C3463M-C_Spectra_IV_SE Camera System Installation Manual.pdf

I N S T A L L A T I O N / O P E R A T I O N

C3463M-C (7/11)

23X, 27X, and 35X Dome Drives

Spectra® IV SL and Spectra IV SE Series

Contents Description

Installation Switch Settings

SW1: Receiver Address SW2 Switch 1: AD-32 Preset System SW2 Switch 2: CM9502 Setting SW2 Switch 3: Control System Compatibility SW2 Switches 4 and 5: Serial Port Settings SW2 Switches 6 to 8: Baud Settings

Dome Drive

Operation Quick Operation Guide Quick Configuration Guide Preset 95: Accessing Main Menu

CM6700/CM6800

KBD200A/KBD300A: Direct Mode Only

CM9500

CM9740/CM9760/CM9770/CM9780

KBD4000/KBD4002

MPT9500

NET300/NET350/NET4001A

Endura Workstation

VCD5000

DX4100/DX4500/DX4600/DX8100

Digital Sentry® System Software Digital Sentry DS ControlPoint

DVR5100

23X LowLight Day/Night Menu Tree

27X LowLight Day/Night Menu Tree

35X LowLight Day/Night Menu Tree

Language

System Information DIP Switch Information

Display Setup Label Positions

Dome Settings Camera

Type of Lighting Auto Focus Zoom Limit Zoom Speed Low Light Limit IR Cut Filter

Advanced Camera Settings Shutter Speed AGC Limit Auto Iris Auto Sharpness Auto White Balance Backlight Compensation Electronic Image Stabilization Wide Dynamic Range Low Lux Noise Reduction Video Level C3463M-C (7/11) 3

Field Align Low Light Sharpness Minimum Focus Distance Zoom Focus Trace

Motion Settings Auto Flip Proportional Pan Park Time Scan Speed Preset Freeze Frame Limit Stops Azimuth Zero

Auto Tracking Auto Tracking Display Setup Sensitivity Start Time Zoom Lost Action Return

Power Up Power Up Action

Line Sync Presets

Predefined Presets Configuring a Preset Creating an Action Preset Motion Detection Edit Schedule

Patterns Zones Window Blanking

Edit Schedule Reverse Clear Window Blank All Above/Blank All Below

Alarms Aux

Edit Schedule Title Text Alert

Repeat Ack Action Activate Aux Current Reading Reset Alert

Clear Password Clock Event

Event Type Event Label Edit Event Label Edit Event Clear Event List Event Holiday Edit Holiday Clear Holiday List Holidays Scheduled Events 4 C3463M-C (7/11)

Reset, Cycle Power, Reboot Reset Camera Cycle Camera Power Reboot System

Software/Language File Upload

Maintenance

Specifications 23X Models 27X Models 35X Models

Appendix C3463M-C (7/11) 5

6 CxxxxM (xx/11)

List of Illustrations 1 Default Switch Settings 2 Dome Drive Installation 3 Wide Dynamic Range Settings 4 Motion Detection Areas 5 Window Selection Tool 6 Window Blanking 7 Window Blank Tilt Angles

List of Tables A Baud Settings B Low Light Limit Settings C Stored Presets by Back Box Model D Presets for American Dynamics Controllers E Window Blank Settings F Switch Settings for SW1 Pelco P-Type Control G Switch Settings for SW1 Pelco D-Type Control

Description Spectra® IV SL and Spectra IV SE are Pelco’s premier integrated dome systems. These systems feature a high resolution camera/optics package with configurable dome drive software.

This manual is designed primarily to be a reference tool for the installation and operation of your system. Inside you will find information about features and commands, as well as a detailed menu tree and a quick start guide.

Be sure to thoroughly familiarize yourself with the information in this manual before installing and using your system.

C3463M-C (7/11) 7

Installation This manual contains installation instructions for the Spectra IV dome drive only. For complete installation instructions for a Spectra IV dome system, refer to the installation manual that was shipped with the back box.

SWITCH SETTINGS

Before installing the dome drive, you must configure the receiver address, termination, and baud setting. The DIP switches used to configure these settings are located on the base of the dome drive.

Figure 1 shows the default settings for the DIP switches. Switch SW1-1 (SW1, switch 1) is set to the ON position; all other switches are set to the OFF position.

Figure 1. Default Switch Settings

Refer to the following sections to set the address, termination, and baud settings for the dome drive.

SW1: RECEIVER ADDRESS

Set the SW1 switches for the address of the dome drive. The following information is required to set the dome drive address:

Pelco P-type control: The default address is 2. Refer to Table F on page 66 for address settings that use Pelco P-type control. The maximum number of receivers is 32.

Pelco D-type control: The default address is 1. Refer to Table G on page 67 for address settings that use Pelco D-type control. The maximum number of receivers is 254.

SW2 SWITCH 1: AD-32 PRESET SYSTEM

SW2-1 should be set to the ON position if an AD-32 controller and Pelco’s TXB-AD translator board are used to control the dome system.

SW2 SWITCH 2: CM9502 SETTING

If a CM9502 matrix system is used with the dome drive, set SW2-2 to the ON position.

SW2 SWITCH 3: CONTROL SYSTEM COMPATIBILITY

Coaxial Control Systems Although Spectra IV dome systems can operate with coaxial control systems from many manufacturers, the system is designed for optimal performance with Pelco Coaxitron® control products within the length specified for coaxial cable.

To compensate for coaxial control systems from other manufacturers, Pelco has provided DIP switch SW2-3. Setting SW2-3 to the ON position may improve dome control with these control systems.

If you are using a Pelco Coaxitron controller, leave SW2-3 in the default OFF position.

NOTES:

• This coaxial control system compatibility feature is only available for dome drive revisions A4 and later (revisions A0 and later for Spectra IV Horizon dome drives). The revision number can be found on the barcode label on the top of the dome drive. Software version 1.090 and later indicates this mode is available by placing an asterisk next to the switch number in the Dip Switch Information menu.

• In some configurations, Pelco CM9502 Series matrix systems use nonstandard Coaxitron commands for functions like pattern playback. If you experience problems with these functions, set SW2-3 to the ON position.

SW1

SW2

O N

1 2 3 4 5 6 7 8 9 10

O N

1 2 3 4 5 6 7 8 8 C3463M-C (7/11)

Pelco P Protocol Control Systems To compensate for Pelco P protocol control systems from other manufacturers, set SW2-3 to the ON position. This may improve dome control with some of these control systems.

SW2 SWITCHES 4 AND 5: SERIAL PORT SETTINGS

RS-422 Setting (Default) SW2-4 and SW2-5 should both be set to the OFF position for RS-422 setting.

For control, only two wires should be connected to the RX- and RX+ connectors on the circuit board inside the back box. For bidirectional control, four wires should be connected to the RX-, RX+, TX-, and TX+ connectors on the circuit board inside the back box.

RS-485, 4-Wire Setting SW2-4 should be set to OFF and SW2-5 should be set to ON if a 4-wire serial port connection is used with RS-485.

NOTE: This setting is most commonly used with Pelco Endura® systems.

RS-485, 2-Wire Setting SW2-4 and SW2-5 should both be set to the ON position if a 2-wire serial port connection is used with RS-485.

This setting is used to allow the Spectra dome system to transmit and receive commands on the same pair of wires. Only two wires should be connected to the RX- and RX+ connectors on the circuit board inside the back box.

SW2 SWITCHES 6 TO 8: BAUD SETTINGS

Pelco D-type controllers are set for 2400 baud. The default setting for the dome drive is 2400 baud. If you are using a Pelco D-type controller, do not reset SW2 switches 1 to 3 or SW2 switches 6 to 8.

Pelco P-type controllers can operate at 2400, 4800, and 9600 baud. Set the SW2 switches (6, 7, and 8), located on the base of the dome drive, to the same baud as the Pelco P-type controller.

SW2 Switch 9: Coaxial/UTP Cable SW2-9 should be set to the OFF position (default) if you are using coaxial cable. If you are using unsheilded twisted pair (UTP) cable, set SW2-9 to the ON position.

