Solicitation - FA664826Q0009 (MODEL CONTRACT) dated 8-17-2026.pdf

SOLICITATION, OFFER, 2. TYPE OF SOLICITATION 3. DATE ISSUED PAGE 1 OF 25

AND AWARD □ SEALED BID (IFB) INVITATION 24 Jul 2026

(Construction, Alteration, or Repair)

1. SOLICITATION

NUMBER

FA664826Q00090004 FOR BID

□ NEGOTIATED (RFP) REQUEST

FOR PROPOSAL

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NUMBER 5. REQUISITION/PURCHASE REQUEST NUMBER 6. PROJECT NUMBER

KYJM 26-9011

?. ISSUED BY CODE: IFA6648 8. ADDRESS OFFER TO

FA6648 482 LSS LGC

29050 CORAL SEA BLVD, ADMINISTRATIVE ONLY NO REQUISITIONS

HOMESTEAD AFB, FL 33039-1299

UNITED STATES

Nika Salemi, Email: nika.salemi.2@us.af.mil Telephone: 786-415-3646 SANDY GUITE, Email: sandy.guite@us.af.mil Telephone: 786-415-7406

9. FOR

la. NAME lb. TELEPHONE NUMBER (include area code) (NO COLLECT CALLS)

INFORMATION Nika Salemi 786-415-3646

CALL:

SOLICITATION

NOTE: In s eal ed bid solicitations "offer" and "off eror" mean "bid and "bidd er".

1 0.THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (TiUe, identifying number, date)

Project Title: FANG Covered Aircraft Parking Structures Project Location: Homestead Air Reserve Base, FL

The Contractor shall provide all personnel, equipment, tools, materials, vehicles, supervision, containers necessary to design and construct covered aircraft parking structures IAW the Performance Work Statement.

11. The contractor shall begin performance within _J_Q_ calendar days and complete it within 365 calendar days after receiving D award, lgJ notice to proceed. This performance period is lgJ mandatory D negotiable. (See FAR 52.211-10 ).

12a. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS? 12b. CALENDAR DAYS (ff "YES", indicate within how many calendar days after award in Item 12b.) 10 lgJYES ONO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

a. Sealed offers in original and _1_ copies to perform the work required are due at the place specified in Item 8 by 10:00 AM (hour) local time 28 Aug 2026 (date). If this is a sealed bid solicitation, offers will be publicly opened at that time. Sealed envelopes containing offers shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

b. An offer guarantee lgJ is, D is not required.

c. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

d. Offers providing less than _§Q_ calendar days for Government acceptance after the date offers are due will not be considered and will be rejected.

Computer generated. STANDARD FORM 1442 (REV. 1212022) Prescribed by GSA-FAR (48CFR) 53.236-1 (d)

Cr eated On:

17 Aug 2026, 13:42 PM Central DaylightTime

OFFER (Must be fully complelsd by offeror)

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code) 15. TELEPHONE NUMBER (Include area code)

16. REMITTANCE ADDRESS (Include only if different than item 14.)

CODE FACILITY CODE

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted by the Government in writing within calendar days after the date offers are due. (Insert any number equal to or greater than the minimum requirement stated in Item 13d. Failure to insert any number means the offeror accepts the minimum in Item 13d.)

AMOUNTS►

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT 0004 0003 0002 0001

NUMBER

DATE 17 Aug 2026 13 Aug 2026 10 Aug 2026 28 jul 2026

20a. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER 20b. SIGNATURE 20c. OFFER DATE {Type or print)

AWARD (To be complelsd by Go!l&mment)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN

ITEM 25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO THE UNITED

(4 copies unless otherwise specified) STATES CODE AT D 10 U.S.C 3204(a) LJ D41 U.S.C. 3304(a) LJ

26. ADMINISTERED BY I 27. PAYMENT WILL BE MADE BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

□ 28. NEGOTIATED AGREEMENT (Contractor is required to sign this document D 29. AWARD (Contractor is not required to sign this document.) Your offer on this and return_ copies to issuing office.) Contractor agrees to furnish solicitation is hereby accepted as to the items listed. This award consummates the and deliver all items or perform all work requirements identified on this form and contract, which consists of (a) the Government solicitation and your offer, and (b) any continuation sheets for the consideration stated in this contract. The rights this contract award. No further contractual document is necessary.

and obligations of the parties to this contract shall be governed by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certifications, and specifications incorporated by reference in or attached to this contract.

