Drawings - Electrical E2.1 E2.2 E3.1.pdf
PDF 688 KB Posted
- Solicitation number
- IFB1 IHKA 2017000258 4
- Issued by
- Garfield County, Colorado
About this file
This file contains electrical construction drawings and panel schedules for the SVCLC at Rifle Resident Safety & Accessibility Improvements project, prepared by Boulder Associates, Inc. for a facility located at 851 E. 5th Street, Rifle, Colorado 81650. The project represents 100% construction documents dated February 1, 2017, with revisions as of March 28, 2017. The electrical work encompasses Floor 1 and Floor 2 lighting plans (sheets E2.1 and E2.2) and detailed panel schedules (sheet E3.1) for multiple electrical panels including LP1A, LP1B, EL1, EL2, LP2A, and LP2B. The scope includes installation of new lighting fixtures, emergency egress luminaires, occupancy sensors (Watt Stopper DT-300-W with BZ-150 power packs), ceiling-mounted switches, and associated electrical circuitry modifications. Work notes specify requirements for intercepting and extending existing circuits, removing abandoned cabling and conduits, verifying existing circuitry connections, and updating panelboard directories. The contractor is required to conduct a pre-construction site survey to verify existing conditions prior to work commencement.
The panel schedules detail load calculations and demand factors for existing and new electrical loads across all panels, with connected loads ranging from approximately 7,226 VA to 28,159 VA depending on the panel. All new work is shown with solid bold lines while existing work appears as light lines, with dashed lines indicating removals. The drawings specify NEC compliance requirements including individual neutrals on all new and existing circuits, proper support of conduits and luminaires per NEC 300.11, and connection of all exit and emergency egress luminaires to existing 120-volt emergency circuits. General notes require contractors to protect fixtures throughout construction, identify junction boxes with panel and circuit numbers, and program occupancy sensors to manual on/auto off with timing per owner requirements. The drawings are instruments of service owned by the engineer and require written permission for reuse or extension.
View the file
Other files
Show all 19
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A
B
C
D
E
F
G
H H
H.6 H.6
J.7 J.7
L L
L.4 L.4
M M
91011121314.2
15.317
P P
Q
R
SY1
Y2
X2
X1
7.68.18.38.79.211.512.4141516
B
BE
B
B
BE
B
B
BE
B
B
BE
B
B
BE
A1E A1 A2
A2
A2
A2
A2
A2
A2
A2E
A2
A1
A1A1
A1 A1E
A1A1A1E
BE B B BE B B BE B B BE B B BE B
A1
A1E
A1
A1
BE
A1
A1
A1E
L11
LR4
LR3
L12
L13L13 L1 L2
L17
L12L9
L9
L14 L15 L16
PNL 'EL1'
PNL 'RP1A'
PNL 'LP1A'
PNL 'LP1B'
PNL 'RP1B'
L1
L17
L1 L2
L17
L1
L17
L18
L19
L20
L2L2
L1L1
EL1-24
GE
GE
D
L21
1C
CEILING MOUNTED SWITCHES
OS - WATT STOPPER DT-300-W DUAL TECHNOLOGY CEILING MOUNTED OCCUPANCY
SENSOR WITH BZ-150 POWER PACK.
NOTE: CONTRACTOR SHALL PROGRAM SENSORS TO BE CONTROLLED MANUAL
ON/AUTO OFF AND TIMED PER OWNER'S REQUIREMENTS.
OWNERSHIP OF DOCUMENTS:
ALL DRAWINGS, SPECIFICATIONS AND OTHER WORK PRODUCT OF THE ENGINEER FOR THIS PROJECT ARE INSTRUMENTS OF SERVICE FOR THIS PROJECT ONLY AND SHALL REMAIN THE PROPERTY OF THE ENGINEER WHETHER THE PROJECT IS COMPLETED OR NOT. REUSE OF ANY OF THE INSTRUMENTS OF SERVICE OF THE ENGINEER BY THE OWNER OF EXTENSIONS OF THIS PROJECT WITHOUT WRITTEN PERMISSION OF THE ENGINEER SHALL BE AT THE OWNER'S RISK AND THE OWNER AGREES TO DEFEND, INDEMNIFY AND HOLD HARMLESS THE ENGINEER FROM ALL CLAIMS, DAMAGES, AND EXPENSES INCLUDING ATTORNEYS' FEES ARISING OUT OF UNAUTHORIZED REUSE OF THE ENGINEER'S INSTRUMENTS OF SERVICE BY THE OWNER OR BY OTHERS ACTING THROUGH THE OWNER.