SW2 Switch 10: Termination Setting When connecting more than one Spectra IV dome system to a single controller, terminate the unit farthest from the controller. Termination is only required for the last dome in the series.

The dome drive is shipped from the factory in the unterminated (OFF) position. To terminate the dome drive, set SW2-10 to the ON position.

NOTE: Dome termination is not required for Coaxitron control.

Table A. Baud Settings

Switch Number SW2-6 SW2-7 SW2-8

2400 Baud (default for Pelco D-type control) Off Off Off

4800 Baud (default for Pelco P-type control) On Off Off

9600 Baud Off On Off C3463M-C (7/11) 9

DOME DRIVE

To install the dome drive:

1. Align the blue and red tabs with the blue and red arrows on the hinged door inside the back box.

2. Push the tabs in. Insert one side and then the other side.

Figure 2. Dome Drive Installation

3. Continue pushing on the ends of the tabs until both sides click into place (refer to Figure 2).

NOTE: When removing a dome drive that has been in use, caution should be taken to avoid direct contact with the top plate of the unit. This section of the unit will be warm to the touch when first removed from an operating unit.

4. Apply power to the Spectra IV dome system. The system will start a configuration sequence. When configuration is done, the following information is displayed:

Pelco Spectra IV SL/Spectra IV SE

Version X.XX

D Address: 1

P Address: 2

Comm 2400, N, 8, 1

CONFIGURE DONE

This information will remain on the monitor until dome operation begins.

NOTE: When installing a Spectra IV dome drive in a Spectra III™ back box for the first time, a message appears. When the installation is complete, the dome drive will continue with a normal configuration sequence.

10 C3463M-C (7/11)

Operation

*Digital zoom magnifies the image electronically and the picture may appear pixilated. The larger the digital zoom limit the greater the reduction in resolution.

†The dome cannot do electronic zoom in a pattern. Optical zoom will operate in a pattern.

QUICK OPERATION GUIDE

Pan and Tilt Move the joystick or press the direction keys left/right and up/down.

Zoom Far To zoom far:

1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the optical zoom limit.

2. Release the button or joystick for one second.

3. To continue zooming (digitally), press the button or turn the joystick clockwise again until you have the picture you want or reach the digital zoom* limit.

Zoom Wide Press the Zoom Wide button or turn the joystick counterclockwise.

Scanning

Stop Scan Preset 96 Random Scan Preset 97 Frame Scan Preset 98 Auto Scan Preset 99

Presets Refer to the documentation supplied with the control system.

Patterns† Refer to the documentation supplied with the control system.

Zones Refer to Zones on page 42 and to the documentation supplied with the control system.

Alarms Refer to Alarms on page 46.

Auto Flip Turn on or off in the camera menu. Refer to Auto Flip on page 30.

QUICK CONFIGURATION GUIDE

1. Configure preset 95 to access the main menu (refer to Preset 95: Accessing Main Menu on page 12).

2. Use the joystick to position the cursor beside the menu selection.

NOTE: If your controller does not have a joystick, use the up or down key.

3. Press Iris Open, the submenu/cursor moves to the right.

4. Move the joystick up or down to view the selections.

5. Press Iris Open to enter the selection.

6. Press Iris Close to cancel the selection.

C3463M-C (7/11) 11

PRESET 95: ACCESSING MAIN MENU

You can call up the main menu on your monitor by configuring (setting or creating) preset 95 (preset 28 in AD-32 preset mode).

Configuring preset 95 for Pelco’s controllers varies according to the type of controller you are using. Instructions for configuring preset 95 are given below for various Pelco controllers.

CM6700/CM6800

1. Enter the number of the Spectra IV dome system and press the CAM key.

2. Enter 95 and hold the PRESET key for two seconds.

3. In the Edit Preset menu, go to SET and press the ACK key. The main menu appears.

KBD200A/KBD300A: Direct Mode Only

1. Enter 95.

2. Hold the PRESET key (approximately five seconds) until the main menu appears on the screen.

CM9500

1. Enter the number of the Spectra IV dome system and press the CAM key. The main menu appears.

2. Highlight SETUP in the main menu and press the SELECT key.

3. Highlight CAM in the Setup menu and press the SELECT key.

4. Highlight PRESET in the Camera menu and press the SELECT key.

5. Enter 95 and press the F1 key. The main menu appears.

CM9740/CM9760/CM9770/CM9780

1. Press the ESCAPE key to open the main menu. Select DEF. The Define submenu appears.

2. Enter your four-digit PIN if this is your first time entering this mode.

3. Enter 95 and select PRST. The main menu appears.

4. Select the Quit icon to return to the default menu.

KBD4000/KBD4002

1. Press the SPOT MONITOR key.

2. Enter 95, then hold the PRESET key (approximately five seconds) until the main menu appears on the screen.

MPT9500

Extended Coaxitron or RS-485 Mode

1. Enter 95 and press the PRESET SET key.

2. Press the F2 key. The main menu appears.

NET300/NET350/NET4001A

1. Check the Set box.

2. Click the preset 95 button. The main menu appears.

12 C3463M-C (7/11)

ENDURA WORKSTATION

1. Right-click in the video pane of the Spectra IV dome system.

2. Click Preset and then click Select Preset.

3. Enter 95 and then click OK.

VCD5000

1. Enter 95 for the preset action. The shortcuts menu appears.

2. Press the Preset button on the KBD5000.

DX4100/DX4500/DX4600/DX8100

1. Click the PTZ button on the toolbar. The PTZ control appears.

2. Click the Program button on the PTZ control. The main menu appears.

DIGITAL SENTRY® SYSTEM SOFTWARE

1. Click the PTZ tab.

2. Click the right or left arrows below the Go to Preset button until Go to Preset 95 appears on the button.

3. Click the Go to Preset 95 button. The main menu appears.

DIGITAL SENTRY DS CONTROLPOINT

1. Click the PTZ Controls icon. The PTZ Control tab appears below the PTZ video frame.

2. Click the up and down arrows to display 95 in the Preset Name text box.

3. Click the Call button. The main menu appears.

DVR5100

1. While in live view mode, select a video pane that is displaying video from a Spectra IV dome system.

2. From the Main menu, click Actions. The Actions menu appears.

3. From the Actions menu, click PTZ Operations. The PTZ Operations dialog box appears.

4. In the PTZ Operations dialog box, type 95 in the text box, and then click Presets. The main menu appears.

C3463M-C (7/11) 13

23X LowLight Day/Night Menu Tree

CLEAR ALL ZONES

CLEAR ALL PRESETS

CLEAR ALL PATTERNS

CLEAR ALL WINDOW BLANKING

RESTORE FACTORY DEFAULTS

CLEAR

TEMPERATURE

DEWPOINT

PRESSURE

REFRESH

CURRENT READING

CONSTANT

ALWAYS ON

NO

REPEAT

ACK ACTION

ACTIVATE AUX

<CURRENT READING>

RESET ALERT

ALERT*

1WINDOW NUMBER

<EDIT WINDOW LOCATION>

<EDIT WINDOW ZOOM>

ENABLE WINDOW

REVERSE

CLEAR WINDOW

SET WINDOWS

GRAY

OFF

OFF

STYLE

BLANK ALL ABOVE

BLANK ALL BELOW

<SET WINDOWS>

WINDOW BLANKING

ON

OFF

ZONE NUMBER

***ZONE NOT DEFINED***

<EDIT ZONE LABEL>

<EDIT ZONE>

ZONE ENABLED

ZONE BLANKING

<CLEAR ZONE>

ZONES

ON

ON

NONE

AUTO

ON

AUTO FLIP

PROPORTIONAL PAN

PARK TIME (MINUTES)

PARK ACTION

SCAN SPEED DEG/S

PRESET FREEZE FRAME

LIMIT STOPS

<SET MANUAL STOPS>

<CLEAR MANUAL STOPS>

<SET SCAN STOPS>

<CLEAR SCAN STOPS>

<SET AZIMUTH ZERO>

<CLEAR AZIMUTH ZERO>

MOTION

AUTO

AUTO

ON

ON

OFF

HIGH

SHUTTER SPEED

AGC LIMIT

AUTO IRIS

AUTO IRIS LEVEL

AUTO IRIS PEAK

AUTO SHARPNESS

SHARPNESS LEVEL

AUTO WHITE BALANCE

R GAIN

B GAIN

BACKLIGHT COMP

VIDEO LEVEL

ADVANCED SETTINGS

T1

ON

XXXX

XXXX

TYPE OF LIGHTING

AUTO FOCUS

IR CUT FILTER

AUTO IR LEVEL

<ADVANCED SETTINGS>

CAMERA

XXX.X*

12:00:00 AM

[ZONE LABEL-------]

