%

X012

Equipment Operator (6.75) Heavy Equipment Mechanic ( 0.25)

Repair & Maintenance Pavements and Fence

COLS 2 - DSWs only X012

Equipment Operator (5.75) Heavy Equipment Mechanic (0.25)

Exterior Water Distribution & Sanitary Sewer Systems X013

Plumber (2)

Exterior Natural Gas Distribution Systems X014 Plumber (2)

Flood Gates & Exterior Storm Water Distribution Systems X015

Plumber (2.75)

2.75

Generators (Power Production) X016 Power Production Technician (2) Heavy Equipment Mechanic (3) 5

Metering and Metering Management

COLS 1 - 100%

X017

Data Entry (2) Meter reader (2)

Position Titles (FTE)

Metering and Metering Management

COLS 2 - Manual Meter Read & DSW X017

Data Entry (1) Meter reader (2) 3

Pest Management

COLS 1 - 10 Million Square Feet (Msf) annually

& 100% DSW

X018

Pest Controller (2)

Pest Management

COLS 2 - 10 Msf annually & 75% DSW X018

Pest Controller (2)

Pest Management

COLS 3 - 7 Msf annually & 50% DSW X018

Pest Controller (1.5) 1.5

Pest Management

COLS 4 - 50% DSW

X018

Pest Controller (1)

ECPs Snow & Ice Removal

COLS 1 - 100% (see map)

X019 Equipment Operator (1) 1

ECPs

COLS 2 - Red, Yellow, & Green (see map) X019 Equipment Operator (.65) 0.65

ECPs

COLS 3 - Red & Yellow (see map) X019

Equipment Operator (.5)

0.5

ECPs

COLS 4 - Red ( see map) X019

Equipment Operator (.3)

0.3

Pavements - Base Wide (Streets) Snow & Ice Removal

COLS 1 - 100% (see map)

X020

Equipment Operator (.75) Heavy Equipment Mechanic (.75)

1.5

Pavements - Base Wide (Streets)

COLS 2 - Red, Yellow & Green (see map) X020

Equipment Operator (.5) Heavy Equipment Mechanic (.25)

0.75

Pavements - Base Wide (Streets)

COLS 3 - Red & Yellow (see map) X020

Equipment Operator (.25) Heavy Equipment Mechanic (.25) 0.5

Pavements - Base Wide (Streets)

COLS 4 - Red (see map) X020

Equipment Operator (.15) Heavy Equipment Mechanic (.1) 0.25

Pavements - Base Wide (Airfield, less DMAG)) Snow & Ice Removal X021

Equipment Operator (1.75)

1.75

Pavements - DMAG (Airfield less Base Wide) Snow & Ice Removal

Labor X022

Equipment Operator (.75)

0.75

Pavements - Base Wide (Streets) Sweeping

COLS 1 - 100%

X023

Equipment Operator (2)

Pavements - Base Wide (Streets)

COLS 2 - Red & Yellow (see Map) X023

Equipment Operator (1.5)

1.5

Pavements (Streets)

COLS 3 - Red (see Map) X023

Equipment Operator (1)

Pavements - Base Wide (Airfield less DMAG) Sweeping X024 Equipment Operator (1) 1

Position Titles (FTE)

Pavements - DMAG (Airfield less Base Wide) Sweeping X025 Equipment Operator (1) 1

Predictability Based Maintenance Program (PdM) (DMAG) X026

CRE (1)

Mechanical Analyst (1) Electrician (1) Pipefitter (1) Machine Mechanic (1)

Journeyman Electrician (1) Control Technician (1) Journeyman HVAC (2) RCM Tech (3) 12

Building Automation System Program (BAS) X027

HVAC/R Technician (1) Electronics Technician, Maintenance II (1) Electronics Technician, Maintenance III (1) General Maintenance (1)

Retro-Commissioning (RcX) Program X028

HVAC/R Technician (1) Electronics Technician, Maintenance II (1) Electronics Technician, Maintenance III (1) Engineer (1)

Appliance Maintenance X029

HVAC Tech (1) Electrician Tech (0.5) Plumber (0.5)

Furnishings Management X030 General Mainenance Worker (1) 1

Change of Occupancy Maintenance X031 General Mainenance Worker (2)

B3001 - Boiler Plant and Steam Distribution System

(Operations, DSWs & PM) X032 Boiler Operator (6.5) 6.5

B3001 & B-9301 - Chillers and Chilled Water Distribution System

(Operations, DSWs & PM) X033 Maintenance Trades Helper (1)

Boiler/Chiller Operator (8)

B3001 & B9301 - Compressors and Compressed Air Loop Distribution System

(Operations, DSWs & PM) X034

Electronic Technician III (1) Electronic Technician II (1) Electronic Technician II (1)

B9301 - Boiler Plant and Steam Distribution System

(Operations, DSWs & PM) X035 Boiler Operator (4.5)

4.5

Industrial Wastewater Treatment Plant (IWTP) - Plant and Collection System (Operations, DSWs & PM)

X036

IWTP Operator (7) Lab Analyst (1) Machinery Maintenance Mechanic (2.2) Electronics Technician, Maintenance II (1) 11.2

Facility Managers Program X037 Administrative Clerk (1)

Barcoding Program X038 General Maintenance (1) 1

Denial Barrier Maintenance Maintenance/Work

(Base Wide) X039

Electronics Tech, Maint II (0.5) General Maintenance (0.5)

Self-Help Program X040 General Maintenance (3) Administrative Clerk (2) 5

CE Virtual LAN (VLAN) X041 Electronics Tech, Maint II (1) Electronics Tech, Maint. III (1) 2

Maintenance Engineering Support X042

Engineering Technician-(Mechanical) (2) Engineering Technician-(Electrical) (1) Engineering Technician-(General) (1) Engineering Technician-(Civil) (1)

Civil Engineer Material Acquisition System

(CEMAS) X043

HazMat Coordinator (1) Property Control Specialist (0.5) Material Supply Clerk (0.75)

Material Expeditor (0.25) Warehouse Specialist (0.25) 2.75

CAP Management - FO X044

HazMat Coordinator (1) Property Control Specialist (0.5) Material Supply Clerk (0.75)

Material Expeditor (0.25) Warehouse Specialist (0.25) 2.75

Position Titles (FTE)

CAP Management - SRM X045

HazMat Coordinator (1) Property Control Specialist (0.5) Material Supply Clerk (0.75)

Material Expeditor (0.25) Warehouse Specialist (0.25)

2.75

Required General Services Required General Services – FO X048 Administrative Assistant (0.30) 0.3

Required General Services - SRM X049 Administrative Assistant (0.25) 0.25

Required General Services - DMAG X050 Administrative Assistant (0.25) 0.25