PROJECT NUMBER
DRAWN BY
DATE
REVISIONS
SHEET TITLE
SHEET NUMBER
Boulder Associates, Inc.
www.boulderassociates.com
Architecture + Interior Design
1426 Pearl Street, Suite 300
Boulder , Colorado 80302
303.499.7795
PROJECT
REV
T T
L B v .2
T H
IS
L
IN
E
I S
I N
C H
L O
N G
W H
E N
P R
IN
T
E D
T O
F U
L L S
C A
L E
ADDRESS
851 E. 5th STREET
RIFLE, CO 81650
/2
/2
:3 :3
P
M C
U s e rs
\r le d fo rd \D o c u m e n ts
\L o c a l R e v it F ile s \1
S V
N H a t R if le
E le c
R rl e d fo rd .r v t
152732.00
RSL
February 1, 2017
FLOOR 1 -
LIGHTING PLAN
E2.1
SVCLC AT RIFLE
RESIDENT
SAFETY &
ACCESSIBILITY
IMPROVEMENTS
100%
CONSTRUCTION
DOCUMENTS
0'2' 4' 10'
3/32" = 1'-0"
FLOOR 1 - LIGHTING PLAN
13. PROVIDE INDIVIDUAL NEUTRALS AS REQUIRED BY NEC ON ALL NEW AND EXISTING
CIRCUITS.
12. CONNECT ALL EXIT AND EMERGENCY EGRESS LUMINAIRES (DENOTED BY SHADING)
TO EXISTING 120-VOLT EMERGENCY EGRESS CIRCUIT SERVING THE AREA.
11. PROTECT FIXTURES THROUGHOUT CONSTRUCTION.
10. IDENTIFY JUNCTION BOXES WITH PANEL AND CIRCUIT NUMBER.
9. DRAWINGS ARE DIAGRAMMATIC AND DO NOT SHOW EXACT LOCATIONS OF DEVICES
AND EQUIPMENT. REFER TO ARCHITECTURAL DRAWING FOR EXACT LOCATIONS.
8. SUPPORT ALL CONDUITS, CABLES, BOXES AND LUMINAIRES FROM STRUCTURE PER
NEC 300.11. LAY-IN FIXTURES SHALL BE SUPPORTED WITH TWO #12AWG WIRES FROM
OPPOSITE ENDS UNLESS NOTED OTHERWISE.
7. REMOVED ABANDONED CABLING TO SOURCE.
6. REMOVED ADANDONED CONDUITS AND CONDUCTORS TO SOURCE. DO NOT LEAVE
WIRES CONNECT TO SPARE BREAKERS.
5. EXISTING ELECTRICAL OUTLET, DEVICE, EQUIPMENT ITEM, LUMINAIRE, ETC., (SHOWN
AS DASHED) SHALL BE REMOVED TO THE NEAREST REMAINING OUTLET OR BRANCH
CIRCUIT OVER-CURRENT DEVICE. MAKE MODIFICATION TO EXISTING REMAINING...
4. CONTRACTOR TO VISIT THE JOB SITE TO SURVEY EXISTING CONDITIONS PRIOR TO
START OF CONSTRUCTION.
3. PANEL SCHEDULE INFORMATION AND EXISTING CIRCUITRY WAS TAKEN FROM
EXISTING PANEL DIRECTORIES AND PLANS. ACTUAL CONDITIONS MAY VARY. FIELD
VERIFY.
2. CONTRACTOR TO UPDATE PANELBOARD DIRECTORIES WHERE CIRCUITS HAVE BEEN
DELETED OR ADDED.
1. ALL NEW WORK IS SHOWN BY SOLID BOLD LINES; ALL EXISTING WORK IS SHOWN AS
LIGHT LINES. DASHED LINES INDICATES REMOVAL. (CIRCUIT DESIGNATIONS SHOWN
IN PARENTHESIS INDICATE CIRCUITS BEING REMOVED.)
GENERAL NOTES
WORK NOTES
L1 INTERCEPT AND EXTEND EXISTING EMERGENCY CIRCUIT FROM NEW LUMINAIRE
TO EXISTING EMERGENCY LUMINAIRE. TYPICAL FOR ALL EMERGENCY
LUMINAIRES THIS TYPE.
L2 INTERCEPT AND EXTEND EXISTING CIRCUIT FROM NEW LUMINAIRE TO EXISTING
LUMINAIRE. TYPICAL FOR ALL LUMINAIRES THIS TYPE.
L9 CONTRACTOR TO VERIFY EXISTING CIRCUITRY CONNECTIONS TO THE PREVIOUS
LUMINAIRE FOR FUTURE RECONNECTION PURPOSES TO NEW LUMINAIRE.