30a. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO SIGN 31a. NAME OF CONTRACTING OFFICER (Type or print) (Type or print)

30b. SIGNATURE 30c. DATE 31b. UNITED STATES OF AMERICA 31c. DATE

BY

Computer generated. STANDARD FORM 1442 (REV. 12/2022) BACK

Section A - Solicitation/Contract Form

FANG Covered Aircraft Parking Structures

NAICS: 236220

Size Standard: USD 45,000,000.00 Annual receipts

Small Business Type: Small Business

Set Aside Percent: 100

Product Service Code: Y1 BZ

FA664826Q00090004

Section B - Supplies or Services & Prices or Costs

Additional lnfonna11on/No1Bs

Item Supplles / Services

Performance and Payment Bonds

Product Service Code: Y1 BZ Pricing Arrangement: Firm Fixed Price

Post Award Site Investigation

Product Service Code: Y1 BZ Pricing Arrangement: Firm Fixed Price

Concept Design, delivered and government accepted

Product Service Code: Y1 BZ Pricing Arrangement: Firm Fixed Price

65% Design package, design package includes drawing set, calculations and specifications, delivered and

0004 government accepted

Product Service Code: Y1 BZ Pricing Arrangement: Firm Fixed Price

95% Design package, design package includes drawing set, calculations and specifications, delivered and

0005 government accepted

Product Service Code: Y1 BZ Pricing Arrangement: Firm Fixed Price

Issued for Construction (IFC) Design Pkg, delivered and government accepted

Product Service Code: Y1 BZ Pricing Arrangement: Firm Fixed Price

Construction Mobilization

Product Service Code: Y1 BZ Pricing Arrangement: Firm Fixed Price

Materials delivered on site, inspected and accepted by Government, Payments will be limited to invoiced material costs, up to FFP awarded price, any residual (if applicable) will be paid at final invoice.

Product Service Code: Y1 BZ Pricing Arrangement: Firm Fixed Price

Excavation Complete, Invoice approval will be subject to Davis

Bacon Payroll Compliance.

Product Service Code: Y1 BZ Pricing Arrangement: Firm Fixed Price

Soil Preparation and Compaction Complete, Invoice approval will be subject to Davis Bacon Payroll

0010 Compliance.

Quantity Unit

1 Set

1 Each

1 Set

1 Set

1 Set

1 Set

1 Job

$1.00 Each

1 Job

1 Job

Unit Price

FA664826Q00090004

Amount

Product Service Code: Y1 BZ Pricing Arrangement: Firm Fixed Price

Footing Placement, Invoice approval will be subject to Davis Bacon

Payroll Compliance.

Product Service Code: Y1 BZ Pricing Arrangement: Firm Fixed Price

Column Erection/Aircraft Structure, Invoice approval will be subject to

Davis Bacon Payroll Compliance.

Product Service Code: Y1 BZ Pricing Arrangement: Firm Fixed Price

Canopy/Covering/Roof, Invoice approval will be subject to Davis

Bacon Payroll Compliance.

Product Service Code: Y1 BZ Pricing Arrangement: Firm Fixed Price

Striping and Tie Downs, Invoice approval will be subject to Davis

Bacon Payroll Compliance.

Product Service Code: Y1 BZ Pricing Arrangement: Firm Fixed Price

Lightning Protection System, Invoice approval will be subject to

Davis Bacon Payroll Compliance.

Product Service Code: Y1 BZ Pricing Arrangement: Firm Fixed Price

Demobilization, Final Inspection, and Closeout Submittals. Invoice approval will be subject to Davis

0016 Bacon Payroll Compliance.

Product Service Code: Y1 BZ Pricing Arrangement: Firm Fixed Price

General Conditions/Mobilization PM/Super/Admin Field Staffing

Product Service Code: Y1 BZ Pricing Arrangement: Firm Fixed Price

1 Job

1 Job

1 Job

1 Job

1 Job

1 Job

1 Job

Section C - Description/Specifications/Statement of Work

Requirements

FA664826Q00090004

The Contractor shall provide all personnel, equipment, tools, materials, vehicles, supervision, containers necessary to design and construct covered aircraft parking structures IAW the Performance Work Statement.

Section D - Packaging and Marking

Section E - Inspection and Acceptance

Section F - Deliveries or Performance

Overall Contract Delivery Period

Section G - Contract Administration Data

DFARS Clauses Incorporated by Reference

Number

252.201-7000 252.232-7003 252.236-7000

Trtle

Contracting Officer's Representative.

Electronic Submission of Payment Requests and Receiving Reports.

Modification Proposals--Price Breakdown.

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area Workflow Payment lnsb'Uclions.

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause-

Effective Date

Dec 1991 Dec 2018 Dec 1991

(Jan2023)

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

FA664826Q00090004

Alternate/ Variation

Deviation Effective Date

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense

Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall-

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

2-in-1 Invoice

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

2-in-1 Invoice

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WA WF "combo" document type to create some combinations of invoice and receiving report in one step.]