[PRESET LABEL-------]

[ALARM -------]

[ALERT MESSAGE---]*

[TITLE TEXT]

SAVE AND EXIT

CANCEL

HELP

NE

XX°/-XX°

MM/DD/YYYY

LABEL POSITION

2 (SECS)

2 (SECS)

2 (SECS)

2 (SECS)

OFF

2 (SECS)

ON

PRESET LABEL

ZONE LABEL

ZOOM

AZIMUTH/ELEVATION

DIRECTION

ALARM MESSAGE

DATE/TIME

<LABEL POSITIONS>

RESTORE FACTORY DEFAULTS

DISPLAY SETUP

12345678 1234567890

SW1[-------- ] SW2[-------- - - ]

SW1 1-8:

D ADDRESS 1

P ADDRESS 2

SW2 1 : 32 PRESETS. OFF

SW2 2 : CM9500 MODE. OFF

SW2 3 : COAX SPIV COMM

SW2 4-5 : RS422 <->

SW2 6-8 : COMM. 2400.N.8.1

SW2 9 : UTC SOURCE. COAX

SW2 10 : TX/RX TERM.. OFF

PRESS IRIS OPEN TO CONTINUE

DIPSWITCH INFORMATION

XXXXXX

POWER ON

0°

YES

YES

NORMAL

XXXX-XXXX

ENGLISH X.XX

ITALIANO X.XX

FREE MEMORY

LAST RESET

AZIMUTH ZERO OFFSET

MOTOR ACTIVE

CAMERA ACTIVE

VIDEO LEVEL

CAMERA MODEL

LANGUAGE 1

LANGUAGE 10

<DIPSWITCH INFORMATION>

ADDITIONAL

XXXXXXXXXXXXXX

XX-XXXX

AVAILABLE

XX.X

XX.X

XXXXXXXXXX

OFF

OFF

C

X.XX

SERIAL #

DOME DRIVE MODEL

BACK BOX MEMORY

SOFTWARE VERSION

BUILD

FONT VERSION

COMM

D ADDRESS

P ADDRESS

CM95OO MODE

32 PRESETS

PROTOCOL

PRESSURIZED*

<ADDITIONAL>

SYSTEM INFORMATION

ENGLISHLANGUAGE

<SYSTEM INFORMATION>

<DISPLAY SETUP>

<DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

SPECTRA IV

*This setting applies to Pressurized Spectra IV dome systems only. Spectra IV systems that are not pressurized will not display this menu item.

NOTE: The BACK and EXIT options do not appear in these menus due to space limitations. See the individual menus in this document for complete configurations.

14 C3463M-C (7/11)

INTERNAL CLOCK

12 HOUR

12:00 AM

MM/DD/YYYY

00/00/0000

OFF

TIME BASE

TIME FORMAT

SET TIME

DATE FORMAT

SET DATE

DAYLIGHT SAVINGS

CLOCK

OK

CANCEL

BACKSPACE

SPACE

1234567890

ABCDEFGHIJ

KLMNOPQRST

UVWXYZ.,-/

abcdefghij klmnopqrst uvwxyz#&:*

EDIT THE PASSWORD

OFFENABLE PASSWORD

<EDIT PASSWORD>

PASSWORD

ENABLE TITLE TEXT

<EDIT TITLE TEXT>

TITLE TEXT

TOGGLE

TOGGLE

AUX 1 MODE

DWELL TIME (SECS)

AUX 2 MODE

DWELL TIME (SECS)

AUX

LOW

NONE

NO

N/O

ALARM NUMBER

ALARM PRIORITY

ALARM ACTION

ACTIVATE AUX

ALARM CONTACT

ALARM SETTINGS

OFF

RESUME

SEQUENCE (SECS)

RESET DELAY (SECS)

<ALARM SETTINGS>

ALARMS

PATTERN NUMBER

<PROGRAM PATTERN>

<CLEAR PATTERN>

REFERENCE INFO

PATTERN USAGE

REMAINING

PATTERNS

1PRESET NUMBER

***PRESET NOT DEFINED***

<CREATE ACTION PRESET>

<EDIT PRESET LABEL>

<EDIT PRESET SCENE>

<EDIT CAMERA SETTINGS>

<CLEAR PRESET>

<CLEAR CAMERA SETTINGS>

REFERENCE INFORMATION

AZIMUTH

ELEVATION

ZOOM

CUSTOM CAMERA SETTINGS

PRESETS

ON

LINE SYNC

LINE SYNC PHASE

LINE SYNC

<CAMERA>

<MOTION>

<LINE SYNC>

<PRESETS>

<PATTERNS>

<ZONES>

<WINDOW BLANKING>

<ALARMS>

<AUX>

<TITLE TEXT>

<ALERT>*

<CLEAR>

<PASSWORD>

<CLOCK>

DOME SETTINGS

C3463M-C (7/11) 15

27X LowLight Day/Night Menu Tree

OFFENABLE PASSWORD

<EDIT PASSWORD>

PASSWORD

CLEAR ALL ZONES

CLEAR ALL PRESETS

CLEAR ALL PATTERNS

CLEAR ALL WINDOW BLANKING

CLEAR ALL EVENTS

RESTORE FACTORY DEFAULTS

CLEAR

TEMPERATURE

DEWPOINT

PRESURE

REFRESH

CURRENT READING

CONSTANT

ALWAYS ON

NO

REPEAT

ACK ACTION

ACTIVATE AUX

<CURRENT READING>

RESET ALERT

ALERT*

1WINDOW NUMBER

<EDIT WINDOW LOCATION>

<EDIT WINDOW ZOOM>

<EDIT SCHEDULE>

ENABLE WINDOW

REVERSE

CLEAR WINDOW

SET WINDOWS

GRAY

OFF

OFF

STYLE

BLANK ALL ABOVE

BLANK ALL BELOW

<SET WINDOWS>

WINDOW BLANKING

ON

OFF

ZONE NUMBER

***ZONE NOT DEFINED***

<EDIT ZONE LABEL>

<EDIT ZONE>

ZONE ENABLED

ZONE BLANKING

<CLEAR ZONE>

ZONES

0% 100%

PATTERN NUMBER

<PROGRAM PATTERN>

<CLEAR PATTERN>

<EDIT SCHEDULE>

REFERENCE INFO

PATTERN USAGE

REMAINING

PATTERNS

OFF

ON

HIGH

ON

STOP

OFF

AUTO TRACKING

DISPLAY SETUP

SENSITIVITY

START TIME

ZOOM

LOST ACTION

RETURN

AUTO TRACKING

ON

ON

NONE

AUTO

ON

AUTO FLIP

PROPORTIONAL PAN

PARK TIME (MINUTES)

PARK ACTION

SCAN SPEED DEG/S

PRESET FREEZE FRAME

LIMIT STOPS

<SET MANUAL STOPS>

<CLEAR MANUAL STOPS>

<SET SCAN STOPS>

<CLEAR SCAN STOPS>

<SET AZIMUTH ZERO>

<CLEAR AZIMUTH ZERO>

REFERENCE INFORMATION

MANUAL LIMITS SET

SCAN LIMITS SET

MOTION

AUTO

AUTO

ON

ON

OFF

OFF

ON

HIGH

OFF

DEFAULT

30 CM

NIGHT

SHUTTER SPEED

AGC LIMIT

AUTO IRIS

AUTO IRIS LEVEL

AUTO IRIS PEAK

AUTO SHARPNESS

SHARPNESS LEVEL

AUTO WHITE BALANCE

R GAIN

B GAIN

BACKLIGHT COMP

WIDE DYNAMIC RANGE

NEXT

BACK

EXIT

LOW LUX NOISE REDUCTION

VIDEO LEVEL

FIELD ALIGN

LOW LIGHT SHARPNESS

MINIMUM FOCUS DISTANCE

ZOOM FOCUS TRACE

ADVANCED SETTINGS

T1

NORMAL

ON

OFF

OFF

XXXX

XXXX

XXXXXX

XXXX

DUSK

OFF

TYPE OF LIGHTING

PICTURE MODE

AUTO FOCUS

SURE FOCUS

PT FOCUS LOCK

ZOOM LIMIT

ZOOM SPEED

LOW LIGHT LIMIT

IR CUT FILTER

AUTO IR LEVEL

LOW LIGHT FOCUS

<ADVANCED SETTINGS>

CAMERA

[ZONE LABEL-------]