L11 INTERCEPT AND EXTEND EXISTING EMERGENCY CIRCUIT FROM REMOVED
EMERGENCY LUMINAIRE TO NEW EMERGENCY LUMINAIRE. CONTRACTOR TO
VERIFY EXISTING CIRCUITY ON PANEL EL1-29.
L12 CONTRACTOR TO VERIFY EXISTING CIRCUITRY CONNECTION FROM PREVIOUS
LUMINAIRE TO VERIFY NEW LUMINAIRE(S) ON PANEL LP1A-31. SEE E3.1 - PANEL
SCHEDULES, PANEL LP1A,
L13 PROVIDE NEW EMERGENCY LIGHTING, THIS LOCATION. INTERCEPT AND EXTEND
EXISTING EMERGENCY CIRCUIT FROM NEW EMERGENCY LUMINAIRE.
L14 INTERCEPT AND EXTEND EXISTING EMERGENCY CIRCUIT FROM NEW LUMINAIRE
TO EXISTING EMERGENCY LUMINAIRE. CONTRACTOR TO VERIFY EXISTING
CIRCUITRY ON PANEL EL1-5,7,9.
L15 INTERCEPT AND EXTEND EXISTING CIRCUIT FROM NEW LUMINAIRE TO EXISTING
LUMINAIRE. CONTRACTOR TO VERIFY CIRCUITRY ON PANEL LP1A-8,10,12.
L16 INTERCEPT AND EXTEND EXISTING EMERGENCY CIRCUIT FROM NEW LUMINAIRE
BACK TO PANEL EL1-12. CONTRACTOR TO VERIFY EXISTING CIRCUITRY ON
PANEL EL1-8,10,12.
L17 INTERCEPT AND EXTEND EXISTING CIRCUIT FROM NEW LUMINAIRE TO NEW
LUMINAIRE. TYPICAL FOR ALL LUMINAIRES THIS TYPE.
L18 INTERCEPT AND EXTEND EXISTING EMERGENCY CIRCUIT FROM NEW LUMINAIRE
TO EXISTING EMERGENCY LUMINAIRE. CONTRACTOR TO VERIFY EXISTING
CIRCUITRY ON PANEL EL1-2,4,6.
L19 INTERCEPT AND EXTEND EXISTING CIRCUIT FROM NEW LUMINAIRE TO EXISTING
EQUIPMENT. CONTRACTOR TO VERIFY EXISTING CIRCUITRY ON PANEL LP1B-7,9.
L20 INTERCEPT AND EXTEND EXISTING CIRCUIT FROM NEW LUMINAIRE TO EXISTING
LUMINAIRE. CONTRACTOR TO VERIFY CIRCUITRY ON PANEL LP1B-14,16,18.
L21 PROVIDE A COMPATIBLE DIMMER SWITCH TO LOUNGE AREA.
LR3 REMOVE EXISTING 2'x4' FIXTURE THIS ROOM AND REPLACE WITH NEW 2'x4'
LUMINAIRE.
LR4 REMOVE EXISTING FIXTURE AND INSTALL NEW 2'x2' LUMINAIRE. INTERCEPT AND
EXTEND EXISTING CIRCUIT TO NEW LUMINAIRE. CONTRACTOR TO VERIFY NEW
LUMINAIRE CONNECTS TO PANEL LP1A-33.
DESCRIPTION DATE
1 C-WEST COMMENTS 03.28.2017
0'4' 2' 4' 8' 16'
12" = 1'-0"
OCCUPANCY SENSOR LEGEND
M
P
A
B
C
D
E
F
G
H H
H.6 H.6
J.7 J.7
L L
L.4 L.4
M M
12345678
91011121314.2
15.317
P P
Q
R
S
T T
Y1
Y2
X2
X1
7.68.18.38.79.211.512.4141516
C
CE
C
C
CE
C
C
CE
C
C
CE
C
C
CE
A1E A1
A2
A2
A2
A2
A2
A2
A1
A1A1
A1 A1E
CE C C CE C C CE C C CE C C CE C
A1
A1A1E
A1
A1E
E1.1
A1
A1E
P1
E1.1
L1
L2L2
L2
L1
L2
L1
L2
L1
L2
L2
PNL 'LP2A'
PNL 'RP2A'
PNL 'EL2'
PNL 'LP2B'
PNL 'RP2B'
L3 L9L9
L4
L5
L6
L7
L8
L1
L2
L2L1
L10
D
EL2-14
GE
GE
D
L21
1C
CEILING MOUNTED SWITCHES
OS - WATT STOPPER DT-300-W DUAL TECHNOLOGY CEILING MOUNTED OCCUPANCY
SENSOR WITH BZ-150 POWER PACK.
