Attachment_3_-_Roofing_Typical_and_Most_Difficult_Project_Descriptions_(Reference).xlsx

Instructions

This document serves as a reference to assist Offerors in developing their IDIQ pricing. This reference consists of sample roof replacement projects of typical complexity for each of the eleven roof types. It is not required to be submitted to the Government. The reference should be used to develop Typical and Most Difficult project pricing for each roof type at each base in the region being proposed, and those prices will be input into a different MS-Excel workbook (Attachment 2 - Roofing Price Matrix).

This workbook contains the sample projects for each of the eleven in-scope roof types, and provides each Offeror a basis to determine the Unit Price for the assembly and work identified. It calls out the "take-off" for the quantities of work to be included in the roofing assemblies for the Typical and Most Difficult unit price. For example, the APP Modified Bitumen roof type calls out twenty-two (22) quantities/CSI Masterformat Line Numbers/Descriptions/Unit for items of work to be developed into unit pricing. The unit prices that are devloped for the twenty-two items of work are marked-up with non-roofing work allowances/general conditions (overhead and profit). Once the Offeror has developed its unit prices, it shall transfer the unit prices to the roofing price matrix workbook (entering unit prices by roof type in Row 7 to Row 17) and adjust the unit prices by your process to insure any locality cost exposure is included in your base pricing.

Workbook Navigation This workbook contains twelve worksheets including these instructions. Aside from the Instructions, there is one worksheet for each of the eleven in-scope roof types. Assembly components for the roof type sample project are listed down the first column. Each table in the worksheet provides the material Quantity, Unit of measure, Construction Specification Institutes (CSI) Masterformat Number, and Description.

Information Needed to Develop Valid Pricing There are two sets of pricing that must be developed, Typical and Most Difficult. The Typical cost represents a project of typical complexity - common or average cost to do a roofing project by type. It does not represent the standard USAF commercial roof as each actual task order roof will have varied features. The Most Difficult cost represents the project of the highest complexity by type. The most difficult project pricing is for a project which is more difficult than the IDIQ typical projects.

Typical Project Pricing: The Offeror is provided the components of the typical projects in Construction Specification Institutes (CSI) Masterformat Number, Description, Unit and Quantity. The Offerors shall provide a Not-To-Exceed (NTE) unit price for each roof type for the entire project only on the bid document (Attachment 2 - Roofing Price Matrix) for the typical project. The offeror will develop their typical project unit prices based on their own cost information (labor (wage rates), equipment, material costs, overhead and profit) for their companies for work at each base in the region to do roofing replacement and repair construction services. The roofing typical projects are replacement roofing projects. Offerors will not conduct site visits to any bases or contact any bases, as these are sample roofing projects and do not represent any actual or specific task order project.

The low slope roof typical projects are all 30,000 gross square feet (the field of the roof) and consist of the Asphalt Built-up Roof Project, SBS Modified Bitumen Roof Project, APP Modified Bitumen Roof Project, EPDM Single Ply Roof Project, PVC Single Ply Roof Membrane Project, SPF Membrane Project, and Metal (Hydrostatic) Roof Project. All low slope roofs are on single story buildings with only one roof type per project and the height of the roof is approximately 40 feet +/- 3 feet above the finished grade of the building site.

The steep slope roof typical projects are all 15,000 gross square feet (the field of the roof) and consist of an Asphalt Shingle Roof Project, Tile Roof Project, Slate Roof Project, and Metal Roof Project. All steep roofing projects will be in compliance with the local building codes in regards to pitch and are on a single story building (single level – wall height above the finished grade of the foundation of 20 feet) with only one roof type per project.

For the purposes of producing valid pricing, the following assumptions apply for both low-slope and steep slope roofing sample projects.

The low slope roof Most Difficult projects are all 30,000 gross square feet (the field of the roof) and consist of the Asphalt Built-up Roof Project, SBS Modified Bitumen Roof Project, APP Modified Bitumen Roof Project, EPDM Single Ply Roof Project, PVC Single Ply Roof Membrane Project, SPF Membrane Project, and Metal (Hydrostatic) Roof Project. The low slope roofs are on either multi-story buildings or airfield hangers with only one roof type per project and the height of the roof is either approximately 20 feet +/- 3 feet per story up to 6 stories above the finished grade of the building site or greater than 180 feet for airfield hangers/large commercial structures.