FA664826Q00090004

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WA WF

Pay Official DoDAAC F87700

Issue By DoDAAC FA6648

Admin DoDAAC FA6648

Inspect By DoDAAC F5E3BC

Ship To Code F5E3BC

Ship From Code N/A

Mark For Code N/A

Service Approver (DoDAAC) F5E3BC

Service Acceptor (DoDAAC) F5E3BC

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.'?

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWFpoint otcontact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

(Contracting Officer: Insert applicable information or "Not applicable.'?

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Section H - Special Contract Requirements

Section I - Contract Clauses

FAR Clauses Incorporated by Reference

Number Tille

52.203-3 Gratuities.

52.203-6 Restrictions on Subcontractor Sales to the Government.

52.203-6 Restrictions on Subcontractor Sales to the Government. (Alternate I) 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.

52.204-9 Personal Identity Verification of Contractor Personnel.

52.204-13 System for Award Management-Maintenance. (Deviation 2026-00038) 52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026-00038) 52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters. (Deviation 2026-00038) 52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026-00038) 52.211-13 Time Extensions.

52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (Deviation 2026-00038) 52.219-6 Notice of Total Small Business Set-Aside. (Deviation 2026-00038) 52.219-8 Utilization of Small Business Concerns. (Deviation 2026-00038) 52.222-3 Convict Labor. (Deviation 2026-00038) 52.222-6 Construction Wage Rate Requirements. (Deviation 2026-00038) 52.222-7 Withholding of Funds. (Deviation 2026-00038) 52.222-8 Payrolls and Basic Records. (Deviation 2026-00038) 52.222-9 Apprentices and Trainees. (Deviation 2026-00038) 52.222-10 Compliance with Copeland Act Requirements. (Deviation 2026-00038) 52.222-11 Subcontracts (Labor Standards). (Deviation 2026-00038) 52.222-12 Contract Termination-Debarment.

52.222-13 Compliance with Construction Wage Rate Requirements and Related Regulations.

52.222-14 Disputes Concerning Labor Standards. (Deviation 2026-00038) 52.222-15 Certification of Eligibility.

52.222-35 Equal Opportunity for Veterans. (Deviation 2026-00038) 52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026-00038) 52.222-37 Employment Reports on Veterans. (Deviation 2026-00038) 52.222-40 Notification of Employee Rights Under the National Labor Relations Act. (Deviation 2026-00038) 52.222-50 Combating Trafficking in Persons. (Deviation 2026-00038) 52.222-54 Employment Eligibility Verification. (Deviation 2026-00038) 52.222-90 Addressing DEi Discrimination by Federal Contractors. (Deviation 2026-00040, Revision 1) 52.223-23 Sustainable Products. (Deviation 2026-00038) 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving.

52.228-15 Performance and Payment Bonds-Construction.

52.229-12 Tax on Certain Foreign Procurements. (Deviation 2026-00038) 52.232-33 Payment by Electronic Funds Transfer-System for Award Management.

52.232-40 Providing Accelerated Payments to Small Business Subcontractors.

52.233-3 Protest after Award. (Deviation 2026-00038) 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-00038) 52.236-2 Differing Site Conditions. (Deviation 2026-00038) 52.236-3 Site Investigation and Conditions Affecting the Work. (Deviation 2026-00038) 52.236-5 Material and Workmanship. (Deviation 2026-00038) 52.236-6 Superintendence by the Contractor. (Deviation 2026-00038) 52.236-7 Permits and Responsibilities. (Deviation 2026-00038) 52.236-8 Other Contracts. (Deviation 2026-00038) 52.236-9 Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements. (Deviation 2026-

00038) 52.236-10 Operations and Storage Areas. (Deviation 2026-00038) 52.236-11 Use and Possession Prior to Completion. (Deviation 2026-00038) 52.236-12 Cleaning Up. (Deviation 2026-00038) 52.236-13 Accident Prevention. (Deviation 2026-00038) 52.236-14 Availability and Use of Utility Services. (Deviation 2026-00038) 52.236-15 Schedules for Construction Contracts. (Deviation 2026-00038) 52.236-21 Specifications and Drawings for Construction. (Deviation 2026-00038) 52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-00038) 52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026-00038)

DFARS Clauses Incorporated by Reference

Number Trtle

252.203-7000 Requirements Relating to Compensation of Former DoD Officials.

252.203-7002 Requirement to Inform Employees of Whistleblower Rights.

252.204-7004 Antiterrorism Awareness Training for Contractors.

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

252.205-7000 Provision of Information to Cooperative Agreement Holders.