NOTE: CONTRACTOR SHALL PROGRAM SENSORS TO BE CONTROLLED MANUAL
ON/AUTO OFF AND TIMED PER OWNER'S REQUIREMENTS.
OWNERSHIP OF DOCUMENTS:
ALL DRAWINGS, SPECIFICATIONS AND OTHER WORK PRODUCT OF THE ENGINEER FOR THIS PROJECT ARE INSTRUMENTS OF SERVICE FOR THIS PROJECT ONLY AND SHALL REMAIN THE PROPERTY OF THE ENGINEER WHETHER THE PROJECT IS COMPLETED OR NOT. REUSE OF ANY OF THE INSTRUMENTS OF SERVICE OF THE ENGINEER BY THE OWNER OF EXTENSIONS OF THIS PROJECT WITHOUT WRITTEN PERMISSION OF THE ENGINEER SHALL BE AT THE OWNER'S RISK AND THE OWNER AGREES TO DEFEND, INDEMNIFY AND HOLD HARMLESS THE ENGINEER FROM ALL CLAIMS, DAMAGES, AND EXPENSES INCLUDING ATTORNEYS' FEES ARISING OUT OF UNAUTHORIZED REUSE OF THE ENGINEER'S INSTRUMENTS OF SERVICE BY THE OWNER OR BY OTHERS ACTING THROUGH THE OWNER.
PROJECT NUMBER
DRAWN BY
DATE
REVISIONS
SHEET TITLE
SHEET NUMBER
Boulder Associates, Inc.
www.boulderassociates.com
Architecture + Interior Design
1426 Pearl Street, Suite 300
Boulder , Colorado 80302
303.499.7795
PROJECT
REV
T T
L B v .2
T H
IS
L
IN
E
I S
I N
C H
L O
N G
W H
E N
P R
IN
T
E D
T O
F U
L L S
C A
L E
ADDRESS
851 E. 5th STREET
RIFLE, CO 81650
/2
/2
:3 :3
P
M C
U s e rs
\r le d fo rd \D o c u m e n ts
\L o c a l R e v it F ile s \1
S V
N H a t R if le
E le c
R rl e d fo rd .r v t
152732.00
RSL
February 1, 2017
FLOOR 2 -
LIGHTING PLAN
E2.2
SVCLC AT RIFLE
RESIDENT
SAFETY &
ACCESSIBILITY
IMPROVEMENTS
100%
CONSTRUCTION
DOCUMENTS
0'2' 4' 10'
3/32" = 1'-0"
FLOOR 2 - LIGHTING PLAN
13. PROVIDE INDIVIDUAL NEUTRALS AS REQUIRED BY NEC ON ALL NEW AND EXISTING
CIRCUITS.
12. CONNECT ALL EXIT AND EMERGENCY EGRESS LUMINAIRES (DENOTED BY SHADING)
TO EXISTING 120-VOLT EMERGENCY EGRESS CIRCUIT SERVING THE AREA.
11. PROTECT FIXTURES THROUGHOUT CONSTRUCTION.
10. IDENTIFY JUNCTION BOXES WITH PANEL AND CIRCUIT NUMBER.
9. DRAWINGS ARE DIAGRAMMATIC AND DO NOT SHOW EXACT LOCATIONS OF DEVICES
AND EQUIPMENT. REFER TO ARCHITECTURAL DRAWING FOR EXACT LOCATIONS.
8. SUPPORT ALL CONDUITS, CABLES, BOXES AND LUMINAIRES FROM STRUCTURE PER
NEC 300.11. LAY-IN FIXTURES SHALL BE SUPPORTED WITH TWO #12AWG WIRES FROM
OPPOSITE ENDS UNLESS NOTED OTHERWISE.
7. REMOVED ABANDONED CABLING TO SOURCE.
6. REMOVED ADANDONED CONDUITS AND CONDUCTORS TO SOURCE. DO NOT LEAVE
WIRES CONNECT TO SPARE BREAKERS.
5. EXISTING ELECTRICAL OUTLET, DEVICE, EQUIPMENT ITEM, LUMINAIRE, ETC., (SHOWN
AS DASHED) SHALL BE REMOVED TO THE NEAREST REMAINING OUTLET OR BRANCH
CIRCUIT OVER-CURRENT DEVICE. MAKE MODIFICATION TO EXISTING REMAINING...
4. CONTRACTOR TO VISIT THE JOB SITE TO SURVEY EXISTING CONDITIONS PRIOR TO
START OF CONSTRUCTION.
3. PANEL SCHEDULE INFORMATION AND EXISTING CIRCUITRY WAS TAKEN FROM
EXISTING PANEL DIRECTORIES AND PLANS. ACTUAL CONDITIONS MAY VARY. FIELD
VERIFY.
