31R4-2GRN29-3 CHG 1.pdf

TO 31R4-2GRN29-3

1 JUNE 2006 CHANGE 1 12 APRIL 2011

TECHNICAL MANUAL

CIRCUIT DIAGRAMS

INSTRUMENT LANDING SYSTEM

AN/GRN-29(V)

ELECTRICAL EQUIPMENT SHELTER S-588/G

PART NO. 083716-0001

CONTROL-INDICATOR C-10307/G

PART NO. 098299-0100

AND

INTERLOCK CONTROL C-10306/G

PART NO. 098342-0100

WILCOX ELECTRIC, INC.

THIS REVISION SUPERSEDES TO 31R4-2GRN29-3 DATED 15 JANUARY 1988

AND ALL CHANGES THROUGH CHANGE 1 DATED 1 DECEMBER 2005.

DISTRIBUTION STATEMENT C - Distribution authorized to U S. Government agencies and their contractors for administrative or operational use, 12 April 2011. Refer other requests for this document to OC-ALC/GKAAB, Tinker AFB, Oklahoma 73145-9155.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. 2751 et seq.) or Executive Order 12470. Violations of these export laws are subject to severe criminal penalties. Disseminate in accor-dance with provisions of DoD Directive 5230.25.

HANDLING AND DESTRUCTION NOTICE - Handle in compliance with distribution statement and destroy by any method that will prevent disclosure of the contents or reconstruction of the document.

PUBLISHED UNDER THE AUTHORITY OF THE SECRETARY OF THE AIR FORCE

*Zero in this column indicates an original page

A Change 1 USAF

NOTE: The portion of the text affected by the change is indicated by a vertical line in the outer margins of the page. Changes to illustrations are indicated by miniature pointing hands. Changes to wiring diagrams are indicated by shaded or screened areas.

TOTAL NUMBER OF PAGES IN THIS MANUAL IS 32, CONSISTING OF THE FOLLOWING:

Title A i - ii 1-1 - 1-2 2-1 2-2 Blank

FP-1

FP-2 Blank

FP-3

FP-4 Blank

FP-5

FP-6 Blank

FP-7

FP-8 Blank

FP-9

FP-10 Blank

FP-11

FP-12 Blank

FP-13

FP-14 Blank

FP-15

FP-16 Blank

FP-17

FP-18 Blank

FP-19

FP-20 Blank

FP-21

FP-22 Blank

FP-23

FP-24 Blank

Dates of issue for original and changed pages are:

Original . . . . . . . . . . . . . . . . 0 . . . . . . . . . .1 June 2006 Change. . . . . . . . . . . . . . . . 1 . . . . . . . . . .12 April 2011

Page No.

*Change No.

Page No

*Change No.

Page No.

*Change No.

INSERT LATEST CHANGED PAGES. DESTROY SUPERSEDED PAGES.LIST OF EFFECTIVE PAGES

i

TABLE OF CONTENTS

TO 31R4-2GRN29-3

Chapter/Para Page

LIST OF ILLUSTRATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii

1 INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

1.1 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

1.2 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

1.3 INTEGRATED CIRCUIT PIN LOCATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

1.4 SPECIAL GRAPHIC SYSMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

1.5 TEST POINT IDENTIFICATION SYMBOLS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

2 CIRCUIT DIAGRAMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 ii

Number Title Page

1-1 Integrated Circuit Pin Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 FO-1. Shelter - Wiring Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FP-1 FO-2. RC/DU Chassis, Schematic Diagram (3 Sheets). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FP-3 FO-3. RC/DU Chassis, Schematic Diagram. (2 Sheets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FP-9 FO-4. Decoder/Control Assembly, Schematic Diagram. (2 Sheets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FP-13 FO-5. Intercom Assembly, Schematic Diagram. (2 Sheets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FP-17 FO-6. Battery Backup Assembly, Schematic Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FP-21 FO-7. ICU, Schematic Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FP-23

LIST OF ILLUSTRATIONS

CHAPTER 1

INTRODUCTION

1.1 GENERAL.

Figure FO-1 is wiring diagram for shelter. Use this diagram when replacing electrical components and troubleshooting electrical circuits.