[PRESET LABEL-------]

[ALARM --------]

[ALERT MESSAGE---]*

[TITLE TEXT]

SAVE AND EXIT

CANCEL

HELP

NE

XX°/-XX°

MM/DD/YYYY

[EVENT--]

XXX.X*

12:00:00 AM

LABEL POSITION

2 (SECS)

2 (SECS)

2 (SECS)

2 (SECS)

OFF

2 (SECS)

ON

2 (SECS)

PRESET LABEL

ZONE LABEL

ZOOM

AZIMUTH/ELEVATION

DIRECTION

ALARM MESSAGE

DATE/TIME

EVENT LABEL

<LABEL POSITIONS>

RESTORE FACTORY DEFAULTS

DISPLAY SETUP

12345678 1234567890

SW1[-------- ] SW2[-------- - - ]

SW1 1-8:

D ADDRESS 1

P ADDRESS 2

SW2 1 : 32 PRESETS. OFF

SW2 2 : CM9500 MODE. OFF

SW2 3 : COAX SPIV COMM

SW2 4-5 : RS422 <->

SW2 6-8 : COMM. 2400.N.8.1

SW2 9 : UTC SOURCE. COAX

SW2 10 : TX/RX TERM.. OFF

PRESS IRIS OPEN TO CONTINUE

DIPSWITCH INFORMATION

XXXXXX

POWER ON

0°

YES

YES

NORMAL

XXXX-XXXX

ENGLISH X.XX

ITALIANO X.XX

FREE MEMORY

LAST RESET

AZIMUTH ZERO OFFSET

MOTOR ACTIVE

CAMERA ACTIVE

VIDEO LEVEL

CAMERA MODEL

LANGUAGE 1

LANGUAGE 10

<DIPSWITCH INFORMATION>

ADDITIONAL

XXXXXXXXXXXXXX

XX-XXXX

AVAILABLE

XX.X

XX.X

XXXXXXXXXX

OFF

OFF

C

X.XX

SERIAL #

DOME DRIVE MODEL

BACK BOX MEMORY

SOFTWARE VERSION

BUILD

FONT VERSION

COMM

D ADDRESS

P ADDRESS

CM95OO MODE

32 PRESETS

PROTOCOL

PRESSURIZED*

<ADDITIONAL>

SYSTEM INFORMATION

ENGLISHLANGUAGE

<SYSTEM INFORMATION>

<DISPLAY SETUP>

<DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

SPECTRA IV

*This setting applies to Pressurized Spectra IV dome systems only. Spectra IV systems that are not pressurized will not display this menu item.

NOTE: The BACK and EXIT options do not appear in these menus due to space limitations. See the individual menus in this document for complete

16 C3463M-C (7/11)

EVENT01

ON

12:00 AM

ON

ON

ON

ON

ON

ON

ON

SKIP HOLIDAYS

PRESET

EVENT LABEL

EVENT ACTIVE

EVENT TIME

EVENT OCCURS

SUNDAY

MONDAY

TUESDAY

WEDNESDAY

THURSDAY

FRIDAY

SATURDAY

HOLIDAY

EVENT TYPE

NUMBER

EDIT EVENT

EVENT TYPE

EVENT LABEL

<EDIT EVENT LABEL>

<EDIT EVENT>

<CLEAR EVENT>

<LIST EVENT>

HOLIDAY

<EDIT HOLIDAY>

<CLEAR HOLIDAY>

<LIST HOLIDAYS>

BACK

EXIT

REFERENCE INFORMATION

EVENT

INTERNAL CLOCK

12 HOUR

12:00 AM

MM/DD/YYYY

00/00/0000

OFF

TIME BASE

TIME FORMAT

SET TIME

DATE FORMAT

SET DATE

DAYLIGHT SAVINGS

CLOCK

OK

CANCEL

BACKSPACE

SPACE

1234567890

ABCDEFGHIJ

KLMNOPQRST

UVWXYZ.,-/

abcdefghij klmnopqrst uvwxyz#&:*

EDIT THE PASSWORD

ENABLE TITLE TEXT

<EDIT TITLE TEXT>

TITLE TEXT

TOGGLE

TOGGLE

AUX 1 MODE

DWELL TIME (SECS)

AUX 2 MODE

DWELL TIME (SECS)

<EDIT SCHEDULE>

AUX

LOW

NONE

NO

N/O

ALARM NUMBER

ALARM PRIORITY

ALARM ACTION

ACTIVATE AUX

ALARM CONTACT

<EDIT SCHEDULE>

ALARM SETTINGS

OFF

RESUME

SEQUENCE (SECS)

RESET DELAY (SECS)

<ALARM SETTINGS>

ALARMS

MEDIUM

MEDIUM

MEDIUM

MEDIUM

DETECTION AREA 1

LOCATION

SENSITIVITY

DETECTION AREA 2

LOCATION

SENSITIVITY

DETECTION AREA 3

LOCATION

SENSITIVITY

DETECTION AREA 4

LOCATION

SENSITIVITY

EDIT DETECTION AREAS

MOTION DETECTION ENABLED

<EDIT DETECTION AREAS>

ACTIVATE AUX

AUX TIME (SECS)

BACK

EXIT

MOTION DETECTION

PRESET NUMBER

***PRESET NOT DEFINED***

<CREATE ACTION PRESET>

<EDIT PRESET LABEL>

<EDIT PRESET SCENE>

<EDIT CAMERA SETTINGS>

<MOTION DETECTION>

<EDIT SCHEDULE>

<CLEAR PRESET>

<CLEAR CAMERA SETTINGS>

<APPLY TO GLOBAL>

REFERENCE INFORMATION

AZIMUTH

ELEVATION

ZOOM

CUSTOM CAMERA SETTINGS

PRESETS

ON

LINE SYNC

LINE SYNC PHASE

LINE SYNC

AUTOPOWER UP ACTION

POWER UP

<CAMERA>

<MOTION>

<AUTO TRACKING>

<POWER UP>

<LINE SYNC>

<PRESETS>

<PATTERNS>

<ZONES>

<WINDOW BLANKING>

<ALARMS>

<AUX>

<TITLE TEXT>

<ALERT>*

<CLEAR>

<PASSWORD>

<CLOCK>

<EVENT>

C3463M-C (7/11) 17

35X LowLight Day/Night Menu Tree

OFFENABLE PASSWORD

<EDIT PASSWORD>

PASSWORD

CLEAR ALL ZONES

CLEAR ALL PRESETS

CLEAR ALL PATTERNS

CLEAR ALL WINDOW BLANKING

CLEAR ALL EVENTS

RESTORE FACTORY DEFAULTS

CLEAR

TEMPERATURE

DEWPOINT

PRESSURE

REFRESH

CURRENT READING

CONSTANT

ALWAYS ON

NO

REPEAT

ACK ACTION

ACTIVATE AUX

<CURRENT READING>

RESET ALERT

ALERT*

NO

WINDOW NUMBER

<EDIT WINDOW LOCATION>

<EDIT WINDOW ZOOM>

<EDIT SCHEDULE>

ENABLE WINDOW

REVERSE

CLEAR WINDOW

SET WINDOWS

GRAY

OFF

OFF

STYLE

BLANK ALL ABOVE

BLANK ALL BELOW

<SET WINDOWS>

WINDOW BLANKING

ON

OFF

ZONE NUMBER

***ZONE NOT DEFINED***

<EDIT ZONE LABEL>

<EDIT ZONE>

ZONE ENABLED

ZONE BLANKING

<CLEAR ZONE>

ZONES

0% 100%

PATTERN NUMBER

<PROGRAM PATTERN>

<CLEAR PATTERN>

<EDIT SCHEDULE>

REFERENCE INFO

PATTERN USAGE

REMAINING

PATTERNS

OFF

ON

HIGH

ON

STOP

OFF

AUTO TRACKING

DISPLAY SETUP

SENSITIVITY

START TIME

ZOOM

LOST ACTION

RETURN

AUTO TRACKING

ON

ON

NONE

AUTO

ON

AUTO FLIP

PROPORTIONAL PAN

PARK TIME (MINUTES)