Effective Date

Apr 1984 Jun 2020 Jun 2020 Jan 2017 Jan 2011 Feb 2026 Feb 2026

Feb 2026 Feb 2026 Sep 2000 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026 May 2014 May 2014 Feb 2026 May 2014 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Apr 2026 Feb 2026 May 2024 Jun 2020 Feb 2021 Oct 2018 Mar 2023 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026

Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Feb 2026 Apr 2026

Effective Date

Sep 2011 Dec 2022 Jan 2023 May 2024 Jan 2023 Oct 2024

FA664826Q00090004

Alternate/ Variation

Deviation Effecliva

Date

Alternate I Nov 2021

Alternate/ Variation

Deviation Effecliva

Date

252.223-7008 252.225-7012 252.225-7048 252.225-7056 252.225-7060 252.226-7001

252.232-7010 252.236-7005 252.243-7002 252.247-7023

Prohibition of Hexavalent Chromium.

Preference for Certain Domestic Commodities.

Export-Controlled Items.

Prohibition Regarding Business Operations with the Maduro Regime.

Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns.

Levies on Contract Payments.

Airfield Safety Precautions.

Requests for Equitable Adjustment.

Transportation of Supplies by Sea.

FAR Clauses Incorporated by Full Text

52.211-12 Uquldal:ed Damages-Construction.

Liquidated Damages-Construction (Sept 2000)

Jan 2023 Apr 2022 Jun 2013 Jan 2023 Jun 2023 Jan 2023

Dec 2006 Dec 1991 Dec 2022 Oct 2024

(Sep2000)

FA664826Q00090004

(a) If the Contractor fails to complete the work within the time specified in the contract, the Contractor shall pay liquidated damages to the Government in the amount of

$720.19 for each calendar day of delay until the work is completed or accepted.

(b) If the Government terminates the Contractor's right to proceed, liquidated damages will continue to accrue until the work is completed. These liquidated damages are in addition to excess costs of repurchase under the Termination clause.

(End of clause)

52.219-14 Limitations on Subcontracting. (Deviation 2026-00038) (Feb2026)

LIMITATIONS ON SUBCONTRACTING (FEB 2026) (DEVIATION 2026-00038)

(a) This clause does not apply to the unrestricted portion of a partial set-aside.

(b) Definition. Similarly situated entity, as used in this clause, means a first-tier subcontractor, including an independent contractor, that-

(1) Has the same small business program status as that which qualified the prime contractor for the award (e.g., for a small business set-aside contract, any small business concern, without regard to its socioeconomic status); and

(2) Is considered small for the size standard under the North American Industry Classification System (NAICS) code the prime contractor assigned to the subcontract.

(c) Applicability. This clause applies only to-

(1) Contracts that have been set aside for any of the small business concerns identified in 19.000(a)(3);

(2) Part or parts of a multiple-award contract that have been set aside for any of the small business concerns identified in 19.000(a)(3);

(3) Contracts that have been awarded on a sole-source basis in accordance with sections 19.105, 19.106, 19.107, and 19.108;

(4) Orders expected to exceed the simplified acquisition threshold and that are set aside for small business concerns under multiple-award contracts, as described in 8.4 and 16.5;

(5) Orders, regardless of dollar value, that are set aside in accordance with sections 19.105, 19.106, 19.107, and 19.108 under multiple-award contracts, as described in

8.4 and 16.5; and

(6) Contracts using the HUBZone price evaluation preference to award to a HUBZone small business concern unless the concern waived the evaluation preference.

(d) Independent contractors. An independent contractor shall be considered a subcontractor.

(e) By submission of an offer and execution of a contract, the Contractor agrees that in performance of a contract assigned a North American Industry Classification

System (NAICS) code for-

(1) Services (except construction), it will not pay more than 50 percent of the amount paid by the Government for contract performance to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both services and supplies, the 50 percent limitation shall apply only to the service portion of the contract;

(2) Supplies (other than procurement from a nonmanufacturer of such supplies), it will not pay more than 50 percent of the amount paid by the Government for contract per1ormance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both supplies and services, the 50 percent limitation shall apply only to the supply portion of the contract;

(3) General construction, it will not pay more than 85 percent of the amount paid by the Government for contract per1ormance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 85 percent subcontract amount that cannot be exceeded; or

( 4) Construction by special trade contractors, it will not pay more than 75 percent of the amount paid by the Government tor contract per1ormance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 75 percent subcontract amount that cannot be exceeded.

(f) The Contractor shall comply with the limitations on subcontracting as follows:

(1) For contracts, in accordance with paragraphs (c)(1 ), (2), (3) and (6) of this clause

[Contracting Officer check as appropriate.]