2. CONTRACTOR TO UPDATE PANELBOARD DIRECTORIES WHERE CIRCUITS HAVE BEEN
DELETED OR ADDED.
1. ALL NEW WORK IS SHOWN BY SOLID BOLD LINES; ALL EXISTING WORK IS SHOWN AS
LIGHT LINES. DASHED LINES INDICATES REMOVAL. (CIRCUIT DESIGNATIONS SHOWN
IN PARENTHESIS INDICATE CIRCUITS BEING REMOVED.)
GENERAL NOTES
WORK NOTES
L1 INTERCEPT AND EXTEND EXISTING EMERGENCY CIRCUIT FROM NEW LUMINAIRE
TO EXISTING EMERGENCY LUMINAIRE. TYPICAL FOR ALL EMERGENCY
LUMINAIRES THIS TYPE.
L2 INTERCEPT AND EXTEND EXISTING CIRCUIT FROM NEW LUMINAIRE TO EXISTING
LUMINAIRE. TYPICAL FOR ALL LUMINAIRES THIS TYPE.
L3 INTERCEPT AND EXTEND EXISTING EMERGENCY CIRCUIT FROM NEW LUMINAIRE
TO EXISTING EMERGENCY LUMINAIRE. CONTRACTOR TO VERIFY EXISTING
CIRCUITRY ON PANEL EL2-1,3,5
L4 INTERCEPT AND EXTEND EXISTING CIRCUIT FROM NEW LUMINAIRE TO EXISTING
LUMINAIRE. CONTRACTOR TO VERIFY CIRCUITRY ON PANEL LP2A-8,10,12.
L5 INTERCEPT AND EXTEND EXISTING CIRCUIT FROM NEW LUMINAIRE TO EXISTING
LUMINAIRE. CONTRACTOR TO VERIFY CIRCUITRY ON PANEL LP2B-14,16,18.
L6 INTERCEPT AND EXTEND EXISTING EMERGENCY CIRCUIT FROM NEW LUMINAIRE
BACK TO PANEL EL2-7. CONTRACTOR TO VERIFY EXISTING CIRCUITRY ON PANEL
EL2-7,9,11.
L7 INTERCEPT AND EXTEND EXISTING CIRCUIT FROM NEW LUMINAIRE TO EXISTING
EQUIPMENT. CONTRACTOR TO VERIFY EXISTING CIRCUITRY ON PANEL LP2B-7,9.
L8 INTERCEPT AND EXTEND EXISTING EMERGENCY CIRCUIT FROM NEW LUMINAIRE
TO EXISTING EMERGENCY LUMINAIRE. CONTRACTOR TO VERIFY EXISTING
CIRCUITRY ON PANEL EL2-2, 4, 6.
L9 CONTRACTOR TO VERIFY EXISTING CIRCUITRY CONNECTIONS TO THE PREVIOUS
LUMINAIRE FOR FUTURE RECONNECTION PURPOSES TO NEW LUMINAIRE.
L10 CONTRACTOR TO VERIFY WITH ARCHITECT THE EXACT LOCATION OF DIMMER
SWITCH ON WALL. CONTRACTOR TO PROVIDE NEW CONDUIT, WIRING, AND
CONNECTIONS FROM NEW FLUSH MOUNTED FLAGPOLE UPWARD LIGHT TO
SWITCH.
L21 PROVIDE A COMPATIBLE DIMMER SWITCH TO LOUNGE AREA.
P1 INTERCEPT AND EXTEND EXISTING CIRCUITING TO NEW SLIDING DOOR MOTOR.
CONTRACTOR TO PROVIDE ALL CONDUIT AND POWER REQUIREMENTS FOR
SLIDING DOORS. CONTRACTOR TO VERIFY EXISTING CIRCUITING AS LP2A-18 IF
NOT THEN PROVIDE A DEDICATED HOMERUN FROM MOTOR TO AN AVAILABLE
CIRCUIT ON PANEL LP2A. COORDINATE WITH ARCHITECT AND EQUIPMENT
VENDOR FOR EXACT REQUIREMENTS.
DESCRIPTION DATE
1 C-WEST COMMENTS 03.28.2017
0'4' 2' 4' 8' 16'
12" = 1'-0"
OCCUPANCY SENSOR LEGEND
[1]
[1]
[1]
PANEL:
AMPACITY
AIC RATING
VOLTAGE
TYP
L
L
L
L
L
M
L
R
L
L
E
M
E
E
L
L
L
L
LOAD TYPE
LIGHTING
REC
LARGEST MOTORS
REMAINING MOTORS
EQUIPMENT
HEATING
PANEL
TRANSFORMER
KITCHEN
TOTAL
PHASE LOADING
A=
B=
C=
[1] NEW LOAD ON EXISTING SPARE BREAKER.