PARK ACTION

SCAN SPEED DEG/S

PRESET FREEZE FRAME

LIMIT STOPS

<SET MANUAL STOPS>

<CLEAR MANUAL STOPS>

<SET SCAN STOPS>

<CLEAR SCAN STOPS>

<SET AZIMUTH ZERO>

<CLEAR AZIMUTH ZERO>

MOTION

AUTO

AUTO

ON

ON

OFF

OFF

OFF

ON

HIGH

OFF

DEFAULT

30 CM

NIGHT

SHUTTER SPEED

AGC LIMIT

AUTO IRIS

AUTO IRIS LEVEL

AUTO IRIS PEAK

AUTO SHARPNESS

SHARPNESS LEVEL

AUTO WHITE BALANCE

R GAIN

B GAIN

BACKLIGHT COMP

E. IMAGE STABILIZER

WIDE DYNAMIC RANGE

NEXT

BACK

EXIT

LOW LUX NOISE REDUCTION

VIDEO LEVEL

FIELD ALIGN

LOW LIGHT SHARPNESS

MINIMUM FOCUS DISTANCE

ZOOM FOCUS TRACE

ADVANCED SETTINGS

T1

NORMAL

ON

OFF

OFF

XXXX

XXXX

XXXXXX

XXXX

DUSK

OFF

TYPE OF LIGHTING

PICTURE MODE

AUTO FOCUS

SURE FOCUS

PT FOCUS LOCK

ZOOM LIMIT

ZOOM SPEED

LOW LIGHT LIMIT

IR CUT FILTER

AUTO IR LEVEL

LOW LIGHT FOCUS

<ADVANCED SETTINGS>

CAMERA

[ZONE LABEL-------]

[PRESET LABEL-------]

[ALARM --------]

[ALERT MESSAGE---]*

[TITLE TEXT]

SAVE AND EXIT

CANCEL

HELP

NE

XX°/-XX°

MM/DD/YYYY

[EVENT--]

XXX.X*

12:00:00 AM

LABEL POSITION

2 (SECS)

2 (SECS)

2 (SECS)

2 (SECS)

OFF

2 (SECS)

ON

2 (SECS)

PRESET LABEL

ZONE LABEL

ZOOM

AZIMUTH/ELEVATION

DIRECTION

ALARM MESSAGE

DATE/TIME

EVENT LABEL

<LABEL POSITIONS>

RESTORE FACTORY DEFAULTS

DISPLAY SETUP

12345678 1234567890

SW1[-------- ] SW2[-------- - - ]

SW1 1-8:

D ADDRESS 1

P ADDRESS 2

SW2 1 : 32 PRESETS. OFF

SW2 2 : CM9500 MODE. OFF

SW2 3 : COAX SPIV

SW2 4-5 : RS422 <->

SW2 6-8 : COMM. 2400.N.8.1

SW2 9 : UTC SOURCE. COAX

SW2 10 : TX/RX TERM.. OFF

PRESS IRIS OPEN TO CONTINUE

DIPSWITCH INFORMATION

XXXXXX

POWER ON

0°

YES

YES

NORMAL

XXXX-XXXX

ENGLISH X.XX

ITALIANO X.XX

FREE MEMORY

LAST RESET

AZIMUTH ZERO OFFSET

MOTOR ACTIVE

CAMERA ACTIVE

VIDEO LEVEL

CAMERA MODEL

LANGUAGE 1

LANGUAGE 10

<DIPSWITCH INFORMATION>

ADDITIONAL

XXXXXXXXXXXXXX

XX-XXXX

AVAILABLE

XX.X

XX.X

XXXXXXXXXX

OFF

OFF

C

X.XX

SERIAL #

DOME DRIVE MODEL

BACK BOX MEMORY

SOFTWARE VERSION

BUILD

FONT VERSION

COMM

D ADDRESS

P ADDRESS

CM95OO MODE

32 PRESETS

PROTOCOL

PRESSURIZED*

<ADDITIONAL>

SYSTEM INFORMATION

ENGLISHLANGUAGE

<SYSTEM INFORMATION>

<DISPLAY SETUP>

<DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

SPECTRA IV

*This setting applies to Pressurized Spectra IV dome systems only. Spectra IV systems that are not pressurized will not display this menu item.

NOTE: The BACK and EXIT options do not appear in the menus due to space limitations. See the individual menus in this document for complete

18 C3463M-C (7/11)

EVENT01

ON

12:00 AM

ON

ON

ON

ON

ON

ON

ON

SKIP HOLIDAYS

PRESET

EVENT LABEL

EVENT ACTIVE

EVENT TIME

EVENT OCCURS

SUNDAY

MONDAY

TUESDAY

WEDNESDAY

THURSDAY

FRIDAY

SATURDAY

HOLIDAY

EVENT TYPE

NUMBER

EDIT EVENT

EVENT TYPE

EVENT LABEL

<EDIT EVENT LABEL>

<EDIT EVENT>

<CLEAR EVENT>

<LIST EVENT>

HOLIDAY

<EDIT HOLIDAY>

<CLEAR HOLIDAY>

<LIST HOLIDAYS>

REFERENCE INFORMATION

EVENT

INTERNAL CLOCK

12 HOUR

12:00 AM

MM/DD/YYYY

00/00/0000

OFF

TIME BASE

TIME FORMAT

SET TIME

DATE FORMAT

SET DATE

DAYLIGHT SAVINGS

CLOCK

OK

CANCEL

BACKSPACE

SPACE

1234567890

ABCDEFGHIJ

KLMNOPQRST

UVWXYZ.,-/

abcdefghij klmnopqrst uvwxyz#&:*

EDIT THE PASSWORD

ENABLE TITLE TEXT

<EDIT TITLE TEXT>

TITLE TEXT

TOGGLE

TOGGLE

AUX 1 MODE

DWELL TIME (SECS)

AUX 2 MODE

DWELL TIME (SECS)

<EDIT SCHEDULE>

AUX

LOW

NONE

NO

N/O

ALARM NUMBER

ALARM PRIORITY

ALARM ACTION

ACTIVATE AUX

ALARM CONTACT

<EDIT SCHEDULE>

ALARM SETTINGS

OFF

RESUME

SEQUENCE (SECS)

RESET DELAY (SECS)

<ALARM SETTINGS>

ALARMS

MEDIUM

MEDIUM

MEDIUM

MEDIUM

DETECTION AREA 1

LOCATION

SENSITIVITY

DETECTION AREA 2

LOCATION

SENSITIVITY

DETECTION AREA 3

LOCATION

SENSITIVITY

DETECTION AREA 4

LOCATION

SENSITIVITY

EDIT DETECTION AREAS

MOTION DETECTION ENABLED

<EDIT DETECTION AREAS>

ACTIVATE AUX

AUX TIME (SECS)

MOTION DETECTION

PRESET NUMBER

***PRESET NOT DEFINED***

<CREATE ACTION PRESET>

<EDIT PRESET LABEL>

<EDIT PRESET SCENE>

<EDIT CAMERA SETTINGS>

<MOTION DETECTION>

<EDIT SCHEDULE>

<CLEAR PRESET>

<CLEAR CAMERA SETTINGS>

<APPLY TO GLOBAL>

REFERENCE INFORMATION

AZIMUTH

ELEVATION

ZOOM

CUSTOM CAMERA SETTINGS

PRESETS

ON

LINE SYNC

LINE SYNC PHASE

LINE SYNC

AUTOPOWER UP ACTION

POWER UP

<CAMERA>

<MOTION>

<AUTO TRACKING>

<POWER UP>

<LINE SYNC>

<PRESETS>

<PATTERNS>

<ZONES>

<WINDOW BLANKING>

<ALARMS>

<AUX>

<TITLE TEXT>

<ALERT>*

<CLEAR>

<PASSWORD>

<CLOCK>

<EVENT>

C3463M-C (7/11) 19

Language

EXIT

SPECTRA IV

LANGUAGE

<SYSTEM INFORMATION>

<DISPLAY SETUP>

<DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

*This setting applies to Pressurized Spectra IV dome systems only.