Ill By the end of the base term of the contract and then by the end of each subsequent option period; or

D By the end of the per1ormance period for each order issued under the contract.

(2) For orders, in accordance with paragraphs (c)(4) and (5) of this clause, by the end of the per1ormance period for the order.

(g) A joint venture agrees that, in the per1ormance of the contract, the applicable percentage specified in paragraph (e) of this clause will be per1ormed by the aggregate of the joint venture participants.

(1) In a joint venture comprised of a small business protege and its mentor approved by the Small Business Administration, the small business protege shall per1orm at least 40 percent of the work per1ormed by the joint venture. Work per1ormed by the small business protege in the joint venture must be more than administrative functions.

(2) In an B(a) joint venture, the B(a) participant(s) shall per1orm at least 40 percent of the work per1ormed by the joint venture. Work per1ormed by the 8(a) participants in the joint venture must be more than administrative functions.

(End of clause)

52.225-9 Buy American-Construction Materials. (Deviation 2026-00038) (Feb2026)

Buy American-Construction Materials (Feb 2026) (Deviation 2026-00038)

(a) Definitions. As used in this clause-

Commercially available off-the-shelf (COTS) item-

(1) Means any item of supply (including construction material) that is-

(i) A commercial product (as defined in paragraph (1) of the definition of "commercial product" at Federal Acquisition Regulation (FAR) 2.101 );

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Ottered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

"Construction material" means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work.

The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.

Cost of components means-

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the construction material (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph

(1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means a domestic construction material or domestic end product that is deemed critical to U.S. supply chain resiliency. The list of critical items is at FAR

25.105.

Domestic construction material means-

(1) For construction material that does not consist wholly or predominantly of iron or steel or a combination of both-

(i) An unmanufactured construction material mined or produced in the United States; or

(ii) A construction material manufactured in the United States, if-

(A) The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029. Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic. Components of unknown origin are treated as foreign; or

(B) The construction material is a COTS item; or

(2) For construction material that consists wholly or predominantly of iron or steel or a combination of both, a construction material manufactured in the United States if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all components used in such construction material. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the construction material and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the construction material contains multiple components, the cost of all the materials used in such construction material is calculated in accordance with the definition of "cost of components".

Fastener means a hardware device that mechanically joins or affixes two or more objects together. Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws.

Foreign construction material means a construction material other than a domestic construction material.

Foreign iron and steel means iron or steel products not produced in the United States. Produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, from the initial melting stage through the application of coatings, except metallurgical processes involving refinement of steel additives. The origin of the elements of the iron or steel is not relevant to the determination of whether it is domestic or foreign.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

"United States" means the 50 States, the District of Columbia, and outlying areas.

(b) Domestic preference.

(1) This clause implements 41 U.S.C. chapter 83, Buy American, by providing a preference for domestic construction material. In accordance with 41 U.S.C. 1907, the domestic content test of the Buy American statute is waived for construction material that is a COTS item, except that for construction material that consists wholly or predominantly of iron or steel or a combination of both, the domestic content test is applied only to the iron and steel content of the construction materials, excluding COTS fasteners. The Contractor shall use only domestic construction material in performing this contract, except as provided in paragraphs (b)(2) and (b)(3) of this clause.

(2) This requirement does not apply to information technology that is a commercial product or to the construction materials or components listed by the Government as follows:

_____ _,_Contracting Officer to list applicable excepted materials or indicate "none"]

(3) The Contracting Officer may add other foreign construction material to the list in paragraph (b)(2) of this clause if the Government determines that-

(i) The cost of domestic construction material would be unreasonable.

(A) For domestic construction material that is not a critical item or does not contain critical components.

(1) The cost of a particular domestic construction material subject to the requirements of the Buy American statute is unreasonable when the cost of such material exceeds the cost of foreign material by more than 20 percent;

(2) For construction material that is not a COTS item and does not consist wholly or predominantly of iron or steel or a combination of both, if the cost of a particular domestic construction material is determined to be unreasonable or there is no domestic offer received, and the low offer is for foreign construction material that is manufactured in the United States and does not exceed 55 percent domestic content, the Contracting Officer will treat the lowest offer of foreign construction material that exceeds 55 percent domestic content as a domestic offer and determine whether the cost of that offer is unreasonable by applying the evaluation factor listed in paragraph

(b)(3)(i)(A)(1) of this clause.

(3) The procedures in paragraph (b)(3)(i)(A)(2) of this clause will no longer apply as of January 1, 2030.

(B) For domestic construction material that is a critical item or contains critical components.