VA
1st 10 KVA
REMAINING
10404
12319
LP1A (EXISTING)
DESCRIPTION
VA
VA
VA
10,000
120/208 VOLT, 3 PH
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
LTG SE CORR IN-FRNT NURSE STA
LTG SE NURSE STATION
LTG PORTE COCHERE/WALKWAY
SPARE
SPARE
SPARE
AMPS
AMPS
CONNECTED LOAD
(VA)
19854
31524
DERATED DEMAND LOAD
SPARE CAPACITY
TOTAL
P
CB
DEMAND FACTOR
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
CKT
PH
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
CKT
CB
DEMAND LOAD (VA)
19854
31524
X
X
X
X
P
DESCRIPTION
100% NEUTRAL
GROUND
MAIN CB SIZE:
SURFACE
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
LTG SE CORRIDOR
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
LTG SITE/BOLLARD/FLAG
EXISTING LOAD
EXISTING LOAD
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
32%
NEC
1.25
1.0
0.5
1.25
1.0
1.0
1.25
1.0
1.0
1.0
150 AMP
VA
DERATED
DEMAND
LOAD (VA)
24818
36675
AMPS
AMPS
AMPS
TYP
L
L
L
L
L
L
L
R
R
L
L
L
[1]
[1]
[1]
[2]
PANEL:
AMPACITY
AIC RATING
VOLTAGE
TYP
E
E
L
L
L
E
M
M
R
E
M
L
LOAD TYPE
LIGHTING
REC
LARGEST MOTORS
REMAINING MOTORS
EQUIPMENT
HEATING
PANEL
TRANSFORMER
KITCHEN
TOTAL
PHASE LOADING
A=
B=
C=
[1] NEW LOAD ON EXISTING CIRCUIT.
[2] NEW LOAD ON NEW CIRCUIT BREAKER. PROVIDE NEW BREAKER TO MATCH EXISTING AIC.
VA
1st 10 KVA
REMAINING
10345
EL1 (EXISTING)
DESCRIPTION
VA
VA
VA
10,000
120/208 VOLT, 3 PH
EXISTING LOAD
EXISTING LOAD
LTG SE CORRIDOR
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
SPARE
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
SPACE
SPACE
SE NURSE STATION
AMPS
AMPS
CONNECTED LOAD
(VA)
10283
11595
28513
DERATED DEMAND LOAD
SPARE CAPACITY
TOTAL
P
CB
DEMAND FACTOR
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
CKT
PH
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
CKT
CB
DEMAND LOAD (VA)
10283
11595
28513
X
X
X
X
P
DESCRIPTION
100% NEUTRAL
GROUND
MAIN CB SIZE:
SURFACE
LTG SW CORRIDOR
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
CTR NURSE STA/MAIN
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
LTG COURT ENTRY
PANEL ''EL2''
13%
NEC
1.25
1.0
0.5
1.25
1.0
1.0
1.25
1.0
1.0
1.0
100 AMP
VA
11595
DERATED
DEMAND
LOAD (VA)
12854
11595
31291
AMPS
AMPS
AMPS
TYP
L
L
L
L
L
L
R
R
R
R
E
L
P
[1]
[1]
[1]
[1]
[1]
PANEL:
AMPACITY
AIC RATING
VOLTAGE
TYP
L
L
L
L
L
M
L
L
L
R
R
R
LOAD TYPE
LIGHTING
REC
LARGEST MOTORS
REMAINING MOTORS
EQUIPMENT
HEATING
PANEL
TRANSFORMER
KITCHEN
TOTAL
PHASE LOADING
A=
B=
C=
[1] NEW LOAD ON EXISTING CIRCUIT.