The language for the on-screen menus is selectable. Available languages include English, Spanish, French, German, Italian, Portuguese, Russian, Polish, Turkish, and Czech. The factory default language is English.

To change the display language:

1. Use the joystick to position the cursor beside LANGUAGE.

2. Press Iris Open. The cursor moves to the right, beside the current, selected language.

3. Move the joystick up or down to view the selections. Press Iris Open to enter the selection. All on-screen menus are changed to the selected language.

20 C3463M-C (7/11)

SPECTRA IV

LANGUAGE

<SYSTEM INFORMATION>

<DISPLAY SETUP>

<DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

BACK

EXIT

SERIAL #

DOME DRIVE MODEL

BACK BOX MEMORY

SOFTWARE VERSION

BUILD

FONT VERSION

COMM

D ADDRESS

P ADDRESS

CM9500 MODE

32 PRESETS

PROTOCOL

PRESSURIZED*

<ADDITIONAL>

SYSTEM INFORMATION

BACK

EXIT

FREE MEMORY

LAST RESET

AZIMUTH ZERO OFFSET

MOTOR ACTIVE

CAMERA ACTIVE

VIDEO LEVEL

CAMERA MODEL

LANGUAGE 1

LANGUAGE 2

LANGUAGE 3

LANGUAGE 4

LANGUAGE 5

LANGUAGE 6

LANGUAGE 7

LANGUAGE 8

LANGUAGE 9

LANGUAGE 10

<DIPSWITCH INFORMATION>

ADDITIONAL

System Information

*This setting applies to Pressurized Spectra IV dome systems only.

The System Information menu displays the dome drive model, software version, available memory, DIP switch information, and other diagnostic information.

System settings cannot be changed using this menu; this information is for reference only.

Use the following steps to display the System Information menu:

1. Use the joystick to position the cursor beside SYSTEM INFORMATION.

2. Press Iris Open. The SYSTEM INFORMATION menu opens.

DIP SWITCH INFORMATION

The DIP Switch Information menu displays the dome drive’s current DIP switch settings. This provides a way to remotely view the DIP switch settings without removing the dome drive from the back box.

DIP SWITCH INFORMATION

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 0

SW1[- - - - - - - -] SW2[- - - - - - - - - -]

SW1 1-8 :

D ADDRESS 1

P ADDRESS 1

SW2 1 : 32 PRESETS. OFF

SW2 2 : CM9500 MODE. OFF

SW2 3 : COAX SPIV

SW2 4-5 : RS422 <->

SW2 6-8 : COMM. 2400.N.8.1

SW2 9 : UTC SOURCE. COAX

SW2 10 : TX/RX TERM.. OFF

PRESS IRIS OPEN TO CONTINUE

C3463M-C (7/11) 21

Display Setup

*This setting applies to Pressurized Spectra IV dome systems only.

† Azimuth is the pan angle from zero to 359 degrees.

‡Elevation is the tilt position from zero (horizon) to –90 degrees.

EXIT

SPECTRA IV

LANGUAGE

<SYSTEM INFORMATION>

<DISPLAY SETUP>

<DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

BACK

EXIT

PRESET LABEL

ZONE LABEL

ZOOM

AZIMUTH/ELEVATION

DIRECTION

ALARM MESSAGE

DATE/TIME

EVENT LABEL

<LABEL POSITIONS>

RESTORE FACTORY DEFAULTS

DISPLAY SETUP

Display setup allows you to configure how labels are displayed on the monitor. The following labels are available:

PRESET LABEL: Identifies preset.

ZONE LABEL: Identifies zone.

ZOOM: Identifies the amount of magnification.

AZIMUTH†/ELEVATION‡: Amount of pan from zero degrees vertical and the amount of tilt from zero degrees horizontal.

DIRECTION: Displays compass direction.

ALARM MESSAGE: Displays activated alarm.

DATE/TIME: Displays current date and time.

EVENT LABEL: Displays activated event.

A preset label is displayed when a preset is called. A zone label is displayed when the system moves into a zone. The zoom ratio label is displayed when zoom is activated. Azimuth/elevation and direction labels are displayed when pan/tilt is activated. An alarm message appears on the monitor when an alarm occurs. An event label appears on the monitor when an event occurs.

The following settings are available for each label except date and time:

OFF: Label is not displayed when activated.

CONSTANT: The label is continually displayed when activated.

2 SECONDS: The label is displayed for 2 seconds after activation.

5 SECONDS: The label is displayed for 5 seconds after activation.

10 SECONDS: The label is displayed for 10 seconds after activation.

The settings for date and time are ON or OFF.

22 C3463M-C (7/11)

LANGUAGE

<SYSTEM INFORMATION>

<DISPLAY SETUP>

<DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

BACK

EXIT

PRESET LABEL

ZONE LABEL

ZOOM

AZIMUTH/ELEVATION

DIRECTION

ALARM MESSAGE

DATE/TIME

EVENT LABEL

<LABEL POSITIONS>

RESTORE FACTORY DEFAULTS

DISPLAY SETUP

[ZONE LABEL-------]

[PRESET LABEL-------]

[ALARM --------]

[ALERT MESSAGE-------]*

<TITLE TEXT>

SAVE AND EXIT

CANCEL

HELP

NE

XX°/-XX°

MM/DD/YYYY

[EVENT--]

XXX.X*

12:00:00 AM

LABEL POSITION

LABEL POSITIONS

*This setting applies to Pressurized Spectra IV dome systems only.

† Azimuth is the pan angle from zero to 359 degrees.

‡ Elevation is the tilt position from zero (horizon) to –90 degrees.

§ The alert message is the warning displayed on the monitor if pressure, temperature, or dew point inside the dome reach unacceptable levels.

Labels can be placed anywhere on the monitor. This feature allows you to customize the appearance of your monitor screen.

The following labels are not set at fixed positions:

ZONE LABEL

PRESET LABEL

ALARM

ZOOM RATIO - XXX.X*

AZIMUTH†/ELEVATION‡ - XX°/-XX°

DIRECTION - NE

ALERT MESSAGE*§

TITLE TEXT

EVENT LABEL

DATE/TIME

To set a label position:

1. Use the joystick to position the cursor beside a label.

2. Press Iris Open.

3. Use the joystick to move the label up, down, left, or right.

4. Press Iris Open.

5. Repeat steps 1 to 4 to position other labels.

6. Position the cursor next to Save and Exit. Press Iris Open to save settings and exit the menu.

C3463M-C (7/11) 23

Dome Settings

*This setting applies to Pressurized Spectra IV dome systems only.

CAMERA

EXIT

SPECTRA IV

LANGUAGE

<SYSTEM INFORMATION>

<DISPLAY SETUP>

<DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

<CAMERA>

<MOTION>

<AUTO TRACKING>

<POWER UP>

<LINE SYNC>

<PRESETS>

<PATTERNS>

<ZONES>

<WINDOW BLANKING>

<ALARMS>

<AUX>

<TITLE TEXT>

<ALERT>*

<CLEAR>

<PASSWORD>

<CLOCK>

<EVENT>

BACK

EXIT

DOME SETTINGS

TYPE OF LIGHTING

PICTURE MODE

AUTO FOCUS

SURE FOCUS

PT FOCUS LOCK

ZOOM LIMIT

ZOOM SPEED

LOW LIGHT LIMIT

IR CUT FILTER

AUTO IR LEVEL

LOW LIGHT FOCUS

<ADVANCED SETTINGS>

BACK

EXIT

CAMERA

TYPE OF LIGHTING

Pelco has calibrated settings that optimize the white balance and the picture for several lighting conditions. There are two settings:

T1 (default): For use in outdoor applications.