1.2 TROUBLESHOOTING.

Each electrical circuit is fed by a separate circuit breaker. This aids in isolating a problem such as a circuit breaker that trips constantly or an open circuit. Use FO-1 to troubleshoot equipment as follows:

a. Wiring for Main Power. Obstruction Light, Antenna Heater, and Circuit Breaker Panelboard.

b. Interior Connections of Circuit Breaker Panel - board.

c. Wiring for Fans and DC Circuits.

d. Wiring for Air Conditioner and Supplemental Heater

e. Wiring for Convenience Outlets 11J5 through 11J11.

f. Wiring for Convenience Outlets 11J12 through 11J16 and Incandescent Lights.

1.3 INTEGRATED CIRCUIT PIN LOCATION.

Figure 1-1 shows intergrated circuit pin locations that may be used.

1.4 SPECIAL GRAPHIC SYSMBOLS.

There are no special graphic symbols used on circuit diagrams.

1.5 TEST POINT IDENTIFICATION SYMBOLS.

a. Major test points are identified by star encircled Arabic 1 numerals, , and are used in checking overall functions of assemblies or groups of components.

b. Secondary test points are identified by encircled capital A letters, , and are used in isolating faults to stages within assemblies or subassemblies.

c. Minor test points are identified by a capital letter and A1Arabic numeral, both within a single circle, , and are used to isolate faults to components within a gate.

A

A1 1-1

Figure 1-1. Integrated Circuit Pin Locations.

16-PIN DUAL-IN-LINE

TOP VIEW

14-PIN DUAL-IN-LINE

TOP VIEW

T.O. PACKAGE

BOTTOM VIEW

18,10 OR 12

T.O. PACKAGE

BOTTOM VIEW

18,10 OR 12

29-3 F2-1 1-2

CHAPTER 2

CIRCUIT DIAGRAMS

2-1/(2-2 Blank)

FP-1/(FP-2 Blank)

FO-1. Shelter - Wiring Diagram.

CB5

N

15A

A B

CB10

CB11

15A

15A

15A

CB4

15A

CB3

60A

CB1

(GFCI)

14 AWG

PANEL BOARD

OUTSIDE OUTLET

J5

14 AWG DAMPER

B2

14 AWG

2 PL

14 AWG

14 AWG

14 AWG

14 AWG

14 AWG

14 AWG

A2

14 AWG

14 AWG

Y

B

R

14 AWGFAN

B3

14 AWG

2 PL

14 AWGDAMPER

B1

14 AWG

2 PL

14 AWG

14 AWG

CB14 30A DC MAIN

CB13 15A GFCI OBSTN LIGHT

CB12 15A BATTERY FAN

CB11 15A THERMO/FAN CTRL

CB10 15A GFCI OUTSIDE OUTLET (J5)

CB9 20A

CB8 20A

CB7 20A

CB6 15A LIGHTS

CB5 15A BATTERY CHARGER

CB4 15A BATTERY CHARGER

CB3 15A

ANT HEATER (GS)

CB2 30A A/C

CB1 60A 2 MAIN

DESIG. RATING POLES

DESCRIPTION

CIRCUIT BREAKERREF

SPARE (LOC)

BARE SOLID COPPER WIRE

(MOUNTED OVER WORK BENCH)

14 AWG

OUTSIDE

GROUND

STUD

B

N 5

G

B

G

A

TB2

MAIN

A 1

B

N

TB1

TB3

6 AWG

14 AWG

GFCI15A

CB13

4 AWG

4 AWG

EQUIPMENT CABINETS

BATTERY BOX

14 AWG

14 AWG

BATTERY

CHARGER

DC SECTION 2

14 AWG

AC

AC

14 AWG

14 AWG

14 AWG

4 AWG

4 AWG

4 AWG

OBSTN

LIGHT

CB14

30A

DC MAIN

6 AWG

CB15

20A

(GFCI)

(SPARE)

10 AWG

10 AWG

CB16

15A

(SPARE)

S2

SURGE

ARRESTER

E1

1 11

REKAERB TIUCRIC ETOMER *

CB17 20A SPARE

CB16 15A SPARE

CB15 20A GFCI SPARE

MAIN

SWITCH

14 AWG

14 AWG

14 AWG

14 AWG

BATTERY

CHARGER

CB17

20A

(SPARE)