VA
1st 10 KVA
REMAINING
LP1B (EXISTING)
DESCRIPTION
VA
VA
VA
10,000
120/208 VOLT, 3 PH
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
LTG SE CORRIDOR
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
SPARE
SPARE
SPARE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
AMPS
AMPS
CONNECTED LOAD
(VA)
17131
27981
DERATED DEMAND LOAD
SPARE CAPACITY
TOTAL
P
CB
DEMAND FACTOR
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
CKT
PH
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
CKT
CB
DEMAND LOAD (VA)
17131
27981
X
X
X
X
P
DESCRIPTION
100% NEUTRAL
GROUND
MAIN CB SIZE:
SURFACE
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
LTG MAIN NURSE STA/CTR CORR
LTG LOWER LOBBY
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
SPARE
SPARE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
9%
NEC
1.25
1.0
0.5
1.25
1.0
1.0
1.25
1.0
1.0
1.0
100 AMP
VA
DERATED
DEMAND
LOAD (VA)
21414
32626
AMPS
AMPS
AMPS
TYP
L
L
L
L
L
L
L
L
L
M
E
M
R
[1]
[1]
[1]
[1]
PANEL:
AMPACITY
AIC RATING
VOLTAGE
TYP
L
L
L
L
L
E
L
LOAD TYPE
LIGHTING
REC
LARGEST MOTORS
REMAINING MOTORS
EQUIPMENT
HEATING
PANEL
TRANSFORMER
KITCHEN
TOTAL
PHASE LOADING
A=
B=
C=
[1] NEW LOAD ON EXISTING BREAKER.
VA
1st 10 KVA
REMAINING
EL2 (EXISTING)
DESCRIPTION
VA
VA
VA
10,000
120/208 VOLT, 3 PH
SPARE
EXISTING LOAD
EXISTING LOAD
LTG NURSE STA./CTR CORRIDOR
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
LTG WALKWAY
SPARE
SPACE
SPACE
SPACE
AMPS
AMPS
CONNECTED LOAD
(VA)
DERATED DEMAND LOAD
SPARE CAPACITY
TOTAL
P
CB
DEMAND FACTOR
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
CKT
PH
A
B
C
A
B
C
A
B
C
A
B
C
CKT
CB
DEMAND LOAD (VA)
X
X
X
X
P
DESCRIPTION
100% NEUTRAL
GROUND
MAIN CB SIZE:
SURFACE
LTG 2ND FLR SW CORRIDOR
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
LTG 2ND FLR COURT ENTRY
SPARE
SPARE
SPACE
SPACE
SPACE
35%
NEC
1.25
1.0
0.5
1.25
1.0
1.0
1.25
1.0
1.0
1.0
50 AMP
VA
DERATED
DEMAND
LOAD (VA)
11700
AMPS
AMPS
AMPS
TYP
L
L
L
M
M
R
L
[1]
[1]
PANEL:
AMPACITY
AIC RATING
VOLTAGE
TYP
L
L
L
M
M
L
L
L
L
L
R
R
R
R
R
R
R
R
LOAD TYPE
LIGHTING
REC
LARGEST MOTORS
REMAINING MOTORS
EQUIPMENT
HEATING
PANEL
TRANSFORMER
KITCHEN
TOTAL
PHASE LOADING
A=
B=
C=
[1] NEW LOAD ON EXISITNG BREAKER.
VA
1st 10 KVA
REMAINING
LP2A (EXISTING)
DESCRIPTION
VA
VA
VA
10,000
120/208 VOLT, 3 PH
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
LIBRARY
BATHROOM
ICE CREAM
BEAUTY SHOP
OFFICE 213 Z
BEAUTY SHOP
SPACE
SPACE
SPACE
AMPS
AMPS
CONNECTED LOAD
(VA)
14519
28159
DERATED DEMAND LOAD
SPARE CAPACITY
TOTAL
P
CB
DEMAND FACTOR
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
CKT
PH
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
CKT
CB
DEMAND LOAD (VA)
14519
28159
X
X
X
X
P
DESCRIPTION
100% NEUTRAL
GROUND
MAIN CB SIZE:
SURFACE
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
2ND FLR HALLWAY
EXISTING LOAD
EXISTING LOAD
RCPTS, SLIDING DOOR
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
HP-2
HP-2
11%
NEC
1.25
1.0
0.5
1.25
1.0
1.0
1.25
1.0
1.0
1.0
100 AMP
VA
DERATED
DEMAND
LOAD (VA)
18149
32194
AMPS
AMPS
AMPS
TYP
L
L
L
L
L
L
R
R
R
L
L
L
L
L
L
R
R
M
M
[1]
[1]
[1]
PANEL:
AMPACITY
AIC RATING
VOLTAGE
TYP
L
L
L
L
L
L
M
E
R
R
LOAD TYPE
LIGHTING
REC
LARGEST MOTORS
REMAINING MOTORS
EQUIPMENT
HEATING
PANEL
TRANSFORMER
KITCHEN
TOTAL
PHASE LOADING
A=
B=
C=
[1] NEW LOAD ON EXISTING CIRCUIT.