The steep slope roof Most Difficult projects are all 15,000 gross square feet (the field of the roof) and consist of an Asphalt Shingle Roof Project, Tile Roof Project, Slate Roof Project, and Metal Roof Project. All steep roofing projects will be in compliance with the local building codes in regards to pitch and are either multi-story buildings (wall height above the finished grade of the foundation of 20 feet per story up to 6 stories) or single story greater than 20 feet with only one roof type per project. Additionally, the following applies to both low-slope and steep slope roofing:

Please note that for task order awards, the base Contracting Officer will determine whether each roofing project is considered "Typical" or "Most Difficult", and this determination shall be final.

U.S. Air Force Solicitation RFP 8056-14-R-0001 &F &A

&D &P of &N

Example-Asphalt Shingle Example - Asphalt Shingle

Data Release : Year 2013 Unit Cost Estimate

Please note: The Roofing Cost Per Square Foot Price calculated in your proposal must account for the non-Division 7 Items described in the Request For Proposal Section C (Statement Of Work ), Paragraphs 2.1 and 2.2. Non-Division 7 items of work can be as much as 20% of the total roofing cost.

&F &A

&P of &N

Asphalt Built-Up Roof Asphalt Built-up Roof

Data Release : Year 2013 Unit Cost Estimate

Please note: The Roofing Cost Per Square Foot Price calculated for your proposal must account for the non-Division 7 Items described in the Request For Proposal Section C (Statement Of Work ), Paragraphs 2.1 and 2.2. Non-Division 7 items of work can be as much as 20% of the total roofing cost.

FAR Part 36.204 -- Disclosure of the Magnitude of Construction Projects: The estimated price is between $500,000 and $1,000,000.

U.S. Air Force Solicitation RFP 8056-14-R-0001 &F &A

&D &P of &N

APP Modified Bitumen APP Modified Bitumen

Data Release : Year 2013 Unit Cost Estimate

Please note: The Roofing Cost Per Square Foot Price calculated in your proposal must account for the non-Division 7 Items described in the Request For Proposal Section C (Statement Of Work ), Paragraphs 2.1 and 2.2. Non-Division 7 items of work can be as much as 20% of the total roofing cost.

FAR Part 36.204 -- Disclosure of the Magnitude of Construction Projects: The estimated price is between $500,000 and $1,000,000.

U.S. Air Force Solicitation RFP 8056-14-R-0001 &F &A

&D &P of &N

SBS Modified Bitumen SBS Modified Bitumen

Data Release : Year 2013 Unit Cost Estimate

Please note: The Roofing Cost Per Square Foot Price calculated in your proposal must account for the non-Division 7 Items described in the Request For Proposal Section C (Statement Of Work ), Paragraphs 2.1 and 2.2. Non-Division 7 items of work can be as much as 20% of the total roofing cost.

FAR Part 36.204 -- Disclosure of the Magnitude of Construction Projects: The estimated price is between $500,000 and $1,000,000.

U.S. Air Force Solicitation RFP 8056-14-R-0001 &F &A

&D &P of &N

EPDM Single Ply Membrane EPDM Single Ply Membrane

Data Release : Year 2013 Unit Cost Estimate

Please note: The Roofing Cost Per Square Foot Price calculated in your proposal must account for the non-Division 7 Items described in the Request For Proposal Section C (Statement Of Work ), Paragraphs 2.1 and 2.2. Non-Division 7 items of work can be as much as 20% of the total roofing cost.

FAR Part 36.204 -- Disclosure of the Magnitude of Construction Projects: The estimated price is between $500,000 and $1,000,000.

U.S. Air Force Solicitation RFP 8056-14-R-0001 &F &A

&D &P of &N

PVC Single Ply Membrane PVC Single Ply Membrane

Data Release : Year 2013 Unit Cost Estimate

Please note: The Roofing Cost Per Square Foot Price calculated in your proposal must account for the non-Division 7 Items described in the Request For Proposal Section C (Statement Of Work ), Paragraphs 2.1 and 2.2. Non-Division 7 items of work can be as much as 20% of the total roofing cost.