A

B

N

G

4 AWG

14 AWG

NEUTRAL

BUS

TB4

*30A

CB2

10 AWG

10 AWG

10 AWG

J4

B

C

A

G

J

D C

B

R Y

P2J17

18 AWG

A

B

D C

A

B

P3

B

C

A

10 AWG

10 AWG

10 AWG

A1

W1 G Y1

RH

RC

18 AWG

18 AWG

18 AWG

18 AWG

B4

14 AWG

P4 J18

14 AWG

CB12

15A

14 AWG

FLOOR OUTLETS

CB7

CB8

20A

20A

12 AWG

12 AWG

J6

12 AWG

WORKBENCH OUTLETS

J7 J8 J9 J10 J11 J12 J13 J14 J15 J16

12 AWG

12 AWG

12 AWG

12 AWG

12 AWG

12 AWG

CB9

20A

12 AWG12 AWG

CB6

15A

14 AWGINCANDESCENT

LIGHTS

DS1 DS2 DS3 DS4 DS5 DS6

S3

14 AWG

14 AWG

NA B

OBSTN LIGHT

CIRCUIT

BREAKER

BATTERY

FAN

LIGHT

SWITCH

POWER ENTRY PANEL

FAN

THERMOSTAT

SREKAERB TIUCRIC

PART OF

A/C ENTRY

PANEL

AIR CONDITIONER INSTALLATION

THERMOSTAT

A/C CONTROL

AIR CONDITIONER PART OF

A/C ENTRY

PANEL

14 AWG

GS ONLY

GS ONLY

GS ONLY

14 AWG

NOTES: (UNLESS OTHERWISE SPECIFIED)

WIRE COLOR FOR DC CIRCUITS TO BE AS FOLLOWS:

GROUNDED CONDUCTOR - BLACK

UNGROUNDED CONDUCTOR - RED

4.

WIRE COLOR FOR AC CIRCUITS TO BE AS FOLLOWS:

GROUNDING CONDUCTOR - GREEN

LINE 1 UNGROUNDED CONDUCTOR - BLACK

LINE 2 UNGROUNDED CONDUCTOR - RED

GROUNDED CONDUCTOR NEUTRAL - WHITE

3.

GROUND BACK TO PANEL BOARD GROUND BUS TB4.1

PARTIAL REFERENCE DESIGNATIONS SHOWN, PREFIX WITH UNIT 11.6.

CHANGE TIME DELAY IN HEATER CONTROL BOX TO DAYTON MODEL 5X846 5

SPARE

(LOC)

ANT

HEATER

(GS)

OUTLETS (J12-J16)

OUTLETS (J6-J9)

OUTLETS (J10, J11)

LINE 2

NEUTRAL

LINE 1

GROUND

RED

BLK

RED

WHT

BLK

GRN

GRN

RED

WHT

BLK

BLK

WHT

6 AWG GRN

GRN

A

W G

RE

D

A

W G

BL

K

BARE

4 AWG

14 AWG GRN

CASE GND

BLK

14 AWG WHT

REFER TO APPLICABLE STATION MANUAL FOR CONNECTIONS.

29-3 FO2-2

FP-3/(FP-4 Blank)

FO-2. RC/DU Chassis, Schematic Diagram (Sheet 1 of 3).

FP-5/(FP-6 Blank)

FO-2. RC/DU Chassis, Schematic Diagram. (Sheet 2)

FP-7/(FP-8 Blank)

FO-2. RC/DU Chassis, Schematic Diagram. (Sheet 3)

FP-9/(FP-10 Blank)

FO-3. RC/DU Chassis, Schematic Diagram. (Sheet 1 of 2)

FP-11/(FP-12 Blank)

FO-3. RC/DU Chassis, Schematic Diagram. (Sheet 2)

FP-13/(FP-14 Blank)

FO-4. Decoder/Control Assembly, Schematic Diagram. (Sheet 1 of 2)

FO-4. Decoder/Control Assembly, Schematic Diagram. (Sheet 2) FP-15/(FP-16 Blank)

FP-17/(FP-18 Blank)

FO-5. Intercom Assembly, Schematic Diagram. (Sheet 1 of 2)

FO-5. Intercom Assembly, Schematic Diagram. (Sheet 2) FP-19/(FP-20 Blank)

FP-21/(FP-22 Blank)

FO-6. Battery Backup Assembly, Schematic Diagram.

FP-23/(FP-24 Blank)

FO-7. ICU, Schematic Diagram.