(1) The cost of a particular domestic construction material that is a critical item or contains critical components, subject to the requirements of the Buy American statute, is unreasonable when the cost of such material exceeds the cost of foreign material by more than 20 percent plus the additional preference factor identified for the critical item or construction material containing critical components listed at FAR 25.105.

(2) For construction material that does not consist wholly or predominantly of iron or steel or a combination of both, if the cost of a particular domestic construction material is determined to be unreasonable or there is no domestic offer received, and the low offer is for foreign construction material that does not exceed 55 percent domestic content, the Contracting Officer will treat the lowest foreign offer of construction material that is manufactured in the United States and exceeds 55 percent domestic content as a domestic offer, and determine whether the cost of that offer is unreasonable by applying the evaluation factor listed in paragraph (b)(3)(i)(B)(1) of this clause.

(3) The procedures in paragraph (b)(3)(i)(B)(2) of this clause will no longer apply as of January 1, 2030.

(ii) The application of the restriction of the Buy American statute to a particular construction material would be impracticable or inconsistent with the public interest; or

(iii) The construction material is not mined, produced, or manufactured in the United States in sufficient and reasonably available commercial quantities of a satisfactory quality.

(c) Request for determination of inapplicability of the Buy American statute.

(1)

(i) Any Contractor request to use foreign construction material in accordance with paragraph (b)(3) of this clause shall include adequate information for Government evaluation of the request, including-

(A) A description of the foreign and domestic construction materials;

(B) Unit of measure;

(C) Quantity;

(D) Price;

(E) Time of delivery or availability;

(F) Location of the construction project;

(G) Name and address of the proposed supplier; and

(H) A detailed justification of the reason for use of foreign construction materials cited in accordance with paragraph (b)(3) of this clause.

(ii) A request based on unreasonable cost shall include a reasonable survey of the market and a completed price comparison table in the format in paragraph (d) of this clause.

(iii) The price of construction material shall include all delivery costs to the construction site and any applicable duty (whether or not a duty-free certificate may be issued).

(iv) Any Contractor request for a determination submitted after contract award shall explain why the Contractor could not reasonably foresee the need for such determination and could not have requested the determination before contract award. If the Contractor does not submit a satisfactory explanation, the Contracting Officer need not make a determination.

(2) If the Government determines after contract award that an exception to the Buy American statute applies and the Contracting Officer and the Contractor negotiate adequate consideration, the Contracting Officer will modify the contract to allow use of the foreign construction material. However, when the basis for the exception is the unreasonable price of a domestic construction material, adequate consideration is not less than the differential established in paragraph (b)(3)(i) of this clause.

(3) Unless the Government determines that an exception to the Buy American statute applies, use of foreign construction material is noncompliant with the Buy American statute or Balance of Payments Program.

(d) Data. To permit evaluation of requests under paragraph (c) of this clause based on unreasonable cost, the Contractor shall include the following information and any applicable supporting data based on the survey of suppliers:

Foreign and Domestic Construction Materials Price Comparison

Construction material description

Item 1:

Foreign construction material.

Domestic construction material.

Item 2:

Foreign construction material.

Domestic construction material.

Unit of measure Quantity Price (dollars)*

[* Include all delivery costs to the construction site and any applicable duty (whether or not a duty-free entry certificate is issued)].[List name, address, telephone number, and contact for suppliers surveyed. Attach copy of response; if oral, attach summary.][lnclude other applicable supporting information.]

(End of clause)

DFARS Clauses Incorporated by Full Text

252.204-7021 Contractor Compllance with the Cybersecurtty Mab..lrtty Model Certification Leval Requlremenls. (Nov2025)

CONTRACTOR COMPLIANCE WITH THE CYBERSECURITY MATURITY MODEL CERTIFICATION LEVEL REQUIREMENTS (NOV 2025)

(a) Definitions. As used in this clause-

"Controlled unclassified information" means information the Government creates or possesses, or information an entity creates or possesses for or on behalf of the

Government, that a law, regulation, or Governmentwide policy requires or permits an agency to handle using safeguarding or dissemination controls (32 CFR 2002.4(h)).