FAR Part 36.204 -- Disclosure of the Magnitude of Construction Projects: The estimated price is between $500,000 and $1,000,000.

U.S. Air Force Solicitation RFP 8056-14-R-0001 &F &A

&D &P of &N

SPF Membrane SPF Membrane

Data Release : Year 2013 Unit Cost Estimate

Please note: The Roofing Cost Per Square Foot Price calculated in your proposal must account for the non-Division 7 Items described in the Request For Proposal Section C (Statement Of Work ), Paragraphs 2.1 and 2.2. Non-Division 7 items of work can be as much as 20% of the total roofing cost.

FAR Part 36.204 -- Disclosure of the Magnitude of Construction Projects: The estimated price is between $500,000 and $1,000,000.

U.S. Air Force Solicitation RFP 8056-14-R-0001 &F &A

&D &P of &N

Metal Low Slope Metal Hydrostatic Low Slope

Data Release : Year 2013 Unit Cost Estimate

Please note: The Roofing Cost Per Square Foot Price calculated in your proposal must account for the non-Division 7 Items described in the Request For Proposal Section C (Statement Of Work ), Paragraphs 2.1 and 2.2. Non-Division 7 items of work can be as much as 20% of the total roofing cost.

FAR Part 36.204 -- Disclosure of the Magnitude of Construction Projects: The estimated price is between $500,000 and $1,000,000.

U.S. Air Force Solicitation RFP 8056-14-R-0001 &F &A

&D &P of &N

Asphalt Shingle Asphalt Shingle

Data Release : Year 2013 Unit Cost Estimate

Please note: The Roofing Cost Per Square Foot Price calculated in your proposal must account for the non-Division 7 Items described in the Request For Proposal Section C (Statement Of Work ), Paragraphs 2.1 and 2.2. Non-Division 7 items of work can be as much as 20% of the total roofing cost.

FAR Part 36.204 -- Disclosure of the Magnitude of Construction Projects: The estimated price is between $100,000 and $250,000.

U.S. Air Force Solicitation RFP 8056-14-R-0001 &F &A

&D &P of &N

Slate Slate Roof

Data Release : Year 2013 Unit Cost Estimate

Please note: The Roofing Cost Per Square Foot Price calculated in your proposal must account for the non-Division 7 Items described in the Request For Proposal Section C (Statement Of Work ), Paragraphs 2.1 and 2.2. Non-Division 7 items of work can be as much as 20% of the total roofing cost.

FAR Part 36.204 -- Disclosure of the Magnitude of Construction Projects: The estimated price is between $250,000 and $500,000.

U.S. Air Force Solicitation RFP 8056-14-R-0001 &F &A

&D &P of &N

Tile Tile Roof

Data Release : Year 2013 Unit Cost Estimate

Please note: The Roofing Cost Per Square Foot Price calculated in your proposal must account for the non-Division 7 Items described in the Request For Proposal Section C (Statement Of Work ), Paragraphs 2.1 and 2.2. Non-Division 7 items of work can be as much as 20% of the total roofing cost.

FAR Part 36.204 -- Disclosure of the Magnitude of Construction Projects: The estimated price is between $250,000 and $500,000.

U.S. Air Force Solicitation RFP 8056-14-R-0001 &F &A

&D &P of &N

Metal Roof Pitched Metal Roof Pitched

Data Release : Year 2013 Unit Cost Estimate

Please note: The Roofing Cost Per Square Foot Price calculated in your proposal must account for the non-Division 7 Items described in the Request For Proposal Section C (Statement Of Work ), Paragraphs 2.1 and 2.2. Non-Division 7 items of work can be as much as 20% of the total roofing cost.

FAR Part 36.204 -- Disclosure of the Magnitude of Construction Projects: The estimated price is between $250,000 and $500,000.

U.S. Air Force Solicitation RFP 8056-14-R-0001 &F &A

&D &P of &N