T2: For use in indoor applications.

Picture Mode

(Applies to 27X and 35X models only.)

Picture mode offers enhanced color and brightness depending on the scene.

Available settings are NORMAL (default) and ENHANCED. When picture mode is set to ENHANCED, the camera enhances colors and the overall picture.

NOTES:

• The scene on your monitor will darken temporarily when you change the picture mode setting.

• When Type Of Lighting is set to T1 and Picture Mode is set to Enhanced, and you change the setting for Type Of Lighting to T2, Picture Mode is no longer visible in the menu. When Type Of Lighting is returned to the T1 setting, Picture Mode becomes visible and is automatically reset to Normal.

AUTO FOCUS

Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions.

There are two auto focus settings:

ON (default): If auto focus mode is set to ON, the camera will focus automatically when using pan, tilt, and zoom (PTZ) functions.

OFF: Focus is operated manually. To focus, press the Focus Far or Focus Near button on the controller.

Sure Focus (Applies to 27X and 35X models only.)

When sure focus is enabled and all PTZ motions are stopped, the camera will attempt to find a fixed focus position and lock to an object in the scene. If a focus lock is acquired or a specific amount of time has expired with no focus lock, the focus position remains fixed until PTZ is resumed.

NOTE: If auto focus is OFF, sure focus is disabled and hidden from the menu.

24 C3463M-C (7/11)

PT Focus Lock Pan/tilt (PT) focus lock holds the focus position of the lens during PTZ to maintain accurate focus between scenes, especially during the execution of presets and in low-light scenes. There are two settings:

ON: PT focus lock is enabled.

OFF (default): PT focus lock is disabled.

ZOOM LIMIT

(Applies to 27X and 35X models only.)

Zoom limit allows the user to define a limitation on the amount of telephoto zoom. The settings vary depending on camera model.

23X (Models DD423 and DD423-X)

The default setting is 32X. The zoom limit cannot be changed for 23X models.

27X (Models DD427 and DD427-X)

The default setting is 54X. Cameras with 324X zoom (27X optical zoom and 12X digital zoom) can be set for 27X, 54X, 108X, 216X, 270X, or 324X.

35X (Models DD4CBW35 and DD4CBW35-X)

The default setting is 70X. Cameras with 420X zoom (35X optical zoom and 12X digital zoom) can be set for 35X, 70X, 140X, 280X, 350X, or 420X.

ZOOM SPEED

(Applies to 27X and 35X models only.)

Zoom speed allows the user to define the speed at which the dome will go from full wide zoom to the optical zoom.

The zoom speed is set to 4.2 seconds and cannot be changed for 23X models.

Available zoom speed settings for 27X and 35X models include:

HIGH: 3.2 seconds

MEDIUM (default): 4.6 seconds

LOW: 6.6 seconds

NOTE: When using the HIGH setting, the image may be out of focus until zooming stops.

LOW LIGHT LIMIT

(Applies to 27X and 35X models only.)

Low light limit is the maximum duration, in fractions of a second, that the electronic shutter will remain open in low light conditions. The default setting is 2. Refer to Table B for available settings.

Table B. Low Light Limit Settings

Setting Duration of Open Electronic Shutter

2 (default) 1/2 second

4 1/4 second

8 1/8 second

15 1/15 second

30 1/30 second

60 1/60 second C3463M-C (7/11) 25

IR CUT FILTER

Spectra IV dome systems have two modes of operation: color, and black-white. You can increase sensitivity in low light conditions by switching to black-white mode (removing the IR cut filter). Color mode is preferred in normal lighting conditions.

The following are the settings for the IR cut filter:

OFF: Manual operation is controlled by preset 88 (filter IN) and 89 (filter OUT).

AUTO (default): Automatic operation is controlled by the auto IR level setting.

IN: Images are always displayed in color mode.

OUT: Images are always displayed in black-white mode.

NOTE: The IN and OUT settings are available when editing camera settings through the Camera and Presets menus (refer to Camera on page 24 and Presets on page 35).

Auto IR Level

The auto IR level is the light level at which the infrared filter switches IN or OUT.

Following are the available settings for the auto IR level:

DUSK (default): Approximately 6 lux (black-white); approximately 13 lux (color).

DARK: Approximately 0.1 lux (black-white); approximately 2 lux (color).

NOTES:

• If backlight compensation is ON and the IR cut filter switches OUT in normal lighting conditions, adjust the Auto IR Level to a darker setting.

Refer to Backlight Compensation on page 28.

• Low light does not mean no light. Some type of illumination is required (street light, IR light, etc.). The camera is not sensitive to IR light when the IR cut filter is IN.

Low Light Focus (Applies to 27X and 35X models only.)

If you are using an IR illuminator, the low light focus feature of the camera can be tuned to correspond to the setting of the illuminator.

There are three low light focus settings:

OFF (default): Low light focus is not activated.

850NM: Low light focus is tuned to 850 nm (nanometers).

950NM: Low light focus is tuned to 950 nm.

26 C3463M-C (7/11)

LANGUAGE

<SYSTEM INFORMATION>

<DISPLAY SETUP>

<DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

<CAMERA>

<MOTION>

<AUTO TRACKING>

<POWER UP>

<LINE SYNC>

<PRESETS>

<PATTERNS>

<ZONES>

<WINDOW BLANKING>

<ALARMS>

<AUX>

<TITLE TEXT>

<ALERT>*

<CLEAR>

<PASSWORD>

<CLOCK>

<EVENT>

BACK

EXIT

DOME SETTINGS

SHUTTER SPEED

AGC LIMIT

AUTO IRIS

AUTO IRIS LEVEL

AUTO IRIS PEAK

AUTO SHARPNESS

SHARPNESS LEVEL

AUTO WHITE BALANCE

R GAIN

B GAIN

BACKLIGHT COMP

E. IMAGE STABILIZER

WIDE DYNAMIC RANGE

NEXT

BACK

EXIT

LOW LUX NOISE REDUCTION

VIDEO LEVEL

FIELD ALIGN

LOW LIGHT SHARPNESS

MINIMUM FOCUS DISTANCE

ZOOM FOCUS TRACE

ADVANCED SETTINGS

TYPE OF LIGHTING

PICTURE MODE

AUTO FOCUS

SURE FOCUS

PT FOCUS LOCK

ZOOM LIMIT

ZOOM SPEED

LOW LIGHT LIMIT

IR CUT FILTER

AUTO IR LEVEL

LOW LIGHT FOCUS

<ADVANCED SETTINGS>

BACK

EXIT

CAMERA

ADVANCED CAMERA SETTINGS

*This setting applies to Pressurized Spectra IV dome systems only.

SHUTTER SPEED

Shutter speed is the duration of the electronic shutter. You can configure the shutter speed to operate automatically (Auto) or manually (Numeric Value).

AUTO (default): The electronic shutter speed is set automatically by the amount of light sensed by the camera.

NUMERIC VALUE: Spectra IV dome systems have several numerical shutter speed settings. The higher the number, the faster the electronic shutter.

The slowest shutter speed setting is 2 = 1/2 second.

The fastest setting is 30,000 = 1/30,000 second.

Increasing the shutter speed lowers the light sensitivity and reduces the streaking of fast moving objects.

Set the shutter speed to 100 if you are using an NTSC camera in a 50 Hz environment. This will eliminate any flicker that may occur in the picture.

AGC LIMIT

AGC limit allows users to adjust how the system balances AGC (automatic gain control) and electronic shutter in low light conditions. As scene lighting decreases, the system will automatically adjust, adding a mixture of AGC and slow shutter according to the AGC limit setting. AGC limit can be set between 0 and 40, with 40 applying maximum AGC before slow shutter. In contrast, setting AGC limit to 0 will force the system software to apply maximum slow shutter (as defined by the low light limit setting) before any AGC is applied. The default AGC settings vary depending on camera model.

NOTE: The maximum slow shutter that the system will achieve is 1/2 second shutter (refer to Low Light Limit on page 25).

AUTO IRIS

Auto iris is the lens function that automatically opens and closes the iris in response to changing light conditions.