"Current" means-

(1) With regard to Conditional Cybersecurity Maturity Model Certification (CMMC) Status-

(i) Not older than 180 days for Conditional Level 2 (Self) assessments and Conditional Level 2 (certified third-party assessment organization (C3PAO)) assessments, with-

(A) No changes in compliance with the requirements at 32 CFR part 170 since the Conditional CMMC Status date (see 32 CFR 170.16 and 170.17); and

(B) A corresponding affirmation of continuous compliance by an affirming official (see 32 CFR 170.4); and

(ii) Not older than 180 days for Conditional Level 3 (Defense Industrial Base Cybersecurity Assessment Center (DIBCAC)) assessments, with-

(A) No changes in compliance with the requirements at 32 CFR part 170 since the Conditional CMMC Status date (see 32 CFR 170.18); and

(B) A corresponding affirmation of continuous compliance by an affirming official;

(2) With regard to Final CMMC Status-

(i) Not older than 1 year for Final Level 1 (Self), with-

(A) No changes in compliance with the requirements at 32 CFR part 170 since the Final CMMC Status date (see 32 CFR 170.15); and

(8) A corresponding affirmation of continuous compliance, not older than 1 year, by an affirming official;

(ii) Not older than 3 years for Final Level 2 (Self) assessments and Final Level 2 (C3PAO) assessments, with-

(A) No changes in compliance with the requirements at 32 CFR part 170 since the Final CMMC Status date (see 32 CFR 170.16 and 170.17); and

(8) A corresponding affirmation of continuous compliance, not older than 1 year, by an affirming official; and

(iii) Not older than 3 years for Final Level 3 (Dl8CAC) assessments, with-

(A) No changes in compliance with the requirements at 32 CFR part 170 since the Final CMMC Status date (see 32 CFR 170.18); and

(8) A corresponding affirmation of continuous compliance, not older than 1 year, by an affirming official; and

(3) With regard to affirmation of continuous compliance (32 CFR 170.22), not older than 1 year with no changes in compliance with the requirements at 32 CFR part 170.

"Cybersecurity Maturity Model Certification (CMMC) status" means the result of meeting or exceeding the minimum required score for the corresponding assessment.

The potential statuses are as follows:

(1) Final Level 1 (Self).

(2) Conditional Level 2 (Self).

(3) Final Level 2 (Self).

(4) Conditional Level 2 (C3PAO).

(5) Final Level 2 (C3PAO).

(6) Conditional Level 3 (Dl8CAC).

(7) Final Level 3 (Dl8CAC).

"Cybersecurity Maturity Model Certification unique identifier (CMMC UID)" means 10 alpha-numeric characters assigned to each CMMC assessment and reflected in the Supplier Performance Risk System (SPAS) for each contractor information system.

"Federal contract information (FCI)" means information, not intended for public release, that is provided by or generated for the Government under a contract to develop or deliver a product or service to the Government. It does not include information provided by the Government to the public, such as on public websites, or simple transactional information, such as information necessary to process payments.

"Plan of action and milestones" means a document that identifies tasks to be accomplished. It details resources required to accomplish the elements of the plan, any milestones in meeting the tasks, and scheduled completion dates for the milestones, as defined in National Institute of Standards and Technology Special Publication

800-115 (32 CFR 170.21).

(b) Framework. The Cybersecurity Maturity Model Certification (CMMC) is a framework for assessing a contractor's compliance with applicable information security protections (see 32 CFR part 170).

(c) Duplication. The CMMC assessments will not duplicate efforts from any other comparable DoD assessment, except for rare circumstances when a reassessment may be necessary, for example, when there are indications of issues with cybersecurity and/or compliance with CMMC requirements.

(d) Requirements. The Contractor shall-

(1 )(i) Have and maintain for the duration of the contract a current CMMC status at the following CMMC level, or higher: CMMC level 2 for all information systems used in performance of the contract, task order, or delivery order that process, store, or transmit FCI or CUI; and

(ii) Consult 32 CFR 170.23 related to the flowdown of the CMMC requirements, and flow down the correct CMMC level to subcontracts and other contractual instruments;

(2) Only process, store, or transmit FCI or CUI on contractor information systems that have a CMMC status at the CMMC level required in paragraph (d)(1) of this clause, or higher;

(3) Complete on an annual basis, and maintain as current, an affirmation, by the affirming official (see 32 CFR 170.4), of continuous compliance with the requirements associated with the CMMC level required in paragraph (d)(1) of this clause in the Supplier Performance Risk System (SPAS) (https.1/piee.eb.mi� for each

CMMC UID applicable to each of the contractor information systems that process, store, or transmit FCI or CUI and that are used in performance of the contract;

(4) Ensure all subcontractors and suppliers complete prior to subcontract award, and maintain on an annual basis, an affirmation, by the affirming official (see 32

CFR 170.4), of continuous compliance with the requirements associated with the CMMC level required for the subcontract or other contractual instrument for each of the subcontractor information systems that process, store, or transmit FCI or CUI and that are used in performance of the subcontract; and

(5) If the Contractor has a CMMC Status of Conditional, successfully close out a valid plan of action and milestones (32 CFR 170.21) to achieve a CMMC Status of Final.