VA
1st 10 KVA
REMAINING
LP2B (EXISTING)
DESCRIPTION
VA
VA
VA
10,000
120/208 VOLT, 3 PH
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
LTG SW CORRIDOR
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
SPARE
SPARE
SPARE
SPARE
SPARE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
AMPS
AMPS
CONNECTED LOAD
(VA)
17668
25643
DERATED DEMAND LOAD
SPARE CAPACITY
TOTAL
P
CB
DEMAND FACTOR
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
CKT
PH
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
CKT
CB
DEMAND LOAD (VA)
17668
25643
X
X
X
X
P
DESCRIPTION
100% NEUTRAL
GROUND
MAIN CB SIZE:
SURFACE
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
EXISTING LOAD
SPARE
SPARE
SPARE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
16%
NEC
1.25
1.0
0.5
1.25
1.0
1.0
1.25
1.0
1.0
1.0
100 AMP
VA
DERATED
DEMAND
LOAD (VA)
22085
30229
AMPS
AMPS
AMPS
TYP
L
L
L
L
L
L
L
L
L
R
R
R
[1]
[1]
OWNERSHIP OF DOCUMENTS:
ALL DRAWINGS, SPECIFICATIONS AND OTHER WORK PRODUCT OF THE ENGINEER FOR THIS PROJECT ARE INSTRUMENTS OF SERVICE FOR THIS PROJECT ONLY AND SHALL REMAIN THE PROPERTY OF THE ENGINEER WHETHER THE PROJECT IS COMPLETED OR NOT. REUSE OF ANY OF THE INSTRUMENTS OF SERVICE OF THE ENGINEER BY THE OWNER OF EXTENSIONS OF THIS PROJECT WITHOUT WRITTEN PERMISSION OF THE ENGINEER SHALL BE AT THE OWNER'S RISK AND THE OWNER AGREES TO DEFEND, INDEMNIFY AND HOLD HARMLESS THE ENGINEER FROM ALL CLAIMS, DAMAGES, AND EXPENSES INCLUDING ATTORNEYS' FEES ARISING OUT OF UNAUTHORIZED REUSE OF THE ENGINEER'S INSTRUMENTS OF SERVICE BY THE OWNER OR BY OTHERS ACTING THROUGH THE OWNER.
PROJECT NUMBER
DRAWN BY
DATE
REVISIONS
SHEET TITLE
SHEET NUMBER
Boulder Associates, Inc.
www.boulderassociates.com
Architecture + Interior Design
1426 Pearl Street, Suite 300
Boulder , Colorado 80302
303.499.7795
PROJECT
REV
T T
L B v .2
T H
IS
L
IN
E
I S
I N
C H
L O
N G
W H
E N
P R
IN
T
E D
T O
F U
L L S
C A
L E
ADDRESS
851 E. 5th STREET
RIFLE, CO 81650
/2
/2
:3 :3
P
M C
U s e rs
\r le d fo rd \D o c u m e n ts
\L o c a l R e v it F ile s \1
S V
N H a t R if le
E le c
R rl e d fo rd .r v t
152732.00
RSL
February 1, 2017
PANEL
SCHEDULES
E3.1
SVCLC AT RIFLE
RESIDENT
SAFETY &
ACCESSIBILITY
IMPROVEMENTS
100%
CONSTRUCTION
DOCUMENTS
DESCRIPTION DATE
1 C-WEST COMMENTS 03.28.2017
| A0.1 Cover Sheet 2017-04-25 |
| CVCLC Rifle - Civil Set - 04252017 |
| Rifle SVCLC_Landscape_L1.0 |
| Rifle SVCLC_Landscape_L1.1 |
| Architectural Bid Set 2017-04-25 |
| Sheets |
| A0.0 - COVER SHEET |
| D1.1 - DEMO SITE PLAN |
| A1.0 - SITE PLAN |
| A1.1 - PORTE COCHERE - ENLARGED PLAN |
| A1.2 - PORTE COCHERE - ENLARGED PLANS & DETAILS |
| A2.01 - FLOOR 1 - LIFE SAFETY PLAN |
| A2.02 - FLOOR 2 - LIFE SAFETY PLAN |
| A2.1 - FLOOR PLAN - OVERALL - FIRST FLOOR |
| A2.2 - FLOOR PLAN - OVERALL - SECOND FLOOR |
| A3.1 - EXTERIOR ELEVATIONS |
| A4.1 - PORTE COCHERE - DETAILS |
| A6.1 - INTERIOR ELEVATION |
| A8.1 - DOOR & WINDOW TYPES, SCHEDULE & DETAILS |
| A9.1 - FLOOR 1 - REFLECTED CEILING PLAN |
| A9.2 - FLOOR 2 - REFLECTED CEILING PLAN |
| 17794 042517 |
| Sheets |
| S1.1 - PORTE COCHERE - GN & FRAMING |
| S1.2 - PORTE COCHERE - DETAILS |
File details come from the government source that posted it. Updated .