You can configure the auto iris to operate automatically or at a user-defined level.

OFF: Auto iris is disabled, and control is always manual.

AUTO (default): The iris is adjusted automatically to produce a constant video output as determined by the auto iris level setting.

If auto iris is in the auto mode, it will remain that way until the iris is manually opened or closed. The dome will return to auto mode when it is panned or tilted more than 15 degrees.

Auto Iris Level Auto iris level is the numeric value the auto iris uses to maintain the brightness level of the camera. Increase the value to brighten the scene.

Decrease the value to darken the scene. This setting can be adjusted if the video level in the auto iris mode is too bright or too dark.

NOTE: If backlight compensation is ON, decrease the auto iris level setting.

C3463M-C (7/11) 27

Auto Iris Peak Increasing the peak value will cause the auto iris circuit to react more to highlights or “peaks” in the picture. Decreasing this value will cause it to use the average video level to adjust the iris.

AUTO SHARPNESS

Auto sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening the edges in the picture.

There are two settings:

ON (default): The camera automatically maintains a normal sharpness mode.

OFF: The sharpness of the picture is set manually by configuring the sharpness level. Sharpness level settings range from 0 to 63.

AUTO WHITE BALANCE

This feature automatically processes the viewed image to retain color balance over a color temperature range. The default setting for auto white balance is ON.

R GAIN: Adjusts the picture output in the red range. As you change the value, you will see the color change on your monitor.

B GAIN: Adjusts the picture output in the blue range. As you change the value, you will see the color change on your monitor.

BACKLIGHT COMPENSATION

If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette. Backlight compensation (BLC) enhances objects in the center of the picture. The dome uses the center of the picture to adjust the iris. If there is a bright light source outside of this area, it will wash out to white. The camera will adjust the iris so that the object in the sensitive area is properly exposed.

There are two backlight compensation settings:

OFF (default): Backlight compensation is not activated.

ON: Backlight compensation is activated.

If backlight compensation is ON, decrease the auto iris level setting and adjust the auto IR level to a darker setting. Refer to Auto Iris on page 27 and Auto IR Level section on page 26.

ELECTRONIC IMAGE STABILIZATION

(Applies to 35X models only.)

Electronic image stabilization is a feature of the camera that can compensate for some forms of external influences. In all cases, care should be taken to make sure that any dome system is mounted to a rigid location.

In the event that vibration is introduced to the dome system, a user can select one of the electronic image stabilization settings in the menu. The available settings are OFF, 5 Hz, and 10 Hz. Users should apply each of the settings to the camera to see which one best addresses the vibration that is affecting the video quality.

Electronic image stabilization will not correct for all ranges of vibration. If either of the settings fails to eliminate the vibration seen in the video, other measures should be taken to isolate the vibration or to seek a more rigid mounting location.

NOTES:

• When electronic image stabilization is applied, digital slow shutter and wide dynamic range are disabled. Zoom, image resolution, and viewing angle are also limited when this feature is activated.

• Electronic image stabilization cannot be used while in a preset that has motion detection activated.

WIDE DYNAMIC RANGE

(Applies to 27X and 35X models only.)

Wide dynamic range (WDR) balances the brightest and darkest sections of a scene to produce a picture that is better balanced in lighting and provides more detail.

Available settings are OFF and ON; the default setting is OFF. When wide dynamic range is set to ON, the frame rate is reduced from the standard 30 to 15 frames per second (fps). Also, when this setting is ON, the iris will not close completely, even in manual mode.

28 C3463M-C (7/11)

Figure 3. Wide Dynamic Range Settings

NOTE: Wide dynamic range is disabled when electronic image stabilization is set to 5 Hz or 10 Hz.

LOW LUX NOISE REDUCTION

(Applies to 27X and 35X models only.)

Low lux noise reduction helps to reduce video noise in low light scenes. When enabled, low lux noise reduction is directly affected by the AGC settings for the dome system.

The following are the low lux noise reduction settings:

ON (default): Low lux noise reduction is enabled. As the scene darkens and AGC increases, the noise reduction effect automatically increases.

As noise reduction increases, you may also notice some afterimaging and a slight reduction in color saturation.

OFF: Low lux noise reduction is disabled.

VIDEO LEVEL

Set the video output to one of the following options:

NORMAL: 1.0 Vp-p.

HIGH (default setting): 1.2 Vp-p. to compensate for losses in video cable.

FIELD ALIGN

Field align determines whether the camera produces progressive segmented frame output (PsF) or interlaced frame output. Analog video from the camera is always output in separate fields as required for compatibility. This feature allows PsF to be recombined by an encoding device without a time difference between fields, as is typically seen from interlaced analog video output. Enabling field align requires that the encoding device you are using always combines the odd and even fields in the specified order.

There are three field alignment settings:

OFF (default): Field alignment is disabled. Use this setting if you are using an analog device/system or a digital encoder that does not support PsF.

ODD: Arranges the odd field for a particular video frame before the even field for that frame.

EVEN: Arranges the even field for a particular video frame before the odd field for that frame.

NOTES:

• If you enable field alignment by selecting ODD or EVEN, you must disable any deinterlacing settings for the encoding device to achieve maximum resolution.

• The ODD and EVEN settings require that the sensor scan mode is set to PROGRESSIVE. If field align is set to ODD or EVEN, the sensor scan mode automatically changes to PROGRESSIVE.

Wide Dynamic Range ON Wide Dynamic Range OFF C3463M-C (7/11) 29

LOW LIGHT SHARPNESS

(Applies to 27X and 35X models only.)

Low light sharpness allows you to control the video sharpness in low-light scenes. The available settings are 20, 10, DEFAULT, –10, and –20.

Increasing the value increases sharpness in low-light scenes, but also increases video noise. Decreasing the value decreases video noise in low-light scenes, but it also decreases image sharpness.

NOTE: Changing the low light sharpness causes the camera to reset, which resets all camera settings to their factory defaults.

MINIMUM FOCUS DISTANCE

(Applies to 27X and 35X models only.)

Minimum focus distance improves focus capability in low-light scenes, depending on the typical distance between the camera and objects in the scene. There are two settings:

30 CM (default): Improves focus for scenes in which the camera is typically focusing on objects at close range (less than 3 meters).

3 M: Improves focus for scenes in which the camera is typically focusing on objects at a distance of 3 meters or more.

ZOOM FOCUS TRACE

Zoom focus trace adjusts the camera’s focus so it follows the predefined focus values that are associated with respective zoom values. This keeps the scene in focus during quick zoom in and zoom out operations.

NOTE: You might see a short delay when you initiate a zoom operation if zoom focus trace and auto focus are enabled.

There are three settings:

NIGHT (default): Applies zoom focus trace in dark scenes.

DAY/NIGHT: Applies zoom focus trace in both light and dark scenes.

OFF: Disables the zoom focus trace.

EXIT

SPECTRA IV

LANGUAGE

<SYSTEM INFORMATION>

<DISPLAY SETUP>

<DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

<CAMERA>

<MOTION>

<AUTO TRACKING>

<POWER UP>

<LINE SYNC>

<PRESETS>

<PATTERNS>

<ZONES>

<WINDOW BLANKING>

<ALARMS>

<AUX>

<TITLE TEXT>

<ALERT>*

<CLEAR>

<PASSWORD>

<CLOCK>

<EVENT>

BACK

EXIT

DOME SETTINGS

AUTO FLIP

PROPORTIONAL PAN

PARK TIME (MINUTES)

PARK ACTION

SCAN SPEED (DEG/S)

PRESET FREEZE FRAME

LIMIT STOPS

<SET MANUAL STOPS>

<CLEAR MANUAL STOPS>

<SET SCAN STOPS>

<CLEAR SCAN STOPS>

<SET AZIMUTH ZERO>

<CLEAR AZIMUTH ZERO>

BACK

EXIT

REFERENCE INFORMATION

MANUAL LIMITS SET

SCAN LIMITS SET

MOTION

MOTION SETTINGS

*This setting applies to Pressurized Spectra IV dome systems only.

AUTO FLIP

When the camera tilts downward and goes just beyond the vertical position, the dome rotates 180 degrees.