(e) Reporting. The Contractor shall-

(1) Submit to the Contracting Officer-

(i) The CMMC UID(s) issued by SPAS for contractor information systems that will process, store, or transmit FCI or CUI during performance of the contract;

and

(ii) Any changes in the CMMC UIDs generated in SPAS throughout the life of the contract, task order, or delivery order, if applicable;

(2) Enter into SPAS the results of a current self-assessment for each CMMC UID, not covered by a C3PAO assessment or DIBCAC assessment, applicable to each of the contractor information systems that process, store, or transmit FCI or CUI and that are used in performance of the contract; and

(3) Complete in SPAS on an annual basis and maintain as current an affirmation of continuous compliance by the affirming official (see 32 CFR 170.4) for each self-assessment, C3PAO assessment, or DIBCAC assessment required under the contract in SPAS.

(f) Subcontracts. The Contractor shall-

(1) Insert the substance of this clause, including this paragraph (f) and excluding paragraph (e)(1 ), in subcontracts and other contractual instruments, including those for the acquisition of commercial products or commercial services, excluding commercially available off-the-shelf items, if the subcontract or other contractual instrument will contain a requirement to process, store, or transmit FCI or CUI; and

(2) Prior to awarding a subcontract or other contractual instrument, ensure that the subcontractor has a current CMMC certificate or current CMMC status at the

CMMC level that is appropriate for the information that is being flowed down to the subcontractor based on the requirements at 32 CFR 170.23.

252.236-7001 Contract Drawings and Specifications.

(End of clause)

CONTRACT DRAWINGS AND SPECIFICATIONS (AUG 2000)

{Aug2000)

(a) The Government will provide to the Contractor, without charge, one set of contract drawings and specifications, except publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by the Contracting Officer.

(b) The Contractor shall-

(1) Check all drawings furnished immediately upon receipt;

(2) Compare all drawings and verify the figures before laying out the work;

(3) Promptly notify the Contracting Officer of any discrepancies;

(4) Be responsible for any errors that might have been avoided by complying with this paragraph (b); and

(5) Reproduce and print contract drawings and specifications as needed.

(c) In general--

(1) Large-scale drawings shall govern small-scale drawings; and

(2) The Contractor shall follow figures marked on drawings in preference to scale measurements.

(d) Omissions from the drawings or specifications or the misdescription of details of work that are manifestly necessary to carry out the intent of the drawings and specifications, or that are customarily performed, shall not relieve the Contractor from performing such omitted or misdescribed details of the work. The Contractor shall perform such details as if fully and correctly set forth and described in the drawings and specifications.

(e) The work shall conform to the specifications and the contract drawings identified on the following index of drawings:

Title File Drawing No.

(End of clause)

Section J - List of Attachments

Number Attachment Name

Attachment 1 -

125OG Det1 Covered Parking- PWS- 2026.07.22

Attachment 2 - DB

Wage Det FL20260215 dated 5-18-2026

DAF Regulation IAW Policy Memo 26-C-13

AF 66 Schedule of Material Submittals

Construction Cost Estimate

Base Access Form Blank

AF 3064 Progress Schedule Template

NIST SP 800-171

Assessment

Attachment 8 - NIST 09 SP 800-171 Entry

Guide

Attachment 1 0 -

FA664826Q0009 Pre- Proposal Site Visit (8-10-2026)_Redacted

Attachment Descrlp11on

Performance Work Statement

Wage Determination

DAF Regulation IAW Policy Memo 26-C-13

AF 66 Schedule of Material Submittals

Construction Cost Estimate

Base Access Request Form

AF 3064 Progress Schedule

NIST SP 800-171 Assessment

NIST SP 800-171 Entry Guide

Pre-Proposal Site Visit

Reference ldentlfler

FA664826Q00090004

Date Une Item

22 Jul 2026

18 May

21 Apr 2026

23 Jul 2026

23 Jul 2026

23 Jul 2026

23 Jul 2026

23 Jul 2026

23 Jul 2026

10 Aug

Section K - Representations, Certification, & Other Statements

FAR Clauses Incorporated by Reference

Number

52.203-11 52.240-90

Tille

Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions.

Security Prohibitions and Exclusions Representations and Certifications. (Deviation 2026-00038)

DFARS Clauses Incorporated by Reference

Number

252.203-7005 252.204-7008 252.225-7055 252.225-7059

TIiie

Representation Relating to Compensation of Former DoD Officials.

Compliance with Safeguarding Covered Defense Information Controls.

Representation Regarding Business Operations with the Maduro Regime.

Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region-Representation.

FAR Clauses Incorporated by Full Text

52.229-11 Tax on Certain Foreign Procurements-Notice and Representation.

Effective Date

Sep 2024 Feb 2026